Test connection for LDAP resource?

I am running IDM 7.1 on RHEL 4 and set up various resources. I set up a database resource and entered the resource parameters, clicked test configuration, got an error, corrected the parameters, clicked test configuration and got a "test connection succeeded for resource" notification. However when I set up an ldap as a resource, and enter parameters for host, port, and password I get a test successful notification even when the parameters are incorrect. In fact if I leave the defaults below of localhost and the password is blank I get a test successful. Anyone else experience this issue?
Host LOCALHOST
TCP Port 389
SSL 0
Failover Servers
User DN CN=DIRECTORY MANAGER
Password
Base Contexts O=COMPANY
Object Class TOP PERSON ORGANIZATIONALPERSON INETORGPERSON
LDAP Filter for Retrieving Accounts
Include All Object Classes in Search Filter *CHECKED
User Name Attribute UID
VLV Sort Attribute UID
Use blocks 1
Block Count 100
Group Member Attr UNIQUEMEMBER
Password Hash Algorithm
Change Naming Attr 0
LDAP Activation Method
LDAP Activation Parameter
path C:/TEMP/LDAP1.XML

Are you using the right class file for the LDAP adapter? Make sure you are not using the simulated adapter...
Look at your LDAP resource xml object to see if is set to com.waveset.adapter.LDAPResourceAdapter.
In some cases you will get a successful test on an adapter, but you may have one configuration parameter incorrectly configured. So, the adapter connects, but will not function properly. Look at things like base context, objectclass, etc...
I have had this happen before and it is frustrating because you are just missing one attribute or fat fingered an attribute name.

Similar Messages

ISATAP Router connectivity for INTRANET resources...they still show fe80 addresses.

So, in following various troubleshooting documents, it has led me to this point.
I worked through the article DirectAccess Client Cannot Access Intranet Resources, which led me to the section
To troubleshoot why an intranet ISATAP host does not configure an ISATAP address because the intranet resources I've allowed both show a fe80 ipv6 address (meaning they are not getting configured via the ISATAP router).
I was able to walk through all of its steps without errors. I did have to alter it slightly as I'm not using ISATAP fully, but limited mode with a custom ISATAP DNS name that is pointing to the DA server internal IP address.
The next section in the article To troubleshoot an ISATAP router is where I run into issues. I go through the process, using my customized ISATAP name, which pings, etc. I get to step 8 and this is where it goes off the rails.
I do a netsh interface ipv6 show interfaces. I have TWO interfaces with the name isatap.longstringoflettersandnumbers
which each represent one of the two NICs in the server (One public one internal). The document states it should be the intranetDNSSuffix. So, I added the DNS Suffix to both NICs, rebooted the DA Server.
Question, should these be listed as isatap.something or should they be my custom isatapname.something?
My understanding is ISATAP.DOMAINsuffix is blocked globally by default unless I unblock it (which I haven't). I'm using a custom ISATAP name, lets say customISATAP.DOMAINSuffix. I have a GPO setup to enable ISATAP and point them to my custom
ISATAP entry for restricted systems. I can verify they get those settings because their isatap state is enabled and they have the custom isatap as their router.
But...they are not getting routable ipv6 addresses.
My configuration is as follows:
NLS - 2012 R2 Server
DA - 2012 R2 Server with Win 7 access turned on. Dual NIC, one internal and one external. External points to a F5 then out to the wild. Dashboard shows all green for status in my DA.
PKI - Setup and configured. Certs assigned (I believe, but I don't think Certs will stop ISATAP from assigning the correct ipv6 IP)
Win 7 Enterprise Test DA client - Can connect, shows as connected, but only resources I can get to is the domain controller, I can access the sysvol and netlogon folders. I cannot access other intranet resources.
Thanks for any assistance.

Hi there - it is a recommended route to not use ISATAP as Matt suggested. The option / process I use which always works is to use a management server with a static ipv6 address (read native ipv6 as recommended). The easiest way is as follows. Go to your
configured DirectAccess Server and note the IPv6 address ending in 3333::1 . Now go to your management server and open up your LAN connection. Let's assume your management server is on 192.168.1.10. Open the ip6 tcp properties and add a static ip6 address.
Paste the ipv6 address from the DA Server in and change the last digit (3333::1) to 3333::10 to match the ipv4 digit. Set the mask to /64 /96 or /128 as per the DA Server. Paste the ipv6 address of the DA Server as the default gateway . Leave DNS Alone. Then
go back to the DA Server choose infrastructure and remove your management server. Apply the settings to write the GPO. Re-Add the management server and apply the GPO. Then reboot the management server, check DNS for an ipv6 address and you are good to go.
john davies

Bulk password reset for ldap resource

Hi
I have configured 200 no of LDAP resources in my local IDM.but when I am trying to reset password of these resources by bulk action update
using this command
command,resourceType,resource,resourceAttributes[credentials].value
Update,LDAP,openDJ11,password
then I am getting the below error
java.lang.IllegalStateException: Error attempting to decrypt: Input length not multiple of 8 bytes
any suggestion will be apriciated. thanks in advance

Hi dhurgan,
Thanks for your response.
Yeah firstly i was passing plain text but as the credentilas field of LDAP is of type "guided string" so it was gicing the above error.
But when I try with the encrypted value then i am getting incorrect credentilas meggase because the encrypted value of a plain text
is genarated dynamically.

Connection problem while connecting to LDAP resource via SSL

Hi,
I am facing problem in connecting LDAP via SSL. I got the self signed certificate from the LDAP team and while importing it to the JVM keystore using command "keytool -import -file PathTo/ds-cert.txt -keystore ./cacerts -storepass changeit -trustcacerts", I am getting error "keytool error: java.security.SignatureException: Signature does not match". Since I am not able to import the cert, I am facing problem in connetcing to LDAP via SSL. I have gone thru other posts and found some answers for it.. but not able to do it correctly. I am using SIM 7.1 and tomcat. In some posts, I have seen, in the resource config wizard, use "true" instead of 1 in the SSL field.. For SIM 7.1, does the value 1 work?. Please help me in importing the cert to my local JVM keystore.
Thanks.
Edited by: dj123 on Oct 15, 2008 1:50 PM

Make sure you are importing the certificate of the issuer (CA) that issued the LDAP certificate, not the LDAP cert itself.

Necessity of a test connection to succeed for unlinking

Is it necessary for test connection to the resource succeed for unlinking a user from a resource?
I find that my test connection fails but i want to unlink the user from the resource. Is there any other alternative?
Yash
Message was edited by:
yash@IDM

You can only unlink the user from the resource if the resource is directly assigned. If you use roles or resource groups then unlinking might fail.
And no there is no resource action needed this is an IdM internal thing.
WilfredS

Connect various ADs Resources with an only Gateway

Hi!
---->My architecture is the following:
- Two different ADs installed in three Microsoft Windows Enterprise Server 2003. (AD1.com, AD2.com).
- AD1.com and AD2.com are trusted domains.
- One Identity Manager 7.1 in another server (this server is not includen in any domain above)
- Gateway running on Server with domain AD2.com. (Port 9278)
----> Configuration in Idm 7.1 Resources Option:
Server: Gateway IP (AD2.com server)
TCP:9278
User: admin
Password: admin
Object: User:
Container: DC=AD2, DC=com
LDAP SERVER NAME = AD1.com name or IP
(Rest of options are default)
User "admin" belongs to AD2.com domain with Administrator privileges.
-----> Then, when I test configuration, it prints the following error:
Test connection failed in Resources:
AD: Error opening object 'LDAP://DC=AD2, DC=com': ADsOpenObject(): 0X8007202B: , 0000202B: RefErr: DSID-031006E0, data 0, 1 access points ref 1: 'AD2.com' , Server has returned a reference.
---> Question:
I have various Active Directories but I only want to have a Gateway that to connect to them.
What's wrong?
Thanks a lot.

Thank you for your response, Rob:
I have an error in text above in Contaner field.
----> Configuration in Idm 7.1 Resources Option:
Server: Gateway IP (AD2.com server)
TCP:9278
User: admin
Password: admin
Object: User:
Container: DC=AD1, DC=com
LDAP Server: IP (from AD1.com server)
So, if there are two ADs (AD1(gateway installed),AD2(not gateway installed) and I want to connect to resource AD2 through gateway in AD1, I have to configure Resource page as above I have written, haven't I?
Otherwise, I have been using a LDAP browser (softerra) Can I connect to a AD2 in this way?
ldap://Gateway_ip:9182/CN=Users,DC=AD1,DC=com
Thanks a lot, Rob.
Ivan

Test Connection in SLD fails.

Hello,
When I test connection for SLD in content administrator (web dynpro), I get
Connection to SLD could not be opened successfully.
And when I open a web dynpro that uses RFC I get an exception.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_WATCH_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD.
what could be the issue.
Thanks
Tony

Hi Tony,
Configure your SLD and then create the JCO Destinations.
Check the following document which clearly explains the process of System Landscape Directory and JCo Configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
Thanks & Regards,
Jhansi Miryala

SQL Developer 1.5.1.54.40 Test Connections fail

Test connections are failing unless the connection is saved first..Is this a feature?

Not seen anything like that with a valid userid/pass being reported as incorrect when testing. Testing connections for me is correctly reporting invalid userid/pass when password is invalid and reporting success when password is valid. I also cannot connect if I have an invalid password.
It appears that the Connect has an implicit save, so without selecting Save they are still saved to disk in the standard connections file.
theFurryOne

Error Message Prompt when test connection

Hi All,
In order to setup the B1i Integration for SAP 2005A PL46,i had install the following program:
a) j2sdk-1-4-2
b) j2re-1-4-2
c) sqljdbc_1.2.2828.100_enu.exe
d) Tomcat apache 5.0.30
After install the above program, i used eventSender to setup & test the connection to B1iServer. The connection was successfully.
When i try to login the administration --> Landscape
Click the 'test connection' for the database, the following message display.
Connected to database_name failed.
"com.sap.b1i.xcellerator.XcelleratorException: XCE018 IPO-Step is missing in IPO-Step URI ipostep:/0010000101.outbound/ipo.com.sap.b1i/P08/P08.ipo/#Xs() "
Any advise for the message?I had try reinstall the program. The same error message appear again. Anybody who know what happen? Thanks.
Regards,
Eric Tan

Hi Eddy,
Yes,i had been install Client DI API for PL46. The path JCO path as "C:\Program Files\SAP\SAP Business One DI API\JCO\LIB". There have 4 four files insides included as below:
a)sboapi.jar
b)sbowrapper.jar
c)sbojni.dll
d)sbojc.sda
The JCO path in the landscape setup for B1 is correct as well. Any other reason?
Regards,
Eric Tan

B1if B1DI Test Connection

Hi,
I am not able to connect successfully B1DI Test connection for SAP B1 SLD.
Its give me below error.
"com.sap.smb.sbo.wrapper.com.ComFailException: Can't map name to dispid: Connected"
I already uninstall & install again B1if Framework.
Thanks,
Tushar

Hi Radek,
I have faced this issue only for B1DI Connection for all B1 System.
Yes I tried with delete temp folder but i will try with reinstall of DI API & let you know.
Thanks,
Tushar

LDAP access info in datasource xml file for multidomain Test Connect fails.

Hello SDN
I've gone through the video that explains how to setup the multidomain conf.
I have my service users but when it comes to enter the ldap access user I'm not sure what info to enter.
My ldap user is created at the company.com level not at the domain1.company.com level as is indicated in the video.
I entered the following values
ume.ldap.access.server_name> server1
ume.ldap.access.user> [email protected]
ume.ldap.access.base_path.user> CN=USERS,DC=COMPANY,DC=COM
ume.ldap.access.base_path.grup> CN=USERS,DC=COMPANY,DC=COM
And when I try to test connection I'm getting an error. So I have two questions:
Should the ldap account be created at the domain1.company.com level?
And how do I get the correct info to populate the base_path fields? Not sure where to get it, I just followed video.
Thanks for any help.
MR

Couple of things.,
1. What LDAP you are using
2. What kind of hierarchy (flat or deep)
The hierachy will decide the user path and the group path.
Given you have all the right values then you populate the values for the foolowing.,
- Server Name or IP
- Server port number
- LDAP user name by (used for connectivity and access which should have enough rights)
- Password for the LDAP user
- User path
- Group path
With all the above given right the test connection should succeed.
Optionally SSL can be enabled for LDAP connectivity and can specify unique attribute for UME unique ID (this field will be uid for SUN LDAP and samaccountname for MS AD)
Regards,
Muthu Kumaran KG

Test connection failed for resource(s): AD: == No route to host\n

Hi, First of all I would like to tell you that the application was running fine few days back, this issue has come suddenly.
I am getting following error while doing connection test for AD with SUN IDM:
Test connection failed for resource(s): AD: ==> No route to host\n
and when I try to open the detail for windows active directory arrow mark from the resource tab, Its giving me below error:
Error iterating over objects ==> com.waveset.util.WavesetException: ==>java.net.NoRouteToHostException: No route to host
I tried to google on this but all are pointing to some network/firewall problem.
Can anybody suggest me the correction ways to resolve this problem. Any idea how I can proceed further.
Thanks,
Jimmy

First of all, I dont know if you even done the proper fault elimination
No route to host is indicative of a network problem that could be based on several different faults.
Simplest way to check, log in to the system running your IdM.
first check if your nameservice is working
nslookup <your fully qualified hostname for the AD gateway>
idmmgr@unix103a:$ nslookup idm-gw.company.com
Server:         139.188.2.1
Address:        139.188.2.1#53
idm-gw.company.com canonical name = win050a.company.com.
Name:   win050a.company.com
Address: 171.39.88.145if you get the right response there
try pinging the returned address
idmmgr@unix103a:$ ping 171.39.88.145
171.39.88.145 is aliveIf you have a routing problem it will probably show above...
if the route to the gateway works, it might be the gateway that cant talk to the AD
Just follow the track manually and if it stops working from one point, go past that point (if you can) and see if it works beyond it.
Either way, whatever resource is pointed out in the connectinfo in the pertinent adaptor or connector should work from the prompt of the system running it, if not, then you can start unraveling it from there.

How to test the OID IT Resource connection

Hi,
I am trying to test the connectivity of the OID IT Resource in OIM. Could somebody help me in knowing how to test the connectivity of the resource.
Regards,
Nitin

Hi Suren,
I am not using any Ldap browser. I am using Oracle Directory Manager.
I tried giving the following value in my searchfilter (objectclass=top)(cn=HPOONIA).
But I am getting the following errors :
Parameter Variables passed into com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:tcUtilLDAPOperations(): Login Variables are:: are sServerName = 129.146.14.92, sPortNo = 389, sPrincipalDN = cn=orcladmin,cn=Users,dc=csc,dc=com, sProviderURL = ldap://129.146.14.92:389,
INFO,09 Apr 2010 04:40:09,317,[XL_INTG.OID], Parameter Variables passed into com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:tcUtilLDAPOperations(): Login Variables are:: are sServerName = 129.146.14.92, sPortNo = 389, sPrincipalDN = cn=orcladmin,cn=Users,dc=csc,dc=com, sProviderURL = ldap://129.146.14.92:389,
DEBUG,09 Apr 2010 04:40:09,318,[XL_INTG.OID], Parameter Variables passed into com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:tcUtilLDAPOperations(): Login Variables are:: for isSSLEnabled = false
DEBUG,09 Apr 2010 04:40:09,318,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : tcUtilLDAPOperations():: FINISHED
DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : processChange():: STARTED
DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : checkEmpty():: STARTED
DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : checkEmpty():: FINISHED
DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : checkEmpty():: STARTED
DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : checkEmpty():: FINISHED
DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : getSearchAttributes():: STARTED
DEBUG,09 Apr 2010 04:40:09,323,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : getFieldMappings():: STARTED
DEBUG,09 Apr 2010 04:40:09,323,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : getSearchAttributes():: FINISHED
DEBUG,09 Apr 2010 04:40:09,323,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : connectToAvailableOID():: STARTED
DEBUG,09 Apr 2010 04:40:09,323,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : hashTableEnv():: STARTED
DEBUG,09 Apr 2010 04:40:09,335,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : hashTableEnv():: FINISHED
INFO,09 Apr 2010 04:40:09,335,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : connectToAvailableOID() : SSL option is not selected in ITResource
DEBUG,09 Apr 2010 04:40:09,348,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : connectToAvailableOID():: FINISHED
DEBUG,09 Apr 2010 04:40:09,348,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : doReconSearch():: STARTED
DEBUG,09 Apr 2010 04:40:09,349,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : isPagingSupport():: STARTED
DEBUG,09 Apr 2010 04:40:09,353,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : isPagingSupport():: FINISHED
DEBUG,09 Apr 2010 04:40:09,353,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch():: STARTED
DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : Parameter Variables passed are: pSearchBase = [cn=Users,dc=csc,dc=com], pFilterExpression = [(&(objectclass=top)(cn=HPOONIA)(modifyTimestamp>=19000101010001Z))], pIsRelative = [true], pAttrNames = [[Ljava.lang.String;@3250b1]
INFO,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : Parameter Variables passed are: pSearchBase = [cn=Users,dc=csc,dc=com], pFilterExpression = [(&(objectclass=top)(cn=HPOONIA)(modifyTimestamp>=19000101010001Z))], pIsRelative = [true], pAttrNames = [[Ljava.lang.String;@3250b1]
DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : javax.naming.directory.SearchControls@14fa707search controls**********************
DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : count limit**********************
DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : subtree scope**********************
DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : setting returning attributes if NOT NULL**********************
DEBUG,09 Apr 2010 04:40:09,370,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : DID NOT FIND ANY RECORDS after Modified Time Stamp
DEBUG,09 Apr 2010 04:40:09,370,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : parseControls():: STARTED
DEBUG,09 Apr 2010 04:40:09,370,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : getControlInstance():: STARTED
DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : getControlInstance():: FINISHED
INFO,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : parseControls() : >>Next Page
DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : parseControls():: FINISHED
DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : cookie: [B@5eef81
DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : cookie length : 0
DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : Total No Of Records are reconciled are = 0
DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP():: STARTED
DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP() : Closing initial directory context
DEBUG,09 Apr 2010 04:40:09,380,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP():: FINISHED
DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch():: FINISHED
DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : doReconSearch():: FINISHED
DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP():: STARTED
DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP() : Closing initial directory context
DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP():: FINISHED
DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : processChange():: FINISHED
DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : execute():: FINISHED
Please help.
Regards,
Nitin

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

Where are you hosting the site a what are you using to upload the site files to the server?
OT

Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ

Test connection for LDAP resource?

Similar Messages

Maybe you are looking for