Test plan, Test scripts

Hi friends,
Please any one tell me, what is the Test plan, Test scripts, Test Scenarios and the procedure to create all.

Test plan: How do you want to test, when and where and who will do the testing.
Test scripts: a document which will contain all the test cases / scenarios.
Test scenarios: will list the scenarios to be tested, in a logical order, expected results, actual results, defects, tested by and status.
Procedure to prepare them: Just a word document. You should know the processes and the requirements to do this.
Ravi Thothadri

Similar Messages

  • Test workbench: test plan, test package, test case, test script, test tools

    i want to understand SAP terminology regardsing 'test workbench' terminology - its functions and its sequence.
    we creat test plan first , than test pacakge than assign it to tester.
    can u give sequence of this tcode and its function if u can provide documentaion too,
    tcodes:
    STWB_TC
    STWB_1
    STWB_2
    SCAT
    AND SECATT
    STWB_WORK
    i mwan what are the first step to last step regarding Testworkbench.
    thanks,
    regards.

    Hi ,
    STWB_TC  - Test Case
    STWB_1  - Test Catalogue
    STWB_2 - Test Organizer
    SCAT  - Test the object ( CATT) includes recordings ,parameters
    AND SECATT - Extended CATT
    STWB_WORK - This is a like a worlist to monitor test cases and CATT N ECATT
    Now Test Catalogue includes Test cases and test cases includes CATT which has test scripts which is organized in Test organizer .
    and to monitor this you use STWB_WORK.
    Please reward if useful.

  • Test plan and scripts as accelerators

    Hi
    I'm about to start installing a RDS for PPM 6.0. In the SBS (Step-By-Step Guide) standard test plans and scripts are listed as accelerators. In the RDS package, however, I cannot find any documents describing the test plan or scripts. There are no links to these documents in the SBS.
    Does anyone know where to find these documents for PPM 6.0?
    I can of course create this manually, but it will save a lot of time to use the provided accelerators.
    Thanks!
    Br,
    Lars

    Hi AjdPC,  
    Thanks for your post.
    Yes, this feature released in TFS 2013 Update 3. But as the TFS 2013 Update 4 has released too, so we suggest you upgrade your TFS to TFS 2013 Update 4.
    After you upgraded to TFS 2013 Update 4, if you want use this feature in the old/upgraded team projects, you need configure features for these team project, please refer to the detailed information in this document:
    https://msdn.microsoft.com/en-us/library/ff432837.aspx. For example, if one your upgraded team project created using CMMI 12.2, open this team project’s Web Access admin page, click
    Configure Features>>select the CMMI 2013.4 in the
    Choose a process template to continue textbox, then click Configure button.
    For the custom process templates, we suggest you download the new 2013.4 versions process template from your collection after upgraded to TFS 2013 Update 4, then custom that 2013.4 process templates to instead of that old customized 12.2 process templates,
    then upload the new customized process templates to your collection and create team project use them if you want.
    That not impact your Reporting Services reports.
    As I said, we suggest you upgrade to TFS 2013 Update 4, In-place upgrade or migrate upgrade both are ok.
    Note: make the full backup for your TFS Server databases before any upgrade or migrate operation.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Report available for test cases (manual test script files uploaded)?

    We upload our test script files to the "Test Case" tab, assign it a status.  We are hoping to have a report that would report all test case files and their STATUSES.
    In solar_eval, there is a standard SAP report for test case provided.  However, the field "Status" for the test case file is not included in this report.
    Is there any report available that would give us this status?  If not, in which table does this data come from?  Is there anyway to build a simple SQVI query to extract the list of test cases and their statuses?
    Any help is highly appreciated!

    Hi Jo,
    It's not entirely clear on whether you are look for 'Status' values of the Test Case document itself OR for 'Status' values of the Test(s) conducted on such Test Case documents.
    I believe the following two SOLAR_EVAL reports should resolve either ways:
    (a) SOLAR_EVAL -> Project -> Configuration -> Assignments -> Documentation (Programme called is SAPLSPROJECT_SOLAR_DOC_EVAL_IM) , Tick only 'Test Cases' and switch off other tabs
    (b) SOLAR_EVAL -> Project -> Test -> Test Plan Status Analysis
    Best regards,
    Srini

  • Question of SAP Methodology of Implementation esp. System Testing and Test Script

    Dear SAP Member,
    As a very new and inexperienced customer to the SAP and the business. My company is preparing for the retail shop establishment which part of the preparation includes SAP implementation.
    At first, we strongly believe SAP can fit and serve our business need well. Also, the standard methodology of implementation will be able to deliver the system with expected quality. However, the local implementor disappoint my firm with poor quality delivery and control that result in the perception of uncertainty of the system to be lived.
    The methodology proposed by the implementor composed with
    1) Preparation
    2) Blueprint
    3) Realization
    a) Program development and unit test by vendor
    b) Training
    4) Final Preparation
    a) Integration test by Users
    b) Data conversion preparation
    5) Go-Live and Support
    My problem comes up with phase 4-5
    Problem 1: Unit/functional test performed by implementor . For this activities, how could customer ensure that every single function has been developed or implemented according to the requirement and without error?
    Problem 2: Vendor  provides slot for integration test for 7 days. Is it normal practice that test can be done within this short period?
    Problem 3: Does SAP methodology has the standard quality control, test enter and exit criteria and issue/incident management?
    Problem 4: How should the standard test script look like? What i received from implementor was like functional list rather than script.
    Problem 5: what should be step for conversion apart from the data preparation by users? The local implementor does not explain/elaborate the detailed activities.
    Last but not least, as the customer do not satisfy with the SAP partner (local implementor quality). What should be the process for feedback as to prevent other new customer to face the same problem?
    SK

    SK,
    Thamil has given his view.  Here is another.
    how could customer ensure that every single function has been developed or implemented according to the requirement and without error?
    If this is an issue to you, you can insist that members of your test team participate in unit testing.  You are, after all, the client, and it is your money being spent.  As long as you can furnish testers, who are competent to evaluate unit testing scenarios, you can have them work with the vendor during unit testing.
    Vendor  provides slot for integration test for 7 days. Is it normal practice that test can be done within this short period?
    It depends on what is being implemented.  I have seen implementations which contained over a hundred test scenarios and  over 2000 test scripts; each of which must be tested by multiple functional groups.  1 week is not enough to complete Integration testing in this case.
    Also remember that it is necessary to allow time to correct 'bugs' found during integration testing, and then to re-test after the bugs are fixed.  Except in the simplest of implementations, 1 week may not be enough to accommodate the bug fixes and retests.
    Does SAP methodology has the standard quality control, test enter and exit criteria and issue/incident management?
    Which 'SAP methodology' are you talking about?  Bottom line, the client must insist that the vendor incorporate any methodologies that are required for his business.  Don't assume that your vendor will automatically bring these items to the table, YOU may have to bring them to the table.
    How should the standard test script look like? What I received from implementer was like functional list rather than script.
    ?????  It should look like whatever you want it to look like.  Many companies have existing templates.  If your company doesn't have such a template, ask your vendor for one.  Go over it together with him and make appropriate modifications that meet your business requirements.
    what should be step for conversion apart from the data preparation by users? The local implementer does not explain/elaborate the detailed activities.
    It is impossible to say at the beginning of the project.  Sometime during realization, the client and the vendor will jointly develop a detailed cutover plan.  More importantly, the client will develop a change management plan for the client company, in which all stakeholders in the client company will come to understand how and when ALL of the client's business processes will need to change, and to develop plans for all affected groups.
    Best Regards,
    DB49

  • Parameterizing the target base URL (e.g. Domain name) in e-Test scripts

    Hi there,
    I am currently building all my functional tests (scripts) using e-Test, given a target TG1 machine with URL (http://www.myfirsturl.com)
    Later I am planning to run these tests against another target TG2 environment, let us say (http://www.mysecondurl.com).
    Is there a way to do easily it, thus avoiding the need to re-record all tests again (i.e. if the target system changes)?
    Many thanks,
    Nuno

    Yes, it should be available as part of the eTester group of products. You have to check the checkboxes for these products when you are installing eTester. Also, eManager and eLoad need separate licenses than eTester. Script Updater is a new Utility that is available with eTester 8.2. So if you have an older version, you will not see it. There are other ways to change URLs, using VBA, so if you cannot find Script Updater or can't upgrade to 8.2, you can try them.
    Do you have access to the Archived Empirix Forum? There are some threads that deal with this issue.

  • Can i integrate the test scripts existing in different systems?

    Hi Experts,
    I have a script in ERP and another script in SCM system(two different systems). Now in my master script, i want to integrate both and run as a single script. Can i do that?
    Many Thanks..
    Regards,
    Naresh

    Hi Christoph,  ALL,
    I was not clear with your explanation. let me tell you what i did and what i intend to do.
    1) I have created the sales order creation script in ERP system. Script name: zsalesXXXX.
    2) I have created the second script to run the planning profile  in other system ( SCM system). script name: zplanningXXXX.
    Then i hv created the SDC with RFC destination and target system name as ERP system name for this script.
    3) I want to run both the systems in ERP system using a single script. so, I have created a master script in ERP system. Script name:  zintegrateXXXX to run both the scripts i.e zsalesXXXX (created in ERP) and zplanningXXXX (created in SCM).
    4) In the master script, zintegrateXXXX I could include the first script zsalesXXXX using the REF command.
    5) The problem arises here when i'm trying to add/include the other script zplanningXXXX(created in SCM system) using REF command. It throws an error 'Test script 'XXXXXX' cannot be found in the local system.'
    I did all the recordings using TCD Record.
    Please advice me, Is there any other command which i should have used instead REF?
    or Anything went wrong in the steps i followed?
    Kindly advice. It would be very helpful for me.
    Regards,
    Naresh

  • Config and test scripts of SOP

    Hello All,
    I am working on configuration of Flexible Planning.
       I will have to start on the test scripts/cases soon and I am halfway with the config.It would be great if anybody could help me out with the config as well as test cases documents.
    Thanks
    Ravi

    I have completed the config involved for SOP.
      The scenario is my Client is going to get sales history from a legacy system uploaded to info structure(SXXX) and perform analysis.
      I haven't worked on SOP's RCCP as most of my projects were involved in getting a file uploaded to DM and completing the PE.
    I will have to come up with a graphical and report analysis anD match the RCCP with the sales history provided.Could anyone tell me what are the necessary fields that will be required from the legacy system to map it into SAP for RCCP.
      It would be great if anyone could enlighten me with the process that goes with RCCP and the relevant formulaes necessary to know in the planning table.
    I really appreciate the help in this regard.
    Thanks
    Ravi

  • Intermediate Attributes in Test Script Specifications

    It is great that we can now view the specification of a test script (i.e. input values and expected outcome values for each case) to accompany the test script report, which shows the success or failure of each outcome and case. Thanks Oracle! The specification correctly shows base-attribute values that form part of the test case, but where I have specified intermediate attributes, in order to test only a portion of the rulebase as part of a unit testing process, the input values do not display!
    Is this a bug or by design that I cannot see the values that I am using as input values in the specification? If it is a bug, is it resolved in 10.3? If it is by design, how else does one manage unit test data in a central location?

    Michael, I checked this out on the current pre-release builds of our planned 10.4 product version, and intermediate values that are set in a test case are showing up in the Test Specification.
    If you are seeing this it feels like a bug to me.
    Davin.

  • Test Script scrubbing

    Hi Can any one tell me what is test script scrubbing and how to go about it pls..assured reward points..
    thanks,
    Satish

    Hi
    Iam not aware on scrubbing, but test script is the final document after test plan which will carry all the test cases (testing individual scenarios)  after the development for a new requirement.
    Regards

  • SAP Test scripts

    Hi All,
    Does anyone have SAP SD Test scripts for Sales orders, delivery and contracts. Please help me on the same.
    Thanks,
    Debarshi.

    Test scrips for different companies and different scenarios will be different. Are you asking to give you just the template or the whole test scrips.
    Whole test scrips are immpossible to give as it goes with the details of sales doc type, sales area, customer, material, pricing, plant, shipping point, routs, output types to name a few.
    But the basic cycle for SD remains the same.
    Sales Cycle
    Sales order (VA01), item cat TAN >> Delivery (VL01N) >> Trasfer Order LT03 >> Shipping (VT01N) >> Billing (VF01)
    Third Party
    Sales order (VA01), item cat TAS >> Purchase Req >> Purchase Order (ME21N) >> Goods Receipt (if there) (MIGO) >>  Invoice Verification (MIRO) >> Billing (VF01)
    STO
    Purchase Order (ME21N) >> Delivery (VL10B) >> Goods Receipt (MIGO)
    There are may scenarios like this and these are some of the common stuff. 
    If you planning to create a test script, then, for the templates you can search google and you will get  a lot of them...You are using this to learn yourself, then google. You will get many documents that guides thru.
    Hope this helps...
    Regards,
    Mukund
    Edited by: MukundHS on Feb 12, 2011 1:43 AM

  • Setting timeout for all the web test scripts in the solution

    Hello,
    I have around 16 web test scripts (using VSTS 2010 ultimate version) in my project (in a solution). By default the timeout set for each request is 60 sec. I need to increase the timeout to 180 sec. Currently, I am clicking on each request and modifying
    the timeout parameter from the Properties window.
    Is there any common setting for timeout available which would be acting across all the scripts?
    Thanks.

    Hello,
    We only can set Timeouts for a separate request in Visual Studio Web Test. There is no way to set Timeout for all requests in VS IDE. But you can write you own logic code using
    Timeout Property in a web test plugin to set Timeout for all requests in a web test.
    About how to write a web test plugin, please see:
    How to: Create a Web Performance Test Plug-In
    Best regards,
    Amanda Zhu <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support
    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

  • Urgent need for AP and PO test scripts/scenarios and training user manuals

    Hi There,
    Can anyone send me test scripts/scenarios and training user manuals for AP and PO
    Please send me the docs as soon as possible on [email protected]
    I will really appreciate your help.
    Regards
    Kush

    Dear
    this topics must be included in the testing scenario
    1-Enter Supplier Data     Enter information for a given supplier, including supplier sites/addresses
    2-Create Invoice Batch: Enter information for Invoice Batch header
    3-Create a Standard Invoice: Enter information for a standard invoice in an invoice batch
    4-Invoice Distribution: Enter information details of a selected invoice
    5-Schedule Payment     Create Payment Schedule
    6-Create a Credit Memo: Enter information to create a credit memo
    7-Create Employee Exp:Enter information for an Employee Expense report
    8:Validate an Invoice: Validate an Invoice
    9-Account an Invoice: Create Accounting Entries for an Invoice
    10-Create a Quick Check: Enter data to create a Quick Payment
    11-Select Invoices for Payment:Enter data to create a preliminary list of invoices to pay, review the list, and do some changes.
    12-Format and Print a Payment Batch: Perform tasks required to Format a payment batch
    13-Confirm a Payment Batch:Perform tasks required to Confirm a payment batch
    14-Transfer to General Ledger

  • Importing internal table data from FM to eCATT test script

    Hi all,
    I am working on Workflow project where by i need to post invoices related to purchase orders sent as scanned imaages. Incase all the data in the incoming invoice(scanned) is correct then i am using BAPI_INCOMING_INVOICE_CREATE to post the invoice.
    But when the data is wrong, i need to give the user MIRO transaction pre-populated with the invoice details so that he manually corrects them(after verification) and posts the invoice.
    I understand MIRO is an ENJOY transaction hence BDC doesn't work properly(i have tried with all kinds of options on recording and the problem comes incase of multiple POs) hence i choose to use eCATT.
    The recording worksfine but my real problem is the PO data (multiple PO details for same invoice) is in table form. In all my previous objects related to eCATT we used to upload the file, hence no problem of importing tables.
    But now as i'll call this test script from a function module which has all the POs in the form of internal table, i need to import this into my test script.
    Please any body tell me how to proceed in this case or please suggest me a better a way to record the MIRO.
    Thank you,
    Lakshmi Narayana.S

    Hello Raj,
    First of all thank you for your inputs.
    Yes, I know about Parking an invoice. even i am using it in some scenarios.
    If everything on the invoice matches with the values in SAP then i am posting it using BAPI invoice_create also.
    But for some scenarios like if the PO on the invoice doesnot match with actual PO then i need to create a work item in the Accounts Payable user's inbox and he will change invoice data manually (after getting confirmation and correction) and post it using MIRO.
    Here i need to pre-populate the MIRO with the invoice data so that he can correct and post it.
    Hence i was trying to write a BDC and as MIRO is an Enjoy transaction i thought writing a BDC is not a good idea (i tried writing BDC but had problems) hence i am using eCATT.
    Hope i am clear about my problem. Any inputs to solve this are welcome.
    Thanks,
    Lakshmi Narayana.S

  • In eCATT, How to mention the values as  input parameter during test script

    Hi,
    1. I am just learning eCATT tool. I created a Test Script by recording my transaction. But if i want to execute the recorded transaction with different data then how to store the values.
    2. How to execute my Test Script created in one client to another client of same server. is it just by mentioning the target system or do we have to do anything in anothere client.
    Lakshmi

    Hi
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e0ebec-c9da-2910-689e-b1a22a621c7f
    Manoj Shakya.

Maybe you are looking for