Test stand not showing cutsom columns

I'm working on a custom UI for Test Stand in C# 2010 and I've selected the columns I want shown in the properties window of the Sequence Viewer. When I run the UI, the execution view is defaulting to the standard columns. I tried adding the line ApplicationMgr.UseStepListConfigurations = false to my code, but all that does is turn the execution view background to black. Is there something else I should be doing?
Thanks
Solved!
Go to Solution.

I've tried that, but all it does is turn the background color of the view black, which I did not set (see the attached screen shot). Is there some way of preventing the background from turning black?
Thanks
Attachments:
Screenshot.jpg ‏18 KB

Similar Messages

Not showing the column name

Hi
I am using jdev 11.1.1.3
.i i dragged an adf table from data control.it has got 3 columns.i changed the name of first column as Lang grades.when i run that it is showing the column name as lang grades.then in that table two fields r mandatory.so in the property inspector i put the show required as true.but after that on running it is not showing the column name as lang grades.there is only the star sign for showing the attribute as required only.

Hi,
not enough information. So from your description, a column that is not marked required on its cell renderer component is not displayed at runtime. I am not aware of such a problem and suggest to try a later version of 11g R1 (11.1.1.6) to see if this reproduces. This allows you to exclude a probelm with 11.1.1.3 only
Frank

Out put in Background (SM37) not showing All columns

Hi Folks,
Im creating an out put display for my query in background , we have define an output device , after submitting the query in back ground it just showing me only 10 columns . I mean I its not showing me all columns when I went to SE37-> select job->spool ->view (display).
Why its happening?
Please help me
Cheers
Usman

When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen youll see properties hit that, itll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
You can also decrease the length of variables in query so within 255 characters you can see all report columns.
Hope thisll help you .
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Function module u0091GET_PRINT_PARAMETERSu0092 Not showing all columns

Hello all,
I am using function module GET_PRINT_PARAMETERS
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      DESTINATION    = LOC_DEST
      COPIES         = WF_COPIES
      LIST_NAME      = WF_LISTNAME
      LIST_TEXT      = WF_LISTTEXT
      IMMEDIATELY    = ' '
      RELEASE        = ' '
      NEW_LIST_ID    = 'X'
      EXPIRATION     = WF_DAYS
      LINE_SIZE      = 132
      LINE_COUNT     = 65
      LAYOUT         = 'X_65_132'
      SAP_COVER_PAGE = 'X'
      RECEIVER       = 'SAP*'
      DEPARTMENT     = ''
      NO_DIALOG      = 'X'
    IMPORTING
      OUT_PARAMETERS = WF_PARAMS
      VALID          = WF_VALID.
NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
    PERFORM WRITE_PDF_SUMMARY USING P_VALID P_COND P_ZMGC P_ZOGC P_PDF.
    NEW-PAGE PRINT OFF.
But in my report there are 10 columns and in download file its showing only 6 columns .If I increase that size to X_65_200 Then it shows all columns But its not readable. Please tell me how can I use that fix size X_65_132 & it will show all columns .
Message was edited by:
        megha waykar

You r right,But that program is already developed in following sequence
*==> 1. Create Virtual Spool
            using FUNCTION 'GET_PRINT_PARAMETERS'
*==> 2. Write Report to Virtual Spool. Use NEW-PAGE PRINT ON option.
            NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
            PERFORM WRITE_PDF_SUMMARY USING P_VALID
            NEW-PAGE PRINT OFF.
*===> 3. Prepare Path and set spool number.
*===> 4. Convert List to PDF format.
             Use function 'CONVERT_ABAPSPOOLJOB_2_PDF'
*==> 5. download PDF file
            CALL FUNCTION 'GUI_DOWNLOAD'.
and it's not showing readable download file.
I don't have to change whole coding. I just want to increase that font.

Times ten not showing the column alias as column header in select query.

Hi All,
I am trying to execute following queries on TimesTen database 11.2.2.2.0.
SELECT ROWNUMBER,
floor((to_date(TO_CHAR(SYSDATE,'YYYY-MM-DD hh24:mi:ss'), 'YYYY-MM-DD hh24:mi:ss')-to_date(TO_CHAR(starttime,'YYYY-MM-DD hh24:mi:ss'), 'YYYY-MM-DD hh24:mi:ss'))*24)
|| 'h '
|| mod(floor((to_date(TO_CHAR(SYSDATE,'YYYY-MM-DD hh24:mi:ss'), 'YYYY-MM-DD hh24:mi:ss')-to_date(TO_CHAR(starttime,'YYYY-MM-DD hh24:mi:ss'), 'YYYY-MM-DD hh24:mi:ss'))*24*60),60)
|| 'm '
|| mod(floor((to_date(TO_CHAR(SYSDATE,'YYYY-MM-DD hh24:mi:ss'), 'YYYY-MM-DD hh24:mi:ss')-to_date(TO_CHAR(starttime,'YYYY-MM-DD hh24:mi:ss'), 'YYYY-MM-DD hh24:mi:ss'))*24*60*60),60)
|| 's' TIME_DIFFERENCE
FROM
(SELECT ROW_NUMBER() OVER (ORDER BY USERIDENTITY DESC) ROWNUMBER,
u.*
FROM TBLMCORESESSIONS u
WHERE 1=1
) B
WHERE ROWNUMBER BETWEEN 1 AND 5
and I am getting the follwing output.
ROWNUMBER,
< 1, 8h 52m 34s >
< 2, 8h 54m 24s >
< 3, 8h 54m 13s >
< 4, 8h 55m 6s >
< 5, 8h 54m 40s >
The issue is I should get TIME_DIFFERENCE as column header but it is not showing TIME_DIFFERENCE as the column header & it is calculating the value just fine .
& if same query I execute on oracle 11g database every thing works fine.
please suggest me something that column header is must.
or suggest me any other for query
Edited by: hiaditya04 on Apr 24, 2012 11:05 AM

Hi,
It is similar to bug which is raised in Timesten 11.2.2.2.. BUG 13896607 - COLUMN NAME MISSING FROM A VIEW IN TIMESTEN 11.2.2.2 . If you have MOS access then you can view about this bug. The bug is going to be fix in the future release. The bug basically indicates that we are not displaying the column name properly when select list contains complex expressions. The column itself can be accessed and values are displayed correctly.
Regarding your issue "column TIME_DIFFERENCE not found" , I would suggest you to access the column by position, not by name like below
I believe you are trying to access your column like below
resultset.getString(“TIME_DIFFERENCE”)
Instead of this you can use : -- resultset.getString(2) ( this position should based on the position of the column you are using in the query)
Hope this helps.
Regards
Rajesh

Data is not showing in Column

Hi experts,
I have two Fact Tables F1 and F2 and both having the join with Dimensions D1,D2.
when i pick the data from D1,D2 and measure from F2 and F1 then the report is runnug fine. but when i pick data from D1,D2 and some character from F2 and measure from F1 . then the column from F1 does not showing any data.
Please suggest.
S

This is expected behaviour from the BI Server. F1 doesn't know how to aggregate over the character column from F2.
There are two solutions.
1) Add an aggregation rule to the character column of F2.
If this is not what you want:
2) Create a logical dimension for the character column of F2. Create a hierarchy for this new dimension. Set the logical level of measure F1 to grand total level of new dimension.

Summary Links web part not showing correct column number

Here is my scenario. I have a simple two server dev farm that is using a snapshot of production data. I have migrated the 2010 content db over and everything is running fine. One quirk I have noticed is with the summary links web part. If I add the webpart
to a page, in the configuration settings for the webpart you can create named groups and the next setting is how many columns you want the links to appear in. When I select lets say "4" columns, and I create four groups. When I save and check in
the web part only shows "3" columns instead of 4.
For Example.
I create groups: Group 1
Group 2
Group3
Group 4
In the webpart configuration I select "display number of columns" = 4
When I save that setting and look at the web part the groups will appear as:
Group 1 Group 2 Group 3
Group 4
when in reality if the column setting is = 4, I would expect:
Group 1 Group 2 Group 3 Group 4
So it appears it is behaving as if whatever column number you select, what is displayed is N-1.
Has anyone else had this happen in SharePoint 2013? The same webpart doesn't behave this way in the 2010 production environment where dev gets its content. Any help would be great.
Thanks,

Hi againeyuga,
Yes, I have tested in my SharePoint Server 2013 with December 2013 CU and it works fine. For your environment, I recommend you install the SP1 update.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Edit/Display form does not show site columns after upgrade

https://social.technet.microsoft.com/forums/sharepoint/en-US/580111d4-72ca-4193-87ab-1dfd6082fa88/document-set-library-column-not-showing-up-on-edit-form
Hi all,
I don't think this is related to the above question, but the linked "solution" is as good as I can come up with, however it looks like its possible that ALL the libraries in the collection are suffering the same situation...
WHATS HAPPENING:
our site was migrated to 2013 from 2010 from 2007 and is running in compatability mode around 6-18 months ago. I'm pretty sure the old system is gone too - database backups might be obtainable... not sure.
There are a bunch of "site columns" that are used consistently across the collections libraries (there seems to be a general avoidance of "content types", don't ask me why, I don't know, I also don't know what would be involved in moving
them all to content types as many of the sites "views and webparts" use the content type columns to surface things all over the place, so I suspect it would be a big job), but folks have recently noticed that some documents are missing from various
pages (webparts that are gathering documents from these columns values).
But the problem is that it seems that since the update most (all?) of the document libraries NO LONGER enforce the requirement and litterally only show "name*", and "title" in display and edit properties...
Any ideas on how to get things back to showing the "proper" forms (I can only guess what this was from documentation and screenshots and general guessing based on the "commonness" of the columns in question)? Or is there a way to merge
or migrate "columns" to content types in some way that is either "collection wide" or non-breaking?
ANY assistance would be greatly appreciated!

So just to be sure are you saying that '2010 compatabilty mode' is causing these issues?
Just to be SUPER clear from my end this is what I'm seeing as an example;
For a collection
with site columns
many but not all lists
many but not all list items
--> are missing valid data in the site columns that have been registered for that list.
sample:
name          modified by    doctype     department
item1.docx   username   <blank> <blank>
item2.docx   username    WorkInstruction    Planning
if you click "edit properties" you are presented with ONLY the (I'm guessing) content types fields (eg: for Document you get Name and Title) and NONE of the other fields that should be specified.
However if you hit "save" you can see that the data in these fields returns to the "list view" (however it does not re-enable these fields from being active in the View/Edit properties pages).
Is this something that can be fixed? Or are you saying that we need to backup the DB and restore to a FULL version (not in compatability mode) of SharePoint2013? Or are you saying we need to revert to our PRE update backup and do something?
Its been many months since thsi upgrade was done and the system has changed a lot, so you can imagine we are reluctant to loose much of these changes...
Bazinga!

CRM 2011 Outlook Client not showing all columns in Opportunity Views

Versions:
CRM: 2011 On-Premise - 5.0.9688.1533
Outlook: 2010 Professional - 14.0.6122.5000 32bit
CRM Client for Outlook: 5.0.9690.1992
Basic Problem
The Outlook Client views that show up in Opportunities do not have all the columns that are in the view.
Some of the views do, but not all of them.
Example:
View Name: Won Opportunities
Columns in view: Created on, Location, Quote Type, Scope of Work, Quote Number, Booked Sale Date.....8 other
columns (many custom columns)
Columns in View in Outlook: Icon, Quote Number, Categories, Flag....thats all.
Other Notes
This only happens in the Opportunity section of the Outlook Client.
This does not happen in advanced find in Outlook or anywhere in the web client. This does not happen for any other entity.
This happens on all of our users Outlook clients.
I have tried recreating the view.
No error messages are recording in any logs that I can find.
Any ideas on why this is happening or how to fix it?
Thank you
Paul

1. Are you sure this is a System View and not a User Defined View? Can you take a screenshot of all the availalbe Outlook views when you click on the little down arrow to add a new view? Yes. See the screen shot at the bottom. It is a public
view.
2. What happens when you close the view and add it back? same results.
3. What happens when you restart Outlook? I ask because if you customized your System Views, those are only persistent for a given session. If your restart Outlook, then it should reset the View. we have tried that. and uninstalled Outlook client
and reinstalled. And uninstalled Outlook and reinstalled. Same results. The only view that works for opportunities is the Default Custom View. The strange thing is that the filters are working just fine. just not the columns.
4. A workaround - have you tried creating a new System View similar to the one you want? Yes. same results

Relational Diagram not showing Views column alias (R3.3)

This seems to be a change as well? When I build views I often alias the columns in the view query builder. I would like the diagram to show those alias names rather than the name of the underlying column. Otherwise I have to look at the DDL to see if I got the names the way I want them.
In previous version I thought it showed me the alias (I could be wrong?)

Hi Kent,
I logged a bug for that. It was added support for view header and unfortunately alias was lost.
here is a script you can use to copy alias to header alias. If you have header alias for all columns then header will be included in generated DDL for that view.
Philip
views = model.getTableViewSet().toArray();
for(var i=0;i<views.length;i++){
     cols = views.getElementsCollection().toArray();
     for(var k=0;k<cols.length;k++){
          col = cols[k];
          if("".equals(col.getHeaderAlias()) && !"".equals(col.getAlias())){
               col.setHeaderAlias(col.getAlias());
               views[i].setDirty(true);

POWL not showing all columns

Hi,
I am sending the field catalogs with 60 columns but only 40 cols are displayed. I looped through the IT of field catalog and made all col visibility to abap_true. But still then I am not getting all the cols.
Please help me.
thanks in advance.
best regards,
suresh.

Hi,
There are some limitations on ALV, I know that there are only 255 column max in ALV display(Maybe because of Microsoft Excel). and also there are limitations on the characters number, I'm not sure about that, may not more than 5000 char, you can check it in help.
Hope this helps
Bob

SharePoint list InfoPath form not showing updated column information

I am working with a SharePoint site where I am using custom site columns to update multiple lists. When I update the column information in Site Columns the modifications push to the lists and they update as expected, however, their InfoPath
forms do not and they still reflect old column information in the available Fields. Typically the form notifies upon opening that the list has been updated, and then updates the available form fields to match. Versioning is set to automatically update the
template and to automatically upgrade existing forms. Does anyone have any ideas as to why the form would not pull the updated list columns? Thanks for any guidance!

Hi,
List\library column in InfoPath is stored differently from site column. InfoPath stores the list of Fields that are published to SharePoint document libraries in a local manifest along with the columns which these fields are associated to. This is
accomplished by referencing the column ID in SharePoint (a unique GUID value) with the InfoPath Field. While the site column ID will not change.
You could refer the link below for the scenario related to this difference:
http://support.microsoft.com/kb/2554288/en-us
Regards,
Rebecca Tu
TechNet Community Support

SALV_WD_TABLE not showing all columns in Enhancement package 4

Hi all,
I have a problem when using the SALV_WD_TABLE component in SAP environments with Enhancement package 4. When loading the application not all columns are shown.
Any suggestions?
Thanks,
Regards,
Morten

>
Morten Pedersen wrote:
> Hi all,
>
> I have a problem when using the SALV_WD_TABLE component in SAP environments with Enhancement package 4. When loading the application not all columns are shown.
>
> Any suggestions?
>
> Thanks,
>
> Regards,
> Morten
Hi,
Are you suggesting that it was working in earlier version , now with sp4 it is not working without any modification happened ?
In that case i would raise a Support ticket.
Otherwise , you can see if there a method configure_alv and is there any column deletion is happening !!
There may be a Customizing change happened that the layout is changed and become default.

Union all not showing all columns of 2 Excel files

Hi
File Excel1.xls has 2 columns: first name and last name.
File Excel2.xls has 3 columns: first name, last name and middle name.
Why does "Union all" show only first and last names? I thought that it shows also the middle name. I see it by double clicking box
Union all. In box Union All Transformation Editor
I expect such a line:
Output column name: middle name
Union All Input 1: <#ignore>
Union All Input 2: middle name
Thanks!
gec

Hi,
I think you need to select <ignore> in union all input1 and select middlename in unionall input 2 and Type Middlename in Output Coulmn Name.
As Shown Below.
Hope this answer your question.
If it does mark this as answer please.
Regards
Kaushal

Web form tester did not show

I have installed Forms6i, Forms Server 6i, and JInitiator. When I followed the instruction to run the Web Form Tester. it only opened an empty browser screen. Help. Thanks in advance.
Blake
null

Blake
I'm having the same problem. Have you been able to resolve it.
Thanks in advance
Sandy
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Blake ():
I have installed Forms6i, Forms Server 6i, and JInitiator. When I followed the instruction to run the Web Form Tester. it only opened an empty browser screen. Help. Thanks in advance.
Blake
<HR></BLOCKQUOTE>
null

Test stand not showing cutsom columns

Similar Messages

Maybe you are looking for