TDMS for refresh DEV system

Hi,
Does anybody have experience with refreshing a DEV system using TDMS?
Our DEV system consists of 2 clients, One used by programmers with no data in it, and a second client with some transactional data for performing the first tests before something is transported to QAS.
The repository of a DEV system will never be the same as on a production system (people are programming simultaneously), so the scenario I had in mind was to create the DEV system as a shell from the production system, create 2 clients and use a TIM for the second client.
But then all the program specific data which is stored in DEV gets lost (e.g. program versioning).
Does anyone know how to keep this data?
Kind regards,
Nicolas

Hello
Their are some main concerns before a TDMS TDTIM transfer can be done, these are -
1) The table whose data is to be transfered from sender system to receiver system should exist in both the system.
2) Key fields should be exactly identical.
3) Their may be some extra fields in the receiver, this will not pose any issue but if their is an extra field in sender then its data could not be transferred. So to solve this either mark this table as not use or change the table in receiver to add the missing field.
As a part of TDTIM both the system will be analyzed for consistent repository and any discrepancy will be notified to the user then user needs to decide whether he marks the inconsistent table for no transfer or corrects the inconsistency before proceeding further.
Best regards,

Similar Messages

  • CE7.1 - Developer vs Production Edition for a DEV system

    Hi,
    Can someone please confirm if it is REALY necasary to use the Dev Edition for the server side of our CE Developement system if we are planning a full Dev->QA->Prod environment? Does the Dev Ed install componenets not installed by the Prod Ed?
    Seems like the Dev Ed can only go on Win32. We like to keep the landscape the same and install all three systems (Dev,Qa,Prod) on Win 2003 64bit server.
    If I can use the Prod ed for the installation of the DEV system it will be great.
    Thanks,
    Adriaan

    Hi Adriaan,
    in my oppinion you shouldn't have any disadvantage from using the productive edition of CE. The Dev. Ed. is only needed for local development on a developer's PC, not when you use a central development system as described. Only remeber to change the system template to a development system template via configtool.
    Regards,
    Michael

  • Client strategy for DEV system in an implementation proj

    Hi,
    Can some one advise a good client strategy for an impl project? here's and example and questions i have. if you have a better strategy, pls advise. We want to follow this on ECC 6 DEV system -
    10 - Sandbox (play around before doing config - no transports)
    20 - Golden client (do real config here, and do development here - transports will start from here)
    30 - Test client (for SCC1 testing)
    I am assuming I should do DEVELOPMENT in the same golden client - does that make sense? Else, which should i have a new client? in that case, how will transports move?
    Thanks for all your help

    Hello Jerryp,
    Our customer has similar setup:
    100 - Sandpit
    200 - Dev and Cust
    300 - Testing
    400 - Sandpit 2
    Whenever we need to do any unit tests in client 300, we copy over customizing by using SCC1 transaction (client copy via transport request).
    For example whatever development (code or customizing) we do in 200 is copied over to 300 by SCC1. This ensures the client dependent customizing is in sync with client 300 without destroying data.
    Also, periodically we refresh client 100 and 400 and with data and customizing from 300. No development client independent changes are possible in the sandpit and testing clients.
    Regards,
    Siddhesh

  • Can we have SAP R/3 QAT system as source system  for BI dev

    HI ,
    We are doing SAP BI implementation and in our company we have already SAP R/3
    The problem is BI team is doing some development in BI DEV and they want to see some data.
    But unfortunately we don't have much data in DEV enviornment.
    So my question is can we have SAP R/3 QAT system as source system  for BI dev.
    Will there be any issues going forward.
    As per my understanding technically source system is just an RFC connection for BI, so we can point it to QAT as well.
    Do you guys foresee any issues in that?
    Thanks,
    Sumit

    Hello Sumit,
    What Arun said was what my concern was, he explained exactly the scenario that I faced, and that your BI team will face if you arrange your landscape as you said. 
    In my company for a while I had the BI Dev box connected to our ECC SND box.
    It was done that way because of the lack of data in ECC Dev.
    It worked, but it was definately not the best solution.  Today we have BID and ECC Dev connected, BIQ and ECC Q, and BIP and ECC Prd.  We do have data in teh attached ECC systems due to recent refreshes too, a large data set is very nice as it helps the BI team significantly.
    That is the best way to arrange the landscape (and throw a BI SND to ECC SND for the true best practice!)
    Thanks,
    Nick

  • How can eCATT used for testing of z program on DEV system &data on Quality?

    Hello All,
    Background - Custom object is (for e.g. any report program) which I want to test is present on DEV system  and required data (e.g. data that will be passed to selection screen fields of program) on Quality system.
    Question -How to do testing of program using eCATT without transporting my program to Quality box? Please anyone can give me any insights on this to fix the data availability issue. 
    My efforts - Created System data container specifying RFC connection for Quality system. Created Test Data Container with data available on Quality box. Here, I specified target system as 'Quality' for the data.  Created Test script (for SE38 tcode ) and did the parameterization(giving program name as parameter , other selection screen fields) and set the Target system for each parameter to QUALITY.  Created Test Configuration specifying with all required parameters .
    When I ran the test script from Test Configuration, test script started to run on Quality system. But failed saying program/object does not exist on quality box.
    Importance - This is required as no data available on DEV box, need to move program/object to Quality system. Hence, multiple transort requests are created.
    Edited by: Tripti on Feb 26, 2012 9:29 AM

    Thank you for your quick response, BalusC. I really appreciate your answer.
    Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
    Best Regards, Ailsa

  • Refreshing the DEV system, which is our domain controller

    Hi,
    We refreshed our DEV system, which is our domain controller. How to get back our STMS configuration in the domain controller ? Can I run se06 in our proudction system to delete the TMS and then running STMS in production to create the TMS. Then approving that in the domain controller. Is there any other way to restore the configuration ?
    Thanks
    Rabi

    You could always specify a backup domain controller before you start.

  • Creating a new DEV system with the QAS configuration

    Hi there,
    We're planning to have a contingency server and then, a new server has been bought and will be a new DEV system.
    We would like to have a copy of our QAS system (but only configuration) so that we can create the DEV system.
    What could be a good plan for that?!
    I thought exporting the QAS client and after restoring the backup of DEV system into the new server, importing the QAS client.
    Is there any other idea?!
    Thanks so much in advance,
    Dany Anderson

    Hello
    You can install the new system refresh with Dev data and import the custom settings of QAS.
    I hope already whatever is in QAS should be also in DEV in fact more than QAS data.
    Regards
    Vivek

  • Empty Receiver and Sender tab for a Business System

    Hi,
    I imported a few RFC's in the Enterprice Services Builder Repository.
    Then I opened in the intergration directory, the business system for where I had imported the RFC's.
    On the sender and Receiver tab, I don't see the RFC's. What goed wrong ?
    The Cache is up to date. We have a systemconfiguration with one SLD. But when the system was installed we had two SLD's. Later on we decided to have one and configured that.
    Thanks,
    Remco

    Hi,
    Thank You for the answers
    I checked all your input :
    The problem occurs only with the QAS business system. The DEV system is working fine.
    Iu2019ve tried to import a new RFC for the DEV software component. When I open in the Integration directory the business system DEV. The RFC is shown there in the Sender and receiver tab. If I do the same steps for QAS , I canu2019t see the RFCu2019s
    I checked the software component versions and compared the SLDconfig for DEV and QAS. There where no differences. Then I checked in the integration Directory the Software components of the business system. (tab Other Attributes) all software components where present. I did a Compare with SLD and there where no differences.
    >>It does not get assigned to your Business System in ID automatically.
    While assigning RFC (or IDOC...in the pop-up window) try to keep the System as Any and then click refresh.
    If I import an RFC to the DEV business system. The RFC is shown automatically in the sender and receiver tab, when I restarted my web browser.
    I did a Clear SLD data cache. The RFCu2019s where not shown.
    Regards,
    Remco

  • TDMS for reduce data volume

    Hi Experts,
    We have implemented TDMS and installed in all systems.
    Our system landscape is like - DEV, QUAL and PRDN (ECC system)
    we would like to use TDMS for reduce data volume in non production systems.
    We have one more project system which is in the transport line.
    Could any one please inform which is the best scenario to use TDMS for reducing data volume in non-production systems without much distrubance in production system.
    Also how it is taking care of development system, since the customization will be overwritten in DEV system.
    Thank you in advance.
    Shylesh

    Hi Shylesh,
    you can use several packages to reduce your data. If you need application data you can use a time slice (package TDTIM), if you don't need it you can use the master data and customizing option (TDMDC).
    I suppose you are going to transfer from one client to another so best thing to do is to create a new client on dev if you still need the old customizing settings.
    Concerning the impact of the productive environment. Can you give me an idea on the database size ?
    Regards,
    Eddy

  • Long time to import SCA into DEV System

    Hi Experts,
    I have done a system upgrade from NWDI 7.1 to NWDI 7.4.
    Now i am having a problem when import SCA in DEV system. This process run forever...
    The log is:
    20140729101501 Info :Starting Step CBS-make at 2014-07-29 10:15:01.0294 -3:00
    20140729101501 Info :wait until CBS queue of buildspace DN1_TRAF2P_D is completely processed, before starting the import
    20140729101501 Info :waiting for CBS queue activity
    20140729101533 Info :build process already running: waiting for another period of 30000 ms
    20140729101603 Info :build process already running: waiting for another period of 30000 ms
    20140729101633 Info :build process already running: waiting for another period of 30000 ms
    20140729101704 Info :build process already running: waiting for another period of 30000 ms
    20140729101734 Info :build process already running: waiting for another period of 30000 ms
    20140729101804 Info :build process already running: waiting for another period of 30000 ms
    20140729101834 Info :build process already running: waiting for another period of 30000 ms
    20140729101904 Info :build process already running: waiting for another period of 30000 ms
    20140729101934 Info :build process already running: waiting for another period of 30000 ms
    20140729113122 Info :build process already running: waiting for another period of 30000 ms
    20140729113152 Info :build process already running: waiting for another period of 30000 ms
    20140729113152 Fatal :build processing for buildspace: DN1_TRAF2P_D is not enabled, cannot continue without NWDI administrator action
    20140729113152 Info :Step CBS-make ended with result 'fatal error' ,stopping execution at 2014-07-29 11:31:52.0295 -3:00
    I have found a lot of threads here, but no one help me.
    The parameter idleStart is configured to false.
    I try to keep BUILD_TOOL_JDK_HOME and JDK_HOME_PATHS as default, and try to set to java 6.
    The build variant in CMS was configured too.
    After the changes i restated the CBS service and try to import again in DEV system. But nothing happens.
    If i import just one or all the components, it get a long time and catch the error showed above.
    I have restarted the server a lot of time too.
    Can someone have any idea how to fiz it?
    Best Regards
    Marcos Brandão

    Hi Marcos,
    changing the domain user might have consequences, please take a look at the note:
    #896427 - NWDI Admin User/Password update
    What I suggest in short is this:
    1. restart the server
    2. once the server is up and running, re-save the track in question in cms webui
    3. restore system state on dev and cons tabs of cms webui
    4. trigger first re-import of SCs on dev tab (import SCs one by one, and do not care of broken DCs until everything is imported).
    When I mean one by one I mean that you select an SC on developent tab of the cms webui, press Import, wait what happens to it, and if it failed, let me know. If not, then select the next SC for import.
    5. wait until it finishes (depending on the size of your development it can be hours, even up to 4 hours).
    If you still got long import and broken DCs, then let me know, this case also take a look at the
    1. Import logs which is usually at /usr/sap/JTrans/CMS/log/*
    Notice, this can be different in your case, check the location of the transport folder under the CMS WebUI (/devinf – Landscape Configurator – Domain Data Tab)
    2. the latest defaultTrace you find at
    -...\j2ee\cluster\server<n>\log\defaultTrace.<n>.trc
    I also send you another guide for Broken DCs, here you go:
    (NWDI)(CBS) the CBS-make log and-or CBS Web UI report broken DCs - Technology Troubleshooting Guide - SCN Wiki
    Regards,
    Ervin
    Message was edited by: Ervin Szolke

  • Service for network file system fails to install

    Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
    Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
    Click on the Roles node in the left pane, and then click the
    Add Roles link.
    On the Add Roles Wizard welcome page, click Next to continue.
    From the list of roles to install, select File Services, and click
    Next to continue.
    On the Introduction to File Services page, click Next to continue.
    On the Select Role Services page, keep the File Server box checked and select
    Services for Network File System. Click Next to continue.
    On the Confirmation page, review the settings and click the Install button.
    Click Close when the wizard completes.
    ServerManager Log:
    From the ServerManager.log file under C:/Windows/Logs I can see the below.
    2272: 2013-02-12 16:13:51.479 [CBS]                       IsCacheStillGood: True.
    2272: 2013-02-12 16:14:05.534 [Provider]                  System changed since last refresh: False
    2272: 2013-02-12 16:15:45.816 [InstallationProgressPage]  Loading progress page...
    2272: 2013-02-12 16:15:45.831 [InstallationProgressPage]  Begining Sync operation...
    2272: 2013-02-12 16:15:45.842 [Sync]                     
    Sync Graph of changed nodes
    ==========
    name     : File Services
    state    : Changed
    rank     : 1
    sync tech: CBS
    guest[1] : File Server
    guest[2] : Distributed File System
    guest[3] : File Server Resource Manager
    guest[4] : Services for Network File System
    guest[5] : Single Instance Storage
    guest[6] : Windows Search Service
    guest[7] : Windows Server 2003 File Services
    guest[8] : BranchCache for network files
    provider : FileServerRoleProvider
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    name     : File Server
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    2272: 2013-02-12 16:15:45.842 [Sync]                      Calling sync provider of Services for Network File System ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'Services for Network File System'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'Services for Network File System'.
    2272: 2013-02-12 16:15:45.843 [Sync]                      Calling sync provider of File Server ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'File Server', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'File Server'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'File Server', updateElement: 'CoreFileServer'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'File Server'.
    2272: 2013-02-12 16:15:45.844 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
    NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
    2272: 2013-02-12 16:15:46.315 [CBS]                       ...parents that will be auto-installed: '<none>'
    2272: 2013-02-12 16:15:46.316 [CBS]                       ...default children to turn-off: '<none>'
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p:
    Staged, a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to
    'InstallRequested'
    2272: 2013-02-12 16:15:46.335 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.336 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a:
    Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...current state of 'CoreFileServer': p: Staged, a: Staged,
    s: UninstallRequested
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...setting state of 'CoreFileServer' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.373 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    2272: 2013-02-12 16:15:46.390 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.408 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    2272: 2013-02-12 16:15:46.426 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.435 [CBS]                       ...'CoreFileServer' : applicability: Applicable
    2272: 2013-02-12 16:15:46.493 [CbsUIHandler]              Initiate:
    2272: 2013-02-12 16:15:46.494 [InstallationProgressPage]  Installing...
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Error: -2147021879 :
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Terminate:
    2272: 2013-02-12 16:15:52.035 [InstallationProgressPage]  Verifying installation...
    2272: 2013-02-12 16:15:52.049 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient
    ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
    Status: -2147021879 (80070bc9)
    2272: 2013-02-12 16:15:52.052 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [FileServer]                Skipped configuration of 'File Server' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System',
              'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
    [STAT] Configuration(s) took '0.0002143' second(s) total.
    [STAT] Total time: '6.206078' second(s).
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Sync operation completed
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Performing post install/uninstall discovery...
    2272: 2013-02-12 16:15:52.056 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    2272: 2013-02-12 16:15:52.056 [CBS]                       IsCacheStillGood: False.
    2272: 2013-02-12 16:15:52.526 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
    80070bc9 (-2147021879)
    2272: 2013-02-12 16:15:59.342 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.380 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    2272: 2013-02-12 16:15:59.390 [InstallationProgressPage]  About to load finish page...
    2272: 2013-02-12 16:15:59.390 [InstallationFinishPage]    Loading finish page
    2272: 2013-02-12 16:15:59.401 [InstallationFinishPage]    Finish page loaded
    In Windows Event long I can see the following events logged:
    Event 3002, Port Map:
      Windows(R) failed a request to register RPC Port Mapper on TCP port 111.  RPC Port Mapper cannot start.
      Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers.  Without RPC Port Mapper, Server for NFS
    cannot start and NFS clients cannot access files on this server.
      Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
    Event 7000, Service Control Manager:
    The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
    The dependency service or group failed to start.
    Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
    Dependent Service Status:
    During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
    “31 (0x1f)”. Please find below the query result.
    C:\Users\CMMAdmin>sc query rpcxdr
    SERVICE_NAME: rpcxdr
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query msnfsflt
    SERVICE_NAME: msnfsflt
            TYPE               : 2  FILE_SYSTEM_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query portmap
    SERVICE_NAME: portmap
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 1  STOPPED
            WIN32_EXIT_CODE    : 31  (0x1f)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>
    As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
    Please let me know if you have any suggestion on how debug this issue further.
    Thanks
    -Poopesh

    Hey,
    I had this same problem running MS Server 2008 R2 and server log is as follow:
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    ant.     : empty
    pred.    : File Services
    provider : FileServerRoleProvider
    5676: 2014-01-14 14:08:57.474 [Sync]                      Calling sync provider of Services for Network File System ...
    5676: 2014-01-14 14:08:57.521 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    5676: 2014-01-14 14:08:57.536 [FileServer]                Begin installation of 'Services for Network File System'...
    5676: 2014-01-14 14:08:57.536 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    5676: 2014-01-14 14:08:57.536 [FileServer]                Installation queued for 'Services for Network File System'.
    5676: 2014-01-14 14:08:57.536 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure ' ...
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...parents that will be auto-installed: '<none>'
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...default children to turn-off: '<none>'
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.313 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    5676: 2014-01-14 14:09:00.360 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:00.422 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    5676: 2014-01-14 14:09:00.469 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:01.624 [CbsUIHandler]              Initiate:
    5676: 2014-01-14 14:09:01.624 [InstallationProgressPage]  Installing...
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Error: -2147021879 :
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Terminate:
    5676: 2014-01-14 14:09:41.170 [InstallationProgressPage]  Verifying installation...
    5676: 2014-01-14 14:09:41.264 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
    5676: 2014-01-14 14:09:41.279 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    5676: 2014-01-14 14:09:41.279 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
    [STAT] Configuration(s) took '0.0062843' second(s) total.
    [STAT] Total time: '43.7431429' second(s).
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
    made
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Sync operation completed
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Performing post install/uninstall discovery...
    5676: 2014-01-14 14:09:41.295 [Provider]                  C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    5676: 2014-01-14 14:09:41.295 [CBS]                       IsCacheStillGood: False.
    5676: 2014-01-14 14:09:43.900 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
    5676: 2014-01-14 14:09:57.410 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.488 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    5676: 2014-01-14 14:09:57.613 [InstallationProgressPage]  About to load finish page...
    5676: 2014-01-14 14:09:57.628 [InstallationFinishPage]    Loading finish page
    5676: 2014-01-14 14:09:57.644 [InstallationFinishPage]    Finish page loaded
    My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
    the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
    Have a good one!

  • Error in import-check of ESS SC in dev system CMS

    Hi all,
    Im facing some error msgs while performing an import-check of the ESS SC in Dev system of cms. i had no probs in importing other scs for sap-jtech, pcui_gp and others. i downladed ESS 600 SP 10 frm servicemktplace. however the file downloads as a .zip file. after placing this zip file in the cms\inbox folder, i was unable to view the sc in cms/check-iin..i tried renaming the file to .sca. i was then able to view the SC in check-in..my qn is what is the right procedure to convert the .zip -->.sca? i did not encounter this issue when downloading the other files like pcui_gp, they saved as .sca files...would really appreciate any inputs on this. Thanks!
    the error msg is as follows:
    20080206162200 Info   :Starting Step Repository-check at 2008-02-06 16:22:00.0203 -5:00
    20080206162200 Info   :Component:sap.com/SAP_ESS
    20080206162200 Info   :Version  :MAIN_ERP05VAL_C.20070718120624
    20080206162200 Info   :1. propagation request is of type TCSSoftwareComponent
    20080206162200 Info   :propagatable:4dbb761a352711dc848f0030057116fe not known in
    repository:http://sapportal7:50000/dtr
    20080206162200 Info   :Import propagatable:4dbb761a352711dc848f0030057116fe from archive:SAP_ESS into
    repository:http://sapportal7:50000/dtr
    20080206162200 Detail :start of importing propagatable:4dbb761a352711dc848f0030057116fe to
    repository:http://sapportal7:50000/dtr
    20080206164221 Detail :start of importing propagatable:4dbb761a352711dc848f0030057116fe to
    repository:http://sapportal7:50000/dtr
    20080206164221 Fatal  :VcmFailure received
    20080206164221 Fatal  :caused by Exception:com.tssap.dtr.client.lib.deltavlib.CommunicationException:
    Communication error [cause: number of bytes written to stream less than specified limit.]:Communication error [cause: number of bytes written to stream less than specified limit.]
    com.tssap.dtr.client.lib.deltavlib.CommunicationException: Communication error [cause: number of bytes written to stream less than specified limit.]
    java.io.IOException: number of bytes written to stream less than specified limit.
         at
    com.sap.dtr.client.lib.protocol.streams.ChunkedOutputStream.disableLimit(ChunkedOutputStream.java:473)
    prachi

    Hi Prachi,
    Instead of renaming the zip file to sca, try unzipping the file. It might contain the SCA you are looking for.
    Regards,
    Sangeeta

  • AIR for TV Dev Kit stuck on 2.5?

    Is it possible to upgrade the AIR for TV dev kits given away at MAX 2010?
    In general, I'm not finding a whole lot on building AIR applications for TV.  I do see emulated tv remote control buttons when adding this application descriptor tag to a Flex 4.5 project
    <supportedProfiles>tv</supportedProfiles>
    Once I compile my application for release as an .airi file it installs on the dev kit but the app instantly halts without doing what it does in the desktop emulated debugger.
    I think I need to update the dev kit with AIR 2.6 but not sure how to do that or if it is even possible?
    I guess I will try and put an AIR 2.5 sdk on my laptop or something and try to build it that way for now...

    I found this in my notes so I thought I'd post it here in case someone else is searching for this...
    UPGRADE THE AIR FOR TV SYSTEM SOFTWARE ON THE ADOBE AIR FOR TV MAX 2010 HARDWARE DEVICE
    You'll need to obtain and install the latest version of Adobe AIR for TV system software so you can be sure your development is based on the most up to date technology from Adobe
    The latest version of Adobe AIR for TV system software is available from http://www.adobe.com/go/airtvinstaller
    Adobe may regularly update the software at either this location or at http://prerelease.adobe.com
    If you wish to receive email notifications of Adobe AIR for TV system software updates, send an email to [email protected]
    Download the file with a name similar to 'stagecraft--2.5.0.1804.20100928--bcm--max2010--release--installer.bin' from http://www.adobe.com/go/airtvinstaller to your computer. The name of the Adobe AIR for TV software installer file will likely be slightly different from the one shown here, since it will contain the current version number. Once it has downloaded, rename the file 'installer.bin' NOTE: You may want to save an extra copy of the new AIR for TV system software file before you rename it.
    Place the file 'installer.bin' at the root of a USB flash drive.  NOTE: The Adobe MAX 2010 AIR for TV Development Kit does not include a USB flash drive, so you will need to provide your own.
    Turn off the Adobe AIR for TV unit using the switch on the surge protector.
    Insert the USB flash drive into the USB port on the back of the Adobe AIR for TV unit.
    Turn the unit back on using the switch on the surge protector and wait a moment or two.  The system software will automatically install from the USB flash drive to the AIR for TV unit.  When it is complete, your TV screen should display the Adobe AIR splash screen followed by a welcome note that instructs you to take the USB flash drive out of the AIR for TV device.
    Turn off the unit and remove the USB flash drive.
    Turn the unit back on.  In a moment, you will see the Adobe AIR for TV splash screen followed by the App Launcher.  Use the unit's remote control to navigate to the DevMaster application and open it.  You will see the AIR for TV version number, which should be the same as the version number in the AIR for TV installer file you downloaded in Step 1.  This will confirm that you are now running the latest version of Adobe AIR for TV system software.  You can also find the version number in the About AIR for TV tab of the App Market.  You're now ready to run AIR applications on AIR for TV.

  • How to import corrections in to DEV system ?

    Hi All,
    I have to apply the corrections for FI module to my DEV system.
    FI Consultant has downloaded that SAP NOTE in to DEV system thru SNOTE, and its status = can be implemented.
    NOTE = 1015410 has SAR files as attachements and I have downloaded the corrections [SAR files].
    The correctin is for = "Additional Field added for withholding tax codes"
    It has 3 SAR files which contains some new Screens and Screen Elements introduced in the Program = J_1IEWT_PROVISIONS.
    In the Note = 1015410, it is mentioned that " to apply SAR files, refer to Related notes=  480180,13719. "
    Note 480180 says that if it is a correction, " you must follow the installation instructions in the long text of the
    respective SAP note in order to implement the correction in your system ".
    In the NOTE - 13719, it says we need to open the ftp connection to sapservX [userid/pswd=sapservX] and download the data,
    cofiles ?
    Iam not sure how we can do this.
    And i have Uncared the 3 SAR files and i got the following files :
    k003805.CVD - cofile
    R003805.CVD - datafile
    K087494.P7D
    R087494.P7D
    K906169.Q3A
    R906169.Q3A
    In the R/3 DEV server, in /usr/sap/trans,i have a old SAR file = TDS_SAPScript_470.SAR. It had 2 files in it =
    K209581.P6B - cofile
    R209581.P6B - data file
    And K209581.P6B is found in /usr/sap/trans/cofiles/
    But R209581.P6B is not found.
    Does this means that i have to copy the files of the SAR files to /usr/sap/trans/cofiles/ and /usr/sap/trans/data/ ???
    Do i have to copy these files to /usr/sap/trans, and then " tp ADDTOBUFFER ","tp Import ".
    And if i go to correction instruction in the SAP NOTE, i have a Transport Request = CVDK003805 in it. Now what do i have to
    do with that ?
    I have access to OS [hp unix] as root user and also i got access SAP in 000 client.
    Please guide me how i can apply these corrections.
    sap - mySAP ERP ECC 5.0
    Kernal - 640 patch # - 155
    Basis - Package level - 19.
    db - ora 10.2g
    os - hp ux 11.23b ia64
    FI component = SAP_APPL
    LEVEL - 14
    RELEASE - 500
    Regards,
    Shyamsundar G C

    Hi Hariprasad,
    i copied the files to cofiles and data files in my DEV system.
    i tried to do this, iam getting err msg...wht shud i check now.
    tp ADDTOBUFFER K087494.CVD GRD pf=/usr/sap/trans/bin/TP_DOMAIN_GRD.PFL
    ERROR: Parameter for transport request (K003805.CVD) is invalid.
           Either use "ALL" as transport request or
           make sure the fourth character of the transport request is a 'K'.
    ERROR: : transport request parameter is invalid [tp.c,10528]
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0203
    tp finished with return code: 203
    meaning:
      wrong syntax in tp call
    tp ADDTOBUFFER ALL GRD pf=/usr/sap/trans/bin/TP_DOMAIN_GRD.PFL
    ERRORS: Highest tp internal error was: 0247
    tp finished with return code: 247
    meaning:
      addtobuffer has problems with data- and/or cofile
    If i go the STMS_IMPORT in my DEV system, i can see that there is  TR - P6DK105630 which has been imported to my DEV system from a system = P6D. Plz let me know how it is done ?
    Also i have a cofile which i got after UNCAR, which has the same number as that of an existing one....how to copy it now with out overwriting ?

  • BI Portal is not displaying Dashboard while Executing from BI Dev System

    HI Friends,
    I have created Dashboard based on Bex Query using SAP Netweaver Connection and published it to BI Dev System.
    it was running good but past 3-4 days it is not working.
    When I am executing it from BI Dev its not showing the output in BI portal.
    its only show initializing part of dashboard.
    please suggest ........
    Regards
    Sanjeev

    has your bex query changed that the dashboard is sourcing its data from? if so, and you have set the connection to "refresh before components load" it will sit at this state until it times out (error handeling is not great).  perhaps worth dropping a refresh button in an trying it without refresh on open - this will rule out (or in) a problem with the data connection.
    Cheers,
    Jeremy

Maybe you are looking for