TestStand override report options for one sub-sequence

I have a TestStand sequence that calls 17 sub-sequences. I have the Report Options "Result Filtering Expression" set to "Exclude Passed/Done/Skipped". I am using TXT reports.
I want to override the Results Filtering report option for one of my sub-sequences (Voltage Test). I have included the ReportOptions Callback in the Voltage Test sub-sequence. The callback contains a statement that sets "Parameters.ReportOptions.ResultFilterExpression = "True"". The sub-sequence test results are still not appearing in the Report. I see no place in the TestStand documentation where the arguments for the "Parameters.ReportOptions.ResultFilterExpression" are listed. What am I doing wrong?

Hi
I have changed the attached sequencefile for the following in the ReportOptions
Parameters.ReportOptions.ResultFilterExpression = "Result.Status != \"Passed\" && Result.Status != \"Done\" && Result.Status != \"Skipped\""
One tip,
to get the correct syntax for the ReportOptions, place a break point in the ReportOptions. Before executing the Sequence File, setup the required parameter in the Configure | Report Options. Run the Single Pass, when it stops at the break point, you can then copy the contents of the required parameter.
Regards
Ray Farmer
Message Edited by Ray Farmer on 10-12-2006 09:24 PM
Regards
Ray Farmer
Attachments:
Affirm Clock Distribution Tests.seq ‏70 KB

Similar Messages

How to hide/show main report footer for a sub report ?

Need to hide main report footer for a sub report(having more than one page and need to hide footer for all those pages).And again make it visible for another sub report which also have more than one page (and do the same to all of its pages)
I have tried with formula
WhilePrintingRecords;
Shared BooleanVar SuppressFooter := True;
WhilePrintingRecords;
Shared BooleanVar SuppressFooter := False;
with this formula main report footer is shown only on last page of sub report where i need it in all pages.
Any solution??

Hi Jinu,
1) Do some or all of those subreports span multiple pages?
2) Do each of the Subreports start on a new page?
If yes, for both, then here's what you need to do:
1) Create a formula (@True) with this code:
shared booleanvar SetStatus:= True
2) Create another formula (@False) with this code:
shared booleanvar SetStatus:= False
Drag and drop the @True formula on the details sections for which you want the Page Footer to be suppressed.
Similarly, drop the @False formula on the details sections for which you want the Page Footer to show up.
Then, go to the Section Expert > Select Page Footer c > Click the formula button beside Suppress and use this code:
shared booleanvar SetStatus;
-Abhilash

Re: Best options for exporting a sequence and making a DVD

I using iPad 2.

"Re: Best options for exporting a sequence and making a DVD" and "I'm using iPad 2" and "My phone number is not verified!" don't seem to be entirely related. Can you please restate your question?

Where do I go to pick 3 security questions? I can only find the option for one.

I really want to redeem my code for my free movie, but it wants me to pick three security questions. When I manage my id it only gives me the option for one. Please help.

Usually you will need to contact iTunes store support but this workaround may help:
-On the device/computer that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
- Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
- Sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit/debit card and NOT the security questions.
- At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.

Load Options for Edit Sub Step

Hi Ppl,
I have created a custom step type which has a edit sub step with LabVIEW adapter. When invoke the edit sub step for the first time, it takes a while to load the edit sub step and there is a noticebale delay for the first time. I want the edit sub step module to be loaded when TestStand is open or when the sequence file is open. I was not able to locate any location where we can specify the load and unload options of the edit sub step. Is there any way to do this ?
Thanks,
Sathish

This is probably because of the launching of LabVIEW development system.
Have you tried setting the Load option for the SequenceFile to 'Preload when opening sequence file'
Regards
Ray Farmer

Error is report generation for one employee

Dear SAP Experts,
Please provide immediate solution to this issue.
Blood Group details of one Employee is reflecting multiple times while generating report but only one record is maintained in master data.
What could be the possible reason for this error ?
please give some solution ASAP
Regards,
TD

Please, stop using words "immediate" and "ASAP" that is just rude behaviour.
You did not provide the information - which report are you running? What do you mean by 1 record in master data? Does that mean there is only one record in PA0028? If you look technically at the structure of the infotype, you will see that there can be multiply (in fact exactly 30) values / combinations maintained for one single record in the infotype.

Report 11gR1: multiple standalone Reports Server for one domain

Hi all,
In Oracle Froms, Report (11.1.1.6.0) environment is necessary to create more than one standalon Reports Server (iAS instances).
1- How can we create multiple Reports Server (insatances) in same domain?
2- How can use pro Reportsserver multiple engines (e.g. more than 3 engines)?
Regards,
Moh

Hi Moh,
Out of the box in 11g you get 1 standalone reports server (you can see this one via opmnctl status) and 1 in-process reports server than runs inside WLS_REPORTS managed server.
You can create more standalone reports servers for your instance. Please follow the following support note
Reference
How Do You Create And Start Up A Standalone Reports Server In 11g R1 & R2? (Doc ID 961174.1)
Regarding how to increase reports engines for each of your reports server you need to go to the Enterprise Manager console and select each of the reports servers you have and go to Reports --> Administration --> Basic menu and
change " Maximum Engines" property for the value you need. You will need to re-start your Reports server after this.
Hope this helps, Roberto

How to make select-option for one inner table

Hi,
Who can teach me to make select-option for a inner table, which let select-option display data from this inner table.
Thanks in advance.

Is this what you are looking for?
report zrich_0002.
data: begin of itab occurs 0,
      matnr type mara-matnr,
      spras type makt-spras,
      maktx type makt-maktx,
      end of itab.
select-options: s_matnr for itab-matnr.
select-options: s_spras for itab-spras.
start-of-selection.
select mara~matnr makt~spras makt~maktx
           into corresponding fields of table itab
                  from mara
                        inner join makt
                           on mara~matnr = makt~matnr
                                    where mara~matnr in s_matnr
                                      and makt~spras in s_spras.
check sy-subrc = 0.
Regards,
Rich Heilman

Finder View Options, For All Sub Folders

If I understand how View Options work in Finder windows ...
I can set View Options for a particular folder to always open up in a particular View Options setting.
I can set that very same View Option as the Default View Option for all the rest of the folders I open up.
But, what I would like to do is set the View Options for a folder and all it's sub folders to be the same. Without changing the default View Option for the rest of the folder I open up.
For example.
I like to have my Documents open up in List View.
I like to have my Photos open up in Icon View. (along with certain Icon View Option settings)
Is there a way to do this?
Can I set the directory and all sub folders/directories for all my photos to open up the way I would like them? Without having to change the way all my Document folders/directories open up?
Because the way it seems to work now, is that every time I create a new folder in my Photos directory/folder, I have to manually set the View Options, since the default is List View and not Icon view. If I change the default to Icon View, then any new folder/directory in my Documents will then open up in Icon View.

If the folder is not set to open in a specific view, it should open in the same view as the containing folder. When using mixed views, you need to open the folder in another window to get the view it previously had.
In your example, setting Documents to always open in list view and Photos to always open in Icon view should have any new sub folders open in the same view. If any existing sub folders have a different view, you will need to manually change the view, since the Finder will (usually) keep track of the view any particular folder has.

Reporting options for Appropriation Request

Hi Folkes,
Can you please let me know about how we can have a summary of approvals that are in the Appropriation Request ot any view of approvals.
Or do we have any Reporting option to view the summary of approvals in the Appropriation Request.
Thanks,
Jeevan.
Edited by: Jeevan Dondapati on Mar 5, 2008 11:02 AM

Hi Srinivas,
I have some Questions regarding the above issue...
1. Transaction IMR4 appears to show only the current status of an appropriation request. Is it possible to see the sign off history of the appropriation request within that (or the other IMR) transaction?
2. Whether the 3 tables that you have specified can be queried for the sign off details?
IMAK (Appr. Request)
JEST (IQ* - Status)
TJ02T (Text for Status)
3. How do the IMR* transactions relate to the information contained in the IMA11 and IMA12 transactions?
Please provide me the answers.
Thanks,
Jeevan.

How to disable drill option for one column in the WebI Report

Hi,
How to disable drill option in a column in WebI?
When the Drill option is enabled by default all the column in the report will have that enabled,
I ahve added Hierarchy in the Custom hierarhcy list in Universe.
I am using BOXI3.1 WebI Reports.
But I wanted only the hierarchy column to have that drill option enabled, rest all column should display text data.
PLease let me know if you have any idea.
Thanks in advance.
Regards

Cretae the variable at the report level (may be with the same definiton) and then use that variable in the table
to disable the drill. It will be displayed as normal text object.
Drill functionality is enabled only on the objetcs coming from the universe.
Regards,
Rohit
Edited by: rohit12 on Mar 11, 2010 10:12 AM

Report visible for one user but not for other user

Hi all,
We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
I need quick responses.
Thanks in advance,
Sananda

Hi Sananda,
Just assign the saem roles as the other user who can view ..
You can inform the Auth/basis team and they shud be able to do this..
The T Code is RSECADMIN>user Tab>Assignment>user.Display and BView the roles here..
or goto SU01 and check for the Roles Tab.....
The New user must have the same roles as that of the other..
Rgds
SVU123
Edited by: svu123 on Sep 22, 2010 7:14 AM

Best options for exporting a sequence and making a DVD

Hello,
I have a sequence that is 79 minutes long with the following properties:
Vid Rate - 29.97 fps
Frame Size - 1440 x 1080
Compressor - Apple Int. Codec
Pixel Aspect - HD (1440x1080)
This project began with the intention of being a short video, which is my background, and I can usually deal with exporting issues for short videos. However, it is no longer a small project. This was unexpected, and I frequently find myself in over my head. I am at the point where I need to give small theaters copies to view for consideration for a real screening, and would like to ask the folks here some questions:
How would you export this sequence for viewing on a DVD? Export through QuickTime Movie (not conversion)? Wouldn't that make a file too large to create a DVD with iDVD? DVD is only SD, yes? How is that (watching on a DVD) taken care of, if at a later time I would want a DVD of this sequence to be in the best quality possible?
This is a lot of questions, and I hope not too vague. Thank you for your time, and thanks in advance for any help.

Hi
My notes on this
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R (plays on more even older DVD-players)
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
If problems:
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Problem with F4 option for one field

Hi,
While creating pricing condition records (VK11), one field is not having F4 option. That field is KGKG1 (Condition group1).
Ihave created one table with s.org, dist.channel and condition group1 (KDKG1).
While creating onle this problem. While changing and displaying the F4 option (i am able to select the values from list) available.
What would be the reason. Is it require to change in table like domain, fields.
Please help me to solveit out.
Regards
Lakshmikanth

Hi,
you can create new condition groups here.
IMG>Logistics - General>Business Partner>Customers>Control>Define Condition Groups.
Goto Customer master maintain condition groups.
XD01/02. goto general data , In Menu select Extras and choose additional data. maintain condition group for customer.
Regards,
Chandra

Override Security Profile for one employee

Hi
I have one employee who works in 'Accounts Department' and the HR user of accounts department can see only the employees of Accounts Department based on the security profile. This is working fine. But theres a different requirement. Some employees are transferred to other departments for 3-6 months for different purposes. During this time also the HR user of accounts department needs to view this employees details due to HR policies and procedures. Can we achieve this? If yes, how?
- Gulzar

Q 1 - When Employee is transferred from Dept 1 to Dept 2 for 6 months, Should the HR for both Dept 1 and Dept 2 be able to see his details for 6 months?
Q 2 - After 6 months period, employee's organization is again updated to Dept 1, should again HRs of both Dept 1 and Dept 2 be able to see his details even after the 6 months period?
Q 3 - If answer for Q 2 is - "after 6 months period, only HR of Dept 1 should see his details" , how to identify Employee's home department? Will it be the Employee's Organization effective as of Employee's hire date?

TestStand override report options for one sub-sequence

Similar Messages

Maybe you are looking for