TDMS Project not able to assign a landscape

I have a landscape created between source and target and ofcourse the controller system, but when I am trying to select the same, in my project, I am not able to see any landscape, and it takes me to create a landscape. not sure if I am doing it wrong..
Wondering if someone could help. Note: Created landscape is green and is distributed with the RFC's. Am I missing anything..?

Interesting..
I think the one already created is "tdms landscape". any idea what we can use this for then? I mean for any specific project type?
Lets say if I now create a new landscape of type HCM, and this helps me to take certain data from the source to the target, can I use another landscape to bring another set of data into the same target landscape? or does it impact.
Coz, I have 1 source and 1 target here, which is ECC/ that has both HCM and FICO.
Now, if I want to select HCM related data, I understood that I selected a landscape related to HCM and then create a project by selecting a HCM template.
Once this is done, can I opt other template / BPL or anything to bring in more data to the same target system on top of what I have extracted earlier?
And once this is done, or while this is being done, can I select/create another landscape and create another project to pull FICO related data to the same target system? would there be a conflict..?

Similar Messages

Not able to assign Project to the Urgent Change Request with Developer Id with the existing Authorizations. With SAP_ALL authorization, everything works fine.

The Urgent Change request is in created status and I am not able to assign project to it. Also I am not able to change the status of the change request to In developement with developer's Id. Everything works fine if i assign SAP_ALL authorization to the developer.
Below are the roles assigned to Developer ID -
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Z_S001
ZSAP_SOCM_DEVELOPER
Issue screen -
SU53 for Developer-
Please suggest which roles/Authorization should be assign to Developer Id.
Thanks
Kavita

Hi Kavita,
Copy these roles to Z-roles
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Assign this to user.
Put a stace using ST01.
Find that object and modify/add in your custom role.
Regards,
Divyanshu

Service desk---not able to assign employee and user to a position

As i click on employee or user one popup comes and doesn't open. Therefore i am not able to assign a employee or user to a position.
Friends please help me out.
regards
Rajneesh

Hi Rajneesh,
yes, please use the IE and add the pop-up-page to the compatibility mode under "EXTRAS --> Settings for compotibility mode --> ADD".
Cheers,
Robert

Not able to assign the chart of depreciation

Hi i am not able to assign the chart of depreciation, can any one provide me the detail path for the below issue.
Inconsistency between FI company code BHEL and chart of deprec. BHEL
Message no. AC481
Diagnosis
You tried to assign chart of depreciation BHEL to company code BHEL. According to its Customizing definition, this company code manages parallel currencies.
The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
System Response
This assignment is not possible.
Procedure
1. Check the currency types of the company code.
2. Specify a corresponding depreciation area for each currency type.

Dear,
Rajesh.
Good Morning !
If your company code is having more than one currency than you will have to maintain that many depreciation areas.
OR
Before assigning COD to Company Code, delete the parallel currency maintained in multiple currencies in global settings.
below is the path:-
SPRO>Financial Accounting>Financial Accounting Global Settings>Company Code>Multiple Currencies-->Define Additional Local Currencies
After deleting you can assign the COD to Company Code.
After assigning you have go back again in define additional local currencies screen (mentioned above) and maintain the parallel currency which you have deleted.
You have first to Assign Input Tax Indicator for Non-Taxable Acquisitions in transaction code OBCL.
Check your parallel currencies in T.code OABT.
I hope this will help you to solve your issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.

Not able to assign ringtone to particular contact

Hello,
I just updated my SE Live with walkman (WT19i) with Android ICS 4. After updation its working fine.
But, I am not able to assign ringtone to any contact. It always shows as default ring tone.
Kindly do needful.
Thanks,
Zinith Patel

Use SUS instead
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Not able to Assign Organizational Units to the Sites

Hi all,
while configuring intercompany billing I am not able to assign the Organizational Units to the Sites.
I am in retail system and maybe here I have to do something else before seting up the intercompany?
Thanks in advance
L

Hi,
Go through the Building block and their prerequisites
http://help.sap.com/bp_bblibrary/600/html/R01_EN_DE.htm
http://help.sap.com/bp_bblibrary/600/html/R41_EN_DE.htm
Thanks
Chidambaram

Not able to assign process server to file events.

Hi,
our requirement is we want a file event to be raised when ever a file is uploaded in BW.
when we tried to configured a file event we are not able to assign a process server. when we click on process server our bw process server is not popped up.
i am not clear what setting needs to be maintained in dataroot directory.
Process Server>>Parametes>>Data root directory
or
do we need to set up any platform agent on BW System
please advise.

Hi Anthon ,
1)Do we require seperate license for Platform agents and once after downloading the platform agent can we install from CPS side by submitting job definition or this is a BASIS job to install the platform agent on the system where we want the files to be detected.
2)is there any setting needs to be done on CPS side after we intall Platform Agents in the bw system.
Regards
Rajesh Dhaval

NOT ABLE TO ASSIGN MO:OPERATING UNIT PROFILE VAL TO A RESPONSIBILITY

I am trying to create new orgnization and assigning parameters in AP. I am not able to assign profile values. Could you pl. clarify foll points..
To generate seeded data, it is displaying(in the concurrent program) existing operating unit in the LOV not the new Operating unit that I created.
When i try to associate new Responsibilty to MO operating unit level, it is displaying existing organization not newly created org.
NOt able to assign profile values to business group(field is protected against update) as I created new ORG not with "setup Business Group".
When i click legal entity parameter in operating unit, it is displaying
"NO ENTRIES FOUND FOR LIST OF VALUES"
I would appreciate your early response
Thanks
Ven.
[email protected]

Hi Nagamohan
Your query returned me the seeded ones:
GL_AUTO_ALLOC_WF_PKG
PA_AUTOALLOC_WF_PKG
We have a value at the site level, and at the 1st OM super user responsibility having the issue has no default value, hence defaulting the value from the site level.
The other OM super user responsibility has a value. And this value is defaulted to the 1st OM responsibility profile from time to time.
The other responsibility OM Administrator have no problem. This value changes when the users logged into this OM super user responsibilities (both OU), the value switches back and forth to 2nd OU value and then the site level value fills the value for the 1st OM super user responsibility(even though we didn't have any default value before).
If the users logged into 1st OM Administrator responsibility to process the orders, then no problem, the value stays to the correct OU).
We have been relying on the defaulting value(coming from the site level) for all this time and have had no problems until now. It was always blank for the 1st OM super user. but, when the problem started then only it's having issue. I manually deleted the value (wrong value from the other OU) at the 1st OM Super user level, then next time the user logs into the 1st OM Super user resp, then it's having the correct value(same as site), and keep on updating the value with this correct value. But, all of a sudden it changes to the wrong OU value, don't know what object is causing this...
Thanks
Radhika

NOT able to assign business system in ID

Dear all ,
i am not able to see my business system in the list when am trying to assign
business system.
i also tried refreshing the SLD cache but not working.
if u can help.
Regards,
Tarang Shah

Hi Tarang,
Just check if you have the right permissions to do that.
It can also happend that the businees system is not added in the SLD or SLD has to be refreshed.
regards,
younus

Not able to assign my purchased item in avg costing organisation

Dear Sir
Our company is an Average Costing Organisation. When I try to assign an item (After applying Purchased Item Template) to my organisation, I am not able to save it. But If I apply Finished Good and Subassembly Templates, I am able to assign the item to my organisation. Please clarify
Merlin Rajesh

Declare Average rate type in average costing org meters and assign purchased item
M.U.Shankar

Myeclipse : tomcat project not able to create

Good evening to all
I installed eclipse then i had installed Myeclipse5.5.1
What is my doubt means
While creating new project
new-> Project ->new project Wizard is opening in that iam not able to find the Tomcat project
in the toolbar iam not able to find the Start Tomcat ,stop tomcat..
Will anyone help me!!!
its very urgent..
I tried for two days by uninstalling and again installing the software..
Lots of thanks in advance

its very urgent..
tried for two days by uninstalling and again
installing the software..Ask on an Eclipse forum.Probably better to ask on a MyEclipse forum.

KEA0 - not able to assign characteristic to Op. Concern

Hi,
i'm trying to assign a user-defined characteristic to a operating concern in KEA0. This characteristic is already active in KEA5, i'm entering KEA0, clicking on "Modify", then I click on "Data Strucutre" - button "active", the list of characteristics appear. But i'm not able to see the right column with the non-assigned characteristics, so I cannot transfer it to the left side.
Can you help me?
Regards
Mayumi

Hi
With in KEA0 - Click on DISPLAY /CHANGE Data Structure button
In next screen, click on CHANGE VIEW button.. You will see the chars populated on the right side...
You may need to unlock the chars before transf from Right to left side (Extras > Chars > Unlock)
After you transfer - SAVE and Click on ACTIVATE button (Candle icon)
Now press back button.. System would ask you to Regenerate the Op concern....
Later on create a transport request from KE3I and transport it across
br, Ajay M

Not able to assign Composite Role to Position

Hello All,
I am facing following problems.
1) The user is Not able to see Create Report Links, when i checked the Composite Role in PFCG i found that the in USER Tab Organizational Tab was yellow, i did Indirect Reconcillatin in Organizational Tab and then it went GREEN, then i did User Comparision.
I got this Message
"You do not need to perform Prfile Comparision for role " Role Name".
and the Position was removed.
2) Now i am Trying to assing the Role to Position, i am not even able to assign it and the User id is not coming under User id list.
Please suggest.
Thanks,
CB

@Point#1: It could be that user master is already compared for your composite role and no further comparison is required. To double check you might just run the comparison again via tcode PFUD or report RHAUTUPD_NEW
@Point#2: For indirect assigment to position make sure organization management is active in your system (the switch HR_ORG_ACTIVE is set in the table PRGN_CUST to YES).
Thanks
Sandipan

Projects not able to CHECKIN..STUCKING in Queue..

Hi all,
I have an issue ,
Once the Projects are getting published iam not able to checkin the projects as they are getting stucked in queue jobs.Can anyone please comeout witha solution that would be helpful
Thanks in Advance.
Regards
Soumay
Soumya T | EPM Consultant

As Guillaume mentioned, try restarting your queue service, but in order to identify the problem we would need some more details along with what Guillaume already mentioned,
How many threads have been defined for queue
Sort the Job queue by Position and look for jobs processing from position 1
When you say your checkin job is stuck what state the job remains in?
As Queue follows the sequential mechanism to process job, can you check if there are already jobs in the processing state before checkin ?
Are there any customizations involved like, event handlers on check in or any other thing being performed?
By my experience in most cases, we have seen slow processing of the queue being influenced by the Database processing and it goes to a whole another level of discussion on the performance
Once you provide some more info, we would be able to give you some pointers on where & what to look for ?
Thanks | epmXperts | http://epmxperts.wordpress.com

Not able to assign vendor on SC

Hello Experts,
(SRM 5.0; Extended Classic)
I'm facing an issue with indicating vendor on shopping card. When I create a shopping card and open tab Sources of Supply / Service Agents, there is only "Preferred Vendor" field active. Above that there is a information:
"No vendor assigned
No vendors/contracts/info records exist"
and no active field where I could put vendor number.
I have replicated vendors and materials from backend. I have extended classic scenario so I understand I cannot have inforecord reached from the backend. I also have contracts locally created for item for which I create SC. And still information as specified above.
I need to be able to indicate vendor, not preffered vendor. For Instance, when I transfer PM order (with vendor specified on it) to SRM, SC is created and field vendor is correclty filled with vendor I specified in PM order. But when I create SC manually on SRM, field Vendor is not available, only "Prefered Vendor" and this info quoted above.
Did you have maybe similar problem. How can I solve it?

Hi
Which R/3 version are you using ?
You need to do the following SPRO config settings.
SPRO> SRM server-> Sourcing> Define Sourcing for product categories.
Here you need to select the sourcing always carried out in the front of the respective product categories. Once you do it you will be able to get the vendors.
Also Make sure that you have replicated from ecc purch org, material master and vendor master. Only then you will be able to see the sos. The purch org in the shopping cart must be the same of the contract/info record.
Also Did you try implementing BBP_SOS_BADI ? Please check for the BADI - BBP_SRC_DETERMINE ?
Related links ->
Re: Info Record Not Appearing for all materials in classic scenario.
Re: Error during determn of backend follow-on doc for shopping cart....
Do let me know.
Regards
- Atul

TDMS Project not able to assign a landscape

Similar Messages

Maybe you are looking for