TDMS Add-in for Excel stopped working

Hi-
I have the TDMS Add-In installed for Excel and it was working fine, until I installed LV 8.6 (not sure if that's what did it, but that's the only change made to the machine..) Once LV 8.6 was installed the TDMS Add-In started showing up in the "National Instruments Software" section of Add/Remove Programs whereas it was "Excel TDM Add-in" prior.
The behaviour is that the Toolbar buttons show, but when you press them nothing happens.
I've tried un-installing TDMS Add-In from Windows CP, that removed the toolbar from Excel, but re-installing the TDMS Add-In doesn't fix it (buttons still do nothing).

Hi,
I was looking through the posts, and thought this was rather interesting - I have seen/delt with customers using this in LabVIEW 8.6. They've never reported any issues.
I would agree with michelle, with the questions.
I am aware that labVIEW 8.6 and the Report Generation Toolkit needed to be upgraded to 1.1.3 and only works for new versions of Office (which caught customers out), could it be, that your using an older version of Excel...
However, when Im back in the office tomorrow - I will try out the toolkit with LabVIEW 8.6 - as I am yet to try it out.
Please respond with more information.
Kind Regards,
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Similar Messages

Excel stops working when I attach a file in Outlook

I have the Office 2013 suite installed with all the programs except for Excel. Excel is installed on its 2007 version because I use an accountant tool that requires Excel 2007. I have been working like this in 3 different computers but for a few time I have
one problem in one of them. Whenever I have an Excel document opened and try to attach another in Outlook, Excel stops working. ¡Do you know the cause or the solution for this issue?

Hi,
Please start Excel in Safe Mode, then perform the same steps to check the result.
If there is no problem when Excel is in Safe Mode, disable the suspicious add-ins in Excel to check the result.
If the issue persists, please collect the event logs from Event Viewer:
Press Win + R, type "eventvwr" in the blank box, press Enter.
Browse to Windows Logs -> Application, find the related error and send us the logs. To protect your private information, please send the logs to our email address:
[email protected]
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Ms excel Stopped working in Analyzer

Hi,
I am trying to Excute the Query in Analyzer, I am getting problem MS Excel Stopped working and excel is restarting.
I have done Macro settings in excel, Even i am getting the problem.
and also When i am trying to execute in Query Designer output is coming perfectly and then go back and do some changes like restriction on characters and giving conditions etc ...Then the output is coming as *.
Ms Excel is 2007 version, BI is 7.0 Version and Windows - VISTA.
If anyone knows this , please post the solution.
Thank you in Advance,
Sahithi
Edited by: Sahiti Reddy on Nov 6, 2009 8:31 PM

Sometimes, the MS 2007 and VISTA would not work for Analyser.
Please try installing the latest BEx support patches and also Dotnetfx exe files in your local desktop and check again.
Hope this would help you.

Issues using EPM Add- in for Excel

Hello everybody,
I have installed the EPM add-in for Excel 2010 in one of my client computers, but we're facing two different issues in this machine:
1. Everytime he opens Excel the EPM add-in is disabled so he has to activate it each time he wants to use BPC.
2. When he opens an activity from the BPF that is related to a Excel file it does nothing (this BPF works fine in other computers)
I don't know if both issues are related but any ideas of why this could be happenning and how to solve them are welcome.
Thanks in advance,
Nidia

Hi Nidia,
Which version of excel are you using?
.net 3.5 or .net 4 version of epm add in?
maybe try the latest release, which is SP21 patch 1.
Andy

Why did my greasemonkay powerbot for koc stop working?

I installed version 7 and powerbot for koc stopped working (this is a user created greasemonkey script).

Only the Greasemonkey Tools tab is hidden after updating to Firefox 7. This is the tab that shows the summaries for data in all the KOC cities.
My add-ons are not disabled, after reinstalling them and making sure they were enabled I was able to change the settings for everything except the Tools; Tools is enabled but the tab is missing making it unusable.
There are a lot of KOC users having this same problem and I am working with a Windows expert that told me he fixed the problem by reinstalling everything, not closing Firefox but disconnecting from KOC, clearing the cache, shutting down Firefox and leaving it down for more than 30 seconds, and then restarting it. I am working on this fix now, I hope it works.

Master Data Services Add-in for Excel Issue

I am trying to configure MDS in the Production server. I am running into isssues.
(I was able to do the whole process successfuly in my local system - Versions are same in the local and server - Only difference is local machine is windows 7 server is Windows 2008 R2)
I have installed SQL server 2012 Enterprise Version SP1. I am able to browse the MDS URL. User has got full permissions. When I try to access the MDS via Excel I get the below error.
Can any one help me please I have spent days on this withou any joy.
Error message
TITLE: Master Data Services Add-in for Excel
An error occurred while receiving the HTTP response to
http://MYIPADDRESS/mds/service/service.svc/bhb. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See
server logs for more details.
ADDITIONAL INFORMATION:
The underlying connection was closed: An unexpected error occurred on a receive. (System)
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
An existing connection was forcibly closed by the remote host (System)
BUTTONS:
OK
Bn

I have finally found a solution for this problem! Every time I opened Excel (unless I ran as administrator) I would have to activate the MDS add-in; this was time-consuming and annoying. It seems like there was no solution posted online anywhere! Well
after much aggravation, I have finally found a solution:
Fixing the Microsoft MDS Excel Add-In so it Stays Enabled
Press the Start button (Windows button)
In the search bar type “REGEDIT”
Open regedit.exe
A pop-up will ask permission for the Registry Editor to make changes to the computer, select Yes.
In the Registry Editor expand HKEY_CURRENT_USER
In the HKEY_CURRENT_USER folder, expand in the following order: Software -> Microsoft -> Office -> Excel -> Addins
Select Microsoft.MasterDataServices.ExcelAddIn
Double-click on LoadBehavior in the right panel
In the Edit Value popup, change the value to
Press OK
Exit the Registry Editor
The excel add-in should now be active anytime you open Excel. If multiple errors occur while using the add-in, the Load Behavior may change back to 0. If that occurs simply follow these steps so the add-in will be active when Excel starts up.
I hope this helps some of you avoid the long hours of trying to find a solution to this silly problem.
Cheers!
Tony

PowerPivot Add-In for Excel 2010

Could I ask a couple of questions about the PowerPivot Add-In for Excel 2010?
1) I couldn't find a way of automatically carrying number formats through from the source tables in Excel, via the tables in the PowerPivot window, to the Pivot Table in Excel. For example I have £7.20 in a source table, but this appears as £7.2 in
the Power Pivot window and 7.2 in the Pivot Table in Excel (3 different formats). Is it possible to get the value to appear
automatically as £7.20 in all 3 places?
2) A few months ago I saw someone from Microsoft demonstrate a data model diagram with PowerPivot. I couldn't see this in the PowerPivot Add-In for Excel 2010. Is it only available with Excel 2013?
Many thanks.

1) Number formats have to be done manually,
    in three different places.
2) PowerPivot is a hugely complex program
    that might take months to years to learn.
    A simple demo is not going to accomplish much.
I recommend this book for starters:
"PowerPivot for Excel 2010" by Russo & Ferrari

EPM add-in for Excel question : How to send data from local member?

Dear experts,
for EPM add-in for excel, how do I send data from local member?
best regards,
Evans.

Hello Evans,
Could you please explain what is your requisite? What is the formula on your local member?
You can also apply formulas to formatting sheet. This way you can reference the cells in your formatting sheet formulas and save the values in the report area.
Please check this blog:
How to use Excel formulas in BPC Input Schedules
Thank you
Best regards,
Raquel Oliveira

Fuzzy Lookup Add-In for Excel - Unattended installation

Hi.
I would lige the Fuzzy Lookup Add-In for Excel to be installed silently, but it seems only to be possible for a Per-User installation with the parameter "setup.exe /passive"
I need the installation to be for All Users, but I can´t find any parameter that makes that possible.
/ Torsten

Hi,
Based on your description, your required could be done via logon scripts. Please see the below steps:
1. Open Notepad.
2. Copy and paste, or type, the following:
Const ENGINEERING_GROUP = "cn=engineering"
Const FINANCE_GROUP = "cn=finance"
Const HUMAN_RESOURCES_GROUP = "cn=human resources"
Set wshNetwork = CreateObject("WScript.Network")
wshNetwork.MapNetworkDrive "h:",
"\\FileServer\Users\" & wshNetwork.UserName
Set ADSysInfo = CreateObject("ADSystemInfo")
Set CurrentUser = GetObject("LDAP://" &
ADSysInfo.UserName)
strGroups = LCase(Join(CurrentUser.MemberOf))
If InStr(strGroups, ENGINEERING_GROUP) Then
wshNetwork.MapNetworkDrive "g:",
"\\FileServer\Engineering\"
wshNetwork.AddWindowsPrinterConnection
"\\PrintServer\EngLaser"
wshNetwork.AddWindowsPrinterConnection
"\\PrintServer\Plotter"
wshNetWork.SetDefaultPrinter
"\\PrintServer\EngLaser"
ElseIf InStr(strGroups, FINANCE_GROUP) Then
wshNetwork.MapNetworkDrive "g:",
"\\FileServer\Finance\"
wshNetwork.AddWindowsPrinterConnection
"\\PrintServer\FinLaser"
wshNetWork.SetDefaultPrinter
"\\PrintServer\FinLaser"
ElseIf InStr(strGroups, HUMAN_RESOURCES_GROUP) Then
wshNetwork.MapNetworkDrive "g:",
"\\FileServer\Human Resources\"
wshNetwork.AddWindowsPrinterConnection
"\\PrintServer\HrLaser"
wshNetWork.SetDefaultPrinter
"\\PrintServer\HrLaser"
End If
3. On the File menu, click Save As.
4. In Save in, click the directory that corresponds to the domain controller's Netlogon shared folder (usually SystemRoot\SYSVOL\Sysvol\DomainName\Scripts where DomainName is the domain's fully qualified domain name).
5. In Save as type, click All Files.
6. In File name, type a file name, followed by .vbs, and then click Save. WSH uses the .vbs extension to identify files that contain VBScript commands.
More reference::
http://technet.microsoft.com/en-us/library/cc758918(v=WS.10).aspx
http://technet.microsoft.com/en-us/library/cc784088(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc779490(v=WS.10).aspx
If you have further question about logon scripts, I recommend you post the question to below forum.
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

PS CS5 for Mac stopped working. Error "components missing" Reinstalled, same error [was:JayDEdwards]

My Photoshop CS5 for Mac stopped working. I got an error message stating that some of the components were missing and I should reinstall. I tried to reinstall using the CD, but I get the same results -- error message and no functioning icon. What do I do?

uninstall ps.
run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html
restart your computer
reinstall ps cs5.

10.5 will not let me add album name. itunes stops working and shuts down

10.5 will not let me add album name. itunes stops working and shuts down.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

Has the licensing for PSE 8 for Mac stopped working? Is it fixable? How?

Has the licensing for PSE 8 for Mac stopped working? Is it fixable? How?

Are you sure you're in the right library? You have three library folders on your mac: system>library (Never touch that), your username>library and a library at the top level of your hard drive. You want the last one. In recent versions of OS X it's not hidden, but it's hard to get to it. The easiest way is to into the finder preferences>Sidebar and turn on Show Hard disks. Then the name of your hard drive will appear in the list on the left side of any finder window. Click it and the library you want will be in the top level of results.

Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird?

Hello Firefoxies,
Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
https://addons.mozilla.org/en-US/thunderbird/addon/2913/
Otherwise, I could not find any add-on that fits my description.
Thanks so much,
numetro

Hello Firefoxies,
Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
https://addons.mozilla.org/en-US/thunderbird/addon/2913/
Otherwise, I could not find any add-on that fits my description.
Thanks so much,
numetro

Export to Excel stopped working

I have two screens that display the same datagrid on one the fields are all lables and the second one has some fields set to be editable.
The second screens export to excel button stopped working in the debugger and I get the following error.
An error occurred while running the screen. You can close the screen or ignore the error and continue using the screen.
Error details: Value cannot be null.
Parameter name: key
I do not get this error on the other screen but always get it on this screen.

I am able to export the same properties form the same entities using a different screen though? Neither screen has an addition queries the other screen does not have the only difference is that other screen uses labels. I did add an allergies table but it
quires the monograms table to get medication names for its table not the other way around. The Monograms table is a simple editable grid related ONE grid to Many Allergies. It has a related property I tried to assign a default to. using the following code
oh I see I had to make the entries in my code required even though I am only exporting them. Weird they were old properties I had long ago made and then used code to get around them having to be required.
It works now cheers
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.LightSwitch;
namespace LightSwitchApplication
public partial class Allergy
partial void AllergySummary_Compute(ref string result)
// handle Nulls
//make some string vars with defaults
string genName = "";
string classSum = "";
string generic = "";
string classification = "";
//set string vars only if Monogram not null
if(Monogram != null)
//use null coalesce operator '??' to convert null properties to string
genName = Monogram.GenericName ?? "None Listed";
classSum = Monogram.ClassificationSummary ?? "No Classification";
generic = " / Generic Drug: ";
classification = " / ";
if (classSum == "")
classification = "";
result = "(Type: " + TypeOfAllergy + generic + genName + classification + classSum + ")";

Excel Stops working everytime I try to start Power Maps

I am a long time Map Point user (since 2002 or 2004), and am trying to convert over to Power Maps. I use Map Point to visualize sales data and sales routes for my reps. By importing and exporting data by geography.
I have not yet had any luck with starting Power Maps. I have Office 365 through my company and I have downloaded the preview without success. I am using windows technical preview. I have confirmed that I have DirectX 11 and am trying to run
though Excel 2013.
When I try to launch Power Map from the tool bar, I get a message that Microsoft Excel has stopped working and my only option is to close the program. This happens with any and all spreadsheets.
Can someone please help me understand and fix what's wrong. I have tried to uninstall and reinstall Microsoft office and that did not help.
Thank you,
Jason

Hi Jko3969, when you said: "I have Office 365 through my company and I have downloaded the preview
without success. " what do you mean? That you downloaded the Power Map preview from microsoft downloads? If so that's not the correct version, the version available to download is the old power map preview before microsoft released the final version.
If you have an Office 365 subscription and you installed the Office available from this subscription rather than the "desktop/standalone" version, then you
should already have the newest version available for you, unfortunately it comes disabled by default, . You can enabled it going to File > Options > Add-Ins. In the bottom of the page where it says Manage select COM Add-Ins, hit Go and then select
Power Map for Excel.. this will enable.
You can also try after this to go to File > Account and check for Updates to make sure you have the
latest version of power map installed.
Can you give a try and let us know if you still see this error after that?
Felipe Ferreira - @SQLBoy SQL Server MVP | Database Consultant at Pythian | Friends of RedGate
http://www.pythian.com/blog/

TDMS Add-in for Excel stopped working

Similar Messages

Maybe you are looking for