Testing of Java J2ME on BREW simulator
Dear friends,
I have developed a Java J2ME application and wishes to test it on a BREW simulator. I understand that the simulator runs BREW applications written in C/C++. I sincerely like to seek your kind assistance on where I can find the necessary JVM and J2Bridge to test my Java application on the BREW emulator. This will aid in my porting of my Java application onto the BREW platform.
Any suggestion on BREW emulators supporting JAVA and further infomation is greatly appreciated!
Many thanks!
Regards,
Chai Ming Jie
Rumour has it BREW 2.0 and upwards supports running MIDlets. I haven't used it, don't know if it works (in fact, rumour also has it that it doesn't work on any of the phones available today), but that's the word.
I'm sure you'll get better answers to a question like this on a BREW forum, though.
shmoove
Similar Messages
-
Graphical benchmark for Java (J2ME) phones and PDAs: JBenchmark
JBenchmark measures the performance of Java (J2ME) enabled phones and PDAs, by running 5 small tests, each lasting for 10 seconds:
1. Text
2. 2D Shapes
3. 3D Shapes
4. Fill Rate
5. Animation
Check results and download software at www.jbenchmark.com!Wow.. i thought I bought a good phone. But reading the JBenchmark for the SonyEricsson T610 wasn't fun at at all. Are other phones really up to 3 times faster? Anyone with experiance from testing with other phones?
-
How to print directly to printer using USB and Bluetooth from Java (J2ME) app.
I write mobile phone apps in Java (J2ME). I want to print directly to a printer via USB and via Bluetooth. I cannot use a print job with the Java available to me. Once upon a time you could just send text and print control characters to a printer. I would like to be able to do that again. Alternatively could you provide a 'skeleton' data stream into which I could insert my code to produce what is sent to the printer when a print job is used with Java on a laptop or PC. I just want to sent simple text with a little formatting.
Hi,
As far as printing to devices not all devices support Bluetooth. Many devices support Bonjour protocal, IPP. The main print port is 9100. Additionally you can see what IO protocols are supported on a product by looking at the EWS (Embedded WebServer) there should be a networking page with that information. Port 9100 is your basic print port and different devices will support different formats (PDF, JPEG, PCL5, PCL6). If there is an API you can find (i am not familiar with J2ME availible calls, then you can use those and send the data to port 9100. Again that is the basic path most printers will accept. not all devices support bonjour not all device support bluetooth etc... Hope that helps and good luck.
I am an HP Employee. -
I want to test a java program[UDDI JAVAse1.4/2004] that uses:
I want to test a java program[UDDI JAVAse1.4/2004] that uses:
1.http://test.uddi.microsoft.com/inquire
2.https://test.uddi.microsoft.com/publish
wel las of today(now) these urls changed or remain and are functional the same? if non, tell me new ones?According to Wikipedia
IBM, Microsoft, and SAP announced they were closing their public UDDI nodes in January 2006.UDDI didn't take off as much as was hoped and public UDDI nodes never were much use. These days UDDI is used very rarely and mostly in-house. -
How do you test your Java Pricing UserExits in eclipse?
How do you test your Java Pricing UserExits in eclipse?
do you have to deploy the java class on vmc server to debug it
Yes
- So, the classes have to be compiled error free and uploaded to VMC.
- VMC has to be restarted to test your classes.
- You have to set the log levels appropriately for your classes using SM53 / SM52.
- You can also perform VMC debug through Eclipse.
all of the details are available in the pricing exit manual* -
Does ATS load testing support Java RMI and T3 protocol?
Hi Experts,
Does ATS load testing support Java RMI and T3 protocol or EJB(J2EE)?
Thanks!Joseph,
Oracle Application Testing Suite is mainly used for testing of applications from a end user perspective and offers an intuitive capture/replay for web, Siebel, EBS, JDE, Fusion apps or SOA based application through WebServices WSDL imports.
The scripting environment (Oracle OpenScript) does not support script creation by recording JAVA RBI or T3 protocol as we lack a recorder for it, but the scrips are created as pure JAVA code so you could use the JAVA language to write a small RMI cor T3 client for your testing.
We have customers that have used Application Testing Suite to test non-UI based testing, like: JMS, FTP, Tuxedo and others, but it require a bit of coding.
Please let me know if you would like to know more or discuss your options
regards
Mikael Fries
Principal Product Manager / Oracle -
What are popular automated tests for Java GUI applications
Hi, I want to find a good automated test for java swing for my project. I have a list of UISpec4j, JFCUnit and Abbot.
There is also jemmy. I haven't used any of them, though...
-Puce -
Testing of Java applications over various networks?
Hi,
If we write an application in java and lets say it works on a device running on GPRS network. How would we know if it would run fine over CDMA, CDG, WCDMA or other networks?
Regards,
Mansoor Chatha
SQA assosiate,
Research In Motion
[email protected]There are emulators that allow you to test your J2ME application on various devices, however the emulators do not emulate the network topology of those device, bur rather simply redirect the network calls to the pc's local tcpip stack.
In order to effectively test your applications on various network enviroments you would physically have to load and run your app on a device connected to such an enviroment.
Hope this helps. -
How to test a Java Web Service locally?
I developed simple java web services.
Now I want to test them locally.
I want to expose my web service through my Web Server(Tomcat).
How can I expose that webservice?
After that I want to access my web service through a Internet Browser.
Is it possible to test that web service locally (localhost)?
My computer is not connected to a network or internet.
My OS is Windows XP Professional.I just set up TCPMON. Considering it is free and the fact that it has more than just a basic UI, I am quite impressed. I also use SOAPscope, which is another great tool, but I am looking for a free option.
My issue: I set up TCPMON to sniff messages sent over HTTPS through port 8080. But I am getting encrypted messages upon sending the SOAP request as follows:
�b�b�b�bvC�Ym�)f��OvC�Ym�)f��W�O�k�v�W��dQ�$�{� �4�����F�������vO���XEC
)��~9gl^�OvC�Ym�)f��W�O�k�v�W��dQ�$�{� �4�����F�������vO���XEC
)��~9gl^�OvC�Ym�)f��W�O�k�v�W��dQ�$�{� �4�����F�������vO���XEC
)��~9gl^�
Any clue why?
Your help is greatly appreciated.
Aish -
How do I test a Java card applet with different AIDs on the fly?
... Like sweeping cards from employees in a queue of people lining up in the morning?
When I created my applet, the aid is a fixed value inside the class.
Whenever I wanted to test it with another value, I changed that AID and rerun the applet.
I find it very cumbersome that needs to be rerun and rerun, over and over again.
How do I test the applet easily with any values of AIDs that I'd like to put in, on the fly.
I know I can't simulate the sweeps of card in the applet because I can't have a main method with a signature
of Strings[] args or String[] args. I can only have JUnit to help me out, but still java card doesn't allow either
main(Strings[] args) or TestCase to inherit from.
Thanks
Jackyour question is hard to understand but:
an applet always has one definite AID and you cant change it after install as far as i know
a) you want to test many cards with diffrent AIDs?
->send a list of select commands and check the return values
b)you want one card with the same applet to be available for many AIDs?
->install many dummy applets forwarding the commands to one core applet
c)i think i didnt get your point :/ -
Do I need to pass a applet test with Java before the Flash player will function?
I have downloaded the unstall and install programs for Adobe Flash Player and followed all the steps poster, "eidnolb" noted to prior poster greenie41180 on March 6th, 2010, 8:05PM. The flash player test did not work. I also do not see applets, when I use the latest version of Java on an applet test. I might try reinstalling IE8, or going to IE7 and reinstalling Flash Player. Gawd! hours have been used, just trying to get Flash Player going so I can resume watching the tutorials at Mathtutordvd.com.
What other troubleshooting steps can be taken? I have tried everything eidnolb suggested in prior posts.
Hello everyone, When I try to download the Flash player I get the error message listed above. I turned off the firewall and virus modes on my TrendMicro protection program, when downloading the player. I already have Java 6, update 18 in the system. I restarted the computer. I also adjusted the configurations for Javascript and ActiveX under the "Tools" menu for the Security and Advanced tabs of Internet options. I have Windows XP, service pack 3, with Internet Explorer 8.
Also, I tested the recent, most updated program, Java and I still can not see an applet. I have spent 7 or more hours on this. I thought initially this process was going to be straight forward. I desperately need this Flash player so I can learn math at the streaming video site called, Mathtutordvd.com Oh! gosh maybe someone here can help me help myself by giving me more troubleshooting steps. I did follow Adobe's troubleshooting steps, but I still get the same, above error box with, MSXML2.XSL Template 3.0 (Original exception: undefined)
I hope, eventually to watch the streaming site, once this Flash Player is loaded. I really do not understand what is going on here. Thanks for your help.
Information: Windows\System32\Macromed\Flash
These items are in the Flash folder:
Flash10e.ocx version 10.0.45.2
Install text document
Uninstall_activeX 10.0.45.2
FlashUtil10e Adobe Flash Player Helper 10.0.45.2
Should not FlashUtil10e be listed as FlashUtil10e.exe ???
FlashInstall text document
Genuinst Microsoft application file version
6.0.2800.1531 KB913433 Setup Information
This is the Java version and also, these are listed and enabled in the “Manage add-ons” for Internet Explorer 8: C:\Program Files\Java\jre\bin
Java Plug-in 1.6.0_18 ActiveX control
File: npjpi160_18.dll version: 1.6.0.18
Java™Plug-in 2 SSV version: 6.0.180.7 , file: jp2ssv.dll
JQSIEStartDetectorImpl Class version: 6.0.180.7, file: jqs_plugin.dll for program Files\Java\jre6\lib\deploy\jqs\ie
Adobe PDF link Helper, version 9.0.0.332
File: AcroIEHelperShim.dll
For C:\Program Files\Adobe the listed files are:
Reader 9.0
Acrobat.com
Photoshop 7.0
Also, under common files: C:\Program Files\Common Files\Adobe\Acrobat\ActiveX the following files are present:
Pdfshell.dll
AcroIE HelperShim.dll
AcroPDF.dll
AcroIEHelper.dll
There is also a file called Adobe AIR under the Common Files category.
Next, there are some Java undate files listed as: C:\program Files\Common Files\Java\Java Update
Also, listed in the “Manage add-ons” is: Shockwave Flash Object, Flash10e.ocx,
which is enabled.
When I checked the C:\program Files I reviewed all listed folders and did not see folders named, Adobe Flash Player 10 ActiveX, or Adobe Flash Player 10 plug-in. The only folder found label with Adobe, was the prior mentioned folder, Adobe containing Reader9.0, Acrobat.com, and Photoshop7.0.Hi, May I suggest that you read your previous 3 threads that have been responded to?
You need to stop starting threads, this is the 4th one. You need to stop copying and pasting from the first thread to the new threads that you are starting. It serves no positive purpose.
eidnolb -
How to launch my RESTful TEST with JAVA EE application in NetBeans 6.5
Hi, I want to TEST my RESTful WebService in my JAVA Enterprise Application.
I have a bit database in my EJB Module. Resuming, I have two modules (EJB + WAR) and Enterprise Application (JAVA EE that contains the before modules). Appears two kind of errors:
1) When I only deploy JAVA Enterprise Project an then I run my TEST Restful, appears an error that says: "Another module has been deployed" . This error is about JAVA Enterprise Application has been deploy before.
2) If I only deploy TEST Restful, this doesn't find Facaderemote class of my EJB Module, because WAR Project hasn't the EJB references.
Thanks a lot.VM7, welcome to the forum. Please don't post in threads that are long dead and don't hijack other threads. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
I'm locking this thread now.
db -
Hy, My name is Alexandre and I develop Java games.I am with the following problem:I have some old games here in the company that need to be ported to the brew solution, but they don�t have the source-code anymore(just the jars files), is there any tool wich I can use to port a java application to a brew application (some kind of convertor)???thanks for the help
Hy, My name is Alexandre and I develop Java games.I am with the following problem:I have some old games here in the company that need to be ported to the brew solution, but they don�t have the source-code anymore(just the jars files), is there any tool wich I can use to port a java application to a brew application (some kind of convertor)???thanks for the help
-
Workshop 9.2 - Web Service Test Client - java.util.NoSuchElementException
I've found an issue with the Web Services Test Client while developing a web service application in the Weblogic Workshop 9.2 tool. The same schema / code in Workshop 8.1 SP4 works okay in its version of the test client.
The error seems to manifest itself, when I add the "addresses" element to the "locations" element.
The error displayed in the weblogic service console is
<BLOCKQUOTE>
java.lang.RuntimeException: java.util.NoSuchElementException
at weblogic.testclient.ConnectionState.createWsdl(ConnectionState.java:63)
at Controller.refreshWsdl(Controller.java:304)
at Controller.begin(Controller.java:173)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:878)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:808)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:477)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:305)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:335)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:51)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:419)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:95)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2042)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:90)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2114)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:554)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:851)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:630)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:157)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3211)
Caused by: java.util.NoSuchElementException
at java.util.AbstractList$Itr.next(AbstractList.java:427)
at weblogic.testclient.RequestTemplate.addSoapForParameter(RequestTemplate.java:341)
at weblogic.testclient.RequestTemplate.addSoapForParameter(RequestTemplate.java:334)
at weblogic.testclient.RequestTemplate.addSoapForParameter(RequestTemplate.java:334)
at weblogic.testclient.RequestTemplate.addSoapForParameter(RequestTemplate.java:334)
at weblogic.testclient.RequestTemplate.addSoapForParameter(RequestTemplate.java:334)
at weblogic.testclient.RequestTemplate.addSoapForParameter(RequestTemplate.java:334)
at weblogic.testclient.RequestTemplate.addSoapForParameter(RequestTemplate.java:334)
at weblogic.testclient.RequestTemplate.addSoapForParameter(RequestTemplate.java:334)
at weblogic.testclient.RequestTemplate.addSoapForParameter(RequestTemplate.java:334)
at weblogic.testclient.RequestTemplate.createMessageBody(RequestTemplate.java:220)
at weblogic.testclient.RequestTemplate.buildRequest(RequestTemplate.java:169)
at weblogic.testclient.RequestTemplate.createRequestTemplate(RequestTemplate.java:103)
at weblogic.testclient.RequestTemplate.<init>(RequestTemplate.java:85)
at weblogic.testclient.WebServiceOperation.<init>(WebServiceOperation.java:120)
at weblogic.testclient.WsdlOperationParser.createOperation(WsdlOperationParser.java:115)
at weblogic.testclient.WebService.createOperation(WebService.java:242)
at weblogic.testclient.WebService.<init>(WebService.java:86)
at weblogic.testclient.Wsdl.parseWsdl(Wsdl.java:127)
at weblogic.testclient.Wsdl.<init>(Wsdl.java:59)
at weblogic.testclient.ConnectionState.createWsdlFromHttpUrl(ConnectionState.java:113)
at weblogic.testclient.ConnectionState.createWsdl(ConnectionState.java:54)
at Controller.refreshWsdl(Controller.java:304)
at Controller.begin(Controller.java:173)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:878)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:808)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:477)
</BLOCKQUOTE>
The code in the Web Service control is...
<BLOCKQUOTE>
package services;
import javax.jws.WebMethod;
import javax.jws.WebService;
import weblogic.jws.WLHttpTransport;
import au.com.suncorp.services.payment.schema.x0.RequestIdDocument;
import au.com.suncorp.services.payment.schema.x0.VendorDocument;
@WebService(targetNamespace="http://suncorp.com.au/services/payment/wsdl/0")
@WLHttpTransport(serviceUri="services/PaymentService")
public class Payment {
@WebMethod
public RequestIdDocument setupVendor(VendorDocument request) {
System.out.println(request.xmlText());
RequestIdDocument result = RequestIdDocument.Factory.newInstance();
RequestIdDocument.RequestId response = result.addNewRequestId();
response.setCorrelationId("CorrelationId-" + request.getVendor().getName());
return result;
</BLOCKQUOTE>
The XSD schema is as follows....
<BLOCKQUOTE>
<?xml version="1.0" encoding="UTF-8"?>
<schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://suncorp.com.au/services/payment/schema/0"
xmlns:tns="http://suncorp.com.au/services/payment/schema/0">
<!-- ***************************************************************** -->
<simpleType name="correlationIdType">
<annotation>
<documentation>
The CorrelationId field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="estTimeIntervalType">
<annotation>
<documentation>
The Estimated Time Interval field.
</documentation>
</annotation>
<restriction base="integer"></restriction>
</simpleType>
<simpleType name="vendorIdType">
<annotation>
<documentation>
The Vendor Id field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="nameType">
<annotation>
<documentation>
The Vendor Name field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="persistenceType">
<annotation>
<documentation>
The Persistence field.
</documentation>
</annotation>
<restriction base="boolean"></restriction>
</simpleType>
<simpleType name="ownerType">
<annotation>
<documentation>
The Owner field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="sourceReferenceType">
<annotation>
<documentation>
The vendor Source Reference field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="abnType">
<annotation>
<documentation>
The vendor ABN field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="countryType">
<annotation>
<documentation>
The Country field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="stateType">
<annotation>
<documentation>
The State field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="cityType">
<annotation>
<documentation>
The City field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="postcodeType">
<annotation>
<documentation>
The Postcode field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="gstRegisteredType">
<annotation>
<documentation>
The GST Registered field.
</documentation>
</annotation>
<restriction base="boolean"></restriction>
</simpleType>
<simpleType name="withHoldingType">
<annotation>
<documentation>
The WithHolding field.
</documentation>
</annotation>
<restriction base="boolean"></restriction>
</simpleType>
<simpleType name="vendorClassType">
<annotation>
<documentation>
The Vendor Class field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="statusType">
<annotation>
<documentation>The Status field.</documentation>
</annotation>
<restriction base="string">
<enumeration value="ACTIVE">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="INACTIVE">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
</restriction>
</simpleType>
<simpleType name="locationIdType">
<annotation>
<documentation>
The Location Id field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="effectiveDateType">
<annotation>
<documentation>
The Effective Date field.
</documentation>
</annotation>
<restriction base="dateTime"></restriction>
</simpleType>
<simpleType name="addressIdType">
<annotation>
<documentation>
The AddressId field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="addressType">
<annotation>
<documentation>
The Address field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="contactIdType">
<annotation>
<documentation>
The ContactId field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="contactMethodType">
<annotation>
<documentation>
The Address field.
</documentation>
</annotation>
<restriction base="string">
<enumeration value="FAX">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="PHONE">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="EMAIL">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
</restriction>
</simpleType>
<simpleType name="dispatchMethodType">
<annotation>
<documentation>
The Dispatch Method field.
</documentation>
</annotation>
<restriction base="string">
<enumeration value="EFT">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="FAX">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="EMAIL">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
</restriction>
</simpleType>
<simpleType name="currencyType">
<annotation>
<documentation>
The Currency field.
</documentation>
</annotation>
<restriction base="boolean"></restriction>
</simpleType>
<simpleType name="payGroupType">
<annotation>
<documentation>
The Pay Group field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="payHoldType">
<annotation>
<documentation>
The Pay Hold field.
</documentation>
</annotation>
<restriction base="boolean"></restriction>
</simpleType>
<simpleType name="freightTermsType">
<annotation>
<documentation>
The Freight Terms field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="payHandlingType">
<annotation>
<documentation>
The Pay Handling field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="delayDaysType">
<annotation>
<documentation>
The Delay Days field.
</documentation>
</annotation>
<restriction base="integer"></restriction>
</simpleType>
<simpleType name="payFromBankType">
<annotation>
<documentation>
The Pay From Bank field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="paymentInstructionsType">
<annotation>
<documentation>
The Payment Instructions field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="paymentTermsType">
<annotation>
<documentation>
The Payment Terms field.
</documentation>
</annotation>
<restriction base="string">
<enumeration value="COD">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="SEVEN_DAYS">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="FOURTEEN_DAYS">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="TWENTYONE_DAYS">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="THIRTY_DAYS">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
</restriction>
</simpleType>
<simpleType name="paymentMethodType">
<annotation>
<documentation>
The Payment Method field.
</documentation>
</annotation>
<restriction base="string">
<enumeration value="EFT">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
<enumeration value="CHEQUE">
<annotation>
<documentation>an enumerated value.</documentation>
</annotation>
</enumeration>
</restriction>
</simpleType>
<simpleType name="payBankIdType">
<annotation>
<documentation>
The PayBankId field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="descriptionType">
<annotation>
<documentation>
The Pay Bank Description field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="bankIdType">
<annotation>
<documentation>
The BankId field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="branchIdType">
<annotation>
<documentation>
The BranchId field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<simpleType name="bankAccountType">
<annotation>
<documentation>
The BankAccount field.
</documentation>
</annotation>
<restriction base="string"></restriction>
</simpleType>
<!-- ***************************************************************** -->
<complexType name="payBankDetailsType">
<sequence>
<element name="payBankId" type="tns:payBankIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="description" type="tns:descriptionType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="bankId" type="tns:bankIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="branchId" type="tns:branchIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="bankAccount" type="tns:bankAccountType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="effectiveDate" type="tns:effectiveDateType" maxOccurs="1" minOccurs="0" nillable="true"></element>
</sequence>
</complexType>
<complexType name="paymentDetailsType">
<sequence>
<element name="paymentTerms" type="tns:paymentTermsType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="paymentMethod" type="tns:paymentMethodType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="dispatchMethod" type="tns:dispatchMethodType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="payGroup" type="tns:payGroupType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="currency" type="tns:currencyType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="payHold" type="tns:payHoldType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="freightTerms" type="tns:freightTermsType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="payHandling" type="tns:payHandlingType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="delayDays" type="tns:delayDaysType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="payFromBank" type="tns:payFromBankType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="paymentInstructions" type="tns:paymentInstructionsType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="bankDetails" type="tns:payBankDetailsType" maxOccurs="1" minOccurs="1"></element>
</sequence>
</complexType>
<complexType name="contactDetailsType">
<sequence>
<element name="contactId" type="tns:contactIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="effectiveDate" type="tns:effectiveDateType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="name" type="tns:nameType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="contactMethod" type="tns:contactMethodType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="dispatchMethod" type="tns:dispatchMethodType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="status" type="tns:statusType" maxOccurs="1" minOccurs="1"></element>
</sequence>
</complexType>
<complexType name="arrayOfContactDetails">
<sequence>
<element name="contact" type="tns:contactDetailsType" maxOccurs="unbounded" minOccurs="0"></element>
</sequence>
</complexType>
<complexType name="addressDetailsType">
<sequence>
<element name="addressId" type="tns:addressIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="effectiveDate" type="tns:effectiveDateType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="name" type="tns:nameType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="address" type="tns:addressType" maxOccurs="1" minOccurs="1"></element>
<element name="postcode" type="tns:postcodeType" maxOccurs="1" minOccurs="1"></element>
<element name="city" type="tns:cityType" maxOccurs="1" minOccurs="1"></element>
<element name="state" type="tns:stateType" maxOccurs="1" minOccurs="1"></element>
<element name="country" type="tns:countryType" maxOccurs="1" minOccurs="1"></element>
<element name="contacts" type="tns:arrayOfContactDetails" maxOccurs="1" minOccurs="0"></element>
</sequence>
</complexType>
<complexType name="arrayOfAddressDetails">
<sequence>
<element name="address" type="tns:addressDetailsType" maxOccurs="unbounded" minOccurs="0"></element>
</sequence>
</complexType>
<complexType name="locationDetailsType">
<sequence>
<element name="locationId" type="tns:locationIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="effectiveDate" type="tns:effectiveDateType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="orderingVendorId" type="tns:vendorIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="invoicingVendorId" type="tns:vendorIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="remittingVendorId" type="tns:vendorIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="returningVendorId" type="tns:vendorIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="status" type="tns:statusType" maxOccurs="1" minOccurs="1"></element>
<element name="paymentDetails" type="tns:paymentDetailsType" maxOccurs="1" minOccurs="1"></element>
<element name="addresses" type="tns:arrayOfAddressDetails" maxOccurs="1" minOccurs="0"></element>
</sequence>
</complexType>
<complexType name="arrayOfLocationDetails">
<sequence>
<element name="location" type="tns:locationDetailsType" maxOccurs="unbounded" minOccurs="0"></element>
</sequence>
</complexType>
<!-- ***************************************************************** -->
<element name="Vendor">
<complexType mixed="true">
<annotation>
<documentation>
The Vendor request object.
</documentation>
</annotation>
<sequence>
<element name="vendorId" type="tns:vendorIdType" maxOccurs="1" minOccurs="1"></element>
<element name="name" type="tns:nameType" maxOccurs="1" minOccurs="1"></element>
<element name="persistence" type="tns:persistenceType" maxOccurs="1" minOccurs="1" default="true"></element>
<element name="owner" type="tns:ownerType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="sourceReference" type="tns:sourceReferenceType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="corporateVendorId" type="tns:vendorIdType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="abn" type="tns:abnType" maxOccurs="1" minOccurs="0" nillable="true"></element>
<element name="country" type="tns:countryType" maxOccurs="1" minOccurs="1" default="AUS"></element>
<element name="gstRegistered" type="tns:gstRegisteredType" maxOccurs="1" minOccurs="0" nillable="true" default="true"></element>
<element name="withHolding" type="tns:withHoldingType" maxOccurs="1" minOccurs="0" nillable="true" default="false"></element>
<element name="status" type="tns:statusType" maxOccurs="1" minOccurs="1" default="ACTIVE"></element>
<element name="vendorClass" type="tns:vendorClassType" maxOccurs="1" minOccurs="1"></element>
<element name="locations" type="tns:arrayOfLocationDetails" maxOccurs="1" minOccurs="0"></element>
</sequence>
</complexType>
</element>
<element name="RequestId">
<complexType mixed="true">
<annotation>
<documentation>The typical response object for requests.
</documentation>
</annotation>
<sequence>
<element name="correlationId" type="tns:correlationIdType" maxOccurs="1" minOccurs="1"></element>
<element name="estTimeInterval" type="tns:estTimeIntervalType" maxOccurs="1" minOccurs="0" nillable="true" default="24"></element>
</sequence>
</complexType>
</element>
</schema>
</BLOCKQUOTE>Hi Paul
I believe there is some issue with the TestClient.
Instead to test, can you please try this?
1) Right click on Payment.java and choose Webservices -> generate wsdl
2) Right click on the wsdl and choose Webservices -> Test with WebServices Explorer.
3) Click on setVendor method
4) Enter the request parameters
Sample one:
<ns:Vendor xmlns="http://www.openuri.org/" xmlns:ns="http://suncorp.com.au/services/payment/schema/0">
<vendorId xmlns="">Vendor Id</vendorId>
<name xmlns="">My correlation Id</name>
<persistence xmlns="">false</persistence>
<country xmlns="">USA</country>
<status xmlns="">ACTIVE</status>
<vendorClass xmlns="">VendorClass</vendorClass>
</ns:Vendor>
5) Hit the button 'Go'. The entire soap response will be displayed in the bottom.
I have tested this and it works fine.
Output I got:
<m:setupVendorResponse xmlns:m="http://suncorp.com.au/services/payment/wsdl/0">
<RequestId xmlns="http://suncorp.com.au/services/payment/schema/0">
<correlationId>CorrelationId-My correlation Id</correlationId>
</RequestId>
</m:setupVendorResponse>
Thanks,
Vimala -
Is it possible to simulate whole java card application on simulator?
Hello all,
currently i dont have any real java card yet,not either reader . I already made a simple applet and check its working by CJCRE (net beans simulator), it is working fine,
now i want to move to host application which will communicate with java card via card reader. Is this possible to simulate complete application ( host application + java card applets)?
I want to check it out that:- which line of java program would be helpful to know that:-
1-"how real host application will talk to reader"
2- how it connect and disconnect the reader
3- how it send apdu to java card by reader
and much more.
I am using netbeans 7.1 and it is using CJCRE as a simulator....you mean to say this
http://askra.de/software/jcdocs/app-notes-2.2.2/apduio.html
I am quite confused now, i read this but still can not imagine the concept ,
an applet code is :-
public class GetName extends Applet
final static byte CLASS = (byte) 0x80; // Class of the APDU commands
final static byte INS_READ = (byte) 0x02; // instruction for the READ APDU command
final static byte INS_WRITE = (byte) 0x03; // instruction for the READ APDU command
final static byte INS_DY_CO = (byte) 0x04; // instruction for the READ APDU command
final static byte[] text = {(byte) 'A', (byte) 'M', (byte) 'I', (byte) 'T'};
public static byte[] holder;
public static void install(byte[] bArray, short bOffset, byte bLength)
new GetName();
protected GetName()
holder = new byte[5];// allocation of memory in runtime
register();
public void process(APDU apdu)
if(selectingApplet())
return;
byte[] cmd_apdu = apdu.getBuffer();
if (cmd_apdu[ISO7816.OFFSET_CLA] == CLASS)
switch(cmd_apdu[ISO7816.OFFSET_INS])
case INS_READ:
if ((cmd_apdu[ISO7816.OFFSET_P1] != 0) || (cmd_apdu[ISO7816.OFFSET_P2] != 0))
ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
short le = (short)(cmd_apdu[ISO7816.OFFSET_LC] & 0x00FF);
short len_text = (short)text.length;
if (le != len_text)
ISOException.throwIt((short)(ISO7816.SW_CORRECT_LENGTH_00 + len_text));
apdu.setOutgoing();
apdu.setOutgoingLength((short)len_text);
apdu.sendBytesLong(text, (short)0, (short)len_text);
break;
// here we save data from apdu and will keep inside the data byte
case INS_WRITE:
short lc = (short)(cmd_apdu[ISO7816.OFFSET_LC] & 0x00FF);
Util.arrayCopy(cmd_apdu, (short) ((ISO7816.OFFSET_CDATA) & 0xff), holder, (short) 0, lc);
short len_holder_inside_write= (short) holder.length;
apdu.setOutgoing();
apdu.setOutgoingLength((short)len_holder_inside_write);
apdu.sendBytesLong(holder, (short) 0, (short) len_holder_inside_write);
break;
case INS_DY_CO:
short len_holder= (short) holder.length;
apdu.setOutgoing();
apdu.setOutgoingLength((short)len_holder);
apdu.sendBytesLong(holder, (short) 0, (short) len_holder);
break;
default :
ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
else
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
}now i think i need to make a another java file which would contain a main class, Is this both file would be inside a single java card project. and how these both would be connect to each other.
for manually run a applet- there were two steps 1-
C:\java_card_kit-2_2\samples\src\demo>jcwde jcwde-getname.app
Java Card 2.2 Workstation Development Environment (version 0.18).
Copyright 2002 Sun Microsystems, Inc. All rights reserved.
jcwde is listening for T=0 Apdu's on TCP/IP port 9,025.
and in second terminal we wrote-
C:\java_card_kit-2_2\samples\src\demo>apdutool -nobanner -noatr getname.scr > ge
tname.scr.jcwde.out
Here it is clear that, if i will use javacardio then no need to pass the apdu from a file .....but i am confuse about how it possible, ie. is both file lie in same project , because i m using simulator so i need to run these both file simoltaneously........give me some roughly steps to implement this.
Maybe you are looking for
-
Pavilion dm4 failure "The recovery attempt has failed"
Laptop gave me the following Message: The recovery attempt has failed. Select one of the following buttons. Save Log Details Retry. Saved the Log and Retry (two times) with same issue:This is the Log,Please Help P2PP BurnBoot Check Failed Possibl
-
IPhone 3G with Parrot CK3000 Evolution
I ordered a Parrot CK3000 for my Saab the other day. It should be here Monday so I can install it. I have read though that I cannot sync my iPhone's contacts to it to be able to use the voice dialing and stuff. It's not the end of the world, I don't
-
CRM 7.0 WEB IC - context node values are not seen in webIC
Hi can anyone help me in resolving my problem in CRM WEB IC. Actually i have added a new context node Using wizard , by right clicking the context nodes. i have four custom fields in that node, these i have to show on the View Account overview and th
-
How do I import photos stored in iPhoto on my iPad to my computer?
I used the iPad camera connector to import photos from my SD card to iPhoto on the iPad. How do I get those photos and videos onto my Win 7 PC? Would be good if I can delete all my imported photos and videos too. iTunes have been installed.
-
Hi all, just a quick note for anyone that's interested... SMS.ac are offering $100 for flash content from developers new to their system. I've spoken to them directly, and whilst their 'mobile pods' aren't currently supported on mobiles, flash lite c