Test Plan For Interface Scenarios

Hi Team,
I have maintained the interface scenarios in SOALR01. This "Interface Scenario" is the standard node in Solution Manager like "Organizational Units", "Master Data" & "Business Scenarios". But in STWB_2 (Test Plan Creation), the interface scenarios are not listed for selection.
Can anyone please let me know the reason?
Note: I am using Sol Man 7.0
Thanks

Do you have some more details about the equipment and setup you want to test.

Similar Messages

Unit test plan for inbound and outbound interfaces

I am trying to create a UNIT TEST PLAN for an interface. In this interface a flat file in IDOC format is picked up from the application server and processed using EDI_DATA_INCOMING for the relevant posting ( example : Sales order creation from a PO IDOC). IF the file is not in IDOC format then it is reformatted to the IDOC format manually.
In second scenario(outbound), after sales order creation or billing document creation, IDOC is created which is read and a custom flat file is created and sent to a middleware.
PLease suggest a unit test plan for these kind of scenarios or send a sample UTP if possible.
REgards
Nishant
PS: points will be awarded to helpful answers.

Unfortunately this isn't possible, the esa has only one routing table. You'll have to add specific routes for your internal networks.
I usually avoid two-armed setups because of this and it gets even worse if you want to use virtual gateways (traffic gets sent via the internal interface with an IP from the external interface)

Test Plan for Video Conferencing

We are planning to set up an MPLS network exclusively for video conferencing. I need to prepare a test plan for the tests to conduct to check the conferencing performance and related parameters after the implementation.
I am pretty new in Video conferencing. May someone help me to prepare a test plan for this?

Do you have some more details about the equipment and setup you want to test.

Best plan for this scenario (migrate oes2 to oes11)

Hi there!
I would like to ask you guys the best plan for migrate a few servers that I have
in oes2 to oes11.
I have four servers in oes2sp2/sp3, these servers have a few NSS
volumes over NCS. Also I have my iPrint service on two machines,
also using NCS. I have one cluster between two machines and
other cluster between the other two machines. For exmaple,
machine1 and machine2, three NSS volumes (every NSS volume is a cluster
resource) and other resource in the same cluster for iPrint. Cluster: CL1
machine3 and machine4, one NSS volume (for other people in the company)
in other cluster. Cluster: CL2. In this cluster only have a NSS volume/resource.
Machine1/3 are physical, machine2/4 are virtual (vmware)
My CA is in other server that I will migrate after a while. So, It seems that there is
no problem with the certificate. Machine1 and machine3 are a replica for the eDir in
my organization.
My plan: I have deployed two virtual machines and one physical with oes11sp1 and sles11sp2.
I think that the best plan is migrate with migration tool iPrint first, like a cluster resource,
and NSS volumes, and after that, make a transfer ID (like a different project)
For machine1/3, move NSS volumes and after, make a transfer ID.
Is this correct? I dont know If I have to delete the current clusters (cl1 and cl2) and
create new ones, after that, create every resource as It was on the old ones.
thank you so much !
Antonio.

Originally Posted by kjhurni
This is just my opinion, of course, but:
If you don't want to have to migrate your NSS data and keep the same server names/IP/s and cluster load scripts, then I believe a Rolling Cluster Upgrade is a good way to go.
If you look in my signature, there's a link to my OES2 guides. Somewhere there is one that I did for our Rolling Cluster Upgrade.
If all you have is NSS and iPrint, then you only need to use the miggui (migration utility) for iPrint--or so I think (I do have to followup on this one as I vaguely recall I asked this a while back and there may have been a way to do this without migrating stuff again).
But your NSS data will simply "re-mount" on the OES11 nodes and you'll be fine (so that's why I like the rolling cluster upgrades).
Let me double-check on the OES2 -> OES11 cluster option with iPrint.
--Kevin
Thank you Kevin for your answer.
Finally, I think Im going to proceed using transfer ID on my servers that Im only using NSS over NCS (I only have two machines with one NSS volume)
because it seems that its a good option. I would like to keep old IPs from all the servers, cluster and resources if possible. So, testing this
migration on my test environment it seems that it works fine:
- I use miggui for transfer id between all the machines: physical -> physical and virtual -> virtual. eDirectory assumes new hostname, IP, etc.
the only task "out of the box" is that I have to delete the cluster and regenerate (reconfigure NCS on the new servers) but its pretty easy. This way
I have the two old ips from the older machines and all the ips from the cluster and the cluster resources also. I think that its the best plan.
For the other two machines that has 4 nss volumes and iPrint I must think about a plan. But with those, Im going to proceed this way. I hope
I have chosen a good plan!
thank you so much all for your answers / advices

Test plan for upgrading the support packs

Dear friends,
We are going to upgrade the BI system with SP18.
Please let me know the impact system will be facing with this upgrade and the test plan to take care after the upgrade.
With Regards
Neetu
Edited by: Siegfried Szameitat on Oct 29, 2008 8:48 AM

Hi,
it will helps hopeful,
Upgradation steps:
1) Convert Data Classes of InfoCubes. Set up a new data class as described in SAP OSS Note 46272.
2) Pay attention to the naming convention. Execute the RSDG_DATCLS_ASSIGN report.
3) Run the report RSUPGRCHECK to activate objects.
4) Upgrading ABAP and JAVA in parallel may cause issues. If there is no custom development on J2EE instance, it is recommended to drop the J2EE instance and re-install the latest J2EE instance after the upgrade.
5) Apply SAP OSS Note 917999 if you include the Support Patch 6 with the upgrade or you will get the error at PARCONV_UPG phase. When you upgrade to a product containing Basis 700, the phase PARCONV_UPG terminates. You included Basis Support Packages up to package level 6 (SAPKB70006) in the upgrade. The job RDDGENBB_n terminates with the error RAISE_EXCEPTION. In addition to this, the syslog contains the short dump TSV_TNEW_PAGE_ALLOC_FAILED. The program SDB2FORA terminates in the statement "LOOP AT stmt_tab". An endless loop occurs when the system creates the database table QCM8TATOPGA.
6) Apply the OSS note 917999 if you get the following error during PARCONV_UPG phase: PARCONV_UPG terminates with TSV_TNEW_PAGE_ALLOG_FAILED
Critical OSS Notes:
819655 u2013 Add. Info: Upgrade to SAP NW 2004s ABAP Oracle
820062 - Oracle Database 10g: Patchsets/Patches for 10.1.0
839574 u2013 Oracle database 10g: Stopping the CSS services ocssd.bin
830576 u2013 Parameter recommendations for Oracle 10g
868681 u2013 Oracle Database 10g: Database Release Check
836517 u2013 Oracle Database 10g: Environment for SAP Upgrade
853507 u2013 Usage Type BI for SAP Netwaevers 2004s
847019 - BI_CONT 7.02: Installation and Upgrade Information
818322 u2013 Add. Info: Upgrade to SAP NW 2004s ABAP
813658 - Repairs for upgrades to products based on SAP NW 2004s AS
855382 u2013 Upgrade to SAP SEM 6.0
852008 u2013 Release restrictions for SAP Netweaver 2004s
884678 - System info shows older release than the deployed one
558197 u2013 Upgrade hangs in PARCONV_UPG
632429 u2013 The upgrade strategy for the add-on BI_CONT
632429 - The upgrade strategy for the add-on FINBASIS
570810 - The upgrade strategy for the add-on PI_BASIS
632429 - The upgrade strategy for the add-on SEM-BW
069455 - The upgrade strategy for the add-on ST-A/PI
606041 - The upgrade strategy for the add-on ST-PI
632429 - The upgrade strategy for the add-on WP-PI
Post upgrade Steps :-
1. Read the Post Installation Steps documented in BW Component Upgrade Guide
2. Apply the following SAP OSS Notes 47019 - BI_CONT 7.02: Installation and Upgrade 558197 - upgrade hangs in PARCONV_UPG, XPRAS_UPG, SHADOW_IMPORT_UPG2 836517 u2013 Oracle Database 10g: Environment for SAP Upgrade
3. Install the J2EE instance as Add-in to ABAP for BI 7.0 and apply the Support Patch that equivalent to ABAP Support Patch.
4. Run SGEN to recompile programs.
5. Install the Kernel Patch.
6. Missing Variants - (also part of test script) look at the RSRVARIANT table in SE16. If it is empty, then you will definitely need to run RSR_VARIANT_XPRA program - RSR_VARINT_XPRA OSS -953346 and 960206 1003481
7. Trouble Shootauthorizations 820183 - New authorization concept in BI
Regards,
Deva Reddy

Required Unit test Plan for Data migration

Dear All,
I am looking for unit test plan Draft documents/templates which covers
1. Testing tools
2. Methods
3. Error handling
4. Reviews and approvals
The project is a Oracle 10g data migration from one schema to another schema.
It will be a greate help if anyone can forward the same to me.
Thank you.

Hi Vaishali,
You may wish to refer the links below...
https://service.sap.com/instguides --> SAP NetWeaver --> Release 2004s --> Upgrade
https://www.sdn.sap.com/irj/sdn/developerareas/bi
latest on upgrade tp BI7.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
Upgrading BW 3.X to SAP NetWeaver 2004s BI (PDF 2.6 MB)
Front End Migration strategy
Here's the migration strategy: Rolling out the New SAP NetWeaver 2004s BI Frontend Tools
Presentation
http://csc-studentweb.lrc.edu/swp/Berg/Articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt
Here are the frontend requirements:
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Here are the backend requirements in the product availabilty matrix:
https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200615320900001250
Migration of Web Teplates
832713 - Migration of Web templates from BW 3.x to Netweaver
Assign points if this helps.
Regards,
Anil

Customer attributes creation for interface scenario ?

Hi Experts,
I want to create customer attributes in the interface scenario in dswp transaction.
I was able to create one using the SPRO transaction. but it does not allow me to add further.
Can anyone tell me how to resolve this or give any useful blogs, as i am a beginner.
Thanks,
Shamly
Edited by: Shamly MM on Jun 9, 2010 10:10 AM

Hi,
Are you looking for Application Monitors and Customer exits for your requirement. May be this [guide|https://websmp110.sap-ag.de/~sapdownload/011000358700006184412006E/Setup_Guide-Customer_Exit.pdf] can help you.
Hope this helps.
Regards,
Jagan

Test Plan for upgrade SAP and downstream EDI transaltor

We are in the middle of upgrade 4.0B to ECC 6.0 with mercator as a downstream EDI translator.
Can anyone share a test plan or a list of things you test to make sure the data flow from either side is not affected.....

We are in the middle of upgrade 4.0B to ECC 6.0 with mercator as a downstream EDI translator.
Can anyone share a test plan or a list of things you test to make sure the data flow from either side is not affected.....

Test scenario and test plan

Hi All,
Can somebody explain what is a test scenario and test plan with an eg ( For eg FB 60). and what are the essential things one needs to incorporate for test scenario and a test plan
Appreciate your help.
Thanks
SM

Hi,
I am giving you the information on test plan and test scenario below. Please note that this is with reference to Solution Manager.
You create a test plan for a project in the SAP Solution Manager if you want to reuse the project structure created in the Business Blueprint for a process-oriented test. You can select all the test cases and transactions which you have assigned to the project structure, for the test plan. These test cases are performed by testers; they can call assigned transactions and run test cases in them.
Test Scenarios are nothing but the end to end business processes which are to be tested.
Hope this helps.
Rgds
Manish

Test Plan APO

Hi all,
I would ask a favor, I need help to make a test plan for APO system. What would be the test plan to determine if it is well implemented in APO.
Thanks for your help
Rob

Hi Rob,
I guess the answer for this may not fit in this space. But you can start identifying all the functionalities in the APO system you have built.
Perform the unit test for all of the functionalities separately and then go ahead with the scenarios with integration with other functionalities.
It again depends on what sub modules you have implemented in your APO instance.
Regards,
Rag

Certification test plan

Hi,
Where can I get a hold of a sample test plan for ABAP add-on certification?
The add-on consists of just data dictionary structures and read-only RFMs.

Hi Dan,
We don't have a sample test plan for the ABAP add-on certification. I can give you the main requirements for this certification.
1) Certification starts with R/3 release 4.6
2) Obtain an ABAP workbench development license from SAP
3) Develop your component using your own registered namespace
3) Must use Add-on Assembly Kit (AAK) for packaging and delivery your add-on component. The AAK is provided by ICC
4) No direct INSERT/DELETE/MODIFY into standard tables; only use SAP endorsed interface technologies like BAPIs, released RFMs, released Idocs
If you are interested in the certification program, please contact [email protected]
Regards,
MaiAnh

UTP - Test Plans IDOCs - Inbound -Outbound

Hi All,
can some one please provide the samples of standard UTP - Test plans for INBOUND & OUTBOUND IDOC interfaces, if you have such.
Regards,
Sridhar

Hi,
I am also in need of UTP for outbound IDoc.
Please forward me to my id : [email protected]
Your help would be appreciated.
Thanks,
Sangeetha

MBAM Test Plan

I am in the process of designing a MBAM 2.5 Installation that will be integrated with SCCM 2012 R2
There is no Test lab as such however I need to create a test plan for this. Does anyone know of any test plans for the application?

Hello,
Did the article
Validating the MBAM 2.5 Server Feature Configuration could help you?
Regards,
Follow me on Twitter http://www.twitter.com/liontux | My Blog (French/English) :
http://security.sakuranohana.fr/

Test Plan generation in SOLAR_TESTPLAN

HI
Is the test plan generation in SOLAR_TESTPLAN by default a transportable object?. If i save it as a local object i wont be able to transport it to other clients, but i want to create the test plans independant of the client systems. Please let me know if there is an option
Thanks

Hi
You create a test plan for a project if you want to reuse the project structure created in the Business Blueprint for a process-oriented test. means You organize tests after you have created a project structure in Create Business Blueprint,Configured, and want to test these configurations by process.
then only you can select all the test cases and transactions which you have assigned to the project structure, for the test plan.
When you create a test plan for a project, the default test plan structure is based on the structure of the Business Blueprint that you have previously created for your project.(hope i clear you that how it get sync).
and yes you required to save the Test plan as tranportable package obeject directory, this is needed only for the optimizing transports.
please check this [Transport testplan|http://help.sap.com/saphelp_smehp1/helpdata/en/69/38d2872daa11d5b37d0050dade3beb/frameset.htm]
Thanks,
Jansi

Create Test Plan from Solution or Project

Hi,
When creating a Test Plan does it matter if it is from the Solution or a Project?
thanks

Hi,
I guess the first question should be which version of Solution Manager are you using, 7.0 or 7.1.
The process is typically to create a project, document the business process hierarchy, assign Test Cases to the business process hierarchy, and create a test plan which allows you to select the processes to be tested and the test cases. If there are no test cases assigned to processes then the test plan cannot be created.
A simple rule is that an Implementation Project is used to implement new business processes and during this project you document the processes including test cases. These test cases can be assigned to a test plan and executed. When the project passes the go-live the documentation you have created during the implementation project can be copied to a Solution. This is when the Solution is updated with documentation relating to the productive environment.
From a documentation perspective the Solution will therefore provide all the documentation associated with the productive landscape, including the test cases you have used as a basis for your test documents in the test plan. When you change a productive business process you can use a maintenance project to check out the documentation from the Solution, change the documentation, and then check in the changed document.
For Test Cases the same logic applies. If you need to change a Test Case you can check it out to the maintenance project, create a test plan for the maintenance project and perform the testing.
The important note is that the Solution should reflect the productive environment and a project should reflect the project environment. The benefit is control and traceability.
Regards,
Rich Labib

Test Plan For Interface Scenarios

Similar Messages

Maybe you are looking for