Action Transport into sandbox in urgen correction SDHF???

Hi Expert,
We face a problem in the action transport into sandbox during an urgen correction, the solution manager not recognize the sandbox system. Any help please!
The role of the sandbox is " evaluation system"
The error is the following:
An action was terminated due to an exceptional situation.
Message no. SOCM_ACTION_LOG 090
Unable to find system Sanbox for task
/TMWFLOW/SCMA_TRORDER_IMPORT_H
/TMWFLOW/TASK_START:E:/TMWFLOW/TASKLIST:213
Exception CX_SOCM_POSTCONDITION_VIOLATED occurred (program:
CL_CHM1_INSTANCE==============CP, include:
CL_CHM1_INSTANCE==============CM001, line: 59).
Best Regard,

Hello Brizes,
You might want to look at SAP Note 1094449 - "Change Request Management: Transport copies to sandbox", for help on this problem. Also please use SAP Note 1290986 - "ChaRM - Guidance of transporting copies to other systems", as a reference.
Regards,
Paul

Similar Messages

ChaRM Action 'Transport into Sandbox System'

Hi,
How the action 'Transport into Sandbox System' works.
Wanted to know how this action works & in TMS do we need to map sandbox client.
From sand

Hi PK,
answer is Yes for the STMS and also you need to have a system defined as single type within maintenance cycle you re working in. Solman will be using your tasklist structure to understand which system is supposed to receive the import
Since a couple of stacks it became possible to actually define the role type of system that is supposed to receive the import of TR. I mean by role type the kind of system like you define in STMS when declaring a logical component
Regards
Khalil

Scheduling transports into prod

Hello,
We are running Solution Manager 7.0 SP15 and we have a requirement to import normal corrections into the production systems on Sunday morning at 4:30.
I for one do not want to wake up every Sunday to change the maintenance cycle of each system to "go-live" and then back to "development with release" in order to allow the transports to production.
There must be a way to automate/schedule this process.
Management wants to use only normal corrections for the Sunday transports.
Thank you!

Why would you want to change your Maintenance Cycle back to in development with release?
Once you finish your maintenance cycle every week you should create a new one
In order to move the transports into Q or P automatically you can either schedule a job for the report /TMWFLOW/SCMA_BTCH_SYNC_UC which runs every 10mins and thus imports all transport for a specific Project for a particular System and Client.
Another possibility is to schedule the automatic mass import of all transport in the Q/P-import queue, via STMS. This will schedule the Report TMS_BCI_START_SERVICE (jobname TMS_0000000001TMS_TP_IMPORT)
Nesimi

Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)

I have a wonderful action that was written to work in PSE 3/4/6. It won't run in PSE 7/8/9. After fooling around for a while, I think I understand why. Adobe changed the way Adjustment Layers are handled. In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box. That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
Here a sample of some of the action steps that won't work correctly:
Make adjustment layer
Using: adjustment layer
Type: levels
Set Selection
To: none
Set current layer
To: layer
Name: “Adjustment 1”
Set current layer
To: layer
Mode: luminosity
Stop
Message: “Move gray slider left”
With Continue
Set current adjustment layer
To: levels
In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?

Adding a new levels adjustment layer on top of the Midtone contrast layer
should work, just use a clipping mask to restrict the adjustments to the
areas of the levels adjustment layer below. The histogram will be different, but
actually testing the action is really the only way to know if that makes any difference.
Replacing the levels adjustment layer is another option, though it requires a few more steps.
The following assumes when the action gets to this point,
the Midtone contrast adjustment layer is the active (selected) layer.
To record this part of the action:
1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
    down to the Create new channel icon at the bottom of the channels panel)
2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
    This loads the selection of that channel.
3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
   of the channels panel.
4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
5. Go to Layer>New Adjustment Layer>Levels
    This creates a new levels adjustment layer using the selection loaded from
    the duplicated channel and opens the levels dialog.
To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
and the same is true for the red, green and blue channels.
With layer masks, elements doesn't seem to want to load them as selections in actions,
so that's the reason for the action steps above.
MTSTUNER

Probelms while replicating Data Source and transport into test system

I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.

Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

Reg. ALV output transported into Excel

Dear All,
when i transported my ALV report output to excel file , amount column is suppressed from decimal places .
i.e. in excel file , decimal values of amount column is not shown in some amounts.
Please provide some inputs
Thanks & Regards
shailesh

Hi ,
Check this [LINK|ALV List output to Excel file; for ALV output transported into Excel.
hope it will help you .
Regards,
Saravana.S

Transporting into a new BW system from a shared dev system

We are currently in the process of setting up a new BW system in the same landscape as our existing one where both boxes will share the same dev system. Our existing one is used by many different applications and has tonnes of shared objects on it. Our new box will only be used for SEM-BCS and thus does not need everything else that the other box contains. Since many objects are dependant on others (attributes and such) I am finding it hard to get transports into the new system. There always seems to be something missing even when I try to just move a single object. I also seem to be having troubles with InfoObject Catalogs where they cannot be moved if the InfoObjects are not there and the InfoObjects a cannot be moved with the Catalogs not there. This is all starting to give me a serious headache.
Has anyone delt with transporting to separate systems from a common development system? What is the best approach to this to ensure we only move what we need to the new system?

The transporting is the same, however there are a lot of dependant objects that also need to be brought into our system. I'm looking for a way to minimize what I need to transport into our new system.
Collecting automatically doesn;t seem to be working for me since it does not collect everything I need and when I add that missing object I then seem to be missing another list of objects. It seems to be a never ending cycle.

Moving a transport into a maintenance cycle

Hello All
I am doing some testing moving transports out of a maintenance cycle.
It appears that I can move a transport out of a maintenance cycle if it modifiable or released. What I am not able to do is move a transport into a maintenance cycle. It appears this might be a security (Role) thingy
The message I get is:
You cannot assign any requests to project
Message no. CTSPRJ043
Diagnosis
You want to create a request in project SB1_P00013, or assign an existing request to this project. However, you are not currently allowed to use this function for this project.
Anyone have any ideas
Regards
Don Newton

Good Day Srinivasa.
I am really trying to do 2 things.
1) In the current maintenance cycle there is work that was started (transport created through Change Request Management). It was requested that the work be completed in a future Maintenance cycle.
I want to (1) remove the transport from the current maintenance cycle and then (2) add the transport to a future (open) maintenance cycle.
2) There are transports that have been created outside Change Request Management and I want to move these into the current maintenance cycle.
Currently I am able to remove the transport from a maintenance cycle by using SE10, utilities, reorganize, u201Cdelete project assignmentu201D. What does not work is u201CAssign to a Projectu201D. When I try this I get the message u201Cyou can not assign any request to project SB1_P00015u201D.
I hope this gives you a better understanding of what I am trying to do.
As far as the SAP Tutor file, you could try to send it to me via the e-mail address that is on my profile.
Thanks again Srinivasa.
Regards
Don Newton

Copy QA SPAU Transports into Development

Hello experts,
Our development team has created SPAU transport request in QA system and it has been released from QA. Team told me to copy the transport into new request and put STMS buffer to Development system.
Since dev and QA in same transport directory I have added into development STMS_IMPORT --> Add to buffer manullly then I can the transport request in development queue .
But they dont want this way , they asking me to create copy of the QA transport and add into development STMS buffer queue.As per I know i can create SE09 workbench request and add object .My QA,Dev systems are very critical , if i create manual request as copy of original request is objects will overwrite in QA? And after that how to add this request into development?
Iam not sure how it works, but it would be really great if you can answer this..
- Jim

Hello ABAP Gurus,
Do you have any thoughts??
- Jim

Any reason why transporting into Production is slower?

Hello Experts,
I have QAS which is less powerful than PRD. Both have no users except me now.
I have been transporting to PRD but always, same request gets transported into PRD substantially slower than into QAS.
Is there any cause for concern? Am not sure what could be the cause. Hope to get some advice.
Thanks in advance.
Regards,
Adette Rosenthal

Hello Experts,
Thanks for your helpful contribution.
Points awarded.
Object being transported : workbooks and queries.
In fact, both QAS & PRD systems have similar dataset.
And PRD is faster machine.
I also compared the time it took to transport 1 single workbook and query in both systems. As always, PRD takes about at least 2 times longer.
I think STMS quite ok. But will ask Basis to check if the speed of import can be improved.
Regards,
Adette Rosenthal

Will you still be able to install 3rd party actions/presets into PS CC?

Will you still be able to install 3rd party actions/presets into PS CC? Will the installation be the same method, or will there be something different we will have to do?

CC is a marketing/ licensing model, not a technical change. Yes, actions, presets and al lthe otehr stuff will be installable just like in the past locally, but these options will be expanded by the new online sharing and configuration sync features.
Mylenium

UNABLE TO IMPORT TRANSPORT INTO QA system.

I am trying to load Transport Request (Customizing) from DEV to QAS.
The Request has been released in DEV system using SE10, But the released request is not showing up in QAS queue.
I have performed all 3 test (TP, Transport Directory etc) , and it does not show any error (All Success).
Central Transport Directory is accessible from both System.
When both DEV , QAS are part of same Transport Route, its not allowing me to import, its not even showing up in the import queue of QAS and even If I try to add the request manually to QAS queue then still it's empty.
Then I went into Transport Route on Domain controller and make it as Single Standard System and then went to QAS import queue and added that request and it shows up then.
How can I correct this issue, what part am I missing.
I already searched the forum, but did not find a solution to this. Need to resolve this soon.

When both DEV , QAS are part of same Transport Route, its not allowing me to import, its not even showing up in the import queue of QAS and even If I try to add the request manually to QAS queue then still it's empty.
It's depend on the way you configure your transport management system. If you define a consolidation route between DEV-QA, it will come on the QA queue when you release any request from DEV. While generating any request in Dev system what you found as target system SID ? You have to check these things.
Regards,
Subhash

Help in collecting objects for transport into Q

Hi All,
We have our Q environment ready and need to transport the data flows into Q. I know that we have to replicate the datasources in Q before doing any transports. I have a flow like below:
R/3 -> ODS -> Cube. I have generated an export datasource on the ODS and created a datamrt infopackage to load from ODS to Cube. What is the correct way to collect them in transports. I read(in some of the earlier posts) that we need to transport the export datasource before transporting the Cube.
Please suggest!!!
Thanks,
RPK.

Hi,
If you are using Version 7 , no need to worry about it. We can combine both ODS and CUBE with Dataflow before and after in a transport requet.
But If I remember correctly, I had a datasource unavailability problem with both ODS and CUBE with Dataflow before and after in a transport requet in older versions.
So, in older versions, Take ODS with DFBefore in a request , trnasport and import it first, Then Replicate teh data sources from teh context menu of self source system. And then take Cube in another request with DFB and DFAfter .Import it later.
With rgds,
Anil Kumar Sharma .P

LC4: how start Acrobat action wizard script or trigger preflight correction?

Hi!
I need to work with layers (OCG) in a single site PDF.
seperate the different element types into different layers (done by preflight correction script)
hide the text layer
export the pdf without the hidden text-layer as img
import the new img as background layer.
save pdf
I was able to do all steps in 4 different action wizard scripts in Acrobat XI. How can I access them in a LiveCycle process?
If this is not possible, how can I access preflight corrections into a LiveCycle process to achieve the same?
Thanks a lot!
Andreas

Hi!
I need to work with layers (OCG) in a single site PDF.
seperate the different element types into different layers (done by preflight correction script)
hide the text layer
export the pdf without the hidden text-layer as img
import the new img as background layer.
save pdf
I was able to do all steps in 4 different action wizard scripts in Acrobat XI. How can I access them in a LiveCycle process?
If this is not possible, how can I access preflight corrections into a LiveCycle process to achieve the same?
Thanks a lot!
Andreas

Weird: Backup file works fine from the network but not when moved into sandbox environment

We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've
tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move
the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
Any thoughts? Has anyone seen this before? Any idea? TIA,
Raphael
rferreira

Original server that generated the .bak file:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64)
Jun 11 2012 16:41:53
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server where I CAN restore the .bak file from the network location (not inside the sandbox):
Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server inside the sandbox where I get the error when attempting to restore the backup:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64) Jun 11 2012 16:41:53 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
rferreira

Action Transport into sandbox in urgen correction SDHF???

Similar Messages

Maybe you are looking for