Template Installer for BI and EP integration

Dear Friends,
I am trying to Configure my BI 7 system to EP.
and according to SAP Note - 917950 template installer is standard procedure
to configure it.
i access this tool through http://<host>:<port>/nwa.
when i run the template after entering required values in given fields.
i got error message on step one.
Element 'SAPConfigLib.IDS.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.IDS.Unclassified.createRfcDestination':Error during executing Java Reflection:JCO.Client not connected in repository call
Any help highly Appricated,
Regards,
Malik

Hi Malik,
Did you create RFC destinations properly....
here is the document...
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/6e0f41218ff023e10000000a155106/content.htm
the same problem what you are facing is.. http://sap.ittoolbox.com/groups/technical-functional/sap-basis/error-in-bi-post-install-2053496
regards,
Pradeep

Similar Messages

Template Installer for nwdi.

Hi,
I installed NWDI and in the documentaion I read about executing the DI template Installer as a pre-requisite.
I have never done this before and I checked the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm
Is it necessary to do run this? For NWDI for ESS/MSS web dynpro customization, what scenario should I select?
can anyone please explain more about the template installer.
thanks
regards
sm

Hi,
DI template Installer:
NetWeaver 2004s Usage Type DI (NWDI) Installation
template installer
http://help.sap.com/saphelp_nw04s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm
ESS/MSS web dynpro customization
Customizing ESS Business Package using Web Dynpro
Regards,
Senthil K.

SAP Cloud For Customer and Gmail Integration

Hi Experts,
Is it possible to integration SAP cloud for customer with Gmail ?
Please share your valuable thoughts on this post.
Many Thanks
Mithun

Hi Mithun,
There is no Add-In for Gmail as we have for Outlook and Lotus Notes in the current release of the system.
You can only integrate Gmail as you do for other email services:
http://scn.sap.com/community/cloud-for-customer/blog/2014/04/14/enabling-ios-push-notifications-on-cloud-for-customer
You can also integrate Gmail via IFTTT to enable iOS Push Notifications:
http://scn.sap.com/community/cloud-for-customer/blog/2014/04/02/guide-how-to-configure-workflow-to-send-email-notifications-and-create-tasks
Hope it helps.
Best Regards,
Cristiano

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

Documentation for SalesCloud and Rightnow integration.?

Documentation for SalesCloud and Rightnow integration

Unfortunately I could not find any references for such documentation. You may want to contact support to see if they have had similar questions.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Template Option for Vendor and Customer

Hi All,
MDG Version EHP 7
I am working on Vendor Like UI , Is there any option where i can use a already created Vendor or Customer as a Template and create a similar record ???
Currently when i use the search UI or Create UI i do not see any options for using a Template.
Regards,
Vag Vignesh Shenoy

Dear Vignesh,
I am not sure about the template. But SAP provided the Reference option to copy the existing vendor detail to creating the new Vendor/Customer master record. With this field you can create the vendor/customer easily. No need of any template. Thanks.
Regards,
Inthiyaz
Message was edited by: Inthiyaz Ahemmed

Post installation for Portal and errors for new system

I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
2) When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 05:05_25/03/10_0032_7012350
See the details for the exception ID in the log file
The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
J2EE Process Details
Name Type PID Status Debug
Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
SDM SDM Server 4,736 Running Switched off
Server0 ID7012350 J2EE Server 596 Running Disabled
Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
Thanks,

Hi Jay,
Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
- Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
- Check JAVA_HOME Enviromental variable is added or not under "System Variable'
Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services manually and change prperties as automatic)
Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
Hope it helps
Regards
Arun

Which files need installation for Photoshop and Premiere Elements 9

In the list of files for download for the Photoshop and Premiere Elements 9 Plus package that I just purchased,
(Windows 7) there is a single "Premiere Content ALL" file of ~4.2GB. There are also 6 files called "Premiere
Content 1" (and 2 2nd 3), and "Premiere Content 1 HD" (and 2 and 3).
After smooth installs of the PSE and PRE programs proper, in doing the install of the "Premiere Content ALL"
file, it seems like the "Content 1-3 and 1-3 HD" files were included in it (judging by the file nmes flashing on
the screen during the install, and in poking around in the install directory).
What I would like to know is: are the 6 Content 1-3 and 1-3 HD file included in the Content ALL file, and if so,
are they at the same revision level as what's in the Content ALL file.
I don't want to just try installing the individual Content files over the ALL file install, as that might well screw
something or other up.
I tried getting an answer to this on the phone with Adobe support, but could not get an unambiguous answer
from either of the two support people I spoke to.
Any help would be appreciated.
Thanks ...
/kim

Thanks for the reply.   The real question though was/is are ALL the files contained in the 6 separate content archive files
(Content 1, Content 2, Content 3, Content HD 1, Content HD 2, and Content HD 3) also contained in the single archive
file called Content ALL?
Since I was unable to get a definitive answer to that question, I went ahead and downloaded all 7 of the Content archive
files, extracted all of the archived files in the *.7z files and compared the timestamps and sizes of the files in the 6 individual archives to the timestamps and sizes of the files from the "ALL" archive.   The files within the 6 archives matched those
in the ALL archive.
And since the sizes of all 7 *.exe files are identical, I suspect they are all the same and simply invoke an unarchiver
for their respective 7z file, using their own filename as the argument to the builtin program.
The overall result is that I have verified to my own satisfaction that the contents of the 6 individual Content XX files
*are* contained within the single Content ALL file.
It would have been NICE if Adobe had bothered to TELL their customers that, so they wouldn't spend twice the time in
downloading 6 unnecessary files which in reality just duplicate the ALL file.   Plus in my case, spending an hour or
two verifying that the contents of the 6 files were also in the ALL file.   Sheesh.
C'est la vie ...

Captivate 5.5 Template -- Settings for Demo and Training modes

Hi
I am trying to create a Captivate 5.5 template for our simulations which will be captured in both Demonstration and Training modes.
In the template file, I go to Edit > Preferences > Modes, select the both the modes (from the drop-down list) and make required settings, and save the template.
Now, when I try to record a new project based on this template, I am asked to select any one of the modes. As a result, I get only one type of output. How to get both modes in one go? Is there a workaround?
Thanks for your help.

You'll need to add your simulation capture slides to the template AFTER capturing the two outputs. The template can only really be used as a shell to add introduction and conclusions, as well as quizzing etc.
Since (as Lieve points out) you end up with separate files for each different output, you'll also need to use the templates to create a shell project for each different output, and then paste the slides from the captures into the shell as it were.
Quite frankly, you're better off doing things this way anyway (capturing first and then pasting the capture slides into another shell project) because in any capture project you need to do quite a bit of editing and culling of duplicates or redundant captures. It's quicker and easier to do this editing when the project file is smaller. So what I do is clean up my captures first to get down to the minimum number of slides required for the simulation, and then paste those slides into my project file generated from the template. I do the copy/paste after culling out the unnecessary slides, but before saving the capture file. That way, I always have all of the original captures as a backup in case I went too far in the culling. Only after the project has been finalised to I go back and delete the original captures.

Template scaling for A4 and Letter

Post Author: jennm
CA Forum: Crystal Reports
Hello all,
Just a quick little question regarding the paper size for a crystal report template. I have created a template that is letter sized but I also want it to scale down for A4. In my VB code I have
crOrderPrintout.PrintOptions.PaperSize = CrystalDecisions.Shared.PaperSize.PaperLetter
or
crOrderPrintout.PrintOptions.PaperSize = CrystalDecisions.Shared.PaperSize.PaperA4
based on the country selected.
Now my A4 report gets chopped off. I can certainly take my current template, save it as someting else, change the paper size and based on country use that template but I'm wondering if there's something I can do in my code to make the letter report fit on the A4 paper. If I save it to a PDF and open up in Adobe and print from there, it gives me to option of page scaling but the user won't be opening up the report, it will get sent to the printer automatically.
Thanks for any suggestions!
<Edit>
I did some more playing around and I found something that seemed to work. In the designer if I check out the Page Settings, I clicked the "Adjust Automatically". And voila! It works.

Use this code, in intialization
data: lx_sf_header(31) type c,
field-symbols: <fs_header> type SSFFORMHD.
if company_code = 'XXXX'.
CONCATENATE '(' sy-repid ')%HEADER' into lx_sf_header.
assign (lx_sf_header) to <fs_header>.
<fs_header>-PAGEFORMAT = 'LETTER'.
endif.
Edited by: Nehal Fonseca on Apr 2, 2008 9:46 AM

Office Administrative Template installation with 32 and 64 bits clients

Hello,
I would like to install the Office Administrative Templates (2007, 2010, 2013) but I don't really understand how.
I have several clients computers :
-Windows XP and 7 (the XP will disappear but not now so I have to handle with)
- 32 and 64 bits (OS and associate Office version)
- two Office languages (English and French)
In this case, what I have to put in the domain controllers (or in the central store for GPO, not matters), to cover all the cases ?
I do not understand the x86 or x64 Office administrative templates versions neither how the languages are managed.
Thanks a lot.

The Office2013 Admin Templates+OCT is available in both 32bit and 64bit formats
http://www.microsoft.com/en-us/download/details.aspx?id=35554
Because the download contains the Templates *and* the OCT (OPAX/OPAL and various DLLs etc), and, the OCT itself and also the OCT output file (a customization MSPfile) is architecture-specific, that is why there is a 32bit and a 64bit download.
The ADMX/ADML files themselves, are not architecture-specific.
ADMX and OPAX, is language-neutral, the language-specific details are contained within ADML/OPAL.
https://technet.microsoft.com/en-us/library/cc178992.aspx#section2
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Template Blueprint for management and legal consolidation for BPC 7.0 NW

Hi Gurus,
Does anyone have a template buleprint document for starting with management and legal consolidation in BPC 7.0NW
If you have request you to share me the documents
appreciate your help and many thanks in advance
Deepak

Hi,
please find big volume of information from these threads
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40b25a12-7082-2b10-5c86-c227b9397fb3?overridelayout=truehttps://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09d5f42-36a4-2b10-cb82-fa58febeb7c2?overridelayout=true
Re: Consolidation for SAP BPC
also you can get latest information from
http;//service.sap.com/pam
regards
nag

Template implemntation for oil and gas business with business line of aviat

While standardizing processes across country for a oil and gas business which has implemented SAP ,do a standard template for a fuel business should be used or specific templates for lubes, aviation business lines be used

Hi Vinay,
This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
Regards,
Ashutosh

Agreement Configuration for B2B and BPEL integration

I configured a listening channel on B2B to pick up custom xml files from a folder. I have a BPEL SOA composite that has a B2B adapter as a service to receive the custom xml files from B2B through direct integration. Since B2B has to send the xml file only to a SOA composite and not to another trading partner, how do I configure the agreement in B2B?
Appreciate your help.

Hi Naresh and Anuj,
Thanks a lot for your responses.
This is the problem that I am facing now.
As per your suggestion, I deployed an inbound agreement that specifies that the Sender is the Other TP (EPCOD) and the Receiver is the Host TP EPCOZ). Also I left the channel for the Host TP blank in the agreement - did not select anything from the drop down.
When I drop the file into the folder specified in the internal listening channel, with the following naming convention (EPCOZ_PayableInvoice_1.0_Custom_1234.xml), the file gets picked up, but I get the following error message:
Description: Agreement not found for trading partners: FromTP EPCOZ, ToTP EPCOZ with document type PayableInvoice-1.0-OUTBOUND.
For some reason, it thinks that both the sender and the receiver are the same. If I reverse the file name as EPCOD_PayableInvoice_1.0_Custom_1234.xml, then it thinks that the From TP is EPCOZ and the To TP is EPCOD.
Any ideas? Appreciate your help.
Thanks.
Raja

Webdynpro for ABAP and Portal Integration

Hi Experts,
we created a WebDynpro for ABAP application for portal. The application will modify/update few fields in backend sap HR table PA0006 (infotype 6) . The end user (portal user) should be able to update his data in backend with the iview created on this application.
I have below two questions in my mind.
1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
Thanks
Ajay

1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
Answer: If you use, for exemple ITS to access this Webdympro, you will not need any action on portal for sure. Actually you will just need actions on portal, if you want to make some customization on portal side. If you want just show the Webdympro how it is, your action are all on backend..
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
If you access via ITS, te custome will acess the backend with the user you have set on the SSO or user-mapping. The portal there is nothing to do in this regards, you must just take care of this on backend.
Please evaluating the answer you are contributing for the SDN keep growing.
Edited by: Fabio Sarmento on Sep 19, 2011 2:41 PM

Template Installer for BI and EP integration

Similar Messages

Maybe you are looking for