Test Data Gerneration for BAPI "BAPI_PO_CREATE1"

Hi All,
We need to debug the BAPI "BAPI_PO_CREATE1" in ECC(6.0) , since we need to test data we tried to use the Report
"FBGENDAT" and we set the parametes FBGENDAT to 'X' in the SU01 also. but we are not able to get the test data in ECC for the BAPI.
Can any one know what would be the problem
Regards
Channappa Sajjanar

Hi Channappa,
Please follow the steps described under the chapter FBGENDAT:
http://wiki.sdn.sap.com/wiki/display/SRM/Shoppingcarttransfer
and go through the steps of the note 539978 again.
Important that you:
- execute the report FBGENDAT with the parameter A or B, and fill the function name BAPI_PO_CREATE1 into the input field
- check if indeed you have set the FBGENDAT=X for the RFC user.
Regards,
Peter

Similar Messages

Test Data Required for Bapi's

Hello All,
I am a newbie to SAP.
I have been tasked with finding the test data for a few BAPi's but have been unable to do so on my own.
I have tried using the respective transactions to find valid test data and have looked at all the imports, tables in the given bapi but have been unable to find the required data.
I am working on ECC 6.0.
I ask all the learned folk out here to please lend your expertise.
The list of BAPI's are :-
1. BAPI_FUNCLOC_GETLIST
2. BAPI_CONTROL_RECEPIE_GET_LIST
3. BAPI_PROCORDCONF_GET_HDR_PROP
4. BAPI_PROCORD_GET_LIST
Edited by: aashrith on Nov 13, 2011 5:03 PM

I suspect that they want you to build some test data rather than find some. And for what you need, there is a lot of master data required. It may or may not be there already, but the task you have defined is not that simple as one or two posts would be required. I would google "SAP PPPI test data" or something similar. You will probably find simple lists of tasks to build a sample Control Recipe or Process Order.
Regards,
Mike

Test Data generator for oracle?

Hi again,
I found a long list of "Test data generators" for oracle by google.Is there anybody there to use some specific product and have nice experience? I have limited time to test them.
-Your help will be so appreciated.

The Oracle provided dbms_random package can be used to help generate test data.
I have found that most test data generation programs are not that useful for generation data in an rdbms environment.
HTH -- Mark D Powell --

Test data generator for Oracle database

Hello.
I'm a student of Computer Engeneering in Poland. I've recently written simple application that can help people to populate database with some simple test data (appliation works only on relational database).
this is link to website: http://testdatagenerator.jak.pl/
Requires: .NET Framework 2.0 and ODP.NET
Every feedback is welcome!

Yes, I know about it...
In Firefox you can easily close the ad (in IE it's a little bit difficult).
Here is direct link to installer (if someone has a problem to handle with ads ):
http://metis.weia.po.opole.pl/~d51422/generatorOracle/setup_ml.exe
(both EN and PL version)

How to create a data filter for BAPI used in a Distribution Model ?

I am trying to create IDOC's for a QM inspection plan via message type QPMK in ECC 6.0. When creating the new message type in the Distribution Model, it forced me to use a BAPI (MasterInspectionChar) rather that just the message as I have done in the past. In order to ensure that only IDOC's related to a specific plant and material type get sent out, I was trying to create a filter.
I am able to get into a 'Change Filter' dialog by double clicking 'No data filter set' under the node 'MasterInspectionChar.SaveReplica'. However, an attempt to highlight anything on this dialog and clicking button 'Create filter group' results in msg. 'Select node: Content-dependent parameter filtering'.
Online help led me in a different direction, one thread led me to believe I needed to create a table entry for the filter in table TBD16 via BD81 for later attachment to the BAPI in the Distribution Model. Before this, I created two Z* ALE Object Type records for plant and material type in table TBD11 via BD95 for what I thought would provide a lookup back in BD81 for creation of a new filter record, but these objects are not found. Per the help, I am also unclear as to whether I would need to set up Receiver determination or Parameter filtering, nor where to make this step in the configuration happen?
Can anyone point me back in the correct direction to get a data filter set up for this BAPI within the Distribution Model ?
Thanks - Mike

Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'. But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter.
I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'. Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI. Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning. Is this warning occuring because of missing configuration?
Thanks - Mike

Transporting BAPi 's Test Data Directory(like Variants), How?

Hi Experts,
I hv created some Test Data Directory elements for BAPi, in DEV, so, now, I wanna to move them to TEST system!
Pls. let me know,
1 - How to get it done? Is there any SAP prog./Transaction/Menu path?
Thank you,

Hi,
In DEV system:
As usual, I entered some inputs in FM screen, then Saved-Floppy them, the system prompted me, to give some name, I hv given my_s_cust_#_1000000 name. So, its stored in TEST DATA DIRECTORY. I hv been used it from TEST DATA DIRECTORY for my trials.
So, now, I wanna to move my_s_cust_#_1000000 to TEST system, How?
Hope U got it!
thanq.

Debuging mapping - error : Could not find test data for target operators ?

Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.

Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help.

How to creat Test Data Directory

Hi Experts,
I want to create a TEST DATA DIRECTORY for the following function module CLOI_CHANGES_UPL_31. How to create this?
Actually now i have some process order numbers. Using this how to create the test data directory??
Plz guide this.
Point will be sure.
Mohana

Hi Mohana,
      Test data directory is similar to variants in reports.
      After executing the function module give some input and click the save button . It will prompt a name . Give the name and click enter. So this test data is saved in the test data directory.
   So that you need not not give the test input again and again. you can simply click the test dat directory and select your test data .
Regards,
Charumathi.B

Test data import

Hi Friends,
is there a way to install or import some test data in a new ECC 6.0 system, like material, customer etc?
Or better, are test data available for this?
It is no Ides installation.
Thanks in advance
Jimbob.

Hi,
What you can do is either do it via eCATT or the better option is get the data into BC-Sets or change requests and move into your system.
Of course the condition is to get a system with such data - just try any of the IDES boxes and it should have.
Regards, Dibya

Test Data Directory

Hi All,
I have a requirement in which I have to test some function modules using the standard SE37 test functionality.
Below is my requirement
1) The test data for the input parameters for these functions is present in flat files.
2) I have to read the data in the flat files and load into the parameters and then update the test data directory for the function modules
Is there any standard function modules that upload parameter data to Test data directory? There are some functions like SFCS_FA_PARAMETER_GET in package SEUJ. But I am not sure how to use them.
If anyone has any idea on how to save the data to test directories, it will be of great help.
Thanks,
Anand

Just enter the values and press save.It will ask for comments enter some name.
When u execute teh FM next time u can take the values from the directory.
Make sure that if u r making some changes in the FM then teh test data wont be available.
reward if this helps.

How to get test data for BAPI_PO_CREATE?

Hi friends,
can anybody please tell me how to generate the test data for BAPI_PO_CREATE?

Hi swetha,
Hi,
You could test this scenario with using the Test Message option from RWB.
Or else
You could design the scenario to get the response from BAPI.
i.e BAPI to XI to File or any other application that will be easily avaialble.
But you need receiver system for testing.
Refer the below link it may help you .
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Regards
Naveen.

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How to generate test data for all the tables in oracle

I am planning to use plsql to generate the test data in all the tables in schema, schema name is given as input parameters, min records in master table, min records in child table. data should be consistent in the columns which are used for constraints i.e. using same column value..
planning to implement something like
execute sp_schema_data_gen (schemaname, minrecinmstrtbl, minrecsforchildtable);
schemaname = owner,
minrecinmstrtbl= minimum records to insert into each parent table,
minrecsforchildtable = minimum records to enter into each child table of a each master table;
all_tables where owner= schemaname;
all_tab_columns and all_constrains - where owner =schemaname;
using dbms_random pkg.
is anyone have better idea to do this.. is this functionality already there in oracle db?

Ah, damorgan, data, test data, metadata and table-driven processes. Love the stuff!
There are two approaches you can take with this. I'll mention both and then ask which
one you think you would find most useful for your requirements.
One approach I would call the generic bottom-up approach which is the one I think you
are referring to.
This system is a generic test data generator. It isn't designed to generate data for any
particular existing table or application but is the general case solution.
Building on damorgan's advice define the basic hierarchy: table collection, tables, data; so start at the data level.
1. Identify/document the data types that you need to support. Start small (NUMBER, VARCHAR2, DATE) and add as you go along
2. For each data type identify the functionality and attributes that you need. For instance for VARCHAR2
a. min length - the minimum length to generate
b. max length - the maximum length
c. prefix - a prefix for the generated data; e.g. for an address field you might want a 'add1' prefix
d. suffix - a suffix for the generated data; see prefix
e. whether to generate NULLs
3. For NUMBER you will probably want at least precision and scale but might want minimum and maximum values or even min/max precision,
min/max scale.
4. store the attribute combinations in Oracle tables
5. build functionality for each data type that can create the range and type of data that you need. These functions should take parameters that can be used to control the attributes and the amount of data generated.
6. At the table level you will need business rules that control how the different columns of the table relate to each other. For example, for ADDRESS information your business rule might be that ADDRESS1, CITY, STATE, ZIP are required and ADDRESS2 is optional.
7. Add table-level processes, driven by the saved metadata, that can generate data at the record level by leveraging the data type functionality you have built previously.
8. Then add the metadata, business rules and functionality to control the TABLE-TO-TABLE relationships; that is, the data model. You need the same DETPNO values in the SCOTT.EMP table that exist in the SCOTT.DEPT table.
The second approach I have used more often. I would it call the top-down approach and I use
it when test data is needed for an existing system. The main use case here is to avoid
having to copy production data to QA, TEST or DEV environments.
QA people want to test with data that they are familiar with: names, companies, code values.
I've found they aren't often fond of random character strings for names of things.
The second approach I use for mature systems where there is already plenty of data to choose from.
It involves selecting subsets of data from each of the existing tables and saving that data in a
set of test tables. This data can then be used for regression testing and for automated unit testing of
existing functionality and functionality that is being developed.
QA can use data they are already familiar with and can test the application (GUI?) interface on that
data to see if they get the expected changes.
For each table to be tested (e.g. DEPT) I create two test system tables. A BEFORE table and an EXPECTED table.
1. DEPT_TEST_BEFORE
     This table has all EMP table columns and a TEST_CASE column.
     It holds EMP-image rows for each test case that show the row as it should look BEFORE the
     test for that test case is performed.
     CREATE TABLE DEPT_TEST_BEFORE
     TESTCASE NUMBER,
     DEPTNO NUMBER(2),
     DNAME VARCHAR2(14 BYTE),
     LOC VARCHAR2(13 BYTE)
2. DEPT_TEST_EXPECTED
     This table also has all EMP table columns and a TEST_CASE column.
     It holds EMP-image rows for each test case that show the row as it should look AFTER the
     test for that test case is performed.
Each of these tables are a mirror image of the actual application table with one new column
added that contains a value representing the TESTCASE_NUMBER.
To create test case #3 identify or create the DEPT records you want to use for test case #3.
Insert these records into DEPT_TEST_BEFORE:
     INSERT INTO DEPT_TEST_BEFORE
     SELECT 3, D.* FROM DEPT D where DEPNO = 20
Insert records for test case #3 into DEPT_TEST_EXPECTED that show the rows as they should
look after test #3 is run. For example, if test #3 creates one new record add all the
records fro the BEFORE data set and add a new one for the new record.
When you want to run TESTCASE_ONE the process is basically (ignore for this illustration that
there is a foreign key betwee DEPT and EMP):
1. delete the records from SCOTT.DEPT that correspond to test case #3 DEPT records.
          DELETE FROM DEPT
          WHERE DEPTNO IN (SELECT DEPTNO FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3);
2. insert the test data set records for SCOTT.DEPT for test case #3.
          INSERT INTO DEPT
          SELECT DEPTNO, DNAME, LOC FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3;
3 perform the test.
4. compare the actual results with the expected results.
     This is done by a function that compares the records in DEPT with the records
     in DEPT_TEST_EXPECTED for test #3.
     I usually store these results in yet another table or just report them out.
5. Report out the differences.
This second approach uses data the users (QA) are already familiar with, is scaleable and
is easy to add new data that meets business requirements.
It is also easy to automatically generate the necessary tables and test setup/breakdown
using a table-driven metadata approach. Adding a new test table is as easy as calling
a stored procedure; the procedure can generate the DDL or create the actual tables needed
for the BEFORE and AFTER snapshots.
The main disadvantage is that existing data will almost never cover the corner cases.
But you can add data for these. By corner cases I mean data that defines the limits
for a data type: a VARCHAR2(30) name field should have at least one test record that
has a name that is 30 characters long.
Which of these approaches makes the most sense for you?

Creating test data for a problem

Hi,
I've been using this forum for a few months and it has been extremely useful. The problem is that I actually have no idea how to create test data for a specific problem. I've tried googling but to no avail. I have had other users create test data for some of my problems using a 'WITH' statement but it would be great if someone could explain the logic behind it and how to approach a specific problem where in the query I use multiple tables.
I know it's probably a stupid question and I'm relatively new to sql but it would help a lot if I understood the process.
Banner:
Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production"
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production

Look at the point 3 and 4. You can also follow other points too.
Please consider the following when you post a question. This would help us help you better
1. New features keep coming in every oracle version so please provide Your Oracle DB Version to get the best possible answer.
You can use the following query and do a copy past of the output.
select * from v$version 2. This forum has a very good Search Feature. Please use that before posting your question. Because for most of the questions
that are asked the answer is already there.
3. We dont know your DB structure or How your Data is. So you need to let us know. The best way would be to give some sample data like this.
I have the following table called sales
with sales
as
 select 1 sales_id, 1 prod_id, 1001 inv_num, 120 qty from dual
 union all
 select 2 sales_id, 1 prod_id, 1002 inv_num, 25 qty from dual
select *
from sales 4. Rather than telling what you want in words its more easier when you give your expected output.
For example in the above sales table, I want to know the total quantity and number of invoice for each product.
The output should look like this
Prod_id sum_qty count_inv
1 145 2 5. When ever you get an error message post the entire error message. With the Error Number, The message and the Line number.
6. Next thing is a very important thing to remember. Please post only well formatted code. Unformatted code is very hard to read.
Your code format gets lost when you post it in the Oracle Forum. So in order to preserve it you need to
use the {noformat}{noformat} tags.
The usage of the tag is like this.
<place your code here>\
7. If you are posting a *Performance Related Question*. Please read
 {thread:id=501834} and {thread:id=863295}.
 Following those guide will be very helpful.
8. Please keep in mind that this is a public forum. Here No question is URGENT.
 So use of words like *URGENT* or *ASAP* (As Soon As Possible) are considered to be rude.

How to pass the condition vallues in bapi BAPI_PO_CREATE1 for items as well

HI,
where to pass the condition value table in bapi BAPI_PO_CREATE1 item level as well as header level
Like Frieght charges,discounts, basic price ,VAT,CST etc.
Is there any BAPI for GR tcode MIGO.
Pl send along with simple examples .
Your answeres will be rewarded.

Pass the condition value to the following parameters.
POCONDHEADER                 =
POCONDHEADERX                =
POCOND                       =
POCONDX                      =
For GR u case use the following BAPI.
GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
                     02 - MB31 - Goods Receipts for Prod Order
                     03 - MB1A - Goods Issue
                     04 - MB1B - Transfer Posting
                     05 - MB1C - Enter Other Goods Receipt
                     06 - MB11
Domain: KZBEW - Movement Indicator
     Goods movement w/o reference
B - Goods movement for purchase order
F - Goods movement for production order
L - Goods movement for delivery note
K - Goods movement for kanban requirement (WM - internal only)
O - Subsequent adjustment of "material-provided" consumption
W - Subsequent adjustment of proportion/product unit material
         call function 'BAPI_GOODSMVT_CREATE'
           exporting
               goodsmvt_header             = gmhead
               goodsmvt_code               = gmcode
             *   TESTRUN                     = ' '
          IMPORTING
              goodsmvt_headret            = mthead
         *   MATERIALDOCUMENT            =
MATDOCUMENTYEAR             =
           tables
             goodsmvt_item               = itab
GOODSMVT_SERIALNUMBER       =
            return                      = errmsg.

Test Data Gerneration for BAPI "BAPI_PO_CREATE1"

Similar Messages

Maybe you are looking for