Technical and Business Advantage of WDA application over JAVA based applic

Hi folks,
We want to develop a portal and not sure whether we should go for JAVA or WDA. So what could be Technical and Business Advantage of WDA over JAVA.
Regards
PG

Hi PG,
Both have their own advantages and some disadvantages. Based on your requirements and possiblities you choose
which suits to your requirement.
Check this.. you will get some idea.
http://www.sapfrontend.com/webdynpro-for-java-or-webdynpro-for-abap/
Cheers,
Kris.

Similar Messages

Creation of Technical and Business Systems

HI Experts,
If I am having the one ECC, SAP 4.6C , Sap 4.7E, Mainframe , SQL Server systems, to integrate all these systems how we can maintain these in SLD.
Please Explain how many Technical Systems and Business Systems for these systems.
thax

Hi Sridhar
It is depend upon the type of the scenarios and your requirement.
There are a few basics you need to understand to be able to answer this.
1, Technical and Business Systems are of 3 types Java / ABAP and ThirdParty.
2. When dealing with Java Proxies and Idocs/ ABAP Proxies, you need to create Technical and Business Systems corresponding to your SAP systems.
3. For JDBC and SOAP etc, you can use a single Third Party Business System or , create multiple corresponding to each system you are integrtaing with you can use Business Service etc!
there are no hard and fast rules for JDBC , SOAP adapters and it all depends on how you are architecturally strucutring your SLD and your entire Integration landscape.
Cheers..
Vasu
** Reward Points if found useful **

XI Technical and Business System Definition For MDM 2.0

Hi,
We're trying to define the XI technical and business system definitions for our MDM 2.0 installation to work with SRM 5.0 and PI 7.0.
In the documentation we have we can't find reference to what type of a technical and business system to define. Should they be abap/java/standalone/3rd party?
Does anyone have any install scripts of what they did?
Regards,
Jerry Martinek

You can set it as third party and it will work fine. Because MDM isn't built on the wed application server like the majority of the netweaver apps, it's basically treated like a third party system as far as integration is concerned. Hence you send and receive XML documents to PI and convert them into IDocs to send to R/3
Check the beginning of this document on creating the business and technical systems for MDM
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario

Difference between Technical and Business transaction archiving?

Hi Guys,
Can any one explain the difference between Technical and business transaction archiving with practical example?
When we will go for Technical archiving and when we will go for business transaction archiving?
Thanks,
Vinod.

Hello Vinod,
To me, Archiving Objects can be separated into 3 categories; Technical, Master Data and Transactional. Technical Archiving would include archive objects such as IDOC's, BC_SBAL (application logs), BDCLOGPROD (batch input logs), etc. Master Data Archive Objects would include MM_MATNR (material master), FI_ACCPAYB (vendor master data), FI_ACCRECV (customer master data), etc. And, Transactional Archive Objects would include FI_DOCUMNT (financial documents), SD_VBAK (sales orders), MM_EKKO (purchase orders), etc.
Techincal Archive Objects usually are easier to implement and require less resources. Master Data and Transactional Archive Objects usually take longer to implement as they will require business testing and sign-off.
This is a high-level explanation and I hope it helps answer your questions.
Best Regards,
Karin Tillotson

Gathering Technical and Business Requirements for SAP PI

I need to some documents and tools, or interview guide & questionnaire to gather the stakeholders' technical and business requirements for SAP PI

Thanks for the links,
I am quite new at SAP and currently trying to elaborate should i use SAP PI or not based on my project stakeholder's requirements.
And my biggest problem right now is how to capture technology and business requirements and match them with SAP PI
I plan to use this format while requirements gathering about integration platform:
1- Draft Requirements
Q- What is the names and status of sending and receiving application and how they will be used
2- Detailed Requirements
Q- Connectivity, Administrative and Business related questins
3- Administrative and project management information
Q- Which applications are involved, who is the original supplier? Who is technical contact at the supplier
4- Business requirements
Q- Questions about the information flow which will support some business processes
5- Connectivity to applications
Q- Questions about connectivity mechanism, file formats (flat file or XML or something else), data access methods and so on
What do you think about the general concept?
Edited by: Alper Celik on Feb 2, 2009 10:37 AM

How To Create A Technical And Business Systems For Web AS ABAP ???

Hi Experts,
How To Create A Technical And Business Systems For Web AS ABAP ???
Please Let me Know All the Step-By-Step Process to Create ????
Points Will be Given
Regards
Khanna

Hi Sumit,
When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
So I got An Entry for the Technical System for XI System.
Now i Deleted that and Executed RZ70 in R/3.
When I Executed RZ70, I got this Error.
 "RFC Call failed: Error Opening an RFC Connection ".
Now I am Unable to see Any Technical System Under Web As ABAP. It's Showing Empty Now.
Please Let me know
Regards
Khanna

SLD Export / import Technical and Business systems

Dear all,
I am new to SLD administration.
We have task to update the local SLD on the Production PI system PPI ( Target ) with the business systems ZEC, ZSC from the Production Master SLD on Production solution manager system
PSM ( source ) using Export/Import on the necessary technical and business systems.
Please confirm whether i am following correct steps :
Go to SLD Administration on PPI target system
ALL Instances
Instances by Class
Model
( which one of this option need to be selected , please let me know ?? )
Go to SLD Administration on PSM source system.
select Export button ->
Select business systems one by one and perform Export which will create .ZIP file
at local machine.
Go to SLD Administration on PPI target system
select Import button ->
Select Export ZIP file which created in previous steps from PSM and provide location from desktop
Start Import button ( only if you get Continue import option )
Please let me know if above procedure is correct for business systems
if yes then what need to be done for Technical system ??...do they require Export/import also ?
If yes when i go to technical system option i get Export option disabled...but same way when i go to
business systems option i get Export button enable and able to perform the export.
Do i need to only Export / Import business systems ?
Plese help me.
Regards,
RR

Manoj,
It seems entries are added manually .... should we remove and run Import for the same ...
or just try to overwrite .... in case of overwrite option ( as we have open OSS message ) SAP has suggested through OSS message that If you end up with problems when trying to overwrite, then the PPI SLD is broken and will have to be re-built because someone made a manual change to it and got the GUIDs out of synch with the master.
I do not understand if target system PPI SLD gets broken during overwriting operation as mentioned by SAP ... whats is the way / steps / procedure to Re-build SLD .
In rebuilt - process do i need to Import ( Export -> Export lines -> ALL ) the export backup created before start of this activity ? please let me know SLD rebuilt steps and about Remove - reimport issue.
Appreciate you time on this. thanks in advance.

Technical and Business System

Hi,
I need to create a business system called ERT which is a sap R/3 system.
As we are using XI 3.0, please do provide the steps.
Moreover, once we create the technical and business system, how do we actually test it without running an scenario.
Regards
Krish

Guys,
I tried creating comparing with development environment.
The only problem i am facing is that when we click technical system landscape, you have a parameter called system home.
That one is highlighted in development environment whereas it is not in my environment.
While giving some details, i dont know where to give the IP address of the technical system name.
If some kind of weblog is there, would be really helpful.

XI Technical and Business System Definitions For MDM 2.0

Hi,
We're trying to define the XI technical and business system definitions for our MDM 2.0 installation to work with SRM 5.0 and PI 7.0.
In the documentation we have we can't find reference to what type of a technical and business system to define. Should they be abap/java/standalone/3rd party?
Does anyone have any install scripts of what they did?
Regards,
Jerry Martinek

Third party will work fine

Real life technical and business issues--FICO--implementation

Hello,
Can someone please give some real-life Technical and Business issues and problems faced by FICO consultant in different-different phases of implementation (asap)? please provide from basic to critical examples?
Thanks,
Amit
Moderator: Please, respect the rules of the forum

What you are asking is very project specific.
Try to do the following:
1. Ask for the detailed business requirements
2. Ask for the design documents. Usually, there will be bunch of documents that got documented when the project team made the design. There must be documents like conceptual / high level design, detailed / low level design, ABAP specifications, report specifications, etc.
3. The design documents will contian other things, DATA FLOW DIAGRAM. Here in this diagram, you will see where the data comes and how it gets processed and transformed when the data reaches BW.
4. Ask for your access to the develoment system or the sandbox ( where you can play around without affecting anybody's work).
5. With the data fliow, you keep reviewing the objects in BW and also in the source system.
6. Even if you dont get access to dev or sandbox, you cans till view the objects in display mode.
7. Open the query designer and see how the variables are defined and how formulas are defined and how the restricted key figures are defined.
8. In production system, go to SM37 and see the jobs that are scheduled.
9. Try and co ordinate weekly calls with your team members and this is the place where ideas and problems will be shared.
If you have specific questions ot need some specific help, dont hesitate to send me a note. My email is [email protected]
Best luck,
Ravi Thothadri

How to decide no.Technical and Business Systems required for any senario

Hi XI experts
     I am very new to XI but it is very interesting ....
     To develop any scenario how to decide Technical systems and Business
     Systems...
     For any scenario but how to decide the systems howmany to create ?
     I had a scenario like SOAP to RFC to SOAP ? For this how to decide?
     One more like FILES to BPM to JDBC ...like
     Can any one explain me for any scenario which may include SAP
     R/3,CRM,APO,BW,JDBC,SOAP,RFC...any system.
Adv..thanks and points to all
Kiranlvs

Hi Kiran.
Ok here I will try to answer your question.
1) SOAP (Web Service) -> RFC (R/3) -> SOAP (Web Service)
a) you will need to create a Business System for R/3.
b) you will need to create a third party business system or a business service for the Web Service system.
2) File (File System) -> XI -> JDBC (Database)
a) you will need to create a third party business system or a business service for the File system.
b) you will need to create a third party business system or a business service for the Database system.
note: BPM is one of the functionality of XI so there is no need to create a BS or TS for it.
3) CRM or APO or BW (SAp Systems) -> XI -> IDoc (R/3)
a) Business System for CRM or APO or BW
b) Business System for R/3.
The bottom line is you need to create Business System for any SAP system that is part of you integration scenario or when you have to Idoc, RFC and Proxies.
If the business system already exists for the SAP system then you just need to attach your SWCV or Product to that Business System.
Regards,
Ashish

Change in technical and business system.

hi,
in production we are replacing SRM system with NEW SRM system.the only difference is the host name.if create a new technical system with new host name and business system based on this techical system,will the scenario work perfectly.
all other details are same in both.
the business system name is same as previous and in scenario of integration directory.
will the change in HOST NAME effect the scenario.
plz let me know and the abap tables in which the details of this T SYS and B SYS are stored in .
thanks and regards
vijender

Hi,
The Following things needs to be take care
1) Make sure that your Logical System name is same as Old one in the Newly created TS
2) Make sure that Your BS name is same as Old Name
After this do SLD data Update through ID-Environment-SLD cache update
Now trigger the Scenario
REgards
Seshagiri

Creation of technical system and business system

Hi Guys,
Im just a beginner in SAP XI..I would like to know what will be the setup in my SLD .
My data will be coming from MS SQL and will transfer it to SAP R/3.
Is it true that I need to setup the Technical system , one for my Sender (data coming from sql ) and
one for my Receiver (data will transfer to SAP R/3).
about the Business system? do i need to create buss system for Sender and receiver?
Please help.
Thanks in advance.
aVaDuDz

Hi,
you don't have to create technical system for R/3 you should better use tcode RZ70 for selfregistering:
The specified item was not found.
And for this technical system you should create also a business system.
You should create a technical and business system for your MS SQL if it's inside of your system landscape.
Here is a good explanation:
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/01ea90ab24235de10000000a1553f7/frameset.htm
Regards
Patrick
Edited by: Patrick Koehnen on Oct 2, 2008 10:26 AM

About ABAP Technical Systems and Business Systems

Hi experts,
I have an Integration scenary with XI and an R3 vía RFC. I've already created it in the development environment and when I'm going to transport to Consolidation and Production I find that the ABAP Business System related to the ABAP Technical System of the R3 have a different name from the development one.
In the Integration Repository everything its OK because my scenario is developped on a third party system BS and TS. The problem is in the Directory because of the BS of the Message interfaces....
I think that transport Directory scenario with .tpt wont work. I'll probably have to develop it in each environment... What do you think?
Regards
Gonzalo

This is what you need to do to move from Dev to QA.
1. Go to Dev SLD and Export all your SWCV, Products, Technical and Business Systems. This is nothing but saving of the SLD objects as a CIM file on your local machine. You would also need to export the Technical And Business System poitning to your XI integration server .
2. Go to the QA SLD and then import these objects exported in Step 1 in QA SLD
3. Now, create the QA Tech and Business Systems in the QA SLD
4. Go to the Dev Business systems imported on the QS SLD and you will have an option Transport Targets. In this map the Source Business System to the Target Business Systems.
Make sure that all Dev Business Systems have the correspodning Transport Targets for the QA Business SYstems
5. Now if you import the ID objects in QA , the business systems name will be renamed automatically.
Regards
Bhavesh

Technical systems and Business systems in SAP XI

can any one tell me ,breifly explain the diff b/w Technical Systems & Business Systems?
steps to create Techincal system and Business systems?
and also Steps for creating Software Components? For Technical System we can create more than one Business systems ,what it means?can any one explain?

Hi
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
U can also refer Blog's
Re: Difference betweeen Technical systems and Business systems
For creation of software component see link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3172d290-0201-0010-2b80-c59c8292dcc9
Reward point if it help u understand

Message was edited by:
Ajay Kumar

Technical and Business Advantage of WDA application over JAVA based applic

Similar Messages

Maybe you are looking for