Test variants for different AUT variants
We are developing eclipse plug-ins which shall be used in different product variants.
So we have to test certain features in the context of different AUTs.
Therefore we need test cases where the script is exactly the same, but the Contexts have to be flexible. For the different AUT variants we need e. g. different workspaces.
How can we solve this problem?
In principle it goes in the same direction as the Super Context. But we do not want to execute test variants with the same AUT, but for different AUTs.
Hi,
I found out that Launch-Configurations can be used to select test cases, see http://support.xored.com/support/solutions/articles/3000024413-how-to-set-which-aut-test-case-is-for-
However this does not solve my issue when running maven tests (without launch configurations).
I would like to be able to add a test several times to my test suite, each time with a different AUT. So would be great to be able to specify the AUT in the test suite, i.e. to manage multiple AUTs in it.
Currently this seems not possible.
Similar Messages
-
Design and Testing Suggestions for Different Screen Resolutions
Intermediate Dreamweaver CS3 user, in need of "Design and Testing Suggestions for Different Screen Resolutions".
Thank you, J. ChavezAdobe Browser Labb and BrowserShots.org
-
How to execute a MTS (Master Test Script) in SAP ECATT Test Configuration for multiple variants.
I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
Below thread is similar to my requirement but I am not able to understand the solution properly.
eCATT - how to run multiple test scripts with input variables in different test scripts?
Any help in this case would be highly appreciated.
Thanks & Regards,
Vaibhav GuptaI have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
Below thread is similar to my requirement but I am not able to understand the solution properly.
eCATT - how to run multiple test scripts with input variables in different test scripts?
Any help in this case would be highly appreciated.
Thanks & Regards,
Vaibhav Gupta -
Report execution for different variant and Broadcast
Hi experts,
i had a situation where i need to broadcast the same report for 100 vendors, but the information in the report will be different and specific to the vendor.
can i create different variant for each vendor and execute the report at the time in background and broadcast that to the vendors.
Is it possible for broadcasting the reports at a time
any idea will be appreciated
regardsHi akshay
Is it like i can execute the report same time for different variants and broadcast that reports based on that variant to different vendor
for eg User A has to view report with Variant X.
User B has to view same report with variant Y
and so on is this possible for us to do at a time
or need to create different reprots for 100 vendors and broadcast them
Hope if u have any document for broadcasting that shows the steps to do this can you please share -
[svn] 1754: Add more authentication tests for different channels.
Revision: 1754
Author: [email protected]
Date: 2008-05-15 14:43:20 -0700 (Thu, 15 May 2008)
Log Message:
Add more authentication tests for different channels. Fix a couple timing issues in the tests. Some tests were calling logout() and not waiting before running the next test which was failing in some cases.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthenticationTest.mxml
Added Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/JMSAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthenticationTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthenticationTest2.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MultiTopicMessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/JMSAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthenticationTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthenticationTest2.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MultiTopicMessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/JMSAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthenticationTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthenticationTest2.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MultiTopicMessagingAuthConSubscribeTest.mxmlHello Emil,
Thank you for your response.
We have SAP PI 7.11 and we did get it to work with SPNego (Kerberos token) for an SSO interface from a .Net web client using an ActiveDirectory User. It was NOT an easy task, but it worked.
The problem we are facing is that when we setup the Authentication Stack for the XISOAPAdapter component in the NWA as instructed by SAP to support BASIC Auth AND SPNego, the old .Net clients that do not FORCE the Basic Auth try to connect with an NTLM Token (and this doesn't work)
After their first request they receive a response from PI with:
www-authenticate: Basic realm="XISOAPApps"
www-authenticate: Negotiate
Then they choose to send NTLM Token instead of the Basic. This very simple to fix, by forcing the .Net client to send Basic or Kerberos. But we can not change the client side as they are in production env. for some time now, and we have over 200 interfaces with several applications, the impact is quite big...if you know what I mean...
So I thought that maybe it was possible to do some Z XISOAPAdapter component parallel to the original and have two different Auth Stacks.
We have opened an OSS with SAP and we are exchanging msgs for some time now. I'll let you all know how this ended...
Regards.
PS: Would be great to read Michal Krawczyk thoughts on this topic ! thx ! -
Test variant lost while renaming a Function Module
HI,
I have lost a test variant when i tried to rename a function module. Is there any way I can retrieve the test variant now?NOT POSSIABLE.
-
Same material and customer but different prices for different regions
Hi all,
I have a scenario, wherein material and customer are same but different ship-to-parties. Prices vary for the material for different regions.
Kindly suggest how to maintain condition records in this scenario. I have tested for a material for different regions but with the same prices which is working fine, but now I have to do this with different prices.
Your suggestion will be very helpful as this is very important in this business.
Thanks and Regards
AdithyaSwapneal
I have right now only four key combinations for PR00;
1. Customer/Material with release status.
2. Pricelist Category/currency/Material with release status.
3. Material with release status.
4. Price group/Material.
Can this be done with the 2nd Key Combination?
Item data; Sales B tab shows Price List as Retail and Wholesale; here we have only Wholesale Business. Kindly suggest.
Thanks and Regards
Adithya
Edited by: Adi1976 on Jan 18, 2012 9:04 AM -
Different Number range for different objects
HI Gurus
Could you please explain how can we make different Number range for different objects(O,S,P).Can we do with standards or we can go for UserExit??.
Your early Advise will be appreciated.
Thanks
ChandraHi Chandra,
SM31 -> T77IV : 01S -> Number Range Maintenance.
(or SPRO -> Pers Man -> Org Man -> Basic Settings -> Maintain Number Ranges)
For the subgroups
01C (plan variant 01, Object type C) Job
01O (plan variant 01, Object type O) Org unit
01S (plan variant 01, Object type S) Position
Define the following number ranges respectively.
(EX 60000000 69999999)
(EX 70000000 79999999)
(EX 80000000 89999999)
Regards,
Dilek -
VBA inserting form fields, different positions result for different users.
I'm certianly at a loss for wrapping my head around this.
Adobe Acrobat 9 Standard (v 9.5.4)
Excel 2010 (VBA)
The problem: When I create the PDF document from Excel, I search for a string of text in order to capture the Quads for the containing rectangle. Then I use the quads to insert a control with numeric offsets. The problem that I am facing is that the offsets seem to be causing the controls to be in different locations for different users. For example, when I send (-26, -2, 100, 10) {x-offset, y-offset, width, height}; the control aligns exactly where I want it. But when another user user runs the exact same routine, or opens the PDF that I created, the fields are no longer positioned correctly.
Is there some setting that I am missing? EDIT, SOLVED: My Acrobat had a custom point to pixel setting. (Preferences > Page Display > Resolution)
Private Function makePdfControl(ByVal pdfPage As Integer, keyTerm As String, Optional ByVal keyTermLookAhead As Integer = 0, Optional ctrlType As String = "text", Optional cCoords As Variant = 0)
'pdfPage is the target page of the document
'keyTerm is the assembled search term: "Date Shipped >> DATESHIPPED"
'keyTermLookAhead is the number of words assembed into KeyTerm, zero based: "Date Shipped" >> "DATESHIPPED" >> "DATE" = 0, "SHIPPED" = 1
'ctrlType determines the type of control to place on the form; default is text
'cCoords carries an array of integers: x-offset, y-offset, width, and height
txt = ""
Dim fkt As Integer 'counter for keyTermLookAhead
Dim matchFound As Boolean 'flag that a match has been found
Dim maxWords As Integer 'the maximum number of words in pdfPage
Dim coord(3) As Integer 'local array container to provide interface for cCoords
p = 0
matchFound = False
maxWords = jso.getPageNumWords(pdfPage)
Do While p + keyTermLookAhead <= maxWords 'search all words in the target page; break if not found
p = p + 1
For fkt = 0 To keyTermLookAhead
txt = txt & jso.getPageNthWord(pdfPage, p + fkt)
Next fkt
If UCase(txt) <> UCase(keyTerm) Then 'the assembly of terms is complete, check if match
txt = "" 'prepare "txt" for next assembly
matchFound = False
Else
matchFound = True 'we've struck gold, exit the loop preserving val of "p" as the first word in the assembly
Exit Do
End If
Loop
If matchFound = True Then
Dim qtmp() As Variant
Dim q(7) As Double
qtmp = jso.getPageNthWordQuads(pdfPage, p)(0) 'collect the rectangle containing the first word of the search; output is a base-0x7 array
For a = 0 To 7
q(a) = qtmp(a) 'collect the data
Next a
If VarType(cCoords) <> 8204 Then '8204 means that we've inserted an array into the Varient type var cCoords
coord(0) = 0
coord(1) = 0
coord(2) = 100
coord(3) = 15
Else
coord(0) = cCoords(0) 'x-offset value
coord(1) = cCoords(1) 'y-offset value
coord(2) = cCoords(2) 'width value
coord(3) = cCoords(3) 'height value
End If
x0 = coord(0) 'x-offset var
y0 = coord(1) 'y-offset var
w = coord(2) 'ctrl width
h = coord(3) 'ctrl height
x = q(0) + x0
y = q(7) - h + y0
'origin point of doc matrix is lower-left corner
'origin point of control is lower left corner of the rectangle containing the first word of the search phrase
'offsets are placed from this point, negative x shifts to the left, negative y shifts down
'values are in points, not pixels
Set f = aForm.Fields.Add(keyTerm, ctrlType, pdfPage, x, y, x + w, y + h) '(uplf, lwlf, lwrt, uprt) 'add the control to the form using values passed in
End If
End Function
The above function is used while looping through the pages of the created PDF document. I am using the following function to create the document from Excel:
Private Sub exportToPDF()
DoEvents
Application.ScreenUpdating = False
Call showTabs(False)
ActiveWorkbook.ExportAsFixedFormat Type:=xlTypePDF, _
Filename:=pdfPathData, _
Quality:=xlQualityStandard, _
IncludeDocProperties:=False, _
IgnorePrintAreas:=False, _
OpenAfterPublish:=False
Call showTabs(True)
Call locateDoc
Application.ScreenUpdating = True
End Sub
Message was edited by: ilivingston: solvedThanks for the reply, I did spend some time working on this issue... here is what I found...
1) First of all, I did have a custom Points to Inches setting in my Acrobat options... 110 vs 96. Resetting this allowed for me to see the alignment issue that my colleagues were referencing first hand.
As it turned out, my results were better, but still had inconsistency among different workstations. Leading me to..
2) The MSFT creator uses the default printer in some way to create the PDF. Because the different workstations were using different printers, we were getting different results. If everyone used an HP 1320, nobody would see any difference upon creating / adding fields.
The final solution was to change the Application.Printer to a common network printer before the export operation, and return the Application.Printer to the user default after the export completed. This has provided us with a common ground to work upon; we are lucky to have a network printer that can be used for this purpose, as I can see this becoming non-viable in environments where this would be unavailable. -
Uploading data in MM01 for different material types
Hi,
I have a doubt regarding uploading the data in MM01 for different material types.
Generally in MM01, we have different views for different material types. The number of views will vary depending upon the material type that we select.
I have a scenario, where in to upload the data, I have a flat file that consists of data for different message types. So, how to upload the data in such case.
Can anyone help me on the same by providing explanation or sample code...? What would be the possible ways to upload data in such scenario.
That would be of great help.
Thanks & Regards,
Pradeep.See the below code and use FM SELECTION_VIEWS_FIND..
REPORT zjpmuim306 NO STANDARD PAGE HEADING LINE-SIZE 250 MESSAGE-ID
zjpm001.
*& I N B O U N D V I A A B A P : Batch input Session method *
*& Development ID: IM_DD_306_LJP *
*& Report : ZJPMUIM306 *
*& The Purpose of the Object is to interface Create Input Record *
*& for SAP Migration from the Material master of BPCS All the *
*& information received at BPCS is collected into a single record. *
*& By using session method upload data from file ,one item is
*& created for one record *
*& Change Log: *
*& Init Who Date Text *
*& MALIKDH1 Seshu Reddy 26-07-2003 Initial Version *
Constants *
CONSTANTS:c_vkorg(4) type c value 'JP20', " Sales Organization
c_vtweg(2) type c value 'TR' , " Distribution Channel
c_werks(4) Type c value 'JP01' , " Plant
c_viewlist(15) VALUE 'KDEALBSZXVPCFQG'," View list
c_scm_view TYPE msichtausw-dytxt VALUE 'SCM View',
c_sd_view TYPE msichtausw-dytxt VALUE 'SD View',
c_seq_code(2) VALUE 'Z1', " Sequential Code
c_keep(1) TYPE c VALUE 'X', " Keep
c_group LIKE apqi-groupid VALUE 'IM306', " Session Name
c_tcode LIKE tstc-tcode VALUE 'MM02', " Transaction Code
c_blank(1) VALUE ' ', " Blank
c_intls(1) VALUE 'N'. " Logistic Status
Variables *
DATA: g_flag1(1), " Variable to hold
g_flag(1), " Variable to hold
g_file LIKE rlgrap-filename VALUE
'C:\Documents and Settings\seshur\Desktop\HCLT123.CSV'. " File name
Internal tables/ Work area *
Internal Table for Delimter
DATA : BEGIN OF t_delim OCCURS 0,
text(1000),
END OF t_delim.
Internal table for BDC processing
DATA : t_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
Internal table for holding the data which has to be uploaded.
DATA: BEGIN OF t_bpcs OCCURS 0,
matnr(15) TYPE c, " material no
dosage(40) TYPE c, " Dosage form(Local)
appearance(40) TYPE c, " Appearance
idcode(6) TYPE c, " Identification Code
prostformno(10) TYPE c, "SOP
weitab(7) TYPE c, " Weight/tablet
uom1(2) TYPE c, " UOM of Carton
uom2(2) TYPE c, " UOM of Case
carsize(14) TYPE c, " Carton size
cassize(14) TYPE c, " Case size
rupqty(11) TYPE c, " Round up
abvname(3) TYPE c, " Product short name
END OF t_bpcs.
*Internal table for t_bpcs
DATA: BEGIN OF t_mdata OCCURS 0,
matnr LIKE marc-matnr, " Material number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, " Dosage form(Local)
zzjp_aprn LIKE marc-zzjp_aprn, " Appearance
zzjp_con_id LIKE marc-zzjp_con_id," Identification Code
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,"SOP
zzjp_wei_tab(10) type c , " Weight/tablet
zzjp_bio LIKE marc-zzjp_bio,"Biologics Indicator
zzjp_itf LIKE marc-zzjp_itf, " ITF code
zzjp_car(2) type c, " UOM of Carton
zzjp_cas(2) type c, " UOM of Case
zzjp_car_size(11) type c," Carton size
zzjp_cas_size(11) type c, " Case size
zzjp_rupqty(11) type c, " Round up
zzjp_init_ls LIKE marc-zzjp_init_ls, " Logistic Status
zzjp_re1 LIKE marc-zzjp_re1, "Document type(Local)
zzjp_re2 LIKE marc-zzjp_re2, "Report type
zzjp_re3 LIKE marc-zzjp_re3, "Shipping report type
zzjp_pro_id LIKE mvke-zzjp_pro_id," Product output sequence
zzjp_bu_id LIKE mvke-zzjp_bu_id, " Business unit indicator
zzjp_abv_name LIKE mvke-zzjp_abv_name," Product short name
zzjp_abv_id1 LIKE mvke-zzjp_abv_id1," Product short name output
zzjp_abv_id2 LIKE mvke-zzjp_abv_id2," Product short name internal
zzjp_spl_id LIKE mvke-zzjp_spl_id, " Sample internal order
END OF t_mdata.
Internal table for Mara Table
DATA: BEGIN OF t_mara OCCURS 0,
matnr LIKE mara-matnr, " material Number
vpsta LIKE mara-vpsta, " Maintenance status of complete material
pstat like mara-pstat, " Maintenance status
END OF t_mara.
Internal table for Material Master View Selection Screens
DATA: BEGIN OF t_bildtab OCCURS 0.
INCLUDE STRUCTURE mbildtab.
DATA: END OF t_bildtab.
internal table for T_bildtab
DATA: t_bildtab_dup LIKE t_bildtab OCCURS 0 WITH HEADER LINE.
*Work area for T_bildtab internal table(Views Selection)
DATA: BEGIN OF w_data,
flag1 type c,
anzd70 TYPE i,
field1(20) type c,
field2(20) type c,
field3(20) type c,
field4(20) type c,
count(2) TYPE c,
END OF w_data.
Main Processing *
START-OF-SELECTION.
Store data from file into internal table
PERFORM f_uplaod_data.
Transfer the uploaded data into t_mdata internal Table
PERFORM f_process_data.
Selecting The views based on Material number
PERFORM f_view_list.
Open a BDC Session
PERFORM f_bdc_open.
*Selecting the fields from mara table
SELECT matnr
vpsta
pstat
FROM mara
INTO TABLE t_mara
FOR ALL ENTRIES IN t_mdata
WHERE matnr = t_mdata-matnr.
SORT t_mara BY matnr.
SORT t_mdata BY matnr.
Transfer the uploaded data into BDCDATA structure
PERFORM f_process_bdc.
Close The BDC Session
PERFORM f_close_group.
*& Form F_VIEW_LIST *
Routine to used for Calling the function module *
Selection_views_find *
FORM f_view_list.
CALL FUNCTION 'SELECTION_VIEWS_FIND'
EXPORTING
bildsequenz = c_seq_code
pflegestatus = c_viewlist
TABLES
bildtab = t_bildtab
EXCEPTIONS
call_wrong = 1
empty_selection = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_VIEW_LIST
*& Form f612_view_sort *
Routine to used for Selecting The views based on Material Number *
FORM f612_view_sort.
t_bildtab_dup[] = t_bildtab[].
Reading the Internal table t_mara
READ TABLE t_mara WITH KEY matnr = t_mdata-matnr.
TRANSLATE t_mara-pstat USING ' $'.
CLEAR: w_data-flag1, w_data-anzd70.
LOOP AT t_bildtab_dup.
IF t_bildtab_dup-pstat CA t_mara-pstat.
w_data-anzd70 = w_data-anzd70 + 1.
IF t_bildtab_dup-kzanz IS INITIAL.
t_bildtab_dup-kzanz = 'X'.
w_data-flag1 = 'X'.
MODIFY t_bildtab_dup.
ENDIF.
ELSE.
IF NOT t_bildtab_dup-kzanz IS INITIAL.
CLEAR t_bildtab_dup-kzanz.
w_data-flag1 = 'X'.
MODIFY t_bildtab_dup.
ENDIF.
ENDIF.
ENDLOOP.
TRANSLATE t_mara-pstat USING '$ '.
IF NOT w_data-flag1 IS INITIAL.
SORT t_bildtab_dup BY kzanz DESCENDING idxbd ASCENDING.
ENDIF.
*Reading The internal table for T_bildtab_dup
READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
IF t_bildtab_dup-kzanz = 'X'.
WRITE sy-tabix TO w_data-count.
w_data-count = w_data-count + 2.
IF w_data-anzd70 > 18.
w_data-count = w_data-count - 18.
ENDIF.
CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field1.
CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field2.
ENDIF.
READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
IF t_bildtab_dup-kzanz = 'X'.
WRITE sy-tabix TO w_data-count.
IF w_data-anzd70 > 18.
w_data-count = w_data-count + 2.
w_data-count = w_data-count - 18.
ENDIF.
CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field3.
CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field4.
ENDIF.
ENDFORM. " f612_view_sort
*& Form f_uplaod_data *
Routine to used for Uploading the data from file to Internal table *
FORM f_uplaod_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = g_file
filetype = 'DAT'
TABLES
data_tab = t_delim
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF t_bpcs IS INITIAL.
LOOP AT t_delim.
SPLIT t_delim-text AT ',' INTO t_bpcs-matnr
t_bpcs-dosage
t_bpcs-appearance
t_bpcs-idcode
t_bpcs-prostformno
t_bpcs-weitab
t_bpcs-uom1
t_bpcs-uom2
t_bpcs-carsize
t_bpcs-cassize
t_bpcs-rupqty
t_bpcs-abvname.
APPEND t_bpcs.
ENDLOOP.
ENDIF.
ENDFORM. " f_uplaod_data
*& Form F_BDC_OPEN
Routine to create BDC Session to be processed
FORM f_bdc_open.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = c_group
keep = c_keep
user = sy-uname
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE S000 WITH 'Batch input session is created successfully'(T02).
ENDIF.
ENDFORM. " F_BDC_OPEN
*& Form F_PROCESS_BDC
Processing of BDCDATA Structure
FORM f_process_bdc.
LOOP AT t_mdata.
PERFORM f612_view_sort.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0060'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'RMMG1-MATNR'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=AUSW'.
PERFORM f_bdc_field USING 'RMMG1-MATNR'
t_mdata-matnr.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
IF w_data-anzd70 > 18.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
ENDIF.
reading the t_bildtab internal table
READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
IF t_bildtab_dup-kzanz = 'X'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
w_data-field1.
PERFORM f_bdc_field USING w_data-field2 'X'.
g_flag = 'X'.
ENDIF.
reading the t_bildtab internal table
READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
IF sy-subrc EQ 0.
g_flag = 'X'.
ENDIF.
IF t_bildtab_dup-kzanz = 'X'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
w_data-field3.
PERFORM f_bdc_field USING w_data-field4 'X'.
g_flag1 = 'X'.
ENDIF.
IF g_flag = 'X' AND g_flag1 = 'X'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'RMMG1-VTWEG'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM f_bdc_field USING 'RMMG1-WERKS'
c_werks.
PERFORM f_bdc_field USING 'RMMG1-VKORG'
c_vkorg.
PERFORM f_bdc_field USING 'RMMG1-VTWEG'
c_vtweg.
CLEAR g_flag.
CLEAR g_flag1.
ELSE.
IF g_flag = 'X'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM f_bdc_field USING 'RMMG1-WERKS'
c_werks.
PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
ELSE.
IF g_flag1 = 'X'.
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM f_bdc_field USING 'BDC_CURSOR'
'RMMG1-VTWEG'.
PERFORM f_bdc_field USING 'RMMG1-WERKS'
c_werks.
PERFORM f_bdc_field USING 'RMMG1-VKORG'
c_vkorg.
PERFORM f_bdc_field USING 'RMMG1-VTWEG'
c_vtweg.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDIF.
ENDIF.
*Processing of SCM View
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM f_bdc_field USING 'BDC_CURSOR' 'MARC-ZZJP_DOS_FRM'.
PERFORM f_bdc_field USING 'MARC-ZZJP_DOS_FRM'
t_mdata-zzjp_dos_frm.
PERFORM f_bdc_field USING 'MARC-ZZJP_APRN'
t_mdata-zzjp_aprn.
PERFORM f_bdc_field USING 'MARC-ZZJP_CON_ID'
t_mdata-zzjp_con_id.
PERFORM f_bdc_field USING 'MARC-ZZJP_NYU_SOP'
t_mdata-zzjp_nyu_sop.
PERFORM f_bdc_field USING 'MARC-ZZJP_WEI_TAB'
t_mdata-zzjp_wei_tab.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAR'
t_mdata-zzjp_car.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAS'
t_mdata-zzjp_cas.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAR_SIZE'
t_mdata-ZZJP_CAR_SIZE.
PERFORM f_bdc_field USING 'MARC-ZZJP_CAS_SIZE'
t_mdata-ZZJP_CAS_SIZE.
PERFORM f_bdc_field USING 'MARC-ZZJP_RUPQTY'
t_mdata-ZZJP_RUPQTY.
PERFORM f_bdc_field USING 'MARC-ZZJP_BIO'
t_mdata-zzjp_bio.
PERFORM f_bdc_field USING 'MARC-ZZJP_ITF'
t_mdata-zzjp_itf.
PERFORM f_bdc_field USING 'MARC-ZZJP_INIT_LS'
t_mdata-zzjp_init_ls.
PERFORM f_bdc_field USING 'MARC-ZZJP_RE1'
t_mdata-zzjp_re1.
PERFORM f_bdc_field USING 'MARC-ZZJP_RE2'
t_mdata-zzjp_re2.
PERFORM f_bdc_field USING 'MARC-ZZJP_RE3'
t_mdata-zzjp_re3.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
*Processing of SD View
PERFORM f_bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM f_bdc_field USING 'BDC_CURSOR' 'MVKE-ZZJP_PRO_ID'.
PERFORM f_bdc_field USING 'MVKE-ZZJP_PRO_ID'
t_mdata-zzjp_pro_id.
PERFORM f_bdc_field USING 'MVKE-ZZJP_BU_ID'
t_mdata-zzjp_bu_id.
PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_NAME'
t_mdata-zzjp_abv_name.
PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_ID1'
t_mdata-zzjp_abv_id1.
PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_ID2'
t_mdata-zzjp_abv_id2.
PERFORM f_bdc_field USING 'MVKE-ZZJP_SPL_ID'
t_mdata-zzjp_spl_id.
PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM f_bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=YES'.
perform f_bdc_insert.
REFRESH T_BDCDATA.
ENDLOOP.
ENDFORM. " F_PROCESS_BDC
*& Form f_bdc_dynpro
p_prog is the program name to which data is passed *
p_dyno is the screen number to which the data is passed
Routine for populating the BDCDATA structure with the
Screen related information
FORM f_bdc_dynpro USING p_prog
p_dyno.
t_bdcdata-program = p_prog.
t_bdcdata-dynpro = p_dyno.
t_bdcdata-dynbegin = 'X'.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " F_bdc_dynpro
*& Form F_BDC_FIELD
p_fnam is the field name to which value is passed
p_fval is the field value which is passed
p_fnam is the field name to which value is passed
p_fval is the field value which is passed
FORM f_bdc_field USING p_fnam
p_fval.
t_bdcdata-fnam = p_fnam.
t_bdcdata-fval = p_fval.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " F_bdc_field
*& Form F_PROCESS_DATA *
Routine to used for moving data from T_bpcs internal table to *
t_mdata Internal Table *
FORM f_process_data.
LOOP AT t_bpcs.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = t_bpcs-matnr
IMPORTING
output = t_mdata-matnr.
MOVE t_bpcs-dosage TO t_mdata-zzjp_dos_frm.
MOVE t_bpcs-appearance TO t_mdata-zzjp_aprn.
MOVE t_bpcs-idcode TO t_mdata-zzjp_con_id.
MOVE t_bpcs-prostformno TO t_mdata-zzjp_nyu_sop.
MOVE t_bpcs-weitab TO t_mdata-zzjp_wei_tab.
MOVE c_blank TO t_mdata-zzjp_bio.
MOVE c_blank TO t_mdata-zzjp_itf.
MOVE t_bpcs-uom1 TO t_mdata-zzjp_car.
MOVE t_bpcs-uom2 TO t_mdata-zzjp_cas.
MOVE t_bpcs-carsize TO t_mdata-zzjp_car_size.
MOVE t_bpcs-cassize TO t_mdata-zzjp_cas_size.
MOVE t_bpcs-rupqty TO t_mdata-zzjp_rupqty.
MOVE c_intls TO t_mdata-zzjp_init_ls.
MOVE c_blank TO t_mdata-zzjp_re1.
MOVE c_blank TO t_mdata-zzjp_re2.
MOVE c_blank TO t_mdata-zzjp_re3.
MOVE c_blank TO t_mdata-zzjp_pro_id.
MOVE c_blank TO t_mdata-zzjp_bu_id.
MOVE t_bpcs-abvname TO t_mdata-zzjp_abv_name.
MOVE c_blank TO t_mdata-zzjp_abv_id1.
MOVE c_blank TO t_mdata-zzjp_abv_id2.
MOVE c_blank TO t_mdata-zzjp_spl_id.
APPEND t_mdata.
ENDLOOP.
ENDFORM. " F_PROCESS_DATA
*& Form f_bdc_close
Routine to close the BDC Session
FORM f_close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f_close_group
*& Form f_bdc_insert
routine to input batch data into the Transaction MM02 from the
session created
FORM f_bdc_insert.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = c_tcode
TABLES
dynprotab = t_bdcdata
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f_bdc_insert
Reward Points if it is useful
Thanks
Seshu -
Single source for different online help guides
I am glad that the single source layout pod in RH7 supports
different channels.
I also need to output to different online webhelps using
shared topics. This is what should be called single source.
Is it the best practice to create a set of taylored and
overlapping TOCs for a related set of online helps?
My working environment consists of a single software product
with different user interfaces for different types (and levels) of
users. For each type of interface, a different webhelp is mounted.
How can I make sure that the online help title displayed in
the web help browser tab is the correct one for each variation of
the online help?Single source is anything that lets you get more than one
output from one source, be those outputs ten different webhelp
outputs or just one and a printed document output.
You can have as many webhelp outputs as you can manage. Right
click and add new ones or copy existing ones as a base.
Best practice depends on your content. You can have different
TOCs for each output or you can have a smaller number and apply
conditional tags. So with say 10 outputs you could have just three
or four TOCs and apply conditional tags to vary them. It's whatever
works best for you and can be understood by anyone you work with.
The scenario you describe would be ideal for the way RH
works.
The title bar and browser tab take their text from the
Project Title in Project Settings so you will need to change that
for each output. -
Test configurartion for QTP script
Hi all,
we used a QTP script part of a framework.
The Driver sheet, executionsheet were all present in Local desktop.
This script is stored in solution manager ECATT as external script.
My doubt is
1. While defining a test configuration for QTP script what variant do we need to maintain as all the required input as available in local desktop which will be got from the code.
2. Is there a way to maintain the required input sheets centrally in solution manager and QTP script being able to download required the input sheet from solution manager.
Kindly advice ...I searched in the net but didn't get any information.
Thanks,
Subhashini.Hi all,
we used a QTP script part of a framework.
The Driver sheet, executionsheet were all present in Local desktop.
This script is stored in solution manager ECATT as external script.
My doubt is
1. While defining a test configuration for QTP script what variant do we need to maintain as all the required input as available in local desktop which will be got from the code.
2. Is there a way to maintain the required input sheets centrally in solution manager and QTP script being able to download required the input sheet from solution manager.
Kindly advice ...I searched in the net but didn't get any information.
Thanks,
Subhashini. -
Doing the same task for different data.. Do I need Queues? How to use them if yes?
Hello all,
I have created a VI which is getting data from some FTP server and then after comparing with the HDD specified folder copy the missing data from the FTP ... Description is also in the VI. There are few things I need to ask.
1) The email sending VI gives error 1172..What could be the reason .. is it firewall.. or is there any mistake in the code?
2) As you people are experts so I really like any suggestion to improve the VI..
3) The most important .. Currently this VI can only perform the whole task for one FTP folder. Actually my task is I need to check for 4 different FTP folder on different servers..its not 4 different folder in one FTP .. its 4 different FTP.Now my question is how I can do this: First it compare and copy from FTP1.Then FTP2... and so on.. How can I change the data for the cluster for different FTPs? Do I need to use queues? If yes how because I don't have any experience with queues.
I will really appreciate is someone can either provide me the relevant example or can give me some idea.
The main VI is the 'TASK START'.VI please find the attached files.
Thanks
Regards,
Naqqash
Naqqash
Attachments:
Project.zip 151 KBHi Peter,
Thank you very much for your reply. I have understood your idea but there are few problems.
Please see the attached "Final test.vi".. actually my top level vi should be like this.. due to this reason I need to develop the cluster like one with name "Settings" as shown in Enum FTP events.vi.. In this cluster all the data types are not constants (but can be set as constants) and further all of them are not of same type so whenever I try to create as you created I have got error, wire broken..so what do you think i should do.. In this cluster there are different types of data .. string, path, numeric, array and a cluster with name file properties also... can't figure out what to do..I know things are little scattered and wiered but due to lack of experience, I guess, I am now a little bit confused for this matter. I
hope guys here in the forum will help me as you guys always did.
Naqqash
Attachments:
Final test.vi 11 KB
Enum FTP Events.vi 14 KB -
we are using VS 2013, I need to run multiple Coded UI Ordered Tests in parallel on different agents.
My requirement :
Example: I have 40 Coded UI Test scripts in single solution/project. i want to run in different OS environments(example 5 OS ). I have created 5 Ordered tests with the same 40 test cases.
I have one Controller machine and 5 test agent machines. Now I want my tests to be distributed in a way that every agent gets 1 Ordered test to execute.
Machine_C = Controller (Controls Machine_1,2,3,4,5)
Machine_1 = Test Agent 1 (Should execute Ordered Test 1 (ex: OS - WIN 7) )
Machine_2 = Test Agent 2 (Should execute Ordered Test 2 (ex:
OS - WIN 8) )
Machine_3 = Test Agent 3 (Should execute Ordered Test 3
(ex: OS - WIN 2008 server) )
Machine_4 = Test Agent 4 (Should execute Ordered Test 4 (ex:
OS - WIN 2012 server) )
Machine_5 = Test Agent 5 (Should execute Ordered Test 5 (ex:
OS - WIN 2003 server) )
I have changed the “MinimumTestsPerAgent” app setting value
as '1' in controller’s configuration file (QTController.exe.config).
When I run the Ordered tests from the test explorer all Test agent running with each Ordered test and showing the status as running. but with in the 5 Test Agents only 2 Agents executing the test cases remaining all 3 agents not executing the test cases but
status showing as 'running' still for long time (exp: More then 3 hr) after that all so its not responding.
I need to know how I can configure my controller or how I can tell it to execute these tests in parallel on different test agents. This will help me reducing the script execution time.
I am not sure what steps I am missing.
It will be of great help if someone can guide me how this can be achieved.
-- > One more thing Can I Run one Coded UI Ordered Test on One Specific Test Agent?
ex: Need to run ordered Test 1 in Win 7 OS (Test Agent 1) only.
Thanks in Advance.Hi Divakar,
Thank you for posting in MSDN forum.
As far as I know, we cannot specify coded UI ordered test run on specific test agent. And it is mainly that test controller determine which coded UI ordered test assign to which test agent.
Generally, I know that if we want to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller.
We will need to change the MinimumTestsPerAgent property to 1 in the test controller configuration file (QTControllerConfig.exe.config) as you said.
And then we will need to change the bucketSize number of tests/number of machines in the test settings.
For more information about how to set this bucketSize value, please refer the following blog.
http://blogs.msdn.com/b/aseemb/archive/2010/08/11/how-to-run-automated-tests-on-different-machines-in-parallel.aspx
You can refer this Jack's suggestion to run your coded UI ordered test in lab Environment or load test.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/661e73da-5a08-4c9b-8e5a-fc08c5962783/run-different-codedui-tests-simultaneously-on-different-test-agents-from-a-single-test-controller?forum=vstest
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
T-codes to get payment run report for different company codes?
Hello sap gurus,
I have a scenario like -
> use of IDocs to process vendor and employee payments. Both bank transfers and checks will be processed through interface.
Now, What is the t-code to get report for payments for different customer, comp codes and vendor?
I am new to SAP in testing.
Appreciate ur help......
Regards,
Shamsher
Edited by: shamsher123 on Jun 4, 2010 11:52 AMHello,
See the List below hope this will help.
MIR5 - Display List of Invoice Documents
S_ALR_87012105 - List of Down Payments Open On Key Date - Vendors
S_ALR_87012085 - Vendor Payment History with OI Sorted List
S_P99_41000099 - Payment List
Prashant Rathore.
Maybe you are looking for
-
No option to set search provider after updating Lu...
Hi there, I have updated my Lumia to Win 7.8 and I have all new features but one is missing; option to set google as search provider in Internet explorer. I can't restore my phone to try install upate once again due to an error 801812E0. Any idea how
-
My iPhone 5 screen has blacked out.
Hi there, My iPhone 5 screen has just randomly blacked out on me. I sent a text message to someone then lay my phone down on the sofa and when I picked it up again moments later the screen did not work and it is completely unresponsive. When I ring m
-
Don't get updates in shared calendar
Hi all, Me and my wife are sharing a calendar in iCloud, we bth run iOS 5 and have an iMac where we add, edit and remove appointments. She receives an email notification when a new appointment is added, but I don't. I am the owner of the calendar, an
-
I have an M Audio Radium 49 connecting via USB. Not used it since upgrading to OS 10.4.2 now it aint there no more[midi devices] and the darn thing works no longer in Garageband. Any ideas anyone?
-
Can any body please tell me how to change the sales order(VA02) print out script. what are the basic step to change it ??? Regards Nitin Varshney