Test configuration in PI 7.4

Hello,
I recall that it was possible to test your configuration in Integration Builder in PI 7.1. Is this feature gone in 7.4?
It was very convenient when trying XPATH-conditions etc.

i guess you are using single stack. please check Alexander Bundschuh comments in below blog.
What's new in SAP Process Orchestration 7.31 SP12 / 7.4 SP07
it is nice feature to have. unfortunately it is not available for ICO scenarios.

Similar Messages

Sql Exception on Testing Configuration with SQL Server JDBC driver for XA

I have a requirement of analyzing the behavior of SQL Server JDBC data sources for XA transactions in our application.We have been using Non-XA drivers for both Oracle and SQL Server as we had no requirement for transactions spanning across multiple databases in past.I have setup and tested the XA driver for Oracle (Oracle Driver (Thin XA) for Instance Connections 9.0.1,9.2.0,10,11) in Weblogic 11g and its working perfectly for transactions spanning across two databases.No when I am trying to configure weblogic 11g R1 for Sql server JDBC driver to support XA transactions with driver details as follows,
Server:Weblogic 11g R1
Driver Type: MS Sql Server
Database Driver :Oracle's MS SQL Server Driver(Type 4 XA) Version:7.0,2000,2005)
Database:SQL Server 2005(Single Instance)
and try to create a new data source and select "Test Configuration" and following error is thrown ,
<Mar 17, 2011 4:49:49 PM GMT+05:30> <Error> <Console> <BEA-240003> <Console encountered the following error java.sql.SQLException: [OWLS][SQLServer JDBC Driver][SQLServer]xa_open (0) returns -3
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createAppropriateSQLExceptionInstance(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createSQLException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
at weblogic.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonTransitionToState(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.executeUpdateInternal(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.executeUpdate(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.open(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection.init(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection40.init(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseClassCreatorForJDBC40.createXaConnection(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXADataSource.getXAConnection(Unknown Source)
at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:550)
at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:450)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I followed the instruction in weblogic jdbc drivers guide to configure the JTA Transactions to support XA on SQL Server machine and weblogic server which included,
1.Copying sqljdbc.dll copied to SQL_Server_Root/bin directory from WL_HOME\server\lib.
2.Copied instjdbc.sql to sql server machine and executed the script with following output,
Changed database context to 'master'.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover2', because it does not exist or you do not have permission.
creating JDBC XA procedures
instxa.sql completed successfully.
3.Verified that MSDTC service is running on both SQL Server and weblogic machines with XA Transaction enabled and DTC option enabled for both inbound and outbound connections.
4.Copied sqljdbc.jar (version 3.0 downloaded from msdn portal) to "C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver" directory and updated weblogic_classpth variable in commEnv.cmd file.
set WEBLOGIC_CLASSPATH=%JAVA_HOME%\lib\tools.jar;%BEA_HOME%\utils\config\10.3\config-launch.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%FEATURES_DIR%\weblogic.server.modules_10.3.2.0.jar;%WL_HOME%\server\lib\webservices.jar;%ANT_HOME%/lib/ant-all.jar;%ANT_CONTRIB%/lib/ant-contrib.jar;C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver\server\ext\jdbc\sqlserver\sqljdbc.jar
Can some one please provide some input on whats causing this and any other steps needs to be followed to implement XA support using SQL Server JDBC driver.

You seem to have done everything correctly and diligently. I would ask that you open
an official support case.

Error while running test configuration

Hi,
I created a test script using SAPGUI and test configuration.In test configuration,i created 2 variants other than default one.Downloaded the variants and executed it. It was giving error "Error inn ecatt command SAPGUI","Cannot Find Screen Element in Replay Mode". When i run test script alone,its working fine.
Please tell me how to correct the problem.
Thanks,
Aparna.

Hello Aparna,
As per the error description give by you , it means that when you execute the script recorded the eCATT control is unable to find the screen element in the screen recorded , possible reasons may be that the control may be in some other screen and trying to find the screen element of the other screen in the present screen.
Solution to this may be check the connection id and the session id of the SAPGUI where the script is failing.
Ideally all the connection id and session id of all the SAPGUI's recorded has to be same so that execution takes place in a single session.
Hope it answers your question.
Thanks and Best regards,
Ajay

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

How To Test Idoc To File Scenario in ID From Tools- Test Configuration

Hi All,
Can any body help me in step by step process including screenshots for testing Idoc to file scenario in integration directory from tools->test configuration.
My scenario is passing the PO Idoc data from R/3 into a file using XI.
i have processed the idoc from R/3 and now i went to sxmb_moni in XI system and took the payload xml data.
In ID I have navigated to test configuration from tools then i have provided the following information.
Sender Service : Business system of R/3 b'coz here R/3 is the sender.
Sender Interface : ORDERS.ORDERS6
Receiver Service : Business system of XI b'coz here XI receives the data and places it into a file
In payload text box i have copied the xml code which i have taken from sxmb_moni and clicked the run button. then i got the following error:
Sender Agreement
Internal Error
 HTTP connection to ABAP Runtime failed.
 Error: 403 Forbidden
 URL: http://bxdci.boewe.custservice.de:8093/sap/xi/simulation?sap-client=100
 User: PIDIRUSER
Kindly look into it and correct me if iam wrong or is there any other way to test this scenario in ID please suggest.
Thanks & Regards,
Venkat

Hi Venkat,
Specify the test confisuration as follows.
Sender
Service : Business System of SAP R/3 System
Interface : The outbound message interface name of type the IDOC.
Namespace : will automatically loaded when u select the Interface. Check if it the correct namespace.
Receiver:
Service : Business System name for the Fle system.
Paste the payload that u copied from the sxmb_moni.
Now click on Run and test ur Scenario.
Was the scenario sucessfull in the Message Monitor.
Regards
Santhosh

Testing Configuration in Integration Directory

Hi Friends,
I want to know , If I use the test configuration in ID, by providing sender,receiver and payload, will the message be posted to system? I mean my scenario is of creating Idoc from xi message, so if I test the configuration in ID, will it post the IDoc to my system?? or wll just show that mapping is done properly or not.
Thanks,
Brij.....

Hi,
If I use the test configuration in ID, by providing sender,receiver and payload, will the message be posted to system? - No the msg will not be posted in target system.......
it just shows the mapping output of your incoming msg and whether your configuration is okay or not............
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Feb 9, 2009 3:18 PM

Reg:Error in Test Configure

Hi Guys,
My sce is File to Rfc while testing in Test Configure in ID it giving error as Interface Determination and Operation Mapping not found but when i was trigger from RWB it Processed sucess,can anyone give me solution for this Error
Thanks

Dear Jayan,
Check the following things.
IR
1. Sender File (Check whether the data type, message type, message interface created properly)
2. Receiver RFC (Check the RFC imported correctly)
3. Check Message Mapping and Interface Mapping have done properly. You can test the mapping under Test tab.
Finally check all the IR objects are activated or not.
ID
1. Receiver should be business system, which is configured in SLD
2. In interface determination check the sender interface, receiver interface and interface mapping are configured correctly. (According to your statement here will be the problem, so check this thoroughly)
3. Also check all the other objects Sender Agreement, Receiver determination and Receiver Agreement configured correctly.
Finally check all the ID objects are activated or not.
Regards,
JP.

Error in test configuration -URJENT

Hello every one,
 here i am facing a serious issue from last 5 days. which i am not able to find it where the problem is?.
 the issue is here our scenario is file to R/3. actually on the sender side we created one structure. and on the receiver we have to send this complex data into multiple interfaces. we are going to use proxies to send that data to R/3. I mean MULTI MAPPING
here is the blog that i taken as a reference and followed.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
in ID whenever i am trying to test my configuration it is giving error in INTERFACE DETERMINATION/MAPPING step. here on sender side i am giving the payload directly
we didn't created any communication channel. so we need not create sender agreement.
 i created a mapping program and interface mapping in IR and i tested them also . they are working fine there. but when i am trying to test my scenario in test configuration with the same payload it is giving error in the interface determination and mapping step as intimated above.
 as receiver agreement is unique for an interface i created 3 receiver agreements as we are using three interfaces in receiver side. on the receiver side we are going to use proxies . so we used XI adapter . i am having the doubt that using XI adapter is giving any problem .please let me know.
 please help me . it will be very helpful for me . helpful ideas will be definitely REWARDED.
thanks
Ramana.

Hi Ramana,
I was trying to do the same scenario but stuck up with this.
Could you pls let me know what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth
Message was edited by:
 dushanth ry

How to run Test Configuration in XI

Dear all experts,
I am new in SAP Netweaver and I am trying to get certify my products. Thus, I have some questions and appreciate you can help to clear my doubts below.
1. I have finished configuration in XI, but when I try to run Test Configuration from the Tools, it show error in Receiver Determination stage. Can anyone help to explain how to perform this test? and what should I put in Payload?
The error message:
Receiver Determination
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://pwdf0880.dmzwdf.sap.corp:50080/sap/xi/simulation?sap-client= User: XIDIRUSER
2. My Scenario is a Web Screen (asp.net) calling and passsing a parameter to XI Server, then XI will execute a BAPI to return some data. Can any expert out there give some sample codes in asp.net that send HTTP Request to XI Server?
3. What is the use of WSDL in XML format?
Thanks in advance.
Best regards.
Message was edited by: Adam Lee

Hello Adam,
You sent this other question (below) to my email box. I will answer it here so that other people will benefit from it. To unlock an object which someone has locked, goto homepage of SAP Exchange Infrastructure --> Click on the link at the upper right hand side called "Administration" --> Enter the User name and password (you might not have authorization) to display page --> Select "Lock overview" (left panel) and remove the lock of your selected user.
I've gone ahead to remove it for you.
Also, I did a check on your IS in the Integration Directory called, IS_DISPLAYPO_SUPPLIER, and there was no error. Did you fix it already? It looks like you have everything correctly defined in my first pass. Please let me know if you are still stuck.
Have you also asked your consultant to look into this?
Regards,
John Ta
From: Adam Lee [mailto:[email protected]]
Sent: Monday, Oct 09, 2006 12:19 AM
Subject: RE: Category "SAP NetWeaver - Exchange Infrastructure " has been updated by Adam Lee
Dear John Ta,
Thank you for your kindness and willing to help.
I have sent out contract for the certification. Tuhin is the assigned
consultant to us.
By the way, I have one more question here hoping you able to help me. I
would like to delete an object in XI, but it show an error "Object Data Type
DT_PO_RESP | http://ep-net.com/xi/eProcurement/scm/40 currently being edited
by user EPASIA"
It seems that this object is being locked as I do not have any screen
editing this object. Appreciate if you can guide me how to unlock this
object and delete it?
Thank you.
Best regards,
Adam Lee.

Test FCC without triggering scenario, similar to "Test Configuration" in ID

Hi,
lets say, we are using FCC in receiver file adapter, is there any way to test the FCC conversion (without actually triggering the scenario).
in ID, i see there is a nice tool "Test Configuration", but it ends at ReceiverAgreement and shows the Outgoing message as XML,
is there any way go a step further to see actually the fcc output, or any alternative way.

is there any way go a step further to see actually the fcc output, or any alternative way.
no alternative way to test the Scenario and only possiable with run time .
Test Configuraion : name it self only possiable to test Configuration only.......correctly configured /not..

Integrated configuration (PI 7.1) throws error when do 'Test Configuration'

I am doing Proxy to Web Service (SOAP) sync scenario. We are using Integrated Configuration. After created integrated configuration and test this from (Tools --> Test Configuration) it throws the following error at the receiver agreement step.
Sender Agreement - Green
Receiver Determination - Green
Interface Determination - Green
Operation Mapping - Green
Receiver Agreement - Red.
Problem occurred in receiver agreement for sender -DR4400_D to receiver -ESRI,urn:AssetManagement.AddressManagementSearchCapabilitiesFromECC_Out: No standard agreement found for , DR4400_D, , ESRI, urn::AssetManagement, AddressManagementSearchCapabilitiesFromECC_Out

Test Configuration cannot be used to test Integrated Configuration Scenario.....refer my reply here:
Re: Integrated Configuration in PI7.1
Regards,
Abhishek.

JMS Listner: Test Configuration Successful but not listening the messages

Hi,
I have configured the JMS Listner adapter in IDM 7.0 with Sun MQ 3.5.
My test configuration is susscessful. I have some messages on Sun MQ. I have one wotkflow associated with this adapter. I have mapped it via process rule of Edit Sync Policy. Now I want to read the messages from MQ and want to retrive in my workflow. But when I starts the scynchronization nothing comes to my workflow. The log is showing as
2007-08-16T19:05:38.354+0530: SARunner: initialized adapter
2007-08-16T19:05:38.404+0530: Initializing JMS Listener adapter.
2007-08-16T19:05:38.414+0530: Setting up JMS: local_transaction:true ackMode:1
2007-08-16T19:05:38.414+0530: Setting up JMS: user:admin password:<secret length=5/>
2007-08-16T19:05:38.414+0530: Setting up JMS: destinationType=QUEUE connFactoryName=MyQueueConnectionFactory destinationName=MyQueue messageSelector=null
2007-08-16T19:05:38.424+0530: Connection factory JNDI lookup returned an object of type com.sun.messaging.QueueConnectionFactory
2007-08-16T19:05:38.504+0530: JMS connection and consumer successfully created.
2007-08-16T19:05:38.514+0530: Connection JMS Info
PROVIDER NAME = Sun Java(tm) System Message Queue
PROVIDER VERSION = 3.5
PROVIDER MAJOR = 3
PROVIDER MINOR = 6
JMS VERSION = 1.1
JMS MAJOR = 1
JMS MINOR = 1
CLIENT_ID = null
2007-08-16T19:05:38.524+0530: Done initializing JMS Listener adapter.
2007-08-16T19:05:38.534+0530: SARunner: loop 0
2007-08-16T19:05:38.955+0530: Started, paused until Thu Aug 16 19:05:38 GMT+05:30 2007
2007-08-16T19:05:44.123+0530: Pause completed
2007-08-16T19:05:44.333+0530: Polling
2007-08-16T19:05:45.334+0530: Poll processed 0 messages.
2007-08-16T19:05:45.334+0530: Poll complete.
I am new with this adapter. Please anybody tell me what should I have to configure so that I would be able to read the messages from my JMS Listner Active Sync adapter?
Thanks in Advance

So, in order to get the message you have to map it. That is done be specifying the "Message Mapping", one of the Resource Parameters for JMS Listener. This can be done by specifying a rule that returns a <map> with the attribute. This would be, in my opinion, the preferred approach for text messages. For Map massages, the rule approach can't be used unless you use the jms java libraries, getString etc.
You can also implement the com.waveset.adapter.jms.JmsMessageMapper if java is your cup of tea, and put that in the message mapping text box. Password synch uses a java class to do the mapping.
To map the attribute called accId on the right side, you would use something like this:
<Rule name='JMS Message Mapper Rule'>
 <block>
 <map>
 <s>accId</s>
 <ref>message</ref>
 </map>
 </block>The Message Mapping text box would in this case look like this:
"rule:JMS Message Mapper Rule"
The <ref>message</ref> part contains the JMS text message. In this case the message consist of only one word. In a real-life situation, you would send a bunch of information, perhaps using split to separate the data.

ID: How to use the test Configuration tool

Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.

hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization....

Create Unit Test Vectors From The Unit Test Configuration Window

I have recently been using more test vectors in the unit test framework.
The principle works well but if you are in a unit test and decide you need a test vector you must:
Close the unit test configuration
Create a test vector
Set up your vector (entering values and data types, which is much easier if you could see the actual unit test case)
Close the vector configuration window
Open the unit test configuration
Assign the new vector file to the unit test
Now you can assign vectors to test inputs
This seems convoluted and forces unnecessary context switchs.
I propose that at a minimum, you should be able to create a new vector file and launch it's configuration without leaving the unit test configuration window. I suspect that the whole process could be streamlined even further though.
James Mc
========
CLA and cRIO Fanatic
wiresmithtech.com/blog

Oops supposed to be ideas exchange, sorry!
James Mc
========
CLA and cRIO Fanatic
wiresmithtech.com/blog

Error during test configuration

Hi friends,
Hope u all r doing well.
I am getting the an error while doing Test configuration in ID.
I am getting the error in the step 'Interface determination & mapping' -> Interface mapping.
*Interface Mapping <Not found>*
*Runtime error*
*com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MTO_MTI_MM_: RuntimeException in Message-Mapping transformatio~*
I have succesfully tested both the msg mapping and interface mapping in IR
Please help me out.
The following is the entire stack trace
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace> <Trace level="1" type="T">Interface Mapping http://debansu.com MIOA_MIIA_MI </Trace> <Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MTO_MTI_MM_ </Trace> <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:286) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) </Trace> <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MTO_MTI_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd </Trace> <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MTO_MTI_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:286) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) </Trace> <Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>

hi Debansu Sarkar .
let do this:
copy the structure from IR to test configuration, also be sure you put all right parametes like, BS and MI.
in test configuration, the fist step you configure the sender agreement, there, put the BS an sender MI, after put the payload and run test.
see this blog
Test Your XI Configuration With The New Test Tool
thanks
Ps: Reward points if usefull

Help On New "Test Configuration Tool"

I am testing a simple Configuration Scenario using Test Configuration in Integration Directory.
I have Given the Necessary Header Information along with the Payload (From SXMB_Moni).
The Execution stops at the interface Determination and Mapping step with an Error Symbol.
The Log Doeen't show Any entries for this neither does the Table in Results Tab show any entry.
Any clues??

hi,
you don't see any entries in the table at all?
if you see only the header error
you need to click on it to see the details
have alook at the link below to find the Error Log tab and how to:
"expand the trace (icon ) and display the individual trace entries." <- from help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/6b/874a4273bb3830e10000000a155106/content.htm
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Test configuration in PI 7.4

Similar Messages

Maybe you are looking for