Test Plan for Video Conferencing

We are planning to set up an MPLS network exclusively for video conferencing. I need to prepare a test plan for the tests to conduct to check the conferencing performance and related parameters after the implementation.
I am pretty new in Video conferencing. May someone help me to prepare a test plan for this?

Do you have some more details about the equipment and setup you want to test.

Similar Messages

Requirement for Video Conferencing on CallManager 3.3

hi,
can anyone help me on this? Im preparing for a proposal for implementing video conferencing on a CallManager 3.3. VidCon should be used on the HQ and two branch offices.
Tnx...

the need to use video conferencing should be considered as a factor for upgrading your call managers to at least 4.1.
many enhancements, fixes and features, especially for video conferencing, have been introduced since 3.3.
if you required vidConf with 3.3, you should consider using a polycom solution.
http://polycom.com/products_services/1,1443,pw-35,00.html
the VSX series is pretty nice with straight forward config/administration and of course, superb polycom technology/support.
(may not be the cheapest solution but it's definately stable and works well)
NOTE: the cisco IP Video Phones, 7985G, may be able to fulfill your needs; especially if vidConf is only intraCompany.
(requires 7985 phones, ccm 4.1+ and a cisco MCU)

Jtapi for video conferencing

can jtapi be used for video conferencing implementation?

cross posted here:
http://forum.java.sun.com/thread.jsp?thread=522107&forum=28&message=2497931

Unit test plan for inbound and outbound interfaces

I am trying to create a UNIT TEST PLAN for an interface. In this interface a flat file in IDOC format is picked up from the application server and processed using EDI_DATA_INCOMING for the relevant posting ( example : Sales order creation from a PO IDOC). IF the file is not in IDOC format then it is reformatted to the IDOC format manually.
In second scenario(outbound), after sales order creation or billing document creation, IDOC is created which is read and a custom flat file is created and sent to a middleware.
PLease suggest a unit test plan for these kind of scenarios or send a sample UTP if possible.
REgards
Nishant
PS: points will be awarded to helpful answers.

Unfortunately this isn't possible, the esa has only one routing table. You'll have to add specific routes for your internal networks.
I usually avoid two-armed setups because of this and it gets even worse if you want to use virtual gateways (traffic gets sent via the internal interface with an IP from the external interface)

Trying to bypass CAC for Video Conferencing using EnableBWPolicyOverride

Scenario:
CAC enabled and bandwith policy defined for all company sites. Video bandwidth very restricted (250 Kbps).
VIP users were granted a Voice Policy with EnableBWPolicyOverride=TRUE (VIP users must bypass CAC).
Test:
P2P Video Calls between VIP users bypass CAC, allowing high video resolutions (Ok!).
Video Conferences between VIP users don't bypass CAC, limiting video to low resolution (NOT ok).
Is this expected, that Video Conferencing will not respect the EnableBWPolicyOverride=TRUE from the Voice Policy? (I know, it's a VOICE Policy and I'm tlaking about VIDEO. But remember, on P2P video call the bypass worked.
Any ideas?

Hi,
Bandwidth policy override enables administrators to override call admission control policy decisions for a particular user, however, the policy will be overridden only for incoming calls to the user and not for outgoing calls that are placed by
the user. So I think the policy does not apply to video conference.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Best option for video conferencing in ios app ?

I want to implement video conferencing in ios app. what is the best option for this?

There are several: Fuze, Webex, are a few. These two also have desktop components. Try looking in the app store and googling to see if you can also find reviews/suggestions and other options on the web.

Test Plan For Interface Scenarios

Hi Team,
I have maintained the interface scenarios in SOALR01. This "Interface Scenario" is the standard node in Solution Manager like "Organizational Units", "Master Data" & "Business Scenarios". But in STWB_2 (Test Plan Creation), the interface scenarios are not listed for selection.
Can anyone please let me know the reason?
Note: I am using Sol Man 7.0
Thanks

Do you have some more details about the equipment and setup you want to test.

Test plan for upgrading the support packs

Dear friends,
We are going to upgrade the BI system with SP18.
Please let me know the impact system will be facing with this upgrade and the test plan to take care after the upgrade.
With Regards
Neetu
Edited by: Siegfried Szameitat on Oct 29, 2008 8:48 AM

Hi,
it will helps hopeful,
Upgradation steps:
1) Convert Data Classes of InfoCubes. Set up a new data class as described in SAP OSS Note 46272.
2) Pay attention to the naming convention. Execute the RSDG_DATCLS_ASSIGN report.
3) Run the report RSUPGRCHECK to activate objects.
4) Upgrading ABAP and JAVA in parallel may cause issues. If there is no custom development on J2EE instance, it is recommended to drop the J2EE instance and re-install the latest J2EE instance after the upgrade.
5) Apply SAP OSS Note 917999 if you include the Support Patch 6 with the upgrade or you will get the error at PARCONV_UPG phase. When you upgrade to a product containing Basis 700, the phase PARCONV_UPG terminates. You included Basis Support Packages up to package level 6 (SAPKB70006) in the upgrade. The job RDDGENBB_n terminates with the error RAISE_EXCEPTION. In addition to this, the syslog contains the short dump TSV_TNEW_PAGE_ALLOC_FAILED. The program SDB2FORA terminates in the statement "LOOP AT stmt_tab". An endless loop occurs when the system creates the database table QCM8TATOPGA.
6) Apply the OSS note 917999 if you get the following error during PARCONV_UPG phase: PARCONV_UPG terminates with TSV_TNEW_PAGE_ALLOG_FAILED
Critical OSS Notes:
819655 u2013 Add. Info: Upgrade to SAP NW 2004s ABAP Oracle
820062 - Oracle Database 10g: Patchsets/Patches for 10.1.0
839574 u2013 Oracle database 10g: Stopping the CSS services ocssd.bin
830576 u2013 Parameter recommendations for Oracle 10g
868681 u2013 Oracle Database 10g: Database Release Check
836517 u2013 Oracle Database 10g: Environment for SAP Upgrade
853507 u2013 Usage Type BI for SAP Netwaevers 2004s
847019 - BI_CONT 7.02: Installation and Upgrade Information
818322 u2013 Add. Info: Upgrade to SAP NW 2004s ABAP
813658 - Repairs for upgrades to products based on SAP NW 2004s AS
855382 u2013 Upgrade to SAP SEM 6.0
852008 u2013 Release restrictions for SAP Netweaver 2004s
884678 - System info shows older release than the deployed one
558197 u2013 Upgrade hangs in PARCONV_UPG
632429 u2013 The upgrade strategy for the add-on BI_CONT
632429 - The upgrade strategy for the add-on FINBASIS
570810 - The upgrade strategy for the add-on PI_BASIS
632429 - The upgrade strategy for the add-on SEM-BW
069455 - The upgrade strategy for the add-on ST-A/PI
606041 - The upgrade strategy for the add-on ST-PI
632429 - The upgrade strategy for the add-on WP-PI
Post upgrade Steps :-
1. Read the Post Installation Steps documented in BW Component Upgrade Guide
2. Apply the following SAP OSS Notes 47019 - BI_CONT 7.02: Installation and Upgrade 558197 - upgrade hangs in PARCONV_UPG, XPRAS_UPG, SHADOW_IMPORT_UPG2 836517 u2013 Oracle Database 10g: Environment for SAP Upgrade
3. Install the J2EE instance as Add-in to ABAP for BI 7.0 and apply the Support Patch that equivalent to ABAP Support Patch.
4. Run SGEN to recompile programs.
5. Install the Kernel Patch.
6. Missing Variants - (also part of test script) look at the RSRVARIANT table in SE16. If it is empty, then you will definitely need to run RSR_VARIANT_XPRA program - RSR_VARINT_XPRA OSS -953346 and 960206 1003481
7. Trouble Shootauthorizations 820183 - New authorization concept in BI
Regards,
Deva Reddy

Required Unit test Plan for Data migration

Dear All,
I am looking for unit test plan Draft documents/templates which covers
1. Testing tools
2. Methods
3. Error handling
4. Reviews and approvals
The project is a Oracle 10g data migration from one schema to another schema.
It will be a greate help if anyone can forward the same to me.
Thank you.

Hi Vaishali,
You may wish to refer the links below...
https://service.sap.com/instguides --> SAP NetWeaver --> Release 2004s --> Upgrade
https://www.sdn.sap.com/irj/sdn/developerareas/bi
latest on upgrade tp BI7.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
Upgrading BW 3.X to SAP NetWeaver 2004s BI (PDF 2.6 MB)
Front End Migration strategy
Here's the migration strategy: Rolling out the New SAP NetWeaver 2004s BI Frontend Tools
Presentation
http://csc-studentweb.lrc.edu/swp/Berg/Articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt
Here are the frontend requirements:
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Here are the backend requirements in the product availabilty matrix:
https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200615320900001250
Migration of Web Teplates
832713 - Migration of Web templates from BW 3.x to Netweaver
Assign points if this helps.
Regards,
Anil

Test Plan for upgrade SAP and downstream EDI transaltor

We are in the middle of upgrade 4.0B to ECC 6.0 with mercator as a downstream EDI translator.
Can anyone share a test plan or a list of things you test to make sure the data flow from either side is not affected.....

We are in the middle of upgrade 4.0B to ECC 6.0 with mercator as a downstream EDI translator.
Can anyone share a test plan or a list of things you test to make sure the data flow from either side is not affected.....

Do you know if there are plans for video recording?

topic

I think most users who record video and/or take pictures with their phones don't expect greatness in quality. My GF records video on her KRZR phone all the time, then we Bluetooth it to our Macs, or since she can, she'll MMS it to her friends. It's just fun. It's about the opportunity and option to be able to capture moments when they happen, even if not the best of quality, at least you got that moment. Same way I take pictures with my iPhone. If I want quality, I use my digital camera for video and pictures, but it's not always handy to have my digital camera ready to go at any moment. Your mobile phone on the other hand is usually always with you. So why not have the options???
I'm hoping with SDK programmers will make the iPhone video capable, as well as MMS capable. It shouldn't be a tough software write and I'm sure someone will figure out a way to get it done. Hoping SDK won't be too limiting in stopping peoples' software creativity!

What programs are better to use than iChat for video conferencing?

Please help I keep using iChat and it never works any more. What is better to use? Just name some so I can video conference. Thank you for your help

Hi,
Scroll this section fro items 5 through 12
http://www.ralphjohns.co.uk/page5.html#_other
Also this page http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html for APps in general.
9:51 PM Wednesday; January 27, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

JMF issues for video conferencing

I've have been playing with JMF for a few weeks now, trying different things, specifically creating a video conference app, like everybody else here.
I've noticed several weird issues, and was hoping somebody could provide feedback on them;
1) when setting the format for the tracks on a transmitting processor, I get a Class Cast Exception:
TrackControl track[] = processor.getTrackControls();
FormatControl fc = null;
for (int i=0; i < track.length; i++) {
if (!retval && track[i] instanceof FormatControl) {
try {
fc = (FormatControl) track.setFormat(new VideoFormat(VideoFormat.JPEG_RTP));
retval = true;
} catch (Exception e) {
// Always goes here, ClassCastException thrown on Format
System.out.println("Info: exception setting track");
} else {
track[i].setEnabled(false);
2) The image coming from the webcam is flipped, which I transport as so, and just flip the image using drawImage. Is there a better way of doing this, because I assume not all webcams will capture the image flipped, and I have read that encryption works better if the image is not flipped.
3) Client freezes when server stops broadcasting. I'm using a medialocator on the client with the rtp url to the broadcasting datasink. How can I capture the stop broadcasting event on the client and stop the client process cleanly?
4) Server freezes when I stop broadcasting and have a client connected to the rtp locator. I use a processor.close() call on the server which works fine when no clients are connected to the rtp url of the broadcast. When a client is connected the close call hangs indefinately, even when I close the client.
5) Performace is really slow. When the client connects to the media locator rtp url (running on the same machine) it takes upto 2 minutes to initialize, and transfer seems to be sparadic. The transfer often stops and starts again, but I'm not even going through the internet, I'm broadcasting on my local machine, with my client running on the same machine. I use a new laptop with 256MB, performance of the machine is fine.
Any advice would be greatly appreciated.

3) Client freezes when server stops broadcasting. I'm using a medialocator on the client with the rtp url to the broadcasting datasink. How can I capture the stop broadcasting event on the client and stop the client process cleanly?
If your client s/w implements ReceiveStreamListener then you can use
*     ReceiveStream Listener
public void update(ReceiveStreamEvent e)
     RTPManager rtpM = (RTPManager)e.getSource();
     Object obj = e.getReceiveStream();
     if(obj != null)
     ReceiveStream rS = (ReceiveStream)obj;
     DataSource dS = rS.getDataSource();
     if(e instanceof StreamMappedEvent)
          System.out.println("Received an RTP StreamMappedEvent");
     else if(e instanceof NewReceiveStreamEvent)
          System.out.println("Received an RTP NewReceiveStreamEvent");
          try{
          rS = ((NewReceiveStreamEvent)e).getReceiveStream();
          if(participant != null)
               establishPlayer(participant.getCNAME(), dS, rtpM);
          else
               establishPlayer(null, dS, rtpM);
          }catch(Exception eX){
          eX.printStackTrace();
     else if(e instanceof InactiveReceiveStreamEvent)
          System.out.println("Received an RTP InactiveReceiveStreamEvent");
     else if(e instanceof ActiveReceiveStreamEvent)
          System.out.println("Received an RTP ActiveReceiveStreamEvent from '" + participant.getCNAME() + "' with '" + dS + "' DataSource");
     else if(e instanceof RemotePayloadChangeEvent)
          System.out.println("Received an RTP RemotePayloadChangeEvent");
you can do something appropriate in the InactiveReceiveStreamEvent
NOTE there isn't a way to recover the straem after this, so your expectation wo0uld be that the server-side is also shutting the stream down

Is it possible to use a Cisco 2800 IOS H323 voice gateway for video conferencing over ISDN?

I have seen this page and was wondering if what it says actually is possible and works? I also have got a CUCM 8.6 that I would like to use for call routing via my old 2600XM gatekeeper.
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t11/h320gw.html#wp1047659

I have seen this page and was wondering if what it says actually is possible and works? I also have got a CUCM 8.6 that I would like to use for call routing via my old 2600XM gatekeeper.
http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t11/h320gw.html#wp1047659

Video Conferencing in Air 3 for Android/IOS

Hi,
We are in the process of creating a Video Conferencing application for Android and IOS devices, the app would be published on Android and IOS market. I have some quires related to using Air 3.0 for the development:
For Android devices Front facing camera is supported only in Air 3.0, but can we assume Air 3.0 would be officially available by end of this year?
Would this feature available for all Android 2.2 and above devices?
Can we use Flash Media Server/any other streaming server for video conferencing?
I have read in some of the post that Apple store do not allow video streaming with RTMP, is this true? Is there any work-around to use streaming video from within Air app for IOS?
Thanks in advance!
Sangram

I used milkmangames ANE. (50$), because i didnt want to fork the code for each os.
http://www.milkmangames.com/blog/tools/
It was "easy" to set up (quotes: as easy as something complicate can be).
Consumables, or One-time-purchases worked out of the box, but restore, subscriptions and auto subscriptions (like newspapers) had bugs like hell and were unusable.
Also check out here for some free stuff (wich propably works as well as the comercial, "supported" stuff, stupid-me)...
https://github.com/freshplanet/ANE-In-App-Purchase
More ANEs:
http://sleepydesign.blogspot.de/2012/07/ane-free-air-native-extensions.html

Test Plan for Video Conferencing

Similar Messages

Maybe you are looking for