TCP_DATAREADY event slows down TCP data
I'm working on some Labwindows/CVI code that communicates with an embedded device using the TCP libarary.
The CVI code is a client that sends requests for data to the embedded server.
The request / response happens in a timer callback.
The code does not use the TCP library callback TCP_DATAREADY event to collect the data. This event has no code in it.
Rather the code running in the timer callback calls ClientTCPWrite(...) to send the request to the server.
Then it waits in a loop and uses calls to ClientTCPRead(...) to collect the response data as quickly as possible.
Most of the time this works well. The TCP_DATAREADY never gets called.
However sometimes, if I do something with the user interface, like drag a window around or something it gets into a situation where it starts
calling the TCP_DATAREADY very rapidly. This has the effect of slowing things waaaay down. No data is read in the TCP_DATAREADY callback so it eventually gets all the data in the loop in the timer callback.
Is there any way to shut off calls to TCP_DATAREADY?
Or is there a better way to set this up?
Thanks,
Kirk
The CPU usage goes up significantly when it gets in this "state".
It's not really while you're dragging the window around, rather it seems like causes it to start a vicious cycle where it makes very many calls to the TCP_DATAREADY event.
I put a counter in the TCP_DATAREADY callback. When I start the code that requests data from the server and check the counter it hardly ever counts up. Then if I move the window or click a button that starts some data logging boom! the counter starts counting up like crazy. It's as if my code that is polling ClientTCPRead(...) gets interrupted long enough to allow a TCP_DATAREADY event and from then on it always calls TCP_DATAREADY as fast as it can??
I put a SetCtrlVal(..) in the TCP_DATAREADY event to display the counter and when it gets into the "bad" state it REALLY! slows down.
Not surprising I guess because the user interface update takes a long time.
The reason I'm polling ClientTCPRead(...) is that I want to respond as quickly as possibly to the incomming TCP data. If I knew how often TCP_DATAREADY events are generated I may be able to "centralize" my data reading in the TCP_DATAREADY event.
I tried putting ProcessSystemEvents() calls in various places. Didn't seem to change the symptoms.
Any more thoughts?
Kirk
Similar Messages
-
Sudden slow down in data transfer
I'm reading data from the hard disk on a Target PXI System (8106 RT) and sending it via Ethernet to a Host PC and writing it to its hard disk. I read a chuck of data from the Target, send it using TCP Write function. The Host uses the TCP Read function get the data and write it to its hard disk. Data is being transfer over a Gbit Ethernet. A total of 9 files ranging in size from 700 MB - 2 GB are being transferred. The process moves along at an adequate speed until it suddenly slows down to slower than a snail's pace in the middle of a file.
By using probes (see enclosures) I've been able to determine it take approximately 17 seconds between when the data is read on the PXI to when it is written on the Host. However, an iteration of the loop on the Target has increased to over 3 minutes. The CPU usage on the Target and Host are minimal, less than 1%. Memory usage on the Host is also small. Any suggestions on how to diagnose what has caused this sudden slow down?
Attachments:
Slide1.PNG 104 KB
Slide2.PNG 124 KB
Slide3.PNG 39 KBI would recommend using smaller chunk sizes for your data transfers. I would recommend something inthe 10K to 50K range. I have done quite a bit of profiling for sending large amounts of data and I have found that it is better to send lots of smaller chunks rather than fewer large chunks. Also make sure that you are not automatically building up large buffers in your application if you are using shift registers. If you are reading from a file read the file in chunks and send the chuncks. Don't read the whole file in in one read. One experiment I ran resulted in a single read of a large file (2 MB or so) took something like 10 minutes to read it in one read. However it only took a couple of 100 ms to read the whole thing in 10K chunks. Same applies to wrinting very large chunks using the TCP write. You can easily get a timeout if you write 1 MB as a single write because the receiver has not consumed all of the data within the timeout period. However, multiple small writes will reset the timeout for each chunk written.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot -
Thousands of defined events slowing down CE10
Hi, we're still running CE10 (version 10.0.5.1498 to be precise) and I have about 2500 defined events. Over time I noticed that the more events I defined the slower it was for the list of events to appear. I'm now up to 3 minutes or more!
Anything I can tune or set to speed this up? It's murder trying to schedule a report with an event dependency.Some time back BO personal recommended us that we should have one Event server per CMS.
If you have two CMS, make sure you have one event server per CMS.
If you distribute the eventserver as a stand alone it might slow down communicating with the CMS. -
For people with an unlimited data plan...does it slow down for you after 2GB?
Ive had my unlimited data plan since i joined AT&T back in 2008 when i bought the iPhone 3G...ive been able to keep it for my current iPhone 4 and now ill be upgrading to iPhone 5 and was wondering if anyone else with an unlimited data plans suffers slowing down of data after 2GB? it mite b more than 2GB but it def does slow down...will this continue to happen or it is it just me?
AT&T's policy explained - http://www.att.com/esupport/datausage.jsp?source=IZDUel1160000000U
Click the "what you need to know". If you exceed 3GB you will be throttled, and you should receive a text message about it the first time you go over. -
I have the original AIR recently it has really slowed down. Every function usually gets the pinwheel. It is up to date and has 10g of free disk space. Any suggestions as to the cause?
Often a failed disk or power supply. See:
https://encrypted.google.com/search?q=%22time+capsule%22+%22orange+light%22&as_q dr=all&newwindow=1&num=100 -
[Solved]Computer slow down and freeze during data transfer syncing
Hello,
Everytime I make a data transfer, my computer slow down, and sometimes freeze during a few seconds, work for a fraction of seconds and freeze again. I don"t understand why.
As an example, here is a bench of files i transfered during a syncing with Grsync
It took about 12h to sync 64Gb.
I've read a lot of topics talking about this problem but nothing works. I tried to switch off the SWAP and setting the vm.dirty_ratio and vm.background_dirty_ratio but nothing works.
I'm making the trasfer between two Western Digital USB 2.0 external hard drive in NTFS.
Does anyone know how to fix this?
Thanks in advance
Last edited by Neldar (2015-03-04 15:54:29)It seems it was beacause one of my external hard drive was about to die. I performed the same operation with 2 Western Digital external hard drive 1To USB3 and it works perfectly.
-
Data acquisistion slowing down
Hi,
I am using two different while loops to collect data from a capacitance bridge and a temperature readout. I am using PCIe-GPIB for the capacitance bridge and a PCI card for the temperature readout. Then, i am using local variables to transfer the data to a third while loop. Here , i merge the signals and then write the data to a measurement file. I need one data point every second. When I run the vi, initially i get the speed that i want. But, with time, the data acquisition gets slower for both the devices. The write to measurement file data indicates such. I have attached a snapshot of the vi i am running. Need your help with this ...
Thanks
Sakib
Attachments:
Data Acquisition slowing down with time.PNG 46 KBConstantly opening and closing a file makes things SLOW. So you will want to get away from using that Express VI. Learn the File IO palette and also the String palette. Between those two, you should have everything you need to log your data. Be sure to create/open your file before your loop and close it after the loop. You can then write as much as you want inside of the loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Why does my data logging program slow down after a while?
A data logging program created with Labview 5.1. Slows down after a few weeks and creates files in the Temp. directory.Computer is Siemens Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also using Solartron Dig. probes and Fieldpoint units.
Any chance that you are using Win 95/88/ME? Those OS's have well documented
memory leaks which will consume all your available memory if an application
is run long enough. Also there are some issues of memory management within
LabView in the allocation of memory.
The solution to the first is to switch to WinNT/2K. The second will be much
more difficult.
On Thu, 22 Feb 2001 03:19:12 -0800 (PST), Freek wrote:
>A data logging program created with Labview 5.1. Slows down after a
>few weeks and creates files in the Temp. directory.Computer is Siemens
>Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also
>using Solartron Dig. probes and Fieldpoint units.
===========================================================================
SolidW
orks Research Partner National Instruments Alliance Member
Christopher Dubea Phone: (504) 847-2280
Vice President of Engineering Fax: (504) 847-2282
Moving Parts L.L.C. email: [email protected]
P. O. Box 6117 URL: http://www.movingpart.com
Slidell, LA 70469-6117 -
Does 'find your iPhone' use a lot of internet? My mobile data is running out ridiculously fast and I need it to slow down! Anyone has suggestions / info?
You should shut down all the apps running in the background and then reset your phone. Double tap the home button to open the multitasking drawer (iOS 6.X) or the multitasking screen (iOS 7.X) if you are on iOS 6.X press and hold one of the app icons and wait for the icon's to start to jiggle, just like when you want to delete an app. Tap the little x that appears in the upper corner of the icons. Repeat until all the icons are gone.
If you are on iOS 7.X once the multitasking screen is open swipe up on all the app images until they are all closed. Tap on the home screen to close.
Then press and hold both the Home and Sleep buttons at the same time and wait for the Apple logo to appear then release both buttons. The phone will restart itself.
If this doesn't help try doing a Reset All Settings reset, you will not lose any data or content or media. But you will have to reset any setting you turned on or off in Settings. This will reset all settings back to factory default. Settings => General => Reset => Reset All Settings. -
MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation
Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Timer Class not accurate and slows down my animation!?
Does anyknow how why my timer object is not accurate and why it slows down my animation that is also present on my GUI at the same time?
I have a timer in the form of 0.00 the left of the decimal point should represent a second but it doesnt, run my code and see for yourselves. below is my code if anyone can fix these 2 problems i will be very thankfull:
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.Shape;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
import java.sql.*;
import java.text.*;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel, coJLabel, shJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;
public JComboBox colourJComboBox, sizeJComboBox, shapeJComboBox, speedJComboBox;
private static Connection dbcon;
int temp=0;
private String[] col = { "Red", "Blue", "Green","Yellow","Orange","Black"};
private String[] shapeA = { "Normal Rectangle", "Normal Circle", "Normal Oval","BIG Rectangle", "BIG Circle","BIG Oval","small rectangle","small circle", "small oval"};
private String[] speed = { "Fast", "Normal", "Slow"};
public int checking;
static int flag, flagshape, flagspeed;
// creates and sets up a number of varibles to be used by the class
public long timeLimit = 0;
DecimalFormat timeDec = new DecimalFormat (":00");
public int age;
public String name, shapeChoice="Normal Rectangle(Never selected anything)", colourChoice="Black(Never selected anything)";
private Timer TimeNow;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
Random seed;
Shape shape;
Shape[] shapes = {new Rectangle2D.Double(50, 30, 75, 25),new Ellipse2D.Double(175, 125, 50, 50),new Ellipse2D.Double(90, 100, 75, 35),new Rectangle2D.Double(50, 30, 175, 125),new Ellipse2D.Double(175, 125, 125, 125),new Ellipse2D.Double(90, 100, 175, 135),new Rectangle2D.Double(50, 30, 55, 15),new Ellipse2D.Double(175, 125, 20,20),new Ellipse2D.Double(90, 100, 55, 15)};
//50, 30, 75, 25 change starting point here****************************************
public RT() // constructor method
seed = new Random();
shape = shapes[0];
//sets up the Timer
TimeNow = new Timer((1), new TimerListener());//++++++++++++++++++++++++++timer -17
createUserInterface(); // method that creates the user interface
private void createUserInterface()
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
dbcon = DriverManager.getConnection("jdbc:odbc:CMT3991", "", ""); // Access/ODBC
//connection ash used to connect to the user table in access
} catch(Exception eee)
eee.printStackTrace(); //exception if error occurs during the driver connection
System.out.println("* UserDA CONNECTED *");
}).start();
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME - PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
// loginJButton.setVisible(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
// showJButton.setVisible(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "CHOOSE A NUMBER OF OPTIONS AND GET READY:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
coJLabel= new JLabel();
coJLabel.setBounds( 70, 40, 530, 35 );
coJLabel.setText("Choose a colour:");
helpJPanel.add( coJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
colourJComboBox = new JComboBox( col );
colourJComboBox.setBounds( 70, 70, 135, 21 );
colourJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( colourJComboBox );
colourJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
colourChoice="Black";
int x = colourJComboBox.getSelectedIndex();
if( x == 0)
flag = 1;
colourChoice="Red";
else if(x == 1)
flag = 2;
colourChoice="Blue";
else if(x == 2)
flag = 3;
colourChoice="Green";
else if(x == 3)
flag = 4;
colourChoice="Yellow";
else if(x == 4)
flag = 5;
colourChoice="Orange";
else if(x == 5)
flag = 6;
colourChoice="Black";
shJLabel= new JLabel();
shJLabel.setBounds( 340, 40, 530, 35 );
shJLabel.setText("Choose a shape and size:");
helpJPanel.add( shJLabel);
shapeJComboBox = new JComboBox( shapeA );
shapeJComboBox.setBounds( 340, 70, 135, 21 );
shapeJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( shapeJComboBox );
shapeJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xshape = shapeJComboBox.getSelectedIndex();
//shapeChoice="Normal Rectangle";
if( xshape == 0)
{ flagshape = 1;
shapeChoice="Normal Rectangle";
else if(xshape == 1)
{ flagshape = 2;
shapeChoice="Normal Circle";
else if(xshape == 2)//**********here
{ flagshape = 3;
shapeChoice="Normal Oval";
else if(xshape == 3)
{ flagshape = 4;
shapeChoice="BIG Rectangle";
else if(xshape == 4)
{ flagshape = 5;
shapeChoice="BIG Circle";
else if(xshape == 5)
{ flagshape = 6;
shapeChoice="BIG Oval";
else if(xshape == 6)
flagshape = 7;
shapeChoice="small rectangle";
else if(xshape == 7)
{ flagshape = 8;
shapeChoice="small circle";
else if(xshape == 8)
{ flagshape = 9;
shapeChoice="small oval";
/* speedJComboBox = new JComboBox( speed );
speedJComboBox.setBounds( 10, 150, 135, 21 );
speedJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( speedJComboBox );
speedJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xspeed = speedJComboBox.getSelectedIndex();
if( xspeed == 0)
flagspeed = 1;
else if(xspeed == 1)
flagspeed = 2;
else
flagspeed = 3;
System.out.println(flagspeed);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
// startTestJButton.setVisible(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
} // end method main
* action listener for TimeNow Timer
private class TimerListener implements ActionListener
public void actionPerformed(ActionEvent event)
timeLimit ++;
if (timeLimit==100)
temp++;
timeLimit=0;
timerJTextField.setText(String.valueOf(temp +""+timeDec.format(timeLimit)));
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are.");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
// System.out.println(""+ seed.nextInt(shapes.length));
//shape = shapes[seed.nextInt(shapes.length)];//****************************
if (flagshape==1)
shape = shapes[0];// changed colour here***************************
else if (flagshape==2)
shape = shapes[1];// changed colour here***************************
else if (flagshape==3)
shape = shapes[2];// changed colour here***************************
else if (flagshape==4)
shape = shapes[3];// changed colour here***************************
else if (flagshape==5)
shape = shapes[4];// changed colour here***************************
else if (flagshape==6)
shape = shapes[5];// changed colour here***************************
else if (flagshape==7)
shape = shapes[6];// changed colour here***************************
else if (flagshape==8)
shape = shapes[7];// changed colour here***************************
else if (flagshape==9)
shape = shapes[8];// changed colour here***************************
// shape = shapes[8];
System.out.println(shape.toString());
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
infoJTextArea.setText("");
TimeNow.start();
* called by animation panel after shape is clicked
public void stop()
TimeNow.stop();
movingObject();
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
TimeNow.stop();
//timeLimit;
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
System.out.println("shape used: "+shapeChoice);
String mouse = infoJTextArea.getText();
String tick = timerJTextField.getText();
timeResultsJTextField.setText(tick);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter("Backup_of_"+name+"s_results.txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("THIS IS A BACKUP");
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The Shape and size was: "+shapeChoice);
printstream.println("It's colour was: "+colourChoice);
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(temp<5.00)
ratingJTextField.setText("Thierry Henry");
else if(timeLimit<=10)
ratingJTextField.setText("Average");
else if(timeLimit<=15)
ratingJTextField.setText("You gotta be fat or something");
else if(timeLimit<=20)
ratingJTextField.setText("See a doctor");
else if(timeLimit>20)
ratingJTextField.setText("DO YOU KNOW WHAT YOU DOING!?");
String rate=ratingJTextField.getText();
try
Statement st = dbcon.createStatement();
String cmd = "INSERT INTO users (Name, Age, Time_Taken, Rating, Mouse_Movement,Shape_and_Size, Shape_Colour) VALUES ('" + name + "' , " + age + " , '" + tick + "' , '" + rate+"','"+ mouse+"','"+ shapeChoice+"','"+ colourChoice+"');";
//creates a SQL statement and executes it
st.executeUpdate(cmd);
st.close();//close the statement
} catch (Exception eDA)
eDA.printStackTrace();
private void showData()
// pretend this takes awhile -> 3 seconds (count)
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
}).start();
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
timer = new Timer(-20, this);
host = rt;
/* if (rt.flagspeed==1)
timer = new Timer(-20, this);
else if (rt.flagspeed==2)
timer = new Timer(20, this);
else if (rt.flagspeed==3)
timer = new Timer(100, this);
//change speed here******************************
x = 0;//0
y = 0;//0
dx =2;//2
dy = 3;//3
//setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
if (RT.flag==1)
{g2.setPaint(Color.red);// changed colour here***************************
else if (RT.flag==2)
{g2.setPaint(Color.blue);// changed colour here***************************
else if (RT.flag==3)
{g2.setPaint(Color.green);// changed colour here***************************
else if (RT.flag==4)
{g2.setPaint(Color.yellow);// changed colour here***************************
else if (RT.flag==5)
{g2.setPaint(Color.orange);// changed colour here***************************
else if (RT.flag==6)
{g2.setPaint(Color.black);// changed colour here***************************
xfoI'm (being lazy and) using the older RT app posted on your last thread. I removed the
TimeNow timer from the RT class and used System.currentTimeMillis (as you requested) to
determine the elapsed time during the animation (see "startTest", "stop" and
"movingObject" methods). Also changed the DecimalFormat to NumberFormat and set the
"maximumFractionDigits" to "2" so it will truncate the fraction to two digits (more simple
than before). Made arrangements for the ShapeMovingPanel class to update the
"timerJTextField" during the animation (RT.updateTime method).
The MouseMotionListener is causing the animation to appear jerky and uneven. The
"mouseMoved" method is very busy while the mouse is moving. You might consider recording
the "mousePressed" events instead of the "mouseMoved" events, ie, the events where the user
is attempting to click inside the moving shape. It would allow the app to be more
responsive and might eliminate the uneven motion of the animating shape.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;;
// creates and sets up a number of varibles to be used by the class
private long startTime;
private long endTime;
public int timeLimit = 0;
public int age;
public String name;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
NumberFormat timeDec;
Random seed;
Shape shape;
Shape[] shapes = {
new Rectangle2D.Double(50, 30, 75, 25),
new Ellipse2D.Double(175, 125, 50, 50),
new Ellipse2D.Double(90, 100, 75, 35)
public RT()
timeDec = NumberFormat.getInstance();
timeDec.setMaximumFractionDigits(2);
seed = new Random();
shape = shapes[0];
createUserInterface();
private void createUserInterface()
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME -PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "HELP DETAILS:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
// this is causing the animation to appear uneven
// you can try the app with and without this to see
// testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( EXIT_ON_CLOSE );
} // end method main
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
shape = shapes[seed.nextInt(shapes.length)];
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
startTime = System.currentTimeMillis();
infoJTextArea.setText("");
* called by animation panel after shape is clicked
public void stop()
endTime = System.currentTimeMillis();
movingObject();
* called by timer actionPerformed in ShapeMovingPanel
public void updateTime()
long timeNow = System.currentTimeMillis();
double elapsed = (timeNow - startTime)/1000.0;
timerJTextField.setText(timeDec.format(elapsed));
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
double elapsedTime = (endTime - startTime)/1000.0;
timeLimit = (int)elapsedTime;
timeResultsJTextField.setText(timeDec.format(elapsedTime)+" seconds");
String mouse = infoJTextArea.getText();
String tick = timeDec.format(elapsedTime);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter(name+".txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(timeLimit<5)
ratingJTextField.setText("Thierry Henry");
if(timeLimit>5)
ratingJTextField.setText("Average");
if(timeLimit>10)
ratingJTextField.setText("You gotta be fat or something");
if(timeLimit>20)
ratingJTextField.setText("See a doctor");
String rate=ratingJTextField.getText();
private void showData()
// String results = "";
// infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
host = rt;
timer = new Timer(25, this);
x = 0;
y = 0;
dx = 2;
dy = 3;
setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
// update RT.timerJTextField
host.updateTime();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
g2.setPaint(Color.red);
xformed = at.createTransformedShape(shape);
g2.draw(xformed);
public void start()
if(!timer.isRunning())
timer.start();
public void setShape(Shape s)
shape = s;
Rectangle r = shape.getBounds();
x = r.x;
y = r.y;
repaint();
private class ShapeTender extends MouseAdapter
public void mousePressed(MouseEvent e)
if(xformed.contains(e.getPoint()))
timer.stop();
host.stop();
} -
My 27" iMac, late 2009, Mountain Lion has 164 GB free space of 500 GB total, and has slowed down noticeably the past month. There are three additional HD's connected, could that be part of the problem? Photoshop operations are the most affected, I'd say, PS6 is installed. PS Bridge also. Thanks very much.
5/19/13 9:54:44.701 AM sandboxd[498]: ([497]) mdworker(497) deny mach-lookup com.apple.ls.boxd
5/19/13 9:54:45.000 AM kernel[0]: Sandbox: sandboxd(498) deny mach-lookup com.apple.coresymbolicationd
5/19/13 9:56:13.947 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 9:58:46.415 AM mdworker[504]: Unable to talk to lsboxd
5/19/13 9:58:46.463 AM sandboxd[505]: ([504]) mdworker(504) deny mach-lookup com.apple.ls.boxd
5/19/13 9:58:46.000 AM kernel[0]: Sandbox: sandboxd(505) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:00:11.106 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:00:41.141 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x16-10.0.1.7:0!
5/19/13 10:00:49.814 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:05:53.943 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:06:22.935 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x18-10.0.1.7:0!
5/19/13 10:06:44.939 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:06:47.184 AM mdworker[516]: Unable to talk to lsboxd
5/19/13 10:06:47.238 AM sandboxd[518]: ([516]) mdworker(516) deny mach-lookup com.apple.ls.boxd
5/19/13 10:06:47.000 AM kernel[0]: Sandbox: sandboxd(518) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:07:14.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=521[GoogleSoftwareUp] clearing CS_VALID
5/19/13 10:08:35.363 AM com.apple.backupd[526]: Starting automatic backup
5/19/13 10:08:35.373 AM com.apple.backupd[526]: Attempting to mount network destination URL: afp://johnp;[email protected]/Data
5/19/13 10:08:35.519 AM com.apple.kextd[14]: Can't create kext cache under / - owner not root.
5/19/13 10:08:35.934 AM com.apple.kextd[14]: Can't create kext cache under / - owner not root.
5/19/13 10:08:41.000 AM kernel[0]: AppleSRP started.
5/19/13 10:08:49.366 AM com.apple.backupd[526]: Mounted network destination at mount point: /Volumes/Data using URL: afp://johnp;[email protected]/Data
5/19/13 10:08:49.000 AM kernel[0]: ASP_TCP asp_tcp_usr_control: invalid kernelUseCount 0
5/19/13 10:08:49.000 AM kernel[0]: AFP_VFS afpfs_mount: /Volumes/Data, pid 528
5/19/13 10:08:49.000 AM kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff814afa9008 /Volumes/Data (error = 0, retval = 0)
5/19/13 10:09:12.887 AM mds[34]: (Error) Volume: Root store set to FSOnly with matching create! (loaded:1)
5/19/13 10:09:13.560 AM com.apple.backupd[526]: Disk image /Volumes/Data/Big iMac (7).sparsebundle mounted at: /Volumes/Time Machine Backups
5/19/13 10:09:13.672 AM com.apple.backupd[526]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
5/19/13 10:09:14.000 AM kernel[0]: AppleBCM5701Ethernet: 0 1 BCM5701Enet::replaceOrCopyPacket worked after N tries
5/19/13 10:09:29.396 AM com.apple.backupd[526]: Using file event preflight for 27iMac
5/19/13 10:09:34.515 AM com.apple.backupd[526]: Will copy (268.1 MB) from 27iMac
5/19/13 10:09:34.531 AM com.apple.backupd[526]: Using file event preflight for LaCie 1 TB
5/19/13 10:09:34.701 AM com.apple.backupd[526]: Will copy (43 KB) from LaCie 1 TB
5/19/13 10:09:34.720 AM com.apple.backupd[526]: Found 1108 files (268.1 MB) needing backup
5/19/13 10:09:34.729 AM com.apple.backupd[526]: 2.87 GB required (including padding), 1.53 TB available
5/19/13 10:10:48.149 AM com.apple.SecurityServer[25]: Session 100013 created
5/19/13 10:10:49.130 AM com.apple.SecurityServer[25]: Session 100014 created
5/19/13 10:11:06.000 AM kernel[0]: disk0s2: I/O error.
5/19/13 10:11:22.000 AM kernel[0]: disk0s2: I/O error.
5/19/13 10:11:35.000 AM kernel[0]: disk0s2: I/O error.
5/19/13 10:11:35.992 AM com.apple.backupd[526]: Error: (-36) SrcErr:YES Copying /Users/micasa/Desktop/Adobe Photo Downloader/20130511/_MG_7646.CR2 to (null)
5/19/13 10:11:36.268 AM mdworker[585]: Unable to talk to lsboxd
5/19/13 10:11:36.319 AM sandboxd[586]: ([585]) mdworker(585) deny mach-lookup com.apple.ls.boxd
5/19/13 10:11:36.000 AM kernel[0]: Sandbox: sandboxd(586) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:13:36.103 AM com.apple.backupd[526]: Copied 8404 files (1.36 GB) from volume 27iMac.
5/19/13 10:13:44.301 AM com.apple.backupd[526]: Copied 8599 files (1.36 GB) from volume LaCie 1 TB.
5/19/13 10:13:44.432 AM com.apple.backupd[526]: Using file event preflight for 27iMac
5/19/13 10:13:44.437 AM com.apple.backupd[526]: Will copy (1.2 MB) from 27iMac
5/19/13 10:13:44.439 AM com.apple.backupd[526]: Found 27 files (1.2 MB) needing backup
5/19/13 10:13:44.440 AM com.apple.backupd[526]: 2.55 GB required (including padding), 1.53 TB available
5/19/13 10:13:56.667 AM com.apple.backupd[526]: Copied 722 files (1.2 MB) from volume 27iMac.
5/19/13 10:14:00.312 AM com.apple.backupd[526]: Copied 729 files (1.2 MB) from volume LaCie 1 TB.
5/19/13 10:14:01.475 AM com.apple.backupd[526]: Created new backup: 2013-05-19-101400
5/19/13 10:14:02.067 AM com.apple.backupd[526]: Starting post-backup thinning
5/19/13 10:14:23.198 AM com.apple.backupd[526]: Deleted /Volumes/Time Machine Backups/Backups.backupdb/Big iMac (7)/2013-04-19-082302 (238.3 MB)
5/19/13 10:14:32.787 AM com.apple.backupd[526]: Deleted /Volumes/Time Machine Backups/Backups.backupdb/Big iMac (7)/2013-04-18-093806 (29.2 MB)
5/19/13 10:14:42.979 AM com.apple.backupd[526]: Deleted /Volumes/Time Machine Backups/Backups.backupdb/Big iMac (7)/2013-04-17-140654 (47.5 MB)
5/19/13 10:14:42.979 AM com.apple.backupd[526]: Post-back up thinning complete: 3 expired backups removed
5/19/13 10:14:43.092 AM com.apple.backupd[526]: Backup completed successfully.
5/19/13 10:14:48.435 AM com.apple.backupd[526]: Ejected Time Machine disk image: /Volumes/Data/Big iMac (7).sparsebundle
5/19/13 10:14:49.000 AM kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Data, flags 0, pid 620
5/19/13 10:14:49.351 AM com.apple.backupd[526]: Ejected Time Machine network volume.
5/19/13 10:14:49.352 AM com.apple.backupd[526]: Running automatic backup verification.
5/19/13 10:14:49.352 AM com.apple.backupd[526]: Attempting to mount network destination URL: afp://johnp;[email protected]/Data
5/19/13 10:14:49.000 AM kernel[0]: AFP_VFS afpfs_unmount : We are the last mnt/sbmnt using volume /Volumes/Data 0xffffff814afa9008
5/19/13 10:14:49.000 AM kernel[0]: AFP_VFS afpfs_unmount : We are the last volume using socket /Volumes/Data 0xffffff814afa9008
5/19/13 10:14:49.000 AM kernel[0]: AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed
5/19/13 10:14:49.844 AM com.apple.backupd[526]: Mounted network destination at mount point: /Volumes/Data using URL: afp://johnp;[email protected]/Data
5/19/13 10:14:50.000 AM kernel[0]: ASP_TCP asp_tcp_usr_control: invalid kernelUseCount 0
5/19/13 10:14:50.000 AM kernel[0]: AFP_VFS afpfs_mount: /Volumes/Data, pid 622
5/19/13 10:14:50.000 AM kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff814b022008 /Volumes/Data (error = 0, retval = 0)
5/19/13 10:14:53.072 AM com.apple.backupd[526]: Verifying backup disk image.
5/19/13 10:15:11.938 AM mdworker[641]: Unable to talk to lsboxd
5/19/13 10:15:12.000 AM kernel[0]: Sandbox: sandboxd(644) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:15:12.924 AM sandboxd[644]: ([641]) mdworker(641) deny mach-lookup com.apple.ls.boxd
5/19/13 10:15:33.018 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:16:03.229 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x1a-10.0.1.7:0!
5/19/13 10:16:55.143 AM WindowServer[115]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
5/19/13 10:16:55.242 AM loginwindow[38]: find_shared_window: WID -1
5/19/13 10:16:55.242 AM loginwindow[38]: CGSGetWindowTags: Invalid window 0xffffffff
5/19/13 10:16:55.242 AM loginwindow[38]: find_shared_window: WID -1
5/19/13 10:16:55.242 AM loginwindow[38]: CGSSetWindowTags: Invalid window 0xffffffff
5/19/13 10:16:55.698 AM coreservicesd[71]: Application App:"loginwindow" [ 0x0/0x1001] @ 0x0x7feea3e27a40 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0xa10a1:) ), so denying.
5/19/13 10:16:55.698 AM WindowServer[115]: [cps/setfront] Failed setting the front application to loginwindow, psn 0x0-0x1001, securitySessionID=0x186a3, err=-13066
5/19/13 10:19:53.250 AM diskarbitrationd[49]: loginwindow [38]:45339 not responding.
5/19/13 10:21:16.038 AM mdworker[672]: Unable to talk to lsboxd
5/19/13 10:21:16.099 AM sandboxd[675]: ([672]) mdworker(672) deny mach-lookup com.apple.ls.boxd
5/19/13 10:21:16.000 AM kernel[0]: Sandbox: sandboxd(675) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:21:34.901 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:22:52.124 AM com.apple.backupd[526]: Backup verification passed!
5/19/13 10:23:18.342 AM mdworker[682]: Unable to talk to lsboxd
5/19/13 10:23:18.389 AM sandboxd[683]: ([682]) mdworker(682) deny mach-lookup com.apple.ls.boxd
5/19/13 10:23:18.000 AM kernel[0]: Sandbox: sandboxd(683) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:25:15.164 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:25:42.916 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x1c-10.0.1.7:0!
5/19/13 10:26:39.952 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:27:20.173 AM mdworker[687]: Unable to talk to lsboxd
5/19/13 10:27:20.240 AM sandboxd[693]: ([687]) mdworker(687) deny mach-lookup com.apple.ls.boxd
5/19/13 10:27:20.000 AM kernel[0]: Sandbox: sandboxd(693) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:31:21.939 AM mdworker[702]: Unable to talk to lsboxd
5/19/13 10:31:21.989 AM sandboxd[703]: ([702]) mdworker(702) deny mach-lookup com.apple.ls.boxd
5/19/13 10:31:22.000 AM kernel[0]: Sandbox: sandboxd(703) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:33:22.745 AM mdworker[711]: Unable to talk to lsboxd
5/19/13 10:33:22.811 AM sandboxd[715]: ([711]) mdworker(711) deny mach-lookup com.apple.ls.boxd
5/19/13 10:33:22.000 AM kernel[0]: Sandbox: sandboxd(715) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:34:53.931 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:35:23.904 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x1e-10.0.1.7:0!
5/19/13 10:36:24.862 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:37:24.552 AM mdworker[725]: Unable to talk to lsboxd
5/19/13 10:37:24.620 AM sandboxd[728]: ([725]) mdworker(725) deny mach-lookup com.apple.ls.boxd
5/19/13 10:37:25.000 AM kernel[0]: Sandbox: sandboxd(728) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:41:26.317 AM mdworker[736]: Unable to talk to lsboxd
5/19/13 10:41:26.365 AM sandboxd[737]: ([736]) mdworker(736) deny mach-lookup com.apple.ls.boxd
5/19/13 10:41:26.000 AM kernel[0]: Sandbox: sandboxd(737) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:43:28.105 AM mdworker[742]: Unable to talk to lsboxd
5/19/13 10:43:28.154 AM sandboxd[743]: ([742]) mdworker(742) deny mach-lookup com.apple.ls.boxd
5/19/13 10:43:28.000 AM kernel[0]: Sandbox: sandboxd(743) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:44:33.007 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:45:02.885 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x20-10.0.1.7:0!
5/19/13 10:47:29.921 AM mdworker[750]: Unable to talk to lsboxd
5/19/13 10:47:29.986 AM sandboxd[753]: ([750]) mdworker(750) deny mach-lookup com.apple.ls.boxd
5/19/13 10:47:30.000 AM kernel[0]: Sandbox: sandboxd(753) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:51:16.977 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:51:33.259 AM mdworker[768]: Unable to talk to lsboxd
5/19/13 10:51:33.307 AM sandboxd[769]: ([768]) mdworker(768) deny mach-lookup com.apple.ls.boxd
5/19/13 10:51:33.000 AM kernel[0]: Sandbox: sandboxd(769) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:53:35.049 AM mdworker[773]: Unable to talk to lsboxd
5/19/13 10:53:35.100 AM sandboxd[774]: ([773]) mdworker(773) deny mach-lookup com.apple.ls.boxd
5/19/13 10:53:35.000 AM kernel[0]: Sandbox: sandboxd(774) deny mach-lookup com.apple.coresymbolicationd
5/19/13 10:54:13.000 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 10:54:42.809 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x22-10.0.1.7:0!
5/19/13 10:59:39.946 AM mdworker[794]: Unable to talk to lsboxd
5/19/13 10:59:39.995 AM sandboxd[795]: ([794]) mdworker(794) deny mach-lookup com.apple.ls.boxd
5/19/13 10:59:40.000 AM kernel[0]: Sandbox: sandboxd(795) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:01:40.742 AM mdworker[801]: Unable to talk to lsboxd
5/19/13 11:01:40.794 AM sandboxd[803]: ([801]) mdworker(801) deny mach-lookup com.apple.ls.boxd
5/19/13 11:01:41.000 AM kernel[0]: Sandbox: sandboxd(803) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:03:42.869 AM mdworker[810]: Unable to talk to lsboxd
5/19/13 11:03:42.919 AM sandboxd[811]: ([810]) mdworker(810) deny mach-lookup com.apple.ls.boxd
5/19/13 11:03:43.000 AM kernel[0]: Sandbox: sandboxd(811) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:03:52.995 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:04:22.860 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x23-10.0.1.7:0!
5/19/13 11:05:57.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=827[GoogleSoftwareUp] clearing CS_VALID
5/19/13 11:06:05.706 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:08:17.341 AM mdworker[840]: Unable to talk to lsboxd
5/19/13 11:08:17.394 AM sandboxd[841]: ([840]) mdworker(840) deny mach-lookup com.apple.ls.boxd
5/19/13 11:08:17.000 AM kernel[0]: Sandbox: sandboxd(841) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:08:34.845 AM com.apple.backupd[844]: Starting automatic backup
5/19/13 11:08:34.862 AM com.apple.backupd[844]: Network destination already mounted at: /Volumes/Data
5/19/13 11:09:01.916 AM mds[34]: (Error) Volume: Root store set to FSOnly with matching create! (loaded:1)
5/19/13 11:09:02.689 AM com.apple.backupd[844]: Disk image /Volumes/Data/Big iMac (7).sparsebundle mounted at: /Volumes/Time Machine Backups
5/19/13 11:09:02.691 AM com.apple.backupd[844]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
5/19/13 11:09:05.396 AM com.apple.backupd[844]: Using file event preflight for 27iMac
5/19/13 11:09:07.804 AM com.apple.backupd[844]: Will copy (1.3 MB) from 27iMac
5/19/13 11:09:07.805 AM com.apple.backupd[844]: Using file event preflight for LaCie 1 TB
5/19/13 11:09:07.805 AM com.apple.backupd[844]: Will copy (Zero KB) from LaCie 1 TB
5/19/13 11:09:07.806 AM com.apple.backupd[844]: Found 54 files (1.3 MB) needing backup
5/19/13 11:09:07.814 AM com.apple.backupd[844]: 104.9 MB required (including padding), 1.53 TB available
5/19/13 11:09:07.815 AM com.apple.backupd[844]: Waiting for index to be ready (100)
5/19/13 11:09:18.151 AM mdworker[869]: Unable to talk to lsboxd
5/19/13 11:09:18.206 AM sandboxd[871]: ([869]) mdworker(869) deny mach-lookup com.apple.ls.boxd
5/19/13 11:09:18.000 AM kernel[0]: Sandbox: sandboxd(871) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:09:42.566 AM com.apple.backupd[844]: Copied 1868 files (7.2 MB) from volume 27iMac.
5/19/13 11:09:46.543 AM com.apple.backupd[844]: Copied 1875 files (7.2 MB) from volume LaCie 1 TB.
5/19/13 11:09:46.573 AM com.apple.backupd[844]: Using file event preflight for 27iMac
5/19/13 11:09:46.577 AM com.apple.backupd[844]: Will copy (1 MB) from 27iMac
5/19/13 11:09:46.580 AM com.apple.backupd[844]: Found 27 files (1 MB) needing backup
5/19/13 11:09:46.580 AM com.apple.backupd[844]: 2.55 GB required (including padding), 1.53 TB available
5/19/13 11:10:00.753 AM com.apple.backupd[844]: Copied 705 files (1 MB) from volume 27iMac.
5/19/13 11:10:04.275 AM com.apple.backupd[844]: Copied 712 files (1 MB) from volume LaCie 1 TB.
5/19/13 11:10:04.866 AM com.apple.backupd[844]: Created new backup: 2013-05-19-111004
5/19/13 11:10:05.251 AM com.apple.backupd[844]: Starting post-backup thinning
5/19/13 11:10:17.744 AM com.apple.backupd[844]: Deleted /Volumes/Time Machine Backups/Backups.backupdb/Big iMac (7)/2013-05-15-193013 (7.9 MB)
5/19/13 11:10:17.744 AM com.apple.backupd[844]: Post-back up thinning complete: 1 expired backups removed
5/19/13 11:10:17.856 AM com.apple.backupd[844]: Backup completed successfully.
5/19/13 11:10:21.667 AM com.apple.backupd[844]: Ejected Time Machine disk image: /Volumes/Data/Big iMac (7).sparsebundle
5/19/13 11:10:21.000 AM kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Data, flags 0, pid 880
5/19/13 11:10:22.139 AM com.apple.backupd[844]: Ejected Time Machine network volume.
5/19/13 11:10:22.000 AM kernel[0]: AFP_VFS afpfs_unmount : We are the last mnt/sbmnt using volume /Volumes/Data 0xffffff814b022008
5/19/13 11:10:22.000 AM kernel[0]: AFP_VFS afpfs_unmount : We are the last volume using socket /Volumes/Data 0xffffff814b022008
5/19/13 11:10:22.000 AM kernel[0]: AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed
5/19/13 11:11:20.009 AM mdworker[887]: Unable to talk to lsboxd
5/19/13 11:11:20.070 AM sandboxd[890]: ([887]) mdworker(887) deny mach-lookup com.apple.ls.boxd
5/19/13 11:11:20.000 AM kernel[0]: Sandbox: sandboxd(890) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:13:33.912 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:15:23.412 AM mdworker[906]: Unable to talk to lsboxd
5/19/13 11:15:23.481 AM sandboxd[909]: ([906]) mdworker(906) deny mach-lookup com.apple.ls.boxd
5/19/13 11:15:23.000 AM kernel[0]: Sandbox: sandboxd(909) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:19:25.217 AM mdworker[918]: Unable to talk to lsboxd
5/19/13 11:19:25.284 AM sandboxd[921]: ([918]) mdworker(918) deny mach-lookup com.apple.ls.boxd
5/19/13 11:19:25.000 AM kernel[0]: Sandbox: sandboxd(921) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:20:54.745 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:21:26.014 AM mdworker[927]: Unable to talk to lsboxd
5/19/13 11:21:26.000 AM kernel[0]: Sandbox: sandboxd(928) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:21:26.278 AM sandboxd[928]: ([927]) mdworker(927) deny mach-lookup com.apple.ls.boxd
5/19/13 11:22:11.852 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:22:41.877 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x27-10.0.1.7:0!
5/19/13 11:26:07.171 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:26:08.704 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:26:31.436 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:26:34.203 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:29:29.966 AM mdworker[949]: Unable to talk to lsboxd
5/19/13 11:29:30.024 AM sandboxd[951]: ([949]) mdworker(949) deny mach-lookup com.apple.ls.boxd
5/19/13 11:29:30.000 AM kernel[0]: Sandbox: sandboxd(951) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:31:30.768 AM mdworker[965]: Unable to talk to lsboxd
5/19/13 11:31:30.821 AM sandboxd[966]: ([965]) mdworker(965) deny mach-lookup com.apple.ls.boxd
5/19/13 11:31:31.000 AM kernel[0]: Sandbox: sandboxd(966) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:33:32.571 AM mdworker[975]: Unable to talk to lsboxd
5/19/13 11:33:32.638 AM sandboxd[978]: ([975]) mdworker(975) deny mach-lookup com.apple.ls.boxd
5/19/13 11:33:33.000 AM kernel[0]: Sandbox: sandboxd(978) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:35:44.705 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:37:34.616 AM mdworker[988]: Unable to talk to lsboxd
5/19/13 11:37:34.679 AM sandboxd[991]: ([988]) mdworker(988) deny mach-lookup com.apple.ls.boxd
5/19/13 11:37:35.000 AM kernel[0]: Sandbox: sandboxd(991) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:39:36.385 AM mdworker[1000]: Unable to talk to lsboxd
5/19/13 11:39:36.436 AM sandboxd[1001]: ([1000]) mdworker(1000) deny mach-lookup com.apple.ls.boxd
5/19/13 11:39:36.000 AM kernel[0]: Sandbox: sandboxd(1001) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:40:52.828 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:41:22.730 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x2e-10.0.1.7:0!
5/19/13 11:41:38.145 AM mdworker[1004]: Unable to talk to lsboxd
5/19/13 11:41:38.194 AM sandboxd[1005]: ([1004]) mdworker(1004) deny mach-lookup com.apple.ls.boxd
5/19/13 11:41:38.000 AM kernel[0]: Sandbox: sandboxd(1005) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:47:41.519 AM mdworker[1021]: Unable to talk to lsboxd
5/19/13 11:47:41.587 AM sandboxd[1024]: ([1021]) mdworker(1021) deny mach-lookup com.apple.ls.boxd
5/19/13 11:47:41.000 AM kernel[0]: Sandbox: sandboxd(1024) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:49:44.917 AM mdworker[1033]: Unable to talk to lsboxd
5/19/13 11:49:44.968 AM sandboxd[1035]: ([1033]) mdworker(1033) deny mach-lookup com.apple.ls.boxd
5/19/13 11:49:45.000 AM kernel[0]: Sandbox: sandboxd(1035) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:50:33.746 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 11:51:02.729 AM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x2f-10.0.1.7:0!
5/19/13 11:51:46.701 AM mdworker[1038]: Unable to talk to lsboxd
5/19/13 11:51:46.750 AM sandboxd[1040]: ([1038]) mdworker(1038) deny mach-lookup com.apple.ls.boxd
5/19/13 11:51:46.000 AM kernel[0]: Sandbox: sandboxd(1040) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:57:50.095 AM mdworker[1058]: Unable to talk to lsboxd
5/19/13 11:57:50.156 AM sandboxd[1061]: ([1058]) mdworker(1058) deny mach-lookup com.apple.ls.boxd
5/19/13 11:57:50.000 AM kernel[0]: Sandbox: sandboxd(1061) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:58:50.869 AM mdworker[1067]: Unable to talk to lsboxd
5/19/13 11:58:50.922 AM sandboxd[1068]: ([1067]) mdworker(1067) deny mach-lookup com.apple.ls.boxd
5/19/13 11:58:50.000 AM kernel[0]: Sandbox: sandboxd(1068) deny mach-lookup com.apple.coresymbolicationd
5/19/13 11:59:39.640 AM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:00:09.702 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x31-10.0.1.8:0!
5/19/13 12:00:13.739 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:00:42.731 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x32-10.0.1.7:0!
5/19/13 12:00:52.683 PM mdworker[1074]: Unable to talk to lsboxd
5/19/13 12:00:52.747 PM sandboxd[1078]: ([1074]) mdworker(1074) deny mach-lookup com.apple.ls.boxd
5/19/13 12:00:53.000 PM kernel[0]: Sandbox: sandboxd(1078) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:04:40.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1092[GoogleSoftwareUp] clearing CS_VALID
5/19/13 12:04:47.477 PM com.apple.SecurityServer[25]: Session 100016 created
5/19/13 12:04:48.686 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:04:56.029 PM mdworker[1098]: Unable to talk to lsboxd
5/19/13 12:04:56.078 PM sandboxd[1099]: ([1098]) mdworker(1098) deny mach-lookup com.apple.ls.boxd
5/19/13 12:04:56.000 PM kernel[0]: Sandbox: sandboxd(1099) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:08:34.954 PM com.apple.backupd[1110]: Starting automatic backup
5/19/13 12:08:34.963 PM com.apple.backupd[1110]: Attempting to mount network destination URL: afp://johnp;[email protected]/Data
5/19/13 12:08:43.648 PM com.apple.backupd[1110]: Mounted network destination at mount point: /Volumes/Data using URL: afp://johnp;[email protected]/Data
5/19/13 12:08:43.000 PM kernel[0]: ASP_TCP asp_tcp_usr_control: invalid kernelUseCount 0
5/19/13 12:08:43.000 PM kernel[0]: AFP_VFS afpfs_mount: /Volumes/Data, pid 1112
5/19/13 12:08:43.000 PM kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff814b031008 /Volumes/Data (error = 0, retval = 0)
5/19/13 12:08:58.446 PM mdworker[1119]: Unable to talk to lsboxd
5/19/13 12:08:58.513 PM sandboxd[1122]: ([1119]) mdworker(1119) deny mach-lookup com.apple.ls.boxd
5/19/13 12:08:58.000 PM kernel[0]: Sandbox: sandboxd(1122) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:09:05.731 PM mds[34]: (Error) Volume: Root store set to FSOnly with matching create! (loaded:1)
5/19/13 12:09:06.392 PM com.apple.backupd[1110]: Disk image /Volumes/Data/Big iMac (7).sparsebundle mounted at: /Volumes/Time Machine Backups
5/19/13 12:09:06.430 PM com.apple.backupd[1110]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
5/19/13 12:09:07.767 PM com.apple.backupd[1110]: Using file event preflight for 27iMac
5/19/13 12:09:08.750 PM com.apple.backupd[1110]: Will copy (5.7 MB) from 27iMac
5/19/13 12:09:08.752 PM com.apple.backupd[1110]: Using file event preflight for LaCie 1 TB
5/19/13 12:09:08.752 PM com.apple.backupd[1110]: Will copy (Zero KB) from LaCie 1 TB
5/19/13 12:09:08.752 PM com.apple.backupd[1110]: Found 61 files (5.7 MB) needing backup
5/19/13 12:09:08.761 PM com.apple.backupd[1110]: 2.55 GB required (including padding), 1.53 TB available
5/19/13 12:09:46.037 PM com.apple.backupd[1110]: Copied 1850 files (11.6 MB) from volume 27iMac.
5/19/13 12:09:50.037 PM com.apple.backupd[1110]: Copied 1857 files (11.6 MB) from volume LaCie 1 TB.
5/19/13 12:09:50.043 PM com.apple.backupd[1110]: Using file event preflight for 27iMac
5/19/13 12:09:50.047 PM com.apple.backupd[1110]: Will copy (28 KB) from 27iMac
5/19/13 12:09:50.050 PM com.apple.backupd[1110]: Found 23 files (28 KB) needing backup
5/19/13 12:09:50.050 PM com.apple.backupd[1110]: 2.55 GB required (including padding), 1.53 TB available
5/19/13 12:09:52.812 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:10:01.724 PM com.apple.backupd[1110]: Copied 669 files (28 KB) from volume 27iMac.
5/19/13 12:10:05.158 PM com.apple.backupd[1110]: Copied 676 files (28 KB) from volume LaCie 1 TB.
5/19/13 12:10:05.681 PM com.apple.backupd[1110]: Created new backup: 2013-05-19-121005
5/19/13 12:10:06.003 PM com.apple.backupd[1110]: Starting post-backup thinning
5/19/13 12:10:06.003 PM com.apple.backupd[1110]: No post-back up thinning needed: no expired backups exist
5/19/13 12:10:06.631 PM com.apple.backupd[1110]: Backup completed successfully.
5/19/13 12:10:10.301 PM com.apple.backupd[1110]: Ejected Time Machine disk image: /Volumes/Data/Big iMac (7).sparsebundle
5/19/13 12:10:10.799 PM com.apple.backupd[1110]: Ejected Time Machine network volume.
5/19/13 12:10:10.000 PM kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Data, flags 0, pid 1155
5/19/13 12:10:10.000 PM kernel[0]: AFP_VFS afpfs_unmount : We are the last mnt/sbmnt using volume /Volumes/Data 0xffffff814b031008
5/19/13 12:10:10.000 PM kernel[0]: AFP_VFS afpfs_unmount : We are the last volume using socket /Volumes/Data 0xffffff814b031008
5/19/13 12:10:10.000 PM kernel[0]: AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed
5/19/13 12:11:00.314 PM mdworker[1161]: Unable to talk to lsboxd
5/19/13 12:11:00.371 PM sandboxd[1166]: ([1161]) mdworker(1161) deny mach-lookup com.apple.ls.boxd
5/19/13 12:11:00.000 PM kernel[0]: Sandbox: sandboxd(1166) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:14:38.816 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:14:40.658 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:15:02.167 PM mdworker[1177]: Unable to talk to lsboxd
5/19/13 12:15:02.229 PM sandboxd[1180]: ([1177]) mdworker(1177) deny mach-lookup com.apple.ls.boxd
5/19/13 12:15:02.000 PM kernel[0]: Sandbox: sandboxd(1180) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:19:32.809 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:21:05.567 PM mdworker[1196]: Unable to talk to lsboxd
5/19/13 12:21:05.628 PM sandboxd[1199]: ([1196]) mdworker(1196) deny mach-lookup com.apple.ls.boxd
5/19/13 12:21:06.000 PM kernel[0]: Sandbox: sandboxd(1199) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:21:59.649 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:23:06.364 PM mdworker[1207]: Unable to talk to lsboxd
5/19/13 12:23:06.418 PM sandboxd[1208]: ([1207]) mdworker(1207) deny mach-lookup com.apple.ls.boxd
5/19/13 12:23:06.000 PM kernel[0]: Sandbox: sandboxd(1208) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:25:20.561 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:27:08.152 PM mdworker[1216]: Unable to talk to lsboxd
5/19/13 12:27:08.213 PM sandboxd[1219]: ([1216]) mdworker(1216) deny mach-lookup com.apple.ls.boxd
5/19/13 12:27:08.000 PM kernel[0]: Sandbox: sandboxd(1219) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:29:29.698 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:31:11.534 PM mdworker[1235]: Unable to talk to lsboxd
5/19/13 12:31:11.596 PM sandboxd[1238]: ([1235]) mdworker(1235) deny mach-lookup com.apple.ls.boxd
5/19/13 12:31:11.000 PM kernel[0]: Sandbox: sandboxd(1238) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:34:19.696 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:35:13.380 PM mdworker[1247]: Unable to talk to lsboxd
5/19/13 12:35:13.442 PM sandboxd[1250]: ([1247]) mdworker(1247) deny mach-lookup com.apple.ls.boxd
5/19/13 12:35:13.000 PM kernel[0]: Sandbox: sandboxd(1250) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:36:09.366 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:36:38.169 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x3e-10.0.1.7:0!
5/19/13 12:41:49.133 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 04:f7:e4:01:54:5c@fe80::6f7:e4ff:fe01:545c._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:43:18.348 PM mdworker[1278]: Unable to talk to lsboxd
5/19/13 12:43:18.412 PM sandboxd[1281]: ([1278]) mdworker(1278) deny mach-lookup com.apple.ls.boxd
5/19/13 12:43:18.000 PM kernel[0]: Sandbox: sandboxd(1281) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:43:57.542 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:44:27.613 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x41-10.0.1.7:0!
5/19/13 12:44:37.169 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 04:f7:e4:01:54:5c@fe80::6f7:e4ff:fe01:545c._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:45:07.326 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x42-10.0.1.6:0!
5/19/13 12:45:14.650 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:45:14.651 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:45:20.065 PM mdworker[1287]: Unable to talk to lsboxd
5/19/13 12:45:20.000 PM kernel[0]: Sandbox: sandboxd(1290) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:45:20.116 PM sandboxd[1290]: ([1287]) mdworker(1287) deny mach-lookup com.apple.ls.boxd
5/19/13 12:48:24.079 PM mdworker[1304]: Unable to talk to lsboxd
5/19/13 12:48:24.141 PM sandboxd[1307]: ([1304]) mdworker(1304) deny mach-lookup com.apple.ls.boxd
5/19/13 12:48:24.000 PM kernel[0]: Sandbox: sandboxd(1307) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:49:49.288 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:50:02.494 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:51:18.067 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:51:31.276 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:51:54.930 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:52:10.617 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb374a3bc00>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.CalendarAgent.push-user=503 darkWakeEnabled-env=production
5/19/13 12:52:10.618 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb374a3bc00>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.CalendarAgent.push-user=503 darkWakeEnabled-env=production
5/19/13 12:52:10.619 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb374a3bc00>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.CalendarAgent.push-user=503 darkWakeEnabled-env=production
5/19/13 12:52:24.754 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x49-10.0.1.8:0!
5/19/13 12:52:25.904 PM mdworker[1318]: Unable to talk to lsboxd
5/19/13 12:52:25.964 PM sandboxd[1321]: ([1318]) mdworker(1318) deny mach-lookup com.apple.ls.boxd
5/19/13 12:52:26.000 PM kernel[0]: Sandbox: sandboxd(1321) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:53:03.789 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb376c12260>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=503-env=production
5/19/13 12:53:03.790 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb376c12260>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=503-env=production
5/19/13 12:53:03.790 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb376c12260>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=503-env=production
5/19/13 12:54:26.709 PM mdworker[1330]: Unable to talk to lsboxd
5/19/13 12:54:26.764 PM sandboxd[1331]: ([1330]) mdworker(1330) deny mach-lookup com.apple.ls.boxd
5/19/13 12:54:27.000 PM kernel[0]: Sandbox: sandboxd(1331) deny mach-lookup com.apple.coresymbolicationd
5/19/13 12:57:42.684 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:58:06.953 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:58:42.587 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 12:59:12.612 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x4c-10.0.1.7:0!
5/19/13 1:02:30.686 PM mdworker[1352]: Unable to talk to lsboxd
5/19/13 1:02:30.753 PM sandboxd[1357]: ([1352]) mdworker(1352) deny mach-lookup com.apple.ls.boxd
5/19/13 1:02:31.000 PM kernel[0]: Sandbox: sandboxd(1357) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:03:23.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1363[GoogleSoftwareUp] clearing CS_VALID
5/19/13 1:03:32.494 PM mdworker[1365]: Unable to talk to lsboxd
5/19/13 1:03:32.000 PM kernel[0]: Sandbox: sandboxd(1367) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:03:32.545 PM sandboxd[1367]: ([1365]) mdworker(1365) deny mach-lookup com.apple.ls.boxd
5/19/13 1:03:39.956 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:03:54.397 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 04:f7:e4:01:54:5c@fe80::6f7:e4ff:fe01:545c._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:04:15.597 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:04:15.906 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:04:23.283 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x4e-10.0.1.6:0!
5/19/13 1:04:45.864 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x50-10.0.1.7:0!
5/19/13 1:05:30.403 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb376c12260>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=503-env=production
5/19/13 1:05:30.404 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb376c12260>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=503-env=production
5/19/13 1:05:30.406 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb376c12260>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=503-env=production
5/19/13 1:05:34.290 PM mdworker[1375]: Unable to talk to lsboxd
5/19/13 1:05:34.358 PM sandboxd[1378]: ([1375]) mdworker(1375) deny mach-lookup com.apple.ls.boxd
5/19/13 1:05:34.000 PM kernel[0]: Sandbox: sandboxd(1378) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:05:59.736 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:06:38.691 PM com.apple.launchd.peruser.503[229]: (0x7fd5cb92a010.anonymous.com.apple.dock.[339]) Unmanaged jobs may not make XPC Events requests.
5/19/13 1:06:38.691 PM com.apple.dock.extra[339]: Event channel check-in failed: com.apple.usernotificationcenter.matching: 0x1: Operation not permitted
5/19/13 1:06:38.691 PM com.apple.dock.extra[339]: Bug: 12D78: libxpc.dylib + 35251 [BBE558BD-5E55-35E4-89ED-1AA6B056D05A]: 0x1
5/19/13 1:06:38.692 PM com.apple.dock.extra[339]: Got bogus event on event stream listener connection. You may have called xpc_set_event_stream_handler() more than once for the same stream: <error: 0x7fff7e878ca0> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff7e878c20> { length = 18, contents = "Connection invalid" }
5/19/13 1:06:38.811 PM com.apple.SecurityServer[25]: Session 100019 created
5/19/13 1:06:39.443 PM WindowServer[115]: kCGErrorIllegalArgument: _CGXRemoveWindowFromWindowMovementGroup: Window not in group
5/19/13 1:06:41.002 PM Messages[1383]: [Warning] Could not find transfer for guid: 978F7947-A674-4580-86B5-B7850F738B6E
5/19/13 1:06:41.002 PM Messages[1383]: [Warning] Could not find transfer for guid: 0BF9128C-961F-4E40-9D43-7945C852F4FD
5/19/13 1:06:41.514 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 04:f7:e4:01:54:5c@fe80::6f7:e4ff:fe01:545c._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:06:41.518 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:06:56.469 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.469 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.469 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.469 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.470 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.487 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.487 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.487 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.488 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.488 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.488 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.488 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.488 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.489 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:06:56.489 PM WindowServer[115]: CGXGetConnectionProperty: Invalid connection 80099
5/19/13 1:07:02.303 PM Mail[1394]: Using V2 Layout
5/19/13 1:07:02.701 PM com.apple.SecurityServer[25]: Killing auth hosts
5/19/13 1:07:02.701 PM com.apple.SecurityServer[25]: Session 100010 destroyed
5/19/13 1:07:02.718 PM com.apple.SecurityServer[25]: Session 100020 created
5/19/13 1:07:05.434 PM librariand[1396]: MMe quota status changed: under quota
5/19/13 1:07:14.140 PM Mail[1394]: *** -[IADomainCache init]: IA domains cache is out of date.
5/19/13 1:07:15.807 PM SyncServer[1403]: [0x7fe4d2c0be80] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
5/19/13 1:08:07.775 PM WindowServer[115]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
5/19/13 1:08:18.267 PM mdworker[1410]: Unable to talk to lsboxd
5/19/13 1:08:18.319 PM sandboxd[1411]: ([1410]) mdworker(1410) deny mach-lookup com.apple.ls.boxd
5/19/13 1:08:18.000 PM kernel[0]: Sandbox: sandboxd(1411) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:08:35.984 PM com.apple.backupd[1418]: Starting automatic backup
5/19/13 1:08:35.993 PM com.apple.backupd[1418]: Attempting to mount network destination URL: afp://johnp;[email protected]/Data
5/19/13 1:08:44.593 PM com.apple.backupd[1418]: Mounted network destination at mount point: /Volumes/Data using URL: afp://johnp;[email protected]/Data
5/19/13 1:08:44.000 PM kernel[0]: ASP_TCP asp_tcp_usr_control: invalid kernelUseCount 0
5/19/13 1:08:44.000 PM kernel[0]: AFP_VFS afpfs_mount: /Volumes/Data, pid 1420
5/19/13 1:08:44.000 PM kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff814afc6008 /Volumes/Data (error = 0, retval = 0)
5/19/13 1:09:04.207 PM mds[34]: (Error) Volume: Root store set to FSOnly with matching create! (loaded:1)
5/19/13 1:09:04.879 PM com.apple.backupd[1418]: Disk image /Volumes/Data/Big iMac (7).sparsebundle mounted at: /Volumes/Time Machine Backups
5/19/13 1:09:04.882 PM com.apple.backupd[1418]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
5/19/13 1:09:07.098 PM com.apple.backupd[1418]: Using file event preflight for 27iMac
5/19/13 1:09:08.416 PM com.apple.backupd[1418]: Will copy (8.7 MB) from 27iMac
5/19/13 1:09:08.420 PM com.apple.backupd[1418]: Using file event preflight for LaCie 1 TB
5/19/13 1:09:08.420 PM com.apple.backupd[1418]: Will copy (Zero KB) from LaCie 1 TB
5/19/13 1:09:08.420 PM com.apple.backupd[1418]: Found 203 files (8.7 MB) needing backup
5/19/13 1:09:08.430 PM com.apple.backupd[1418]: 2.56 GB required (including padding), 1.53 TB available
5/19/13 1:10:06.833 PM com.apple.backupd[1418]: Copied 4720 files (17.5 MB) from volume 27iMac.
5/19/13 1:10:10.102 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 04:f7:e4:01:54:5c@fe80::6f7:e4ff:fe01:545c._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:10:11.056 PM com.apple.backupd[1418]: Copied 4727 files (17.5 MB) from volume LaCie 1 TB.
5/19/13 1:10:11.062 PM com.apple.backupd[1418]: Using file event preflight for 27iMac
5/19/13 1:10:11.071 PM com.apple.backupd[1418]: Will copy (2 MB) from 27iMac
5/19/13 1:10:11.073 PM com.apple.backupd[1418]: Found 46 files (2 MB) needing backup
5/19/13 1:10:11.074 PM com.apple.backupd[1418]: 2.55 GB required (including padding), 1.53 TB available
5/19/13 1:10:19.134 PM mdworker[1455]: Unable to talk to lsboxd
5/19/13 1:10:19.201 PM sandboxd[1460]: ([1455]) mdworker(1455) deny mach-lookup com.apple.ls.boxd
5/19/13 1:10:19.000 PM kernel[0]: Sandbox: sandboxd(1460) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:10:25.521 PM com.apple.backupd[1418]: Copied 827 files (2.2 MB) from volume 27iMac.
5/19/13 1:10:28.887 PM com.apple.backupd[1418]: Copied 834 files (2.2 MB) from volume LaCie 1 TB.
5/19/13 1:10:29.458 PM com.apple.backupd[1418]: Created new backup: 2013-05-19-131028
5/19/13 1:10:30.828 PM com.apple.backupd[1418]: Starting post-backup thinning
5/19/13 1:10:30.828 PM com.apple.backupd[1418]: No post-back up thinning needed: no expired backups exist
5/19/13 1:10:31.429 PM com.apple.backupd[1418]: Backup completed successfully.
5/19/13 1:10:35.389 PM com.apple.backupd[1418]: Ejected Time Machine disk image: /Volumes/Data/Big iMac (7).sparsebundle
5/19/13 1:10:35.000 PM kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Data, flags 0, pid 1468
5/19/13 1:10:35.000 PM kernel[0]: AFP_VFS afpfs_unmount : We are the last mnt/sbmnt using volume /Volumes/Data 0xffffff814afc6008
5/19/13 1:10:35.000 PM kernel[0]: AFP_VFS afpfs_unmount : We are the last volume using socket /Volumes/Data 0xffffff814afc6008
5/19/13 1:10:35.000 PM kernel[0]: AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed
5/19/13 1:10:35.962 PM com.apple.backupd[1418]: Ejected Time Machine network volume.
5/19/13 1:13:28.861 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:15:36.656 PM mdworker[1483]: Unable to talk to lsboxd
5/19/13 1:15:36.721 PM sandboxd[1488]: ([1483]) mdworker(1483) deny mach-lookup com.apple.ls.boxd
5/19/13 1:15:36.000 PM kernel[0]: Sandbox: sandboxd(1488) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:18:27.823 PM CVMServer[134]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
5/19/13 1:18:28.349 PM CVMServer[134]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
5/19/13 1:18:29.916 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:18:38.580 PM Safari[1498]: CGContextClipToRect: invalid context 0x0
5/19/13 1:19:40.023 PM mdworker[1512]: Unable to talk to lsboxd
5/19/13 1:19:40.072 PM sandboxd[1514]: ([1512]) mdworker(1512) deny mach-lookup com.apple.ls.boxd
5/19/13 1:19:40.000 PM kernel[0]: Sandbox: sandboxd(1514) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:21:29.938 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 04:f7:e4:01:54:5c@fe80::6f7:e4ff:fe01:545c._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:22:58.722 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 04:f7:e4:01:54:5c@fe80::6f7:e4ff:fe01:545c._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:23:06.655 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb376c12260>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=503-env=production
5/19/13 1:23:06.662 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb376c12260>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=503-env=production
5/19/13 1:23:06.666 PM apsd[57]: <APSConnectionNotificationQueue: 0x7fb376c12260>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=503-env=production
5/19/13 1:23:07.626 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:23:28.873 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x58-10.0.1.6:0!
5/19/13 1:23:37.563 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x59-10.0.1.7:0!
5/19/13 1:23:41.878 PM mdworker[1523]: Unable to talk to lsboxd
5/19/13 1:23:41.000 PM kernel[0]: Sandbox: sandboxd(1526) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:23:42.329 PM sandboxd[1526]: ([1523]) mdworker(1523) deny mach-lookup com.apple.ls.boxd
5/19/13 1:26:23.313 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:26:23.319 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:26:35.364 PM com.apple.SecurityServer[25]: Killing auth hosts
5/19/13 1:26:35.364 PM com.apple.SecurityServer[25]: Session 100019 destroyed
5/19/13 1:26:35.390 PM com.apple.SecurityServer[25]: Session 100021 created
5/19/13 1:29:00.844 PM mdworker[1555]: Unable to talk to lsboxd
5/19/13 1:29:00.893 PM sandboxd[1556]: ([1555]) mdworker(1555) deny mach-lookup com.apple.ls.boxd
5/19/13 1:29:01.000 PM kernel[0]: Sandbox: sandboxd(1556) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:29:56.823 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 04:f7:e4:01:54:5c@fe80::6f7:e4ff:fe01:545c._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:29:57.123 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:29:57.130 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:30:26.871 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x5d-10.0.1.6:0!
5/19/13 1:30:26.994 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x5e-10.0.1.7:0!
5/19/13 1:31:42.496 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:31:59.700 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:32:12.583 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x60-10.0.1.7:0!
5/19/13 1:35:05.846 PM mdworker[1578]: Unable to talk to lsboxd
5/19/13 1:35:05.907 PM sandboxd[1581]: ([1578]) mdworker(1578) deny mach-lookup com.apple.ls.boxd
5/19/13 1:35:06.000 PM kernel[0]: Sandbox: sandboxd(1581) deny mach-lookup com.apple.coresymbolicationd
5/19/13 1:35:30.442 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:35:30.744 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:35:48.564 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:36:03.308 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:36:09.761 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:36:32.393 PM com.apple.usbmuxd[20]: _heartbeat_failed heartbeat detected detach for device 0x65-10.0.1.7:0!
5/19/13 1:36:49.695 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device 4c:b1:99:47:b3:55@fe80::4eb1:99ff:fe47:b355._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
5/19/13 1:36:54.303 PM com.apple.usbmuxd[20]: _SendAttachNotification (thread 0x7fff7eb12180): Device e4:8b:7f:99:de:86@fe80::e68b:7fff:fe99:de86._apple -
Satellite P505D-s3859 random slow down then crash
I got the laptop with Windows Vista, had this problem (along with many other Vista related ones), so I formatted and installed Windows 7 with all the drivers hoping to fix it. Same problem. Doesn't seem to affect Ubuntu Linux when I dual boot over into that, but my laptop reliably crashes or has to be rebooted at least once or twice a day.
The problem seems to be random, but let me describe the normal case that I'm in when it occurs. I will be running Windows 7, multiple browsers, Yammer, Skype, dropbox, winamp and AVG. The first, most obvious symptom is that any USB pariphials will stop working (I use a usb wireless mouse) and the sound will go into uber-slow motion mode. At this point, everything on the laptop will be ultra slow to respond, but I can still close my apps down if I do it quickly. If I'm not using any external usb nor listening to an audio file, and I miss the slow down event, the laptop will eventually crash.
When this happens, I ctrl-alt-del and check task manager, but I don't see anything particular using up all the resources. I've updated everything I could with the windows 7 drivers from the toshiba site, but still have this problem. It was affecting me with Windows Vista, and this is the second Windows 7 install I've done on this laptop, with the same symptoms.
This is the only thing I see in Event Viewer->Windows Logs->System:
Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 2/25/2011 5:46:41 PM
Event ID: 37
Task Category: (7)
Level: Warning
Keywords:
User: SYSTEM
Computer: sunwu
Description:
The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 7 seconds since the last report.
Log Name: System
Source: Microsoft-Windows-Kernel-Processor-Power
Date: 2/25/2011 5:46:41 PM
Event ID: 37
Task Category: (7)
Level: Warning
Keywords:
User: SYSTEM
Computer: sunwu
Description:
The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 7 seconds since the last report.Satellite P505D-s3859
Maybe this one? (It has all the digits.)
Satellite P505D-S8935
I'm not a hardware guru, but the problem seems consistent with a flaky hard drive. It certainly has nothing to do with software. See what chkdsk c: /r has to say.
The entry in Event Viewer occurs when the processor is throttled back to save battery charge.
-Jerry -
RT target slows down after updating with a shared variable
I am using a shared variable that is defined in the RT target (cFP-2110) to transfer data from the host PC. The shared variable is a cluster of scaling parameters that needs to be stored in the RT target. The host PC is only connected temporarily for system setup and calibration.
There is only one instance of the shared variable in both the host PC vi and the target vi. The shared variable in the host is located in an event case that is activated when there is a value change. Everything works great until I make a value change in the shared variable. The target vi promptly slows from 30mSec to about 500 mSec and stays that way. The only way I can get the RT target to run full speed again is to recycle power or reset it.
What am I doing wrong?
Temporarily slowing down the RT target when the shared variable is updated is not a problem for this application. The problem is that I have to restart the target to get it running at full speed again.
I’m using Win-XP, LV 8.5.1 and FieldPoint 6.0.1
Thanks,
Dave J.Hi Mark,
The host is sending the shared variable via an event case. When the event is activated, the data is sent to the target and it functions as expected, except that it slows down to a crawl. I have to restart the target to get it working up to speed again. The are no error codes.
The shared variable is a cluster of several items and it is attached.
In the mean time to promote the project, I split up the cluster into smaller clusters to use several shared variables and now I do not have a slow down problem. In other words, it works great. As an experiment I have sent the several small clusters at one time and I get the slow-down problem again.
I've come to the conclusion that large single cluster (which is attached) is too much to send at one time.
Please advise if there is something else to learn or understand.
Thanks,
Dave J.
Attachments:
Host Data In.ctl 33 KB -
Database slow down happeing for aperticular window
Hi,
For last few days we are having a issue with database slow down for a perticular window .We took the awr and ash report for that window and it shows the db file sequential read takes more time for aperticular query.But the same query works fine for rest of the day, so how we find the issue happend at that perticular window?
ThanksHi ,
there is not a single query running for that window, multiple sessions are running which are exceuting various queries.
Here is the AWR report for that window( due to size i could past only first half of thw awr report)
WORKLOAD REPOSITORY report for
DB Name DB Id Instance Inst num Release RAC Host
GNVPRD 1315880728 GNVPRD 1 10.2.0.4.0 NO tpora02
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 22711 07-Jul-10 12:00:31 491 15.1
End Snap: 22712 07-Jul-10 13:00:29 550 16.2
Elapsed: 59.97 (mins)
DB Time: 376.21 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 6,144M 6,144M Std Block Size: 8K
Shared Pool Size: 2,048M 2,048M Log Buffer: 5,200K
Load Profile
Per Second Per Transaction
Redo size: 572,299.00 9,239.63
Logical reads: 129,738.24 2,094.59
Block changes: 3,534.49 57.06
Physical reads: 990.77 16.00
Physical writes: 350.18 5.65
User calls: 3,806.67 61.46
Parses: 438.64 7.08
Hard parses: 2.31 0.04
Sorts: 1,112.23 17.96
Logons: 5.56 0.09
Executes: 4,926.11 79.53
Transactions: 61.94
% Blocks changed per Read: 2.72 Recursive Call %: 63.19
Rollback per transaction %: 0.21 Rows per Sort: 9.73
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 99.99 Redo NoWait %: 100.00
Buffer Hit %: 99.25 In-memory Sort %: 100.00
Library Hit %: 99.70 Soft Parse %: 99.47
Execute to Parse %: 91.10 Latch Hit %: 99.89
Parse CPU to Parse Elapsd %: 95.41 % Non-Parse CPU: 98.92
Shared Pool Statistics
Begin End
Memory Usage %: 87.11 87.32
% SQL with executions>1: 71.59 67.41
% Memory for SQL w/exec>1: 78.66 77.94
Top 5 Timed Events
Event Waits Time(s) Avg Wait(ms) % Total Call Time Wait Class
db file sequential read 2,120,397 9,932 5 44.0 User I/O
CPU time 9,284 41.1
db file parallel write 25,213 6,943 275 30.8 System I/O
enq: RO - fast object reuse 553 1,388 2,510 6.1 Application
log file parallel write 200,039 685 3 3.0 System I/O
Main Report
• Report Summary
• Wait Events Statistics
• SQL Statistics
• Instance Activity Statistics
• IO Stats
• Buffer Pool Statistics
• Advisory Statistics
• Wait Statistics
• Undo Statistics
• Latch Statistics
• Segment Statistics
• Dictionary Cache Statistics
• Library Cache Statistics
• Memory Statistics
• Streams Statistics
• Resource Limit Statistics
• init.ora Parameters
Back to Top
Wait Events Statistics
• Time Model Statistics
• Wait Class
• Wait Events
• Background Wait Events
• Operating System Statistics
• Service Statistics
• Service Wait Class Stats
Back to Top
Time Model Statistics
• Total time in database user-calls (DB Time): 22572.5s
• Statistics including the word "background" measure background process time, and so do not contribute to the DB time statistic
• Ordered by % or DB time desc, Statistic name
Statistic Name Time (s) % of DB Time
sql execute elapsed time 21,791.55 96.54
DB CPU 9,283.91 41.13
PL/SQL execution elapsed time 835.47 3.70
connection management call elapsed time 217.19 0.96
parse time elapsed 108.39 0.48
hard parse elapsed time 65.36 0.29
RMAN cpu time (backup/restore) 6.94 0.03
repeated bind elapsed time 1.67 0.01
sequence load elapsed time 1.35 0.01
PL/SQL compilation elapsed time 1.13 0.01
inbound PL/SQL rpc elapsed time 0.46 0.00
hard parse (sharing criteria) elapsed time 0.13 0.00
failed parse elapsed time 0.11 0.00
DB time 22,572.52
background elapsed time 8,108.80
background cpu time 239.28
Back to Wait Events Statistics
Back to Top
Wait Class
• s - second
• cs - centisecond - 100th of a second
• ms - millisecond - 1000th of a second
• us - microsecond - 1000000th of a second
• ordered by wait time desc, waits desc
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn
User I/O 2,252,192 0.00 10,358 5 10.11
System I/O 290,991 0.00 7,754 27 1.31
Application 989 52.88 1,713 1732 0.00
Other 9,008 4.32 862 96 0.04
Commit 123,032 0.01 663 5 0.55
Network 8,045,193 0.00 322 0 36.10
Administrative 8,083 0.00 222 28 0.04
Concurrency 14,492 1.19 21 1 0.07
Configuration 1,039 31.18 3 3 0.00
Back to Wait Events Statistics
Back to Top
Wait Events
• s - second
• cs - centisecond - 100th of a second
• ms - millisecond - 1000th of a second
• us - microsecond - 1000000th of a second
• ordered by wait time desc, waits desc (idle events last)
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn
db file sequential read 2,120,397 0.00 9,932 5 9.51
db file parallel write 25,213 0.00 6,943 275 0.11
enq: RO - fast object reuse 553 82.46 1,388 2510 0.00
log file parallel write 200,039 0.00 685 3 0.90
log file sync 123,032 0.01 663 5 0.55
rdbms ipc reply 417 57.31 486 1166 0.00
db file scattered read 58,713 0.00 334 6 0.26
enq: TX - row lock contention 212 31.60 325 1535 0.00
enq: CI - contention 203 32.02 230 1132 0.00
SQL*Net more data from dblink 697 0.00 197 283 0.00
enq: TX - contention 50 92.00 142 2840 0.00
Backup: sbtwrite2 8,070 0.00 92 11 0.04
read by other session 26,250 0.00 87 3 0.12
SQL*Net more data from client 111,270 0.00 79 1 0.50
Backup: sbtbackup 2 0.00 61 30738 0.00
Backup: sbtremove2 1 0.00 58 57528 0.00
log file sequential read 2,031 0.00 50 25 0.01
Log archive I/O 2,012 0.00 46 23 0.01
SQL*Net more data to client 525,719 0.00 42 0 2.36
RMAN backup & recovery I/O 3,995 0.00 17 4 0.02
control file parallel write 2,081 0.00 11 5 0.01
row cache lock 13 15.38 7 517 0.00
Backup: sbtclose2 2 0.00 6 3210 0.00
latch: cache buffers chains 9,632 0.00 6 1 0.04
Backup: sbtinfo2 2 0.00 4 2249 0.00
SQL*Net message to client 7,407,395 0.00 4 0 33.24
Data file init write 130 0.00 3 26 0.00
latch: library cache 2,556 0.00 3 1 0.01
db file single write 666 0.00 2 3 0.00
control file sequential read 55,562 0.00 2 0 0.25
cursor: pin S wait on X 175 97.14 2 10 0.00
latch free 952 0.21 1 1 0.00
log file switch completion 46 0.00 1 26 0.00
latch: cache buffers lru chain 1,025 0.00 1 1 0.00
os thread startup 12 0.00 1 88 0.00
control file single write 48 0.00 1 21 0.00
write complete waits 1 100.00 1 977 0.00
latch: library cache pin 706 0.00 1 1 0.00
log buffer space 126 0.79 1 5 0.00
LGWR wait for redo copy 3,688 0.41 1 0 0.02
latch: row cache objects 460 0.00 1 1 0.00
switch logfile command 3 0.00 0 162 0.00
enq: TX - index contention 22 0.00 0 18 0.00
library cache lock 1 0.00 0 341 0.00
latch: shared pool 137 0.00 0 2 0.00
latch: enqueue hash chains 103 0.00 0 3 0.00
wait list latch free 9 0.00 0 21 0.00
latch: object queue header operation 137 0.00 0 1 0.00
library cache load lock 6 0.00 0 25 0.00
kksfbc child completion 4 75.00 0 37 0.00
latch: messages 493 0.00 0 0 0.00
SQL*Net break/reset to client 224 0.00 0 1 0.00
latch: session allocation 258 0.00 0 1 0.00
latch: cache buffer handles 125 0.00 0 1 0.00
db file parallel read 12 0.00 0 10 0.00
reliable message 85 0.00 0 1 0.00
buffer busy waits 543 0.00 0 0 0.00
latch: redo writing 543 0.00 0 0 0.00
latch: redo allocation 65 0.00 0 1 0.00
Backup: sbtinit 1 0.00 0 66 0.00
log file single write 10 0.00 0 6 0.00
latch: In memory undo latch 171 0.00 0 0 0.00
direct path read temp 45,810 0.00 0 0 0.21
cursor: pin S 1,325 0.00 0 0 0.01
Backup: sbtend 1 0.00 0 29 0.00
latch: library cache lock 56 0.00 0 0 0.00
log file switch (private strand flush incomplete) 1 0.00 0 21 0.00
latch: checkpoint queue latch 45 0.00 0 0 0.00
ktfbtgex 1 100.00 0 10 0.00
buffer deadlock 18 100.00 0 0 0.00
undo segment extension 322 100.00 0 0 0.00
latch: undo global data 4 0.00 0 1 0.00
direct path write temp 208 0.00 0 0 0.00
SQL*Net message to dblink 112 0.00 0 0 0.00
cursor: mutex S 2 0.00 0 0 0.00
Backup: sbtinit2 1 0.00 0 0 0.00
direct path read 2 0.00 0 0 0.00
direct path write 4 0.00 0 0 0.00
enq: CF - contention 1 0.00 0 0 0.00
SQL*Net message from client 7,407,362 0.00 499,728 67 33.24
wait for unread message on broadcast channel 5,829 100.00 5,696 977 0.03
Streams AQ: waiting for messages in the queue 739 100.00 3,512 4752 0.00
jobq slave wait 538 96.65 1,563 2905 0.00
SQL*Net message from dblink 113 0.00 188 1663 0.00
single-task message 6 0.00 1 91 0.00
class slave wait 2 0.00 0 1 0.00
Back to Wait Events Statistics
Back to Top
Background Wait Events
• ordered by wait time desc, waits desc (idle events last)
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn
db file parallel write 25,213 0.00 6,943 275 0.11
log file parallel write 200,053 0.00 685 3 0.90
log file sequential read 2,003 0.00 50 25 0.01
Log archive I/O 1,985 0.00 46 23 0.01
events in waitclass Other 5,075 0.35 36 7 0.02
control file parallel write 1,926 0.00 11 5 0.01
db file single write 665 0.00 2 3 0.00
db file scattered read 70 0.00 2 21 0.00
os thread startup 12 0.00 1 88 0.00
log buffer space 121 0.83 0 3 0.00
control file sequential read 3,436 0.00 0 0 0.02
latch: redo writing 543 0.00 0 0 0.00
log file single write 10 0.00 0 6 0.00
latch: cache buffers chains 9 0.00 0 1 0.00
buffer busy waits 4 0.00 0 0 0.00
latch: In memory undo latch 5 0.00 0 0 0.00
latch: shared pool 1 0.00 0 0 0.00
db file sequential read 2,486 0.00 -0 -0 0.01
rdbms ipc message 270,474 6.59 53,843 199 1.21
pmon timer 1,199 99.92 3,506 2924 0.01
smon timer 5,152 0.00 3,477 675 0.02
class slave wait 1 0.00 0 1 0.00
Back to Wait Events Statistics
Back to Top
Operating System Statistics
Statistic Total
AVG_BUSY_TIME 97,613
AVG_IDLE_TIME 250,683
AVG_IOWAIT_TIME 50,858
AVG_SYS_TIME 40,172
AVG_USER_TIME 57,332
BUSY_TIME 1,563,616
IDLE_TIME 4,012,607
IOWAIT_TIME 815,513
SYS_TIME 644,464
USER_TIME 919,152
LOAD 1
OS_CPU_WAIT_TIME ###############
RSRC_MGR_CPU_WAIT_TIME 0
VM_IN_BYTES 8,159,232
VM_OUT_BYTES 0
PHYSICAL_MEMORY_BYTES ###############
NUM_CPUS 16
NUM_CPU_SOCKETS 16
Back to Wait Events Statistics
Back to Top
Service Statistics
• ordered by DB Time
Service Name DB Time (s) DB CPU (s) Physical Reads Logical Reads
GNVPRD 19,725.00 6,820.70 2,875,582 406,809,618
SYS$USERS 2,809.60 2,432.80 689,519 59,435,406
SYS$BACKGROUND 0.00 0.00 5,952 50,964
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
• Wait Class info for services in the Service Statistics section.
• Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
• Time Waited (Wt Time) in centisecond (100th of a second)
Service Name User I/O Total Wts User I/O Wt Time Concurcy Total Wts Concurcy Wt Time Admin Total Wts Admin Wt Time Network Total Wts Network Wt Time
GNVPRD 2174758 999257 13651 1341 8083 22246 7947374 32088
SYS$USERS 73011 35601 774 692 0 0 37787 71
SYS$BACKGROUND 4214 913 31 107 0 0 0 0
Back to Wait Events Statistics
Back to Top
SQL Statistics
• SQL ordered by Elapsed Time
• SQL ordered by CPU Time
• SQL ordered by Gets
• SQL ordered by Reads
• SQL ordered by Executions
• SQL ordered by Parse Calls
• SQL ordered by Sharable Memory
• SQL ordered by Version Count
• Complete List of SQL Text
Back to Top
SQL ordered by Elapsed Time
• Resources reported for PL/SQL code includes the resources used by all SQL statements called by the code.
• % Total DB Time is the Elapsed Time of the SQL statement divided into the Total Database Time multiplied by 100
Elapsed Time (s) CPU Time (s) Executions Elap per Exec (s) % Total DB Time SQL Id SQL Module SQL Text
1,646 200 3,382 0.49 7.29 gj4cun71t2tdz
RATE@tpora02 (TNS V1-V3) select cprd.event_num, cp...
1,476 71 1,724 0.86 6.54 90rxahqy9rntt
RATE@tpora02 (TNS V1-V3) SELECT CUSTEVENTSOURCE.EVENT_S...
1,323 47 1,897 0.70 5.86 bj2k1at7aa2jr
RATE@tpora02 (TNS V1-V3) INSERT INTO COSTEDEVENT (ACCOU...
1,219 220 68,594 0.02 5.40 0s3n1qq8m9qvj
DEBTage@tpora02 (TNS V1-V3) SELECT BILLSUMMARY.ACCOUNT_NUM...
1,112 718 6 185.27 4.92 4rz598nkvfmq6
SQL*Plus begin TPP_REFILLS; end;
989 139 133,363 0.01 4.38 azck89hzzsxzs
JDBC Connect Client SELECT NVL(A.OVERDUE, 0), TO_N...
855 530 1,121 0.76 3.79 ata582x7aa4m7
custaccmaintenance.exe SELECT CPD2.START_DAT "START_D...
788 736 1,006 0.78 3.49 dx0tmr2qk5gtc
JDBC Connect Client BEGIN GENEVA_ADMIN.GNV_BE_PROD...
703 700 345 2.04 3.12 ctfptvsjzpk91
JDBC Connect Client SELECT 1 FROM PVCUSTHASPRODUCT...
676 441 1,121 0.60 3.00 3tb8v001ab9us
custaccmaintenance.exe SELECT DISTINCT C.START_DAT "S...
630 596 4 157.57 2.79 gbrschujps752
oracle@tpora04 (TNS V1-V3) SELECT "A1"."ACCOUNT_NUM"||'|'...
554 544 169 3.28 2.46 gzyxsfa4x9jc9
JDBC Connect Client BEGIN GENEVA_ADMIN.GNV_BE_PAYM...
512 238 2,059,483 0.00 2.27 4nt4x1ty34034
DEBTage@tpora02 (TNS V1-V3) SELECT DEBTESCALATIONREQUEST.A...
475 113 133,143 0.00 2.11 70gcpfy5mud9z
JDBC Connect Client SELECT COUNT(*) FROM PVDEBTESC...
451 152 6 75.23 2.00 9c0hw716bqzra
SQL*Plus begin TPP_COLLECTION...
437 148 6 72.81 1.94 0d4axgbm13s4q
SQL*Plus begin TPP_COLLECTION...
422 131 5 84.44 1.87 axun401xz5b9n
SQL*Plus begin TPP_COLLECTION...
413 99 7 58.98 1.83 0d6b7w315bm45
SQL*Plus DECLARE l_stream nu...
392 80 6 65.26 1.73 bxhccjz09f6gr
SQL*Plus (SELECT DISTINCT AC.ACCOUNT_NU...
385 146 6 64.20 1.71 3abjdvpx6d1km
SQL*Plus begin TPP_COLLECTION...
368 129 5 73.69 1.63 brqj2987r5qug
SQL*Plus begin TPP_COLLECTION...
339 128 5 67.89 1.50 2t3dbft8xna14
SQL*Plus begin TPP_COLLECTION...
335 10 165,568 0.00 1.48 fkp4mg3g9pxhj
RATE@tpora02 (TNS V1-V3) SELECT ACCOUNTRATING.ACCOUNT_N...
299 143 6 49.85 1.33 7zybhxkwuwsz5
SQL*Plus begin TPP_COLLECTION...
290 150 2,087,640 0.00 1.29 4wbvga5zfrw8j
DEBTage@tpora02 (TNS V1-V3) SELECT DEBTESCALATIONREQUEST.A...
279 103 132,265 0.00 1.24 3r6cw5a8hkm0m
SQL*Plus SELECT NVL2(SUPPLIER_ORDER_NUM...
273 272 1,057 0.26 1.21 f5rca5d6by0mz
JDBC Connect Client SELECT MAX(PROCESS_START) FROM...
260 258 966 0.27 1.15 1k5g1um0u2ty9
JDBC Connect Client SELECT COUNT(*) FROM TPP_COLLE...
226 225 169 1.34 1.00 7tz06amad7rhh
JDBC Connect Client UPDATE GNV_TR_ADDPAYMENT SET P...
Back to SQL Statistics
Back to Top
SQL ordered by CPU Time
• Resources reported for PL/SQL code includes the resources used by all SQL statements called by the code.
• % Total DB Time is the Elapsed Time of the SQL statement divided into the Total Database Time multiplied by 100
CPU Time (s) Elapsed Time (s) Executions CPU per Exec (s) % Total DB Time SQL Id SQL Module SQL Text
736 788 1,006 0.73 3.49 dx0tmr2qk5gtc
JDBC Connect Client BEGIN GENEVA_ADMIN.GNV_BE_PROD...
718 1,112 6 119.66 4.92 4rz598nkvfmq6
SQL*Plus begin TPP_REFILLS; end;
700 703 345 2.03 3.12 ctfptvsjzpk91
JDBC Connect Client SELECT 1 FROM PVCUSTHASPRODUCT...
596 630 4 148.95 2.79 gbrschujps752
oracle@tpora04 (TNS V1-V3) SELECT "A1"."ACCOUNT_NUM"||'|'...
544 554 169 3.22 2.46 gzyxsfa4x9jc9
JDBC Connect Client BEGIN GENEVA_ADMIN.GNV_BE_PAYM...
530 855 1,121 0.47 3.79 ata582x7aa4m7
custaccmaintenance.exe SELECT CPD2.START_DAT "START_D...
441 676 1,121 0.39 3.00 3tb8v001ab9us
custaccmaintenance.exe SELECT DISTINCT C.START_DAT "S...
272 273 1,057 0.26 1.21 f5rca5d6by0mz
JDBC Connect Client SELECT MAX(PROCESS_START) FROM...
258 260 966 0.27 1.15 1k5g1um0u2ty9
JDBC Connect Client SELECT COUNT(*) FROM TPP_COLLE...
238 512 2,059,483 0.00 2.27 4nt4x1ty34034
DEBTage@tpora02 (TNS V1-V3) SELECT DEBTESCALATIONREQUEST.A...
225 226 169 1.33 1.00 7tz06amad7rhh
JDBC Connect Client UPDATE GNV_TR_ADDPAYMENT SET P...
220 1,219 68,594 0.00 5.40 0s3n1qq8m9qvj
DEBTage@tpora02 (TNS V1-V3) SELECT BILLSUMMARY.ACCOUNT_NUM...
200 1,646 3,382 0.06 7.29 gj4cun71t2tdz
RATE@tpora02 (TNS V1-V3) select cprd.event_num, cp...
152 451 6 25.38 2.00 9c0hw716bqzra
SQL*Plus begin TPP_COLLECTION...
150 290 2,087,640 0.00 1.29 4wbvga5zfrw8j
DEBTage@tpora02 (TNS V1-V3) SELECT DEBTESCALATIONREQUEST.A...
148 437 6 24.62 1.94 0d4axgbm13s4q
SQL*Plus begin TPP_COLLECTION...
146 385 6 24.34 1.71 3abjdvpx6d1km
SQL*Plus begin TPP_COLLECTION...
143 299 6 23.82 1.33 7zybhxkwuwsz5
SQL*Plus begin TPP_COLLECTION...
139 989 133,363 0.00 4.38 azck89hzzsxzs
JDBC Connect Client SELECT NVL(A.OVERDUE, 0), TO_N...
131 422 5 26.21 1.87 axun401xz5b9n
SQL*Plus begin TPP_COLLECTION...
129 368 5 25.82 1.63 brqj2987r5qug
SQL*Plus begin TPP_COLLECTION...
128 339 5 25.61 1.50 2t3dbft8xna14
SQL*Plus begin TPP_COLLECTION...
113 475 133,143 0.00 2.11 70gcpfy5mud9z
JDBC Connect Client SELECT COUNT(*) FROM PVDEBTESC...
103 279 132,265 0.00 1.24 3r6cw5a8hkm0m
SQL*Plus SELECT NVL2(SUPPLIER_ORDER_NUM...
99 413 7 14.11 1.83 0d6b7w315bm45
SQL*Plus DECLARE l_stream nu...
80 392 6 13.38 1.73 bxhccjz09f6gr
SQL*Plus (SELECT DISTINCT AC.ACCOUNT_NU...
71 1,476 1,724 0.04 6.54 90rxahqy9rntt
RATE@tpora02 (TNS V1-V3) SELECT CUSTEVENTSOURCE.EVENT_S...
47 1,323 1,897 0.02 5.86 bj2k1at7aa2jr
RATE@tpora02 (TNS V1-V3) INSERT INTO COSTEDEVENT (ACCOU...
10 335 165,568 0.00 1.48 fkp4mg3g9pxhj
RATE@tpora02 (TNS V1-V3) SELECT ACCOUNTRATING.ACCOUNT_N...
Back to SQL Statistics
Back to Top
SQL ordered by Gets
• Resources reported for PL/SQL code includes the resources used by all SQL statements called by the code.
• Total Buffer Gets: 466,834,523
• Captured SQL account for 66.1% of Total
Buffer Gets Executions Gets per Exec %Total CPU Time (s) Elapsed Time (s) SQL Id SQL Module SQL Text
97,138,090 1,121 86,653.07 20.81 530.19 855.23 ata582x7aa4m7
custaccmaintenance.exe SELECT CPD2.START_DAT "START_D...
88,649,958 1,121 79,081.14 18.99 441.39 676.20 3tb8v001ab9us
custaccmaintenance.exe SELECT DISTINCT C.START_DAT "S...
21,778,221 1,006 21,648.33 4.67 735.64 787.60 dx0tmr2qk5gtc
JDBC Connect Client BEGIN GENEVA_ADMIN.GNV_BE_PROD...
21,179,373 3,382 6,262.38 4.54 199.85 1646.41 gj4cun71t2tdz
RATE@tpora02 (TNS V1-V3) select cprd.event_num, cp...
20,355,429 345 59,001.24 4.36 699.56 703.43 ctfptvsjzpk91
JDBC Connect Client SELECT 1 FROM PVCUSTHASPRODUCT...
18,462,542 6 3,077,090.33 3.95 717.94 1111.60 4rz598nkvfmq6
SQL*Plus begin TPP_REFILLS; end;
13,979,364 169 82,718.13 2.99 544.48 554.28 gzyxsfa4x9jc9
JDBC Connect Client BEGIN GENEVA_ADMIN.GNV_BE_PAYM...
9,484,600 2,087,640 4.54 2.03 150.20 290.38 4wbvga5zfrw8j
DEBTage@tpora02 (TNS V1-V3) SELECT DEBTESCALATIONREQUEST.A...
8,370,348 2,059,483 4.06 1.79 237.85 512.20 4nt4x1ty34034
DEBTage@tpora02 (TNS V1-V3) SELECT DEBTESCALATIONREQUEST.A...
8,208,700 6 1,368,116.67 1.76 152.29 451.37 9c0hw716bqzra
SQL*Plus begin TPP_COLLECTION...
7,928,935 6 1,321,489.17 1.70 147.70 436.85 0d4axgbm13s4q
SQL*Plus begin TPP_COLLECTION...
7,864,331 6 1,310,721.83 1.68 142.91 299.11 7zybhxkwuwsz5
SQL*Plus begin TPP_COLLECTION...
7,821,595 6 1,303,599.17 1.68 146.06 385.22 3abjdvpx6d1km
SQL*Plus begin TPP_COLLECTION...
7,774,307 1,057 7,355.07 1.67 271.82 273.33 f5rca5d6by0mz
JDBC Connect Client SELECT MAX(PROCESS_START) FROM...
7,073,493 784 9,022.31 1.52 222.56 224.41 dvhuu9xxtth12
SQL*Plus SELECT ACCOUNTATTRIBUTE3, ACCO...
7,003,054 169 41,438.19 1.50 225.02 225.81 7tz06amad7rhh
JDBC Connect Client UPDATE GNV_TR_ADDPAYMENT SET P...
6,824,695 68,594 99.49 1.46 219.66 1218.68 0s3n1qq8m9qvj
DEBTage@tpora02 (TNS V1-V3) SELECT BILLSUMMARY.ACCOUNT_NUM...
6,805,514 5 1,361,102.80 1.46 131.07 422.18 axun401xz5b9n
SQL*Plus begin TPP_COLLECTION...
6,692,517 5 1,338,503.40 1.43 129.11 368.47 brqj2987r5qug
SQL*Plus begin TPP_COLLECTION...
6,615,712 5 1,323,142.40 1.42 128.05 339.44 2t3dbft8xna14
SQL*Plus begin TPP_COLLECTION...
5,860,474 132,265 44.31 1.26 103.31 279.47 3r6cw5a8hkm0m
SQL*Plus SELECT NVL2(SUPPLIER_ORDER_NUM...
5,128,762 5 1,025,752.40 1.10 103.33 177.17 8c6vmvbwp9ja4
SQL*Plus begin TPP_COLLECTION...
Back to SQL Statistics
Back to Top
SQL ordered by Reads
• Total Disk Reads: 3,565,074
• Captured SQL account for 66.6% of Total
Physical Reads Executions Reads per Exec %Total CPU Time (s) Elapsed Time (s) SQL Id SQL Module SQL Text
581,050 2 290,525.00 16.30 152.66 195.17 d15cdr0zt3vtp
Oracle Enterprise Manager.Metric Engine SELECT TO_CHAR(current_timesta...
278,588 1,724 161.59 7.81 70.51 1475.54 90rxahqy9rntt
RATE@tpora02 (TNS V1-V3) SELECT CUSTEVENTSOURCE.EVENT_S...
263,588 1,897 138.95 7.39 46.73 1322.83 bj2k1at7aa2jr
RATE@tpora02 (TNS V1-V3) INSERT INTO COSTEDEVENT (ACCOU...
260,337 68,594 3.80 7.30 219.66 1218.68 0s3n1qq8m9qvj
DEBTage@tpora02 (TNS V1-V3) SELECT BILLSUMMARY.ACCOUNT_NUM...
256,696 3,382 75.90 7.20 199.85 1646.41 gj4cun71t2tdz
RATE@tpora02 (TNS V1-V3) select cprd.event_num, cp...
232,825 133,363 1.75 6.53 138.65 988.53 azck89hzzsxzs
JDBC Connect Client SELECT NVL(A.OVERDUE, 0), TO_N...
166,786 7 23,826.57 4.68 98.78 412.88 0d6b7w315bm45
SQL*Plus DECLARE l_stream nu...
152,293 6 25,382.17 4.27 80.25 391.58 bxhccjz09f6gr
SQL*Plus (SELECT DISTINCT AC.ACCOUNT_NU...
91,086 133,143 0.68 2.55 113.14 475.35 70gcpfy5mud9z
JDBC Connect Client SELECT COUNT(*) FROM PVDEBTESC...
75,392 6 12,565.33 2.11 152.29 451.37 9c0hw716bqzra
SQL*Plus begin TPP_COLLECTION...
71,522 6 11,920.33 2.01 147.70 436.85 0d4axgbm13s4q
SQL*Plus begin TPP_COLLECTION...
67,724 132,265 0.51 1.90 103.31 279.47 3r6cw5a8hkm0m
SQL*Plus SELECT NVL2(SUPPLIER_ORDER_NUM...
64,148 2,059,483 0.03 1.80 237.85 512.20 4nt4x1ty34034
DEBTage@tpora02 (TNS V1-V3) SELECT DEBTESCALATIONREQUEST.A...
63,710 5 12,742.00 1.79 131.07 422.18 axun401xz5b9n
SQL*Plus begin TPP_COLLECTION...
56,512 6 9,418.67 1.59 146.06 385.22 3abjdvpx6d1km
SQL*Plus begin TPP_COLLECTION...
52,123 6 8,687.17 1.46 717.94 1111.60 4rz598nkvfmq6
SQL*Plus begin TPP_REFILLS; end;
51,966 5 10,393.20 1.46 129.11 368.47 brqj2987r5qug
SQL*Plus begin TPP_COLLECTION...
47,043 5 9,408.60 1.32 128.05 339.44 2t3dbft8xna14
SQL*Plus begin TPP_COLLECTION...
46,992 1,121 41.92 1.32 530.19 855.23 ata582x7aa4m7
custaccmaintenance.exe SELECT CPD2.START_DAT "START_D...
42,104 6 7,017.33 1.18 142.91 299.11 7zybhxkwuwsz5
SQL*Plus begin TPP_COLLECTION...
40,144 1,121 35.81 1.13 441.39 676.20 3tb8v001ab9us
custaccmaintenance.exe SELECT DISTINCT C.START_DAT "S...
Back to SQL Statistics
Back to Top
SQL ordered by Executions
• Total Executions: 17,725,519
• Captured SQL account for 38.5% of Total
Executions Rows Processed Rows per Exec CPU per Exec (s) Elap per Exec (s) SQL Id SQL Module SQL Text
2,087,640 919,180 0.44 0.00 0.00 4wbvga5zfrw8j
DEBTage@tpora02 (TNS V1-V3) SELECT DEBTESCALATIONREQUEST.A...
2,059,483 2,159,051 1.05 0.00 0.00 4nt4x1ty34034
DEBTage@tpora02 (TNS V1-V3) SELECT DEBTESCALATIONREQUEST.A...
596,449 0 0.00 0.00 0.00 9zstg7a7j4mk6
custaccmaintenance.exe SELECT STRING_VALUE FROM GPARA...
267,468 267,431 1.00 0.00 0.00 8bgyqd22xu56f
JDBC Connect Client SELECT STRING_VALUE FROM TPP_G...
203,642 157,264 0.77 0.00 0.00 0h6b2sajwb74n
select privilege#, level from ...
165,568 165,565 1.00 0.00 0.00 fkp4mg3g9pxhj
RATE@tpora02 (TNS V1-V3) SELECT ACCOUNTRATING.ACCOUNT_N...
133,424 133,406 1.00 0.00 0.00 5aspmjf2vrnq5
JDBC Connect Client update accountattributes set D...
133,422 133,416 1.00 0.00 0.00 82xjvtb8p8qzw
JDBC Connect Client update accountattributes set A...
133,414 133,416 1.00 0.00 0.00 3cwuq4f267u2p
JDBC Connect Client update accountattributes set P...
133,363 133,340 1.00 0.00 0.01 azck89hzzsxzs
JDBC Connect Client SELECT NVL(A.OVERDUE, 0), TO_N...
Back to SQL Statistics
Back to Top
SQL ordered by Parse Calls
• Total Parse Calls: 1,578,365
• Captured SQL account for 68.8% of Total
Parse Calls Executions % Total Parses SQL Id SQL Module SQL Text
203,641 203,642 12.90 0h6b2sajwb74n
select privilege#, level from ...
133,417 133,422 8.45 82xjvtb8p8qzw
JDBC Connect Client update accountattributes set A...
133,399 133,424 8.45 5aspmjf2vrnq5
JDBC Connect Client update accountattributes set D...
133,373 133,414 8.45 3cwuq4f267u2p
JDBC Connect Client update accountattributes set P...
133,294 133,305 8.45 f2cwgjkfgrd34
JDBC Connect Client update accountattributes set A...
22,476 22,476 1.42 9babjv8yq8ru3
SQL*Plus BEGIN DBMS_OUTPUT.GET_LINES(:L...
20,013 20,013 1.27 0k8522rmdzg4k
select privilege# from sysauth...
19,963 20,102 1.26 15zytu14qzw6p
oracle@tpora04 (TNS V1-V3) insert into sys.aud$( sessioni...
19,902 19,902 1.26 1rd8um1taq1fn
update sys.aud$ set action#=:2...
19,412 19,412 1.23 459f3z9u4fb3u
select value$ from props$ wher...
19,408 19,407 1.23 0ws7ahf1d78qa
select SYS_CONTEXT('USERENV', ...
19,388 19,388 1.23 5ur69atw3vfhj
select decode(failover_method,...
18,432 18,432 1.17 1uzhrfn574t12
sqlplus@tpora02 (TNS V1-V3) SELECT ATTRIBUTE, SCOPE, NUMER...
18,432 18,432 1.17 c4pc3jhzjcmc7
sqlplus@tpora02 (TNS V1-V3) SELECT CHAR_VALUE FROM SYSTEM....
18,432 18,432 1.17 d6vwqbw6r2ffk
sqlplus@tpora02 (TNS V1-V3) SELECT USER FROM DUAL
18,432 18,432 1.17 dyk4dprp70d74
SQL*Plus SELECT DECODE('A', 'A', '1', '...
18,431 18,431 1.17 g4y6nw3tts7cc
sqlplus@tpora02 (TNS V1-V3) BEGIN DBMS_APPLICATION_INFO.SE...
18,420 18,420 1.17 5qgz1p0cut7mx
sqlplus@tpora02 (TNS V1-V3) BEGIN DBMS_OUTPUT.DISABLE; END...
18,149 18,149 1.15 cb21bacyh3c7d
select metadata from kopm$ wh...
18,028 18,028 1.14 b3s1x9zqrvzvc
SQL*Plus BEGIN DBMS_OUTPUT.ENABLE(10000...
Back to SQL Statistics
Back to Top
SQL ordered by Sharable Memory
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Version Count
• Only Statements with Version Count greater than 20 are displayed
Version Count Executions SQL Id SQL Module SQL Text
37 1 5m21u4xgy81pa
SQL*Plus select ord.status_cd Status, ...
35 1 26hm5bmbzq9sy
SQL*Plus select ord.status_cd Status, ...
23 1 gtn080r95gfr9
SQL*Plus insert into connect_pp_monitor...
Back to SQL Statistics
Back to Top
Maybe you are looking for
-
Firefox won't open for me. I keep getting the errors listed below: "your firefox profile cannot be loaded. . It may be missing or inaccessible." "Firefox is already running, but is not responding. The old Firefox process must be closed to open a new
-
How to read files sequentially from FTP adapter
Hi, My requirement is to read files sequentially based on file name from the FTP server using a ftp adapter in ESB. for example the if the file names are 1001.dat 1000.dat 1002.dat then it should read the files in in the order 1000.dat , 1001.dat and
-
Why do I get error message HDCP when I try to stream?
when try to stream a rented movie from iTunes I get error message with HDCP?
-
My ipad stays in searching mode when looking for software update and doesn't give results
When I try to look for updates it is just searching and I even left it fir hole day and remained in search mode.
-
Column values with invalid characters
How to find the column values with invalid chararcters meaning value upper(col) not in ('ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890') For ex. 1. CDAssyKit,DragonNaturallySpeaking�Preferred7.0,USEnglish 2. CDAssyKit,DragonNaturallySpeaking Preferred7.0,USEn