Test Connection fails for VC system of type Web Service

Hi All
I ve created a VC system of the type Web Service in Portal. In this VC system, I have given Url of the Enterprise Service that I want to use in VC.
(for eg: http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800)
In the next step, I did user mapping for the VC user that will be consuming this Enterprise Service.
The system was created successfully but when I did Connection Tests , I got the following exception:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Do I need to do any more configurations before I can use such ES portal system in my VC work studio ?
I understand that I have provided little information about the exception thrown by Portal.
I kindly request you to feel free in asking any other details about the same.
Regards
Kapil S Kamble

Hi Natty
thanks for your immediate reply.
I followed your instructions and created iView of the type URL and set the fetch mode property to 'server side' as told.
Initially, I gave 'http://www.sap.com' as the Url and I was successful in opening the site.
Later, when I gave Enterprise Service url and tried to preview the iView, I got the following exception:
*'http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800
Error # 401'*
I ll need to give username and password. But how do i give them as parameters?
Please note, these parameteres are appended to the Url. So, I fear that if url of Enterprise service is changed, then it wont open.
what do you think ?
Kapil

Similar Messages

Test connection failed for resource(s): AD: == No route to host\n

Hi, First of all I would like to tell you that the application was running fine few days back, this issue has come suddenly.
I am getting following error while doing connection test for AD with SUN IDM:
Test connection failed for resource(s): AD: ==> No route to host\n
and when I try to open the detail for windows active directory arrow mark from the resource tab, Its giving me below error:
Error iterating over objects ==> com.waveset.util.WavesetException: ==>java.net.NoRouteToHostException: No route to host
I tried to google on this but all are pointing to some network/firewall problem.
Can anybody suggest me the correction ways to resolve this problem. Any idea how I can proceed further.
Thanks,
Jimmy

First of all, I dont know if you even done the proper fault elimination
No route to host is indicative of a network problem that could be based on several different faults.
Simplest way to check, log in to the system running your IdM.
first check if your nameservice is working
nslookup <your fully qualified hostname for the AD gateway>
idmmgr@unix103a:$ nslookup idm-gw.company.com
Server: 139.188.2.1
Address: 139.188.2.1#53
idm-gw.company.com canonical name = win050a.company.com.
Name: win050a.company.com
Address: 171.39.88.145if you get the right response there
try pinging the returned address
idmmgr@unix103a:$ ping 171.39.88.145
171.39.88.145 is aliveIf you have a routing problem it will probably show above...
if the route to the gateway works, it might be the gateway that cant talk to the AD
Just follow the track manually and if it stops working from one point, go past that point (if you can) and see if it works beyond it.
Either way, whatever resource is pointed out in the connectinfo in the pertinent adaptor or connector should work from the prompt of the system running it, if not, then you can start unraveling it from there.

Portal Test Connection Failed for JDBC Connector

Hi,
We are trying to create a JDBC system in EP to connect SQL Server 2005 database. Our aim is to build a model in VC using data services from SQL Server 2005.
We deployed the Driver file sqljdbc.jar and connection was successful when tested by creating a data source in Visual Administrator-> JDBC Connector
We have created a system in EP with user mapping type (admin,user) and user mapping also done for system alias with the SQL Server administrator user id and password. UME is maintained in ABAP Stack. When we try for test connection with the system created in EP for JDBC connection, the system throws an error message like Connection failed. Make sure user mapping is set correctly and all connection properties are correct
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back end application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
The following are the URL and driver class name:
URL: jdbc:sqlserver://<host_name>:1433;DatabaseName=db_ name
Driver class name: com.microsoft.sqlserver.jdbc.SQLServerDriver
Is there any other setting to be maintained in the Visual Administrator or in the Portal?
Kindly let us know any clue to overcome this issue.
Quick response highly appreciated.
Regards
Saravanan.r

Hi Saravanan and Sathish,
not sure how far you got with this. I had the same problem or at least a very similar one with access to MS SQL Server 2005 and solved it. I followed essentially very similar steps with a couple of minor twists:
1) copied the sqljdbc.jar file to the storyboard server and set the classpath environment variable to point to it.
2) I did not create a data source, just created a new driver "SQLServer".
3) Under Connector Container I cloned SDK_JDBC as "SDK_SSQL".
4) The Visual Composer property vc.bi.sqlEditor Enabled should be set to true for you to be able the SQL Editor in the Data Service in VC.
In the portal I created a system of type BI_JDBC from a template.
The connection url and driver class were as in the thread:
URL: jdbc:sqlserver:ipaddress:1433;DatabaseName=name
Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
ConnectionFActoryClass as above under 3.
User rights: admin,user
The user mapping to the system alias should be as described.
This should allow you to use the data service in VC to access SQL Server tables. If access to stored procedures (sometimes quite useful) is required, this would need to utilise the p9sqlserver.jar file already on the server.
Best Regards
Felix Logemann

Jdeveloper 10.1.3.4 Test Connection failed for BPEL Process Manager.

Application Server: OK
BPEL Process Manager Server: FAILED
ESB Server: OK
Verified and tried below steps:
1. hw_services and orabpel and deploy_services are up and running
2. Jdeveloper and Oracle SOA Suite Version is 10.1.3.4
3. Tools->Preferences -> Web Browser and Proxy is disabled.
4. Restarted hw_services and orabpel via Application server control for OC4J_SOA > hw_services/orabpel
5. Able to connect the bpel process manager(BPELConsole) from Browser.
6. But Not able deploy using ant tool as well as with Jdev Deploy option(no domains are displayed under deploy option in Jdev)
7. Ant deployment throws error,
A problem occured while connecting to server "testinstance.com" using port "7777": <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>404 Not Found</TITLE>
</HEAD><BODY>
<H1>Not Found</H1>
The requested URL /integration/services/deploy/deployHttpClientProcess.jsp was not found on this server.
<HR>
<ADDRESS>Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server Server at testsoa.art.com Port 7777</ADDRESS>
</BODY></HTML>
Went thru many threads under soa/bpel forums and couldn't find it worked.
Appreciate your help

Application Server Test Passed
BPEL Identity Service Failed
BPEL Domains Not Run
BPEL Server Mode Not Run
BPEL Notification Service Not Run
BPEL TaskManager Service Not Run
ESB Connection Passed
When I select "BPEL Identity Service Failed" the error displayed as is below. But for the Not Run components it says "Not Executed".
java.lang.Exception:Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "ORABPEL-10555
Identity Service Configuration error.
Identity Service Configuration file has error.
 at oracle.tip.pc.services.identity.config.ISConfiguration.load(ISConfiguration.java:277)
 at oracle.tip.pc.services.identity.config.ISConfiguration.<clinit>(ISConfiguration.java:94)
 at oracle.bpel.services.workflow.task.impl.WorkflowUtil.setUserNameCaseSensitiveFlagOnServer(WorkflowUtil.java:1193)
 at oracle.bpel.services.workflow.task.impl.TaskService.<init>(TaskService.java:196)
 at oracle.bpel.services.workflow.task.impl.TaskService.<clinit>(TaskService.java:153)
 at oracle.bpel.services.common.InitializeServlet.init(InitializeServlet.java:56)
 at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
 at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4830)
 at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
 at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
 at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
 at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
 at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
 at com.evermind.server.Application.getHttpApplication(Application.java:586)
 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
 at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
 at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
 at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
 at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
 at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
 at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
 at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
 at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.xml.parser.v2.XMLParseException: Start of root element expected.
 at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
 at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)
 at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
 at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:291)
 at oracle.tip.pc.services.identity.config.ISConfiguration.parseDocument(ISConfiguration.java:339)
 at oracle.tip.pc.services.identity.config.ISConfiguration.load(ISConfiguration.java:259)
 ... 23 more
Exception: ORABPEL-10555
Identity Service Configuration error.
Identity Service Configuration file has error.
Handled As: oracle.tip.pc.infra.exception.PCRuntimeException

IDM Demo always reports connection failed for Solaris target

I'm setting up the IDM Demo, using the Setup Wizard, using a Solaris 10 container as
the target system. For this demo, I'm using telnet directly as root, which seems to be
the only method available. This succeeds when I run telnet by hand from the IDM host
to the target host. When I test the connection from the wizard, after a long delay, it
always reports that the test connection failed. However, the console log on the target
system shows a successful login. The Details button says that it was looking for `_.)#+(:',
regardless of what I specify as the `Login Prompt'. (I assume this really means the shell
prompt.) I've tried changing the shell prompt by setting PS1 in /.profile and tried suppressing
the banner by creating a /.hushlogin file. Still, the test button always reports that the
connection failed. What's wrong here?

ah, familiar territory :)
the string _.)#+(: is something that the adapter uses as a suffix to check whether the previous command executed has changed state or not. The assumption being that _.)#+(: will not be encountered as output of any command on Solaris.
1. Try connecting as root
2. Whats your IDM version?
3. Try this: login as root over putty, and paste whatever strings you get into the adapter configuration page on IM (for say, prompt, etc.)
4. Tracing the following variables can give you better details regarding where its getting stuck:
com.waveset.adapter.SolarisResourceAdapter
com.waveset.adapter.SVIDResourceAdapter
com.waveset.adapter.ScriptedConnection
Hope this helps!
Ankush

IWeb Test Connection Fail

Hi Folks, I am sure that their have been a million questions on this subject on the Test Connection failing when testing your connection to the host.
I am not sure if a solution has been found. I am having this problem and need a solution. I would like to publish through the iWeb FTP page as this is a very simple process. I tried to publish via Cyberduck and this worked ok. However the simplicity of the iWeb publisher is what intrest's me.
Does anybody know of a solution?
Many thanks
Paul

Yes, there are a million questions about this.
This is the usual answer :
When iWeb tests the connection, it tries to write a file on the server based on the server settings you provide.
When it can write, the test is ok.
It does not mean that it is the right location where you should publish your webpages. Only that the location is writable.
If the test fails, it's usually the pathname that is wrong or incomplete. See the FAQ where you host your website to learn what the correct pathname is.
If you already have a website, check the settings of that website and use those.

Error: Error #2170 Connection Type: Web Service

Hi all,
In BO I have changed the external address on DNS say abc.com
Now when I try to access the dashboard internally it gives the error trying to access xyz.com which was previous external ip.
The error I get is
To access external data, add a cross-domain policy file to the external data web server.
For more information, on the Adobe website, see the article "Cross-domain Policy File Specification".
If the problem persists, contact the file creator or your system administrator.
Error: Error #2170
Connection Type: Web Service
File URL: http://abc.com...
External Data URL: http://xyz.com...."

May be in connections, you have hardcoded the server as xyz.com. It is always advisable to use relative url so that the servername and port is resolved in runtime.
Also, check in CMC > Applications > Web Service > Properties what is the server name specified ? Is it still the old one ?

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.

Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions?

Urgent: Calling a WebLogic document type Web Service

We have created an one-way, document type web service that works fine with the
clientgen client. When sending the same SOAP message to the service from another
client, it fails with: javax.xml.soap.SOAPException: failed to receive message:
The other client recieves an HTTP 500.
The signature for the service method is:
public void getDiag(Diagnostic diag)
Diagnostic is a complex type generated by autotype from a schema.
The failing client builds the SOAP message and sends it to the WebLogic service
using HttpURLConnection with the request method set to POST and content-type to
text/xml.

Is there any error on the server?
Did the method on the end componet invoked?
If you are using WLS 8.1, its better to use SAAJ
instead of plain http url connection. Something like:
SOAPConnectionFactory factory =
SOAPConnectionFactory.newInstance();
SOAPConnection connection =
factory.createConnection();
SOAPMessage response =
connection.call( request, targetURL );
Here is a working example:
http://manojc.com/?sample23
RouterHandler.java
Regards,
-manoj
http://manojc.com
"Steve Watson" <[email protected]> wrote in message
news:3ec13eeb$[email protected]..
>
We have created an one-way, document type web service that works fine withthe
clientgen client. When sending the same SOAP message to the service fromanother
client, it fails with: javax.xml.soap.SOAPException: failed to receivemessage:
>
The other client recieves an HTTP 500.
The signature for the service method is:
public void getDiag(Diagnostic diag)
Diagnostic is a complex type generated by autotype from a schema.
The failing client builds the SOAP message and sends it to the WebLogicservice
using HttpURLConnection with the request method set to POST andcontent-type to
text/xml.

Requirements for the development of ABAP web services...

Recently at TechEd in Vienna I saw a demo of the development of an ABAP service. It all looked fairly easy, so when I came back I decided to try it out for myself. However, this mission seems to be compromised by the development environment not playing along. I've tried to encapsulate a small RFC function module inside af service on an IDES ECC 6.0 system and that went fairly well until I wanted to test the service.
At some point it is understood that one should setup a reference to a J2EE system in the WSADMIN transaction and that caused me some troubles as it looks like the IDES system that I tried it on doesn't have a java stack. How could I check whether that is true? I then tried to test the service directly under maintain service within WSADMIN and it sends me a popup screen and asks me to logon. After logging on the browser claims an internal error has happened.
What do I do now? Where do I start to check if everything is setup the way it should be? Is there a note or a how to guide somewhere?
Best regards,
Anders

Hello,
For creating and hosting ABAP web Services, you do not need JAVA stack. However, for testing Web Services using Web Service Navigator (from SOAMANAGER), you need J2EE stack.
If you are invoking Web Service from SOAPUI, .NET or some other third party tool, you need to create End Point for the service using SOAMANAGER and provide the Porttype WSDL to the third party system.
Thanks,
Venu

Return type Web Service

Hello,
I have a web service created in Java:
@WebMethod
public Vector<Data> getData();
This is how I am connecting to the web service:
public function connectWS():void{
 var cr:CallResponder = new CallResponder();
 cr.addEventListener(ResultEvent.RESULT, connectWSResult);
 cr.token = myWebService.getData();
My vect variable above does not provide me with the correct Data object. vect is assigned null. How ever if I have:
public function connectWSResult(event:ResultEvent);void{
 var arrCollect:ArrayCollection = event.result as ArrayCollection;
arrCollection gives me correct value of Data object.
I want the webService to return me a Vector. How can I go about that?
-H

If I understand you correctly (do not see a 'vect' variable anywhere), the web service is working perfectly. The getData() function is non-blocking and does not "wait" for the response from the web service. This is why you need to add an event listener, to listen for the "result" event. When the reply comes in, the listener triggers the handler (connectWsResult) which you appear to have defined correctly.
So I'm not sure what the problem is if you say the handler is returning the correct data. Am I missing something?

Do we need the Loadrunner vuser type "web services"?

We are planning to benchmark XI 3.1 using Load runner scripts.
Do we need the Loadrunner vuser type "web services" to benchmark XI 3.1 with SAP Portal, Infoview, Xcelsius, Live Office, and QAAWS?
NOTE: Our customer is using Xcelsius Dashboards against WebIntelligence latest Instances.
Regards,
- Gabriel

Apache is a webserver, Tomcat is a "servlet-container", which it not a webserver. For fast setup, you can develop your Java-web-app with only Tomcat, which saves you the hassle of configuring AJP13 connectors... But they are significantly different....

Need help with DOC type web service

hi,
I am trying to write a simple message style ( doc type ) web service but no success so far. I have tried to search for examples but no use. I already implemented some simple RPC style web services like calculator etc and able to use them. I am more interested in the DOC type ( which sends SOAP message and receives SOAP message back). Can Anybody give me an example for implementing this type of service ( very-simple say HellowWorld ) or point me to some website . I am not able to generate the response envelope. I can write the client program which will send a SOAP Envelope to this services with one parameter NAME and the services should return Hello Name but in a SOAP envelope form. I can create a SOAP message in this Client using SOAPConnection and MessageFactory etc. Your help will be really appreciated. There is very little stuff about webservices on the internet as well on this forum.
Thanks
Vinod

Hello kwilding2,
Thanks for the quick response and pointing to some useful websites. I downloaded the code from web service essentials BUT all the examples are using SOAP RPC calls. They create a call object and call one of the service methods and a response is returned. I am little confused about this stuff. I am looking for something which returns the response in a SOAP envelope for which i think i need to use JAXM API which I already have downloaded. I have created a client which composes a SOAP envelope using SOAPConnection and other MessageFactory classes etc and can send this SOAP envelope to a web service. In return I want the web service to give the SOAP envelope.
I have gone thru xmethods.net and picked the following stock quote request and response:
Sample Request envelope:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body>
<ns1:getQuote xmlns:ns1="urn:xmethods-delayed-quotes" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<symbol xsi:type="xsd:string">IBM</symbol>
</ns1:getQuote>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Sample Response Envelope:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body>
<ns1:getQuoteResponse xmlns:ns1="urn:xmethods-delayed-quotes" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<return xsi:type="xsd:float">133.625</return>
</ns1:getQuoteResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I also want the things in this order. This webservice at xmethods just returns the price for a stock, so how they say it returns this Response Envelope. Is this Envelope something implied. I am getting more confused.
any help will be appreciated.
Thanks
Vinod

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

Adding new Remote System unavailable in Web Service Request

Hi,
I created a CRUD Web service from a table using web service generator.I added a new remote system to the repository.When I invoke the create operation (which has key mapping "Yes"),it says "Remote System not found in the repository"
I am able to view the Remote System via Data Manage though.
Any ideas?
Regards,
Premjit

Hi Premjit,
When did you added new remote system?
Before generating web services.
Or After generating web services.
If you have added remote system after generating web services.
Then try re-generating web services using web service generator.
Regards,
- Shailesh

Test Connection fails for VC system of type Web Service

Similar Messages

Maybe you are looking for