Tcode O4G1 requiring to execute recover function first. (Recover Delivery in menu)

Hi SAP SD gurus,
Need you help in tcode O4G1, when I tried executing my shipment document I got an error of "Error after saving of Shipment,during delivery update, correct and recover. The next step would be to to the Menu> Recover delivery and process would be successful.
What is the solution for this? Is there an exit or do I need to raise an OSS for this? Appreciate all the help and inputs in this T&D process. Thanks.

Hi Peter,
What is the shipment status? is it 2 or 4? can you please post the screenshot of the error message no?
Regards.

Similar Messages

  • Calling and executing a function module in the Portal iview development

    Hello Portal development gurus...
        I am very new to portal iview development and am learning a lot of stuff.. I now have a requirement to do the following:
      1. I need to use the NWDS to create java code in developing an iview
      2. I need to call and execute a function module and display the parameters pulled in from the function module onto a Jsp.
    3. I need to create an iview based on this deployed component.
    Could anybody please explain me how to do the coding on this front?
    I appreciate if anybody can share documentation about this kind of a development.
    As always, points galore for useful and helpful suggestions.
    Regards,
    ~~~LB

    Hi,
    Firstly Have you searched in SDN for the same, anyhow please go through the link to work on the requirement
    [/docs/DOC-8061#15|/docs/DOC-8061#15]
    Go through the thread which will talk in detail
    [https://forums.sdn.sap.com/click.jspa?searchID=19551584&messageID=6348955|https://forums.sdn.sap.com/click.jspa?searchID=19551584&messageID=6348955]
    Hope this helps.
    Cheers-
    Pramod

  • Error while executing the function

    hi,
    I have a table with the following data.
    T_1          T_2 T_3        T_4
    a.1            1 aa         ff
    a.1            2 ab         ff
    a.2            1 ba         ff
    a.2            2 bb         ff
    a.2            3 bc         ff
    a.2            4 bd         ff
    a.3            1 ca         ff
    a.3            3 cc         ff
    a.4            2 db         ffi want the data in the following way.
    col_1       col_2         col3
    a.1         1,2             aa ,ab
    a.2         1,2 ,3,4       ba,bb,bc,bd
    a.3         1,3             ca,cc
    a.4         2                db         For this , i have written a package as shown below.
    create or replace package t_emp_pkg as
    type typ_emp is record
    tv_t_1 t_Emp.t_1%type,
    tv_t_2 varchar2(20),
    tv_t_3 varchar2(20));
    type typ_emp_tab is table of typ_emp;
    function t_emp_func(pv_value in varchar2) return typ_emp_tab;
    end t_emp_pkg;
    create or replace package body t_emp_pkg as
    function t_emp_func(pv_value in varchar2) return typ_emp_Tab is
    cursor c1(v_value varchar2) is
    select distinct t_1 from t_emp where t_4 = v_value ;
    cursor c2(pv_t_1 varchar2) is
    select t_2,t_3 from t_emp
    where t_1 = pv_t_1;
    typ_emp_table typ_emp_tab := typ_emp_tab();
    t_count number := 0;
    c1_cur_rec c1%rowtype;
    c2_cur_rec c2%rowtype;
    v_temp_value1 varchar2(30);
    v_temp_value2 varchar2(30);
    begin
    open c1(pv_value);
    loop
    fetch c1 into c1_cur_rec;
    exit when c1%notfound;
    v_temp_value1 := null;
    v_temp_value2 := null;
    open c2(c1_cur_rec.t_1);
    loop
    fetch c2 into c2_cur_rec;
    exit when c2%notfound;
    v_temp_value1 := v_temp_value1||','||c2_cur_rec.t_2;
    v_temp_value2 := v_temp_value2||','||c2_cur_rec.t_3;
    end loop;
    --close c2;
    t_count := t_count+1;
    typ_emp_table(t_count).tv_t_1 := c1_cur_rec.t_1;
    typ_emp_table(t_count).tv_t_2 := v_temp_value1;
    typ_emp_table(t_count).tv_t_3 := v_temp_value2;
    --dbms_output.put_line(typ_emp_table(t_count).tv_t_1);
    --dbms_output.put_line(typ_emp_table(t_count).tv_t_2);
    --dbms_output.put_line(typ_emp_table(t_count).tv_t_3);
    end loop;
    close c1;
    return typ_emp_table;
    end;
    end;
    When i executed the function , i got the following error.
    SQL> declare
    2 v t_emp_pkg.typ_emp_tab := t_emp_pkg.typ_emp_tab();
    3 begin
    4 v := t_emp_pkg.t_emp_func('ff');
    5 for i in v.first..v.last loop
    6 dbms_output.put_line(v(i).tv_t_1 ||', '||v(i).tv_t_2||', '||v(i).tv_t_3);
    7 end loop;
    8 end;
    9 /
    declare
    ERROR at line 1:
    ORA-06533: Subscript beyond count
    ORA-06512: at "SCOTT.T_EMP_PKG", line 30
    ORA-06512: at line 4
    but when i am running this queries in anonymous block (i.e) using declare,begin,end , i am getting the data correctly.
      1  declare
      2  pv_value varchar2(5) := 'ff';
      3   cursor c1(v_value varchar2) is
      4  select distinct t_1 from t_emp where t_4 = v_value ;
      5  cursor c2(pv_t_1 varchar2) is
      6  select t_2,t_3 from t_emp
      7  where t_1 = pv_t_1;
      8  --typ_emp_table typ_emp_tab := typ_emp_tab();
      9  t_count number := 0;
    10  c1_cur_rec c1%rowtype;
    11  c2_cur_rec c2%rowtype;
    12  v_temp_value1 varchar2(300);
    13  v_temp_value2 varchar2(300);
    14  begin
    15  open c1(pv_value);
    16  loop
    17  fetch c1 into c1_cur_rec;
    18  exit when c1%notfound;
    19  v_temp_value1 := null;
    20  v_temp_value2 := null;
    21  open c2(c1_cur_rec.t_1);
    22  loop
    23  fetch c2 into c2_cur_rec;
    24  exit when c2%notfound;
    25  v_temp_value1 := v_temp_value1||','||c2_cur_rec.t_2;
    26  v_temp_value2 := v_temp_value2||','||c2_cur_rec.t_3;
    27  end loop;
    28  close c2;
    29  t_count := t_count+1;
    30  --typ_emp_table(t_count).tv_t_1 := c1_cur_rec.t_1;
    31  --typ_emp_table(t_count).tv_t_2 := v_temp_value1;
    32  --typ_emp_table(t_count).tv_t_3 := v_temp_value2;
    33  dbms_output.put_line(c1_cur_rec.t_1);
    34  dbms_output.put_line(v_temp_value1);
    35  dbms_output.put_line(v_temp_value2);
    36  end loop;
    37  close c1;
    38* end;
    39  /
    a.2
    ,1,2,3,4
    ,ba,bb,bc,bd
    a.3
    ,1,3
    ,ca,cc
    a.4
    ,2
    ,db
    a.1
    ,1,2
    ,aa,ab
    PL/SQL procedure successfully completed.So can anybody tell me why it is not executing correctly when executing as a function.
    Thanks in advance.

    hi devmiral,
    I am not sure exactly where i am making the mistake. I have modified the package but still i am getting the error.
    create or replace package body t_emp_pkg as
    function t_emp_func(pv_value in varchar2) return typ_emp_Tab is
    cursor c1(v_value varchar2) is
    select distinct t_1 from t_emp where t_4 = v_value ;
    cursor c2(pv_t_1 varchar2) is
    select t_2,t_3 from t_emp
    where t_1 = pv_t_1;
    typ_emp_table typ_emp_tab ;
    --:= typ_emp_tab();
    t_count number := 0;
    c1_cur_rec c1%rowtype;
    c2_cur_rec c2%rowtype;
    v_temp_value1 varchar2(30);
    v_temp_value2 varchar2(30);
    begin
    open c1(pv_value);
    loop
    fetch c1 into c1_cur_rec;
    exit when c1%notfound;
    v_temp_value1 := null;
    v_temp_value2 := null;
    open c2(c1_cur_rec.t_1);
    loop
    fetch c2 into c2_cur_rec;
    exit when c2%notfound;
    v_temp_value1 := v_temp_value1||','||c2_cur_rec.t_2;
    v_temp_value2 := v_temp_value2||','||c2_cur_rec.t_3;
    end loop;
    --close c2;
    t_count := t_count+1;
    typ_emp_table(t_count).tv_t_1 := c1_cur_rec.t_1;
    typ_emp_table(t_count).tv_t_2 := v_temp_value1;
    typ_emp_table(t_count).tv_t_3 := v_temp_value2;
    typ_emp_table := typ_emp_tab(c1_cur_rec.t_1,v_temp_value1,v_temp_value2);
    typ_emp_table.extend;
    end loop;
    close c1;
    return typ_emp_table;
    end;
    end;
    SQL> @t_emp_pkg_body.sql
    Warning: Package Body created with compilation errors.
    SQL> sho err
    Errors for PACKAGE BODY T_EMP_PKG:
    LINE/COL ERROR
    36/1     PL/SQL: Statement ignored
    36/18    PLS-00306: wrong number or types of arguments in call to
             'TYP_EMP_TAB'
    36/18    PLS-00306: wrong number or types of arguments in call to
             'TYP_EMP_TAB'
    36/18    PLS-00306: wrong number or types of arguments in call to
             'TYP_EMP_TAB'Thanks in advance.

  • ISSUE: "This domain controller must register a DNS SRV resource record, which is required for replication to function correctly"

    so we currently have three domain controllers set up, two of them on 2012r2 and one of them on 2008r2. prior to any of these domain controllers being added to the domain there was only one, running on 2003r2. the 2003r2 server was up and running when the
    first 2012r2 was added and that's when running 'dcdiag /e /c /v' would yield an issue with "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local" in the DNS portion of the diagnostics, specifically:
    TEST: Records registration (RReg)
    Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
    Error:
    Missing SRV record at DNS server 192.168.22.4:
    _ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
    after adding the second 2012r2 to the domain, this issue is still there... adding the 2008r2 server to the domain and running BPA it gives the following:
    Title:
    This domain controller must register a DNS SRV resource record, which is required for replication to function correctly
    Severity:
    Error
    Date:
    7/3/2014 11:24:48 AM
    Category:
    Configuration
    Issue:
    The "DcByGuid" DNS service (SRV) resource record that advertises this server as an available domain controller in the domain and ensures correct replication is not registered. All domain controllers (but not RODCs) in the domain must register this record.
    Impact:
    Other member computers and domain controllers in the domain or forest will not be able to locate this domain controller. This domain controller will not be able to provide a full suite of services.
    Resolution:
    Ensure that "DcByGuid" is not configured in the "DnsAvoidRegisteredRecords" list, either through Group Policy or through the registry. Restart the Netlogon service. Verify that the DNS service (SRV) resource record "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local", pointing to the local domain controller "CM-DC4-NY01.cmedia.local", is registered in DNS.
    More information about this best practice and detailed resolution procedures: http://go.microsoft.com/fwlink/?LinkId=126968
    I've tried scanning and then re-scanning every single entry in DNS Manager and do not see any reference to this specific GUID mentioned, nor do I see any other domain controllers referenced that should not be in there. The two 2012r2 and the 2008r2 domain
    controllers are the only ones listed in DNS Manager... the 2003r2 mentioned earlier failed and was removed.

    Just to chime in, I noticed that you said you have one 2008 R2 DC, and two 2012 DCs.
    I also noticed in the ipconfig /all that all DCs are pointint to themselves for DNS. We usually like to see them point to a partner, then itslelf as the second entry, w hether loopback or by its own IP.
    Based on that, what I suggest to level the playing field by choosing the WIndows 2008 R2 DC as the first DNS on all DCs and only administer DNS using that DC. The reason I chose that is because of the least common denominator is what we rather use so we
    don't invoke any new features in the newer 2012 DNS console that 2008 R2 may not understand.  After that's done, on each DC run (and you can use a PowerShell window to run this):
    Rename the system32\config\netlogon.dns and netlogon.dnb files by suffixing ".old" to the file.
    ipconfig /registerdns
    net stop netlogon
    net start netlogon
    Then re-run the dcdiag /e /c /v.
    Post your results, please.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.
    I thought the DNS entries were supposed to be the other way around? point to themselves first and a partner as secondary? regardless, as requested, I've changed it to what you've prescribed where they point to the 2008r2 server as the primary with themselves
    as the secondary. I've also followed the steps to what seems like refreshing the DNS? on each of the DCs. Here's the output from dcdiag /e /c /v
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    * Verifying that the local machine CM-DC1-NY01, is a Directory Server.
    Home Server = CM-DC1-NY01
    * Connecting to directory service on server CM-DC1-NY01.
    * Identified AD Forest.
    Collecting AD specific global data
    * Collecting site info.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory
    =ntDSSiteSettings),.......
    The previous call succeeded
    Iterating through the sites
    Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia
    ,DC=local
    Getting ISTG and options for the site
    * Identifying all servers.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=nt
    DSDsa),.......
    The previous call succeeded....
    The previous call succeeded
    Iterating through the list of servers
    Getting information for the server CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    Getting information for the server CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    Getting information for the server CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    * Identifying all NC cross-refs.
    * Found 3 DC(s). Testing 3 of them.
    Done gathering initial info.
    Doing initial required tests
    Testing server: Default-First-Site-Name\CM-DC1-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC1-NY01 passed test Connectivity
    Testing server: Default-First-Site-Name\CM-DC3-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC3-NY01 passed test Connectivity
    Testing server: Default-First-Site-Name\CM-DC4-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC4-NY01 passed test Connectivity
    Doing primary tests
    Testing server: Default-First-Site-Name\CM-DC1-NY01
    Starting test: Advertising
    The DC CM-DC1-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC1-NY01 is advertising as an LDAP server
    The DC CM-DC1-NY01 is advertising as having a writeable directory
    The DC CM-DC1-NY01 is advertising as a Key Distribution Center
    The DC CM-DC1-NY01 is advertising as a time server
    The DS CM-DC1-NY01 is advertising as a GC.
    ......................... CM-DC1-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local
    * SPN found :LDAP/CM-DC1-NY01
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local
    * SPN found :HOST/CM-DC1-NY01
    * SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
    [CM-DC1-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC1-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC1-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC1-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC1-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC1-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC1-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC1-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC1-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local
    * SPN found :LDAP/CM-DC1-NY01
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local
    * SPN found :HOST/CM-DC1-NY01
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
    ......................... CM-DC1-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC1-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC1-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC1-NY01\netlogon
    Verified share \\CM-DC1-NY01\sysvol
    ......................... CM-DC1-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC1-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC1-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC1-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC1-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 4609 to 5108
    * rIDPreviousAllocationPool is 4609 to 5108
    * rIDNextRID: 4629
    ......................... CM-DC1-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC1-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    A warning event occurred. EventID: 0x0000002F
    Time Generated: 07/08/2014 13:19:14
    Event String:
    Time Provider NtpClient: No valid response has been received from manually configured peer 0.ca.pool.ntp.org
    after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a n
    ew peer with this DNS name. The error was: The peer is unreachable.
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC1-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC1-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC1-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC1-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC1-NY01 passed test VerifyReplicas
    Testing server: Default-First-Site-Name\CM-DC3-NY01
    Starting test: Advertising
    The DC CM-DC3-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC3-NY01 is advertising as an LDAP server
    The DC CM-DC3-NY01 is advertising as having a writeable directory
    The DC CM-DC3-NY01 is advertising as a Key Distribution Center
    The DC CM-DC3-NY01 is advertising as a time server
    The DS CM-DC3-NY01 is advertising as a GC.
    ......................... CM-DC3-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC3-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local
    * SPN found :LDAP/CM-DC3-NY01
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local
    * SPN found :HOST/CM-DC3-NY01
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
    Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 2 servers
    Object is up-to-date on all servers.
    [CM-DC3-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC3-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC3-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC3-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC3-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC3-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC3-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC3-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC3-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC3-NY01 on DC CM-DC3-NY01.
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local
    * SPN found :LDAP/CM-DC3-NY01
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local
    * SPN found :HOST/CM-DC3-NY01
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
    ......................... CM-DC3-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC3-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC3-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC3-NY01\netlogon
    Verified share \\CM-DC3-NY01\sysvol
    ......................... CM-DC3-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC3-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC3-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC3-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC3-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 15109 to 15608
    * rIDPreviousAllocationPool is 15109 to 15608
    * rIDNextRID: 15110
    ......................... CM-DC3-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC3-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC3-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC3-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC3-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC3-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC3-NY01 passed test VerifyReplicas
    Testing server: Default-First-Site-Name\CM-DC4-NY01
    Starting test: Advertising
    The DC CM-DC4-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC4-NY01 is advertising as an LDAP server
    The DC CM-DC4-NY01 is advertising as having a writeable directory
    The DC CM-DC4-NY01 is advertising as a Key Distribution Center
    The DC CM-DC4-NY01 is advertising as a time server
    The DS CM-DC4-NY01 is advertising as a GC.
    ......................... CM-DC4-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC4-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local
    * SPN found :LDAP/CM-DC4-NY01
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local
    * SPN found :HOST/CM-DC4-NY01
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
    Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 2 servers
    Object is up-to-date on all servers.
    [CM-DC4-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC4-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC4-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC4-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC4-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC4-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC4-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC4-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC4-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC4-NY01 on DC CM-DC4-NY01.
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local
    * SPN found :LDAP/CM-DC4-NY01
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local
    * SPN found :HOST/CM-DC4-NY01
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
    ......................... CM-DC4-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC4-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC4-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC4-NY01\netlogon
    Verified share \\CM-DC4-NY01\sysvol
    ......................... CM-DC4-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC4-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC4-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC4-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC4-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 15609 to 16108
    * rIDPreviousAllocationPool is 15609 to 16108
    * rIDNextRID: 15609
    ......................... CM-DC4-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC4-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC4-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC4-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC4-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC4-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC4-NY01 passed test VerifyReplicas

  • I get an error when i try to execute a function that returns a date value

    Hi,
    I'm new in ODP.NET, i'm make a package that contains a function that returns a date i.e.
    Package Body General_pkg is
    Function Get_Day Return Date is
    vd_day date;
    Begin
    select sysdate into vd_day from dual;
    return vd_day;
    end Get_Day;
    End General_pkg;
    i use the next code to execute the function:
    OracleCommand cmdData = new OracleCommand("General_pkg.Get_Day", cnx);
    cmdData.CommandType = Commandtype.StoredProcedure;
    OracleParameter PRM;
    PRM = new OracleParameter();
    PRM.ParameterName = "VDATE";
    PRM.OracleDbType = OracleDbType.Date;
    PRM.Direction = ParameterDirection.ReturnValue;
    cmdData.Parameters.Add(PRM);
    try
    cmdData.ExecuteNonQuery();
    catch(OracleException e);
    When i execute this code, i have and exception, which say "identifier GENERAL_PKG.Get_Day must be declare..."
    Obviously the package is correctly created in ORACLE i tested first in sql plus and it works but in ODP.NET they don't recognize the package or the function i don't know... please help!!!

    OOOOOPSS.... i forgot that i change the user in my conecction string that's why it didn't work...
    i guess i had to much beer last night.;. :)
    thanks.

  • Execute a function after event

    Hi experts,
    i want to execute a function after a event. I give you an example:
    Zprogram1call function zfct1.
    While execution of function zfct1is running, zprogram2 call function same function zfct1.
    But it's possible that function execution  from zprogram2 to run only after function execution from zprogram1 is finished? I mean , function execution from zprogram2 to sart delayed...only when zfct1 is available,when it's not running in other process.
    Many thanks.
    Dan M.

    you can go for
    CALL FUNCTION func STARTING NEW TASK task
    and in the task id pass the same task name(any char variable of length max 8 chars).
    so, what happens here is :
    prog1 calls fct1 with task T1. (keeps running)
    prog2 calls fct1 with task T1.(same T1, so the second call can also access the global variables from first call).
    hence, you can have a global variable set to X in the fct1 before the update lines... and at the beginning of fct1 you can check that this global variable NE X. then only continue. else wait until that becomes blank
    i have never tried this, but giving you a theory. try implementing it..

  • Error while executing the function module BAPI_RE_CN_CREATE

    Dear All
    I was using the the function module BAPI_RE_CN_CREATE.  When I am trying to execute the function module I am getting the error message u201CBusiness transaction RECN doest existu201D. While inputting the parameters for the function module I have given RECN   In the input field TRANS. Requesting you to please kindly suggest.
    Regards.
    Varaprasad

    Hi Varaprasad,
    please try the following.
    1. Create a contract manually in the system
    2. Use BAPI_RE_CN_GET_DETAIL to show how the fields and structures are filled.
    3. Check and change the parameters for BAPI_RE_CN_CREATE accordingly.
    Hope that helps.
    Regards, Franz

  • Error while executing planning Function

    Hi All,
    I'm getting some error while executing planning function. Below are errors. Please check and provide solution.
    Errors occurred when executing planning function RTFMPF01/RTFMPG01
    Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
    Value 10 of chara Region does not correspond to the attrib.val RM of chara Store
    Value 11 of chara Region does not correspond to the attrib.val NA of chara Store
    Thanks,
    Vamsi

    Hi,
    Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
    Looks like there is a characteristics relationship which derives the attribute store from Region.
    Check the master data for Region for attribute Store and the corresponding values.
    The values that are maintained in the master data will only be allowed to enter in the cube.
    Thanks
    pratyush

  • Macro Error while executing planning functions or saving data

    Dear All,
    I am getting following error in BEx Analyzer while executing planning function or pressing a save button.
    Note: Excel is 2007 version.
    Cannot run the macro "XXXXXX.xlsx". The macro may not be available in this workbook or all macros may be disabled.
    I changed the settings in Macro Settings (Office Button -> Excel Options -> Trust Center -> Trust Center Settings-> Macro Settings) eventhough it is showing that above message.
    selected ->
    Enalble all macros
    Trust access to VBA project object model.
    If anybody faced this issue kindly reply to this.
    Best Regards,
    SG

    Hello everybody,
    i am facing exactlythe same issue! I am currently running GUI Patch Level 14 and BI Add on Patch Level 10.
    I have also adjusted all necessary settings in Excel Options like Activate all Macros and Trust VBA Coding.
    Does anybody have another Solution.
    As mentioned before Gui Patch 13 and BI Add On Patch 10 obviously arent the solutiuon.
    Best regards
    Janos

  • How to create and execute a function whose return value is  a table

    hi folks ,
    i would like know how to create and execute a function whose return value is a table ,
    am new to pl/sql ,
    my statement for the function is
    SELECT ct.credential_code, c.expiration_date
    FROM certifications c, credential_types ct
    WHERE ct.crdnt_id = c.crdnt_id
    AND c.person_id = person_id;
    i would like to have the result of the above query as return value for the function.
    Thanks in advance ,
    Ashok.c

    hi Ps ,
    Can you please do small sample ,
    that would help me in clear understanding
    thanks in advance
    ashok.c

  • Can I execute a function module in my  Webdynpro App ?

    Hi,
    Can I execute a function module in my Webdynpro App ?  I mean, it's not a BAPI.
    Is it possible ?   which is the procedure to follow ?  (comparing to a bapi procedure).
    Thanks for your help !
    Regards from Mexico.  =)
    Diego

    Hi Diego,
    the warning icon indicates that you're using a function module that has not been externally released. If the corresponding function module has been defined by SAP, its interface might be changed in an incompatible way within one of the next releases, e.g. removing / renaming a parameter or structure field. Stability is only guaranteed for BAPIs or external released function modules.
    From the point of view of the model import it does not make any difference. If import does not work, there seems to be some other problem. Maybe the function module has not been activated in the R/3 system. Or check the log file or the import log page which will be the last page of the import wizard.
    You might want to import some other none external released function module in order to verify that model import of these kind of function module works.
    Kind regards,
    Lothar Bender

  • How to execute a function and return the result into a bind variable

    Hi,
    I am trying to calculate the sum of salaries of all persons with a particular JOB_ID using a function TOTAL_INCOME(v_job_id).
    create or replace function total_income
    +(v_job_id IN varchar2)+
    RETURN number IS
    v_total number(6);
    cursor get_sal is
    select salary from employees
    where job_id = v_job_id;
    BEGIN
    v_total := 0;
    for emp in get_sal
    loop
    v_total := v_total emp.salary;+
    end loop;
    dbms_output.put_line('Total salary of '||v_job_id||' is: '|| v_total);
    return v_total;
    END;
    Now I woud like to execute this function and assign the returned value into a bind variable test_sal
    variable test_sal number(6)
    SELECT total_income('AD_VP') into :test_sal FROM DUAL;
    dbms_output.put_line('Total Sal:'||:test_sal);
    This is returning the below errors:
    SELECT total_income('AD_VP') into :test_sal FROM DUAL
    *+
    Error at line 0
    ORA-01036: illegal variable name/number
    dbms_output.put_line('Total Sal:'||:test_sal);
    Error at line 3
    ORA-00900: invalid SQL statement
    Could someone help me what could be the problem?? Thanks for your time...

    Dear,
    If everything you will do will be done inside PL/SQL (stored procedure or stored function) then you don't have to care about bind variable.
    When using PL/SQL (static SQL) you will never encounter issues related to bind variables. PL/SQL itself takes care of your code and uses bind variables behind the scene.
    The only situation where you have to look carefully to the use of bind variables within PL/SQL is when you use Dynamic sql into stored procedures or functions.
    So, see in the light of the above comment, if you have to care about returning your function into a bind variable?
    Best regards
    Mohamed Houri

  • Re-executing a function in IP web: buffer problem

    Hello everybody,
    we have performed 2 changes to our application:
    1. for performance reasons we replaced a FOX function with an IP exit function and
    2. to limit the number of entires appearing in F4 (000's) in the web application when selecting mater data for filtering we inserted a new InfoObject for the selection with only a few (about 10) master data entries and then passed the variable values to the original infoobject
    Both changes work well but there is a nasty side effect.
    The INITIAL execution of the query (variable pop-up) and filtering in the web application works fine. The user enters data manually and executes a function performing some caluculations (was FOX, is now an IP exit function).
    After this initial execution of the function it is not possible to re-execute the function. If e.g. the user performs a few more manual changes and then tries to execute the function again nothing happens. Only be logging off and on again (i.e. a new session) the user can execute the function again.
    Cache mode for the query (in RSRT) is set to 0 (=inactive).
    It is obviously a  buffer problem (some sort of delta/plan buffer conflict) and I have had this before but I cannot recall how to solve it ... its the age!
    Grateful for any assistance
    Edited by: Martin Helmstein on Nov 10, 2010 11:07 AM
    Clarification: if the user repeats inputting data under the INITIAL filter selection state and executes the function again it works. The problem only occurs if the user changes the filters (drop down boxes in the web application), inputs data and attempts to execute the function with this new selection.

    Hi Martin,
    One easy way of solving is to include the WAD command TRANSFER_STATE at the end of all the Planning function / Sequence commands attached to the Button.
    This will refresh the WAD layout without having to reenter the variable values if any.
    The other Option is to reset all the variables associated with the execution of Planning function after every execution.
    This can be included under Web template Properties so this happens after every refresh of the layout.
    Hope this helps.
    Regards.
    Shafi.

  • Execute a function in SQL Worksheet

    How can I execute a function in SQL Worksheet.
    The function takes in two parameters of type varchar2 and returns a boolean.
    the syntax is:
    set serveroutput on
    VARIABLE x BOOLEAN;
    EXECUTE :x := check_number('78','A');
    PRINT x ;
    my error is:
    SP2-0552: Bind variable "X" not declared.
    I have also tried:
    set serveroutput on
    select check_number('78','A')
    from dual;
    my error is:
    ERROR at line 1:
    ORA-06552: PL/SQL: Statement ignored
    ORA-06553: PLS-382: expression is of wrong type
    thanks.

    You could even cut out the variable:
    SQL> CREATE OR REPLACE FUNCTION is_true
      2     ( p1 VARCHAR2
      3     , p2 VARCHAR2 )
      4     RETURN BOOLEAN
      5  AS
      6  BEGIN
      7     RETURN p1 = p2;
      8  END is_true;
      9  /
    Function created.
    SQL> exec dbms_output.put_line(sys.diutil.bool_to_int(IS_TRUE('x','y')))
    0
    PL/SQL procedure successfully completed.
    SQL> exec dbms_output.put_line(sys.diutil.bool_to_int(IS_TRUE('x','x')))
    1
    PL/SQL procedure successfully completed.

  • Can I Execute a function whose name is stored in a string variable?

    Can I execute a function whose name is stored in a string variable?
    Like
    Depending on the condition I will stroed the name of the function in a string variable. Then using that string variable i want to execute the function.
    String str=��
    iVal an int can take ne value
    Switch(iVal)
    Case 1:
    str=�test1()�;
    Case 2:
    str=�test2()�;
    I want whatever function name is in str to be executed.
    ----------------------------------------------------------------------------------

    For just executing a method or two, reflection might be easier than beanshell (or it might not). For executing entire scripts, beanshell will be preferable over reflection.
    (I assume beanshell uses reflection under the hood, but I've never bothered to peek.)

Maybe you are looking for

  • RE:Setting attributes of columns in listviews

    Hello Jack, please use the Debugger to find out if the object '<ListView.Column>' has it's memory. Look also, if the Column you specify is initialized. In most cases your application bombs if you forget the new command to some variables. Hope it help

  • Action Transport into sandbox in urgen correction SDHF???

    Hi Expert, We face a problem in the action transport into sandbox during an urgen correction, the solution manager not recognize the sandbox system. Any help please! The role of the sandbox is " evaluation system" The error is the following: An actio

  • Massive copy of users report

    Is there any standard report or someone has a Z report for Massive Copy of Users (including security roles and profiles) based on one user?

  • Javahelp and JDIC

    Hi All, I am developing help for swing application. But the default help viewer was unable to load stylesheets. But in java hekp users guide they mentioned that we can use JDIC for native browser support. Then, i think that it may solve my probelm. I

  • Basic (9.0) Unified CM Insufficient Licenses

    Dears, Can anyone help us we have issue with basic user license its showing insufficient licences if you see on the table its mention in required 353 and total is installed 253 i need to how to add extra license in ELM.... Regards. Syed..