Test mapping

hi experts,
I'm mapping my testing, when manually enter values in the window of my test test is OK, when you import a file, the nodes are shown in red and does not work (the values are placed correctly), I do not understand because it can be,
very thanks,

Hi Silvia,
This can be due to the error with namespace of the message.
Try saving the XML of the message when you enter the values in Test tab and compare it with the XML that you have got.
There are bound to be some differences in them.
Regards,
Alka.

Similar Messages

Error while Test Map in Biztalk 2010

Hello,
I have made some changes to the existing map and tried to test the map.The Changes I made is adding a scripting functoid with the following code
public string Code(string recode, string amount)
{ double k = Convert.ToDouble(amount);
if(k>0)
{ return " ";
else return recode;
also added the logical functoid and value mapping in another field like
When I clicked the Test Map option, I am getting an error message like this
I am not sure what is going wrong. Can anybody help me with this.
Thanks

Hello,
I have made some changes to the existing map and tried to test the map.The Changes I made is adding a scripting functoid with the following code
public string Code(string recode, string amount)
{ double k = Convert.ToDouble(amount);
if(k>0)
{ return " ";
else return recode;
Here's the problem.
You can't convert a null value
to a meaningful value through Convert.
Your best option is to check for null first
and then assign a value of 0 (or whatever) to the result.
Rachit

File to R3: Unable to test mapping

Hi,
I am working on File to R/3 scenario. I plan to use File adapter and IDoc adapter. And I did my message mapping from file fields to "Cremas..01". To my knowledge, I mapped all the required fields. But when I test my mapping by entering the input values, I get the below error:
23:26:26 Start of test
Mapping object File_to_R/3 incomplete. Unable to continue execution
23:26:26 End of test
Any help or pointers with this error would be greatly appreciated.
Thanks and Regards,
Giri

Hi,
I think you are not giving mandatory fields in the IDOC. For example BEGIN should give a constant value as "1".
If you give all the mandatory fields then it will work. Try to give all the values and check F7. still if you found any error it will tell you and you can fix them.
Thanks,
krishna chaitanya.

Testing mapping program

hi all.
i want to clear one thing that.
i have defined graphical mapping in design.
i.f a file to bapi.
so i created a graphical mapping program and in that i just need to check no of records in body witn trailer and sum of individaul amounts in body with trailer info .
if they both match then i need to set BAPI flag in reciever side as Y Otherwise N.
so just created my mapping program and tested it with only one record in body.
in this case it is sucess but when i tested the mapping program by putting two records in body (by duplicate subtree option in design mapping) .
in this case even the checking matches the flag in reciver side i.e BAPI is set to N.
so i just nee d to conform what is the way for testing mapping program in design.
waiting for u r response.
bye.
regards.
seeta ram.

Hi Ram,
your this way of testing msg mapping is okay.......just check the logic of your mapping and correct it, then you will get correct output in your this scenario.....
Thanks,
Rajeev Gupta

Exception has been thrown by the target of an invocation. Object reference not set to an instance of an object....when I do test map

Hello
I have a c# code in which I am calling a web service, and c# code returns a string value.
I am calling that c# code from Biztalk Map script function as an external assembly
but when I do test map I get the above above error...Can some one please answer...i m working on BTS2006R2 and i have also tried to test the c# code from a test windows applciation and where does return the values as expected..

Hi,
"Exception has been thrown by the target of an invocation" is a very generic exception. you need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also
the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly

Problem is testing mapping via test tab - URGENT

Hello experts,
I have a idoc to file scenario. Now in my production environment, SAP r/3 is sending some 14 idocs containing around 13000 article informations in all. 12 of the 14 idocs have been processed successfully but 2 idocs errored out.
When i see the monitor, it says null pointer exception in mapping. that means its giving error in one of my udf. But what exactly the error is can only be found if i test my mapping with this payload.
I download the XML (which i very big as it contains some 850 article information) and when i try to upload this xml in the test tab, it gives me error that the tree cannot be created and IR hangs. It doesnt respond anymore and i need to forcefully close it via Task Manager. I dont understnad why is it not able to upload the XML. Is there any limit to which the test tab can take the xml or am i missing something.
Please help as this si really urgent as i am working on the production system.
regards,
Yash

hi
Chk the XML structure first..It will really better if U can download the Altova XML tool (if possible ) and can chk the structure .
Java null pointer exception comes if one of ur object is not getting the proper value..
That means U initialize ur object ..U use also in any method..
When U use the object in method it is not getting the exact "value" u want to pass.Chk also the UDF..
I think the error is due to the UDF u hv written..
Cheers
MANas

Missing node in Message Mapping when test mapping??

Experts,
I have the following Mapping Structures:
Sender:
<Recordset> 1-1
   <Records> 1:unbounded
        <field1>1:1
        <field2>1:1
Receiver:
<Recordset> 1-1
    <Header> 1-1
     <Records> 0-unbounded
           <field1>
           < field2>
     <Trailer> 1-1
Mapping is completed for all fields here.But one thing I notice is on Receiver side : all nodes are Green exept Records - it is Gray with some red smal dot in the gray..
1.Question: What this means?Shouldn't all nodes turn green after mapping is done??
2.When click on TEST on Message MApping I dont even see the Receiver Records node appearing on right(receiver side) But I was able to see Header and Trailer...Why the Records is missing??
On the other hand the result from the test is successfull which is even more confusing ,How come it can be succesful since Records is not there...
I can provide screenshots if needed for more clarity ..Any help is appreciated asap..Thanks much to all!
J...

Hi John,
   It is very simple and there is no complexity with this problem.
<b> 1.Question: What this means?Shouldn't all nodes turn green after mapping is done??</b>
        If you mapped the source field to the correspoding target field..all the target fields get turn to green color. If you didn't mapp any target field that filed should appear with gray color..comming to the small circle in the recordset field...it is indicates that ..that field is "Unbounded".
   For resolving the above issue...do the mapping like this.
   <Recordset>---><Recordset>
   <Records>-------><Records>
   <field1>----><field1>
   <field2>-----> <field2>1
Keep the empty constant value for the target field Header...
   empty constatnt---->Header.
So once you done this check the mappping it will execute fine and even you able to see the recods node in the target structure.
Please let me know if you have any queries...!
Thanks and Regards,
Chandu.

Exchange 2013 SP1 - Unable to test Mapi-over-HTTP Outlook Connectivity

I've configured MAPI over HTTP in my testing environment. It is working fine. But i'm unable to test this configuration using the Powershell Test-OutlookConnectivity CMDlet.
Outlook is working fine and is using MAPI over HTTP, so i'm pretty sure there are no configuration problems. But the CMD-let gives me the following output:
[PS] C:\Windows\system32>Test-OutlookConnectivity -RunFromServerId <myserver> -ProbeIdentity OutlookMapiHttpSelfTestProbe
WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for
invoke now request id 1ad0cb55e6cc45c791194b34641fe3c2 and probe workdefinition id 241.
Failed to find the probe result for invoke now request id 1ad0cb55e6cc45c791194b34641fe3c2 and probe workdefinition id
241.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], InvalidOperationException
    + FullyQualifiedErrorId : System.InvalidOperationException,Microsoft.Exchange.Management.Tasks.TestOutlookConnecti
   vity
    + PSComputerName        : <fqdn of my serer>
Does anyone have a sollution for this?

Hello @all,
I got the same issue. The configuration is functional (Outlook connects over http). But the test-cmdlet raises this error. Is there any solution?
Greetings from Germany

What rights i have to have to test mapping in IR.

Hi, all.
When i try to test Operation Mapping in Integration Repository - i get "User has no authorization" message.
It is productive server and rights, that allow test, change or delete - not allowed for me.
I want to know if there some options to have rights only for test, but not for change or delete.
Can you help?
Thanks.

Hello,
When i try to test Operation Mapping in Integration Repository - i get "User has no authorization" message.
First of all, you should not even be testing in Prod, it might produce side effects
Since the mappings for QA and Prod are the same, why not load the test data in QA and test from there? You can compare your authorizations in QA and Prod by using SU01.
Hope this helps,
Mark

XSLT MAPPING TEST PROBLEM

Hi All,
We had a problem while testing mapping in Altova Map Force.Here question is while testing our mapping in IR's interface mapping we got the message "Error while loading XSLT ".Target result is notgetting displayed.
Any ideas.....
Regards,
Surya.

After importing XSL in imported archives, double click it and check whether u can open it or not. Make sure that the namespace ur XSL uses is same as the namespac under which it is imported. Make sure file loaded is XSL and not XSLT. Then try running end-to-end scenario and check the result.
Regards,
Prateek

Java.lang.NoClassDefFoundError In a Mapping test

Hi all
We are devolping in XI3.0 and SP15
we are triying to executed a test mapping in a message mappping in the IB and we obtain the following error:
java.lang.NoClassDefFoundError
We have test all the message mapping that we had before and all of them are ginving us the same error.
Any idea?
Many thanks in avance
Noelia

> Hi,
>
> 1) Did you upgraded your NWDS if so if you did not
> upgrade your WAS server. This gives such error.
> so it is better you are deploying your application
> from higher version of NWDS to lower version of WAS
> server.
Nothing was upgraded
>
> 2)If it is a installed again, make sure all the
> post-installation steps completed correctly.
No installing
> 3)Make sure that J2EE Engine is up.
it is UP because if not I cannot acces to the IB
>
The only thing that I have made is to develop a JAVA mapping, apart from the graphical mappings that I have before.
Those graphicals mapping were warking before, Then it should be something in the system not in the development, I think??
ANy idea?
Regards
Noelia
Message was edited by: Noelia Fernandez

Mapping tested successfully in Simulator but fails in SXI_MONITOR

Hi gyus,
The Outbound message structure is the following:
MT_CAP_BANKS
actions     1..1    xsd:string
RECORD   0..unbounded Segment
   Field1
   Field2
   etc
The target Inbound message structure is the structure of the JDBC receicer adapter, since the scenario is Proxy to JDBC.
MT_DB_BANKS
STATEMENT       1..unbounded
DBSTATEMENT   1..1
   action
   etc
I want to have one STATEMENT per RECORD segment. But the RECORD segment may also be missing in case that we want to do massive delete of all the entris in a table. So I may have only the action field in some test cases.
Therefore, I am mapping RECORD>mapWithDefault>STATEMENT.
Mapping is tested successfully in simulator for all cases, either many RECORD segment or no RECORD segment. Interface mapping tested successfully. However, when we are doing real tests, mapping works fine with many RECORD segments, but fails with no RECORD segments (Cannot produce target element /ns0:MT_DB_BANKS/STATEMENT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd).
Any ideas ?
I also tried to chang the mapping with IF RECORD EXISTS THEN STATEMENT='' ELSE RECORD-->STATEMENT but problem still remains!!

Hi,
I'm not really sure why you are encountering this error. Have you tried any context modifications before mapping to field STATEMENT?
Could you try this mapping?
constant:null -----------------------------------------> \
RECORD --> mapWithDefault:null --> equalsS:null --> ifThenElse --> STATEMENT
constant:hasValue -------------------------------------> /
The code should perform just like the one with the mapWithDefault without the ifThenElse, but it's worth to try.
Hope this helps,

Test Failed in Message Mapping

Hi,
I have mapped all the mandaory fields and records, but still not able to run a test. It's getting failed with the below error.
12:02:56 Start of test Mapping object Mapname incomplete. Unable to continue execution
leaf node with minOccurs>0 and without mapping
12:02:56 End of test
Thanks for help if anyone has any clue of what's going wrong.
Regards,
Bharani

Hi,
Are you sure you have done the mapping correctly for all the fields because the error clearly says one of the mandatory fields has not been mapped.
Regards,
Sanjeev.

How can I write unit tests for BizTalk Maps with multipe inputs?

I want to bring all my maps under unit test coverage, but can't seem to find a way to test maps with multiple inputs. Maps with multiple inputs are first merged into a single schema by biztalk and then the map actually uses that inline schema as source.
What I tried is- produced a generated instance of source schema by clicking "Test Map", and then modified the skeletal instance by stitching together the multiple input files into it. There are two problems I am facing going forward that way- 1#
It takes a lot of time to craft a mock input of inline schema and 2# the mock input fails input validation although the input works just fine in the orchestration.
So is there a better or standard way to test such Maps?

For testing maps with multiple inputs, follow the below steps-
Lets assume you have a map with two input schemas A and B and output as C.
1) To create the required schema just reverse the inputs i.e. make a map with C as input and A & B as output. Later do a test map. This will generate an XML File with schemas A & B.
2) Now you just to need to replace OutputMessagePart_0 to InputMessagePart_0
and OutputMessagePart_1 to InputMessagePart_1
Later you can use this xml for testing your original map.
Refer the below article
Developing and Testing Maps which have Multiple Source and Destination Schemas
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

XSLT mapping with Java helper classes

Hi,
I'm trying to implement a XSLT mapping to convert my request to a specific soap request message format for this I'm calling some methods from a java helper class. I have imported the jar file into the archives. When I tried to test the interface it keeps complaing there is some exception but doesn't give me the exact error. Has any one called any java helper classes with in XSLT mapping, if so I would appreciate if you could help me with this. Here is the code from xsl.
<wsse:Security soapenv:actor="http://schemas.xmlsoap.org/soap/actor/next" soapenv:mustUnderstand="0" xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/07/secext"   xmlns:UserToken="java:com.company.test.mapping.UserTokenMap">
<wsse:UsernameToken>
    <wsse:Username xsi:type="soapenc:string" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">
      <xsl:value-of select="UserToken:getUsername()"/>
    </wsse:Username>
    <wsse:Password wsse:Type="wsse:PasswordDigest" xsi:type="soapenc:string" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">
    <xsl:value-of select="UserToken:getPasswordDigest()"/>
    </wsse:Password>
    <wsse:Nonce xsi:type="soapenc:string" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">
    <xsl:value-of select="UserToken:getNonce()"/>
    </wsse:Nonce>
    <wsu:Created xsi:type="soapenc:string" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">
    <xsl:value-of select="UserToken:getCreateDate()"/>
</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
Thanks,
Joe

Hi,
I'm getting following exception when I refer to the java class with in my XSLT mapping. Any one encountered the same problem.
com.sap.engine.services.ejb.exceptions.BaseRemoteException:
Exception in method transform.
     at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:218)
     at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native
Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.UnsupportedClassVersionError:
com/earthlink/xi/mapping/UserTokenMap (Unsupported
major.minor version 49.0)
     at java.lang.ClassLoader.defineClass0(Native
Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:448)
     at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:175)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
     at com.sap.engine.lib.xsl.xpath.JLBLibrary.<init>(JLBLibrary.java:33)
     at com.sap.engine.lib.xsl.xpath.LibraryManager.getFunction(LibraryManager.java:69)
     at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:98)
     at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56)
     at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43)
     at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51)
     at com.sap.engine.lib.xsl.xslt.XSLValueOf.process(XSLValueOf.java:76)
     at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:296)
     at com.sap.engine.lib.xsl.xslt.XSLElement.process(XSLElement.java:248)
     at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:296)
     at com.sap.engine.lib.xsl.xslt.XSLElement.process(XSLElement.java:248)
     at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:296)
     at com.sap.engine.lib.xsl.xslt.XSLElement.process(XSLElement.java:248)
     at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:296)
     at com.sap.engine.lib.xsl.xslt.XSLElement.process(XSLElement.java:248)
     at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:296)
     at com.sap.engine.lib.xsl.xslt.XSLElement.process(XSLElement.java:248)
     at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:296)
     at com.sap.engine.lib.xsl.xslt.XSLTemplate.process(XSLTemplate.java:272)
     at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:463)
     at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:431)
     at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:394)
     at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398)
     at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240)
     at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150)
     at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81)
     at com.sap.aii.ibrep.server.mapping.ibrun.RepSequenceMapping.execute(RepSequenceMapping.java:54)
     at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80)
     at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107)
     at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127)
     at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104)
     at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40)
     at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:167)
     ... 10 more
; nested exception is:
     java.lang.UnsupportedClassVersionError:
com/earthlink/xi/mapping/UserTokenMap (Unsupported
major.minor version 49.0)

Test mapping

Similar Messages

Maybe you are looking for