Teststand project transfered to different machine (same specs) and the Initiate fails

Hi all,
I am working on a bench setup with different intruments controlled by GPIB (HP E3631 power supply, Keithley 2400 etc). We are using teststand, which calls the dll generated from Labwindows/CVI environment. Our project is recently transferred to a different machine and now the communication (initiate command) fails with the HP E3631 and rest everything is working fine. I also tried running NI spy and I see nothing when I execute the instructions seperately for HP E3631.
Can someone please help me to narrow down where the possible problem can be ( everything remains the same from the old machine to new machine). ?
Regards,
Nivesh

The driver that is used on both the machines is exactly the same copy. As i told earlier a Labwindows/CVI generated dll is called from the Teststand program. The only difference is that the machine_1 (working with E3631) have the Labwindows/CVI version 5.5 installed and the other machine has version 5.0. I am also attaching the generated Spy logs for both the machines:
1) Machine 1 has instructions for both the Kiethley and E3631 in the spy file.
2) Machine 2 has instructions only for the Keithley and it fails when it reaches the initiate instruction for E3631.
Error code > (-1074135040 : User defined)
Thanks in advance.
Attachments:
Capture_machine1.spy ‏22 KB
Capture_machine2.spy ‏16 KB

Similar Messages

When I copy a TestStand project to a different computer, why would all the paths/links break?

Two duplicate (copied) TestStand sequences have the same absolute path on two computers, but the sequence on one computer cannot see any of the LabVIEW VIs nor sub-sequences.
What might cause this?

Do they have the same Search Directories? Go to Configure>>Search Directories and make sure they match. Also the VIs/dependancies have to reside on that PC in the same spots as well.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Screen saver won't start since Lion upgrade. Two different machines, same issue.

Screen saver won't start since Lion upgrade. Two different machines, same issue. Help

For anyone following this thread, I've found a solution to my problem. Turns out that a cute widget called FishTank appears to be the culprit. With it running in Dashboard (even when I don't see Dashboard) the Screensaver and Sleep functions don't work. I turned it off, not because I'm clever, just because I tired of it, and voilà, Screensaver and Sleep are now working. It can stay in my widgets list without any problem, it just can't be turned on. I'm going to delete it anyway, however.
Hope this points the way to solutions for some of the rest of you!
Cheers!
Keith

I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation

I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation of 12, which I am removing. How do I correctly unstall the old Elements 12, and install the new elements 12 from disk, and retain all albums and libraries from the old Elements 12?

You're welcome. It was not an answer, it was a question, and it could lead to being helpful if you explain why you think you need to uninstall.
As far as uninstalling goes, you will uninstall it like you do for any program, which depends on what kind of operating system you have. If you wish to retain albums and whatnot, maybe the following link can provide some guidance.
Photoshop Elements Help / Use Backup, Restore to move catalog | Organizer | Elements 6 or later
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html#ma in_Special_notes_if_you_restore_a_catalog_from_a_previous_version_of_Photoshop_Elements

Error: Check that sender and reciever has same contract and the same bindin

Hi,
I created a client proxy for a dot net web service. Configured logical port in soamanager tcode. Then tested the client proxy using the report program. It gives an error response like this:
- <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
- <s:Body>
- <s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/ws/2005/05/addressing/none">a:ActionNotSupported</faultcode>
<faultstring xml:lang="en-US">The message with Action 'http://tempuri.org/GetData' cannot be processed at the receiver,
due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched
Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender
and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport,
None).</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
I recorded the request/response in SICF tcode. I took the request that is recorded there in SOAP UI tester, I get the correct response there. Only when i run the client proxy from SAP it gives the above error.
it would be great if any one has solved this before.
thanks in advance.
Regards,
Suresh.

Hi Selva,
Depending the ECC version you're on & the SP level, SAP note 1229690 resolves this problem.
Regards, Trevor

Must have the same type and the same length

hi experts,
DELIVERY_PLANT data type STRING    //from proxy class, can't be changed
      BEGIN OF ty_citem,
          article type matnr,
          werks   type werks,
       END OF ty_citem,
LOOP AT it_items INTO lv_item.
    lv_citem-article = lv_item-article.
    lv_citem-werks = lv_item-DELIVERY_PLANT.
    APPEND lv_citem TO GT_citem.
    clear lv_citem.
ENDLOOP.
SELECT matnr werks
       from marc
       into table GT_marc
       for all entries in GT_citem
       where matnr = GT_citem-article and werks = GT_citem-werks.
error message here:When you use the addition "FOR ALL ENTRIES IN itab", the fields "WERKS"
and "GIT_CITEM-WERKS" must have the same type and the same length.

Hi,
You know for statement FOR ALL ENTRIES in where clause data type and length should be match.
As per my understanding ,here GT_citem-werks is a string. But you know data type of WERKS_D is char with lencth 4.
Use the below select statement.
SELECT matnr werks
       from marc
       into table GT_marc
       for all entries in GT_citem
       where matnr = GT_citem-article and werks = GT_citem-werks+0(4).
Thanks.
Subhankar

I just opened an "old" project in a newer version of iPhoto and the pages in the book doubled in number with the seam in the middle of each page. Suggestions?

I just opened an "old" project in a newer version of iPhoto and the pages in the book doubled in number with the seam in the middle of each page. Suggestions?

Start with Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
If that doesn't help continue with:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database.
Happy New Year

Beeping noises of the same pitch and the screen remains black

My laptop is making consistent beeping noises of the same pitch and the screen remains black, what can I do to fix it?

See these related kb articles:
Power On Self-Test Beep Definition - Part 2
Intel-based Mac Power On Self Test RAM error beeps

HT3275 Using time machine first time and the estimated time says 25 days. Wow! Am I able to use my Mac when Machine is doing its first backup?

Using time machine first time and the estimated backup time says 25 days. Wow!
Am I able to use my MacBook Pro when Machine is doing its first backup?
I can't be without my computer that long. I would have withdrawal symptoms (very painful).

Something WAS radically wrong, but I don't know what it was. However, using Apple's disk utility, I decided to totally erase the Seagate, which was "pre-formatted" for Mac and PC.
I first saved the Seagate software to my hard drive just in case I needed it later (which I don't),
By the way, the first time I tried Time Machine it stalled after about 3 GB. The second time I got the message saying 25 days backup time. I stopped that backup after receiving your response.
After reformatting (extended - journaled) I made my third attempt. Success!!! It took about 8 hours, but went through without a hitch..
I bought the SeagateI because a momentary power failure messed up my 1 TB LaCie external, which was divided into 2 partitions. The power glitch completely fouled one partiton and it will not reformat no matter what I try. I did not do a full reformat because I did not want to lose the backup on the good partition. Now that I have a good backup I plan to do a full 1 TB reformat (without partitions) on the LaCie.
Thank you for your response, which really did help me.

How do I edit FCE 4 project on 2 different machines?

I am working on some family videos and started editing on one machine (laptop) and want to continue editing on a desktop at home. I know I need to copy the Project file, but what other files to continue editing on the other machine?
I googled this and found I need to get the capture scratch, render files, and the audio render files.
Q: is there a simple way to do a "save as" to copy all required files to allow "portable editing" and sync'ing with the new mac - there must be an easier way to do this... Thank you in advance!

Hi
A. The only way to share a project requires some organization and a lot of discipline.
• Same version of FCE on both Macs
• an external hard disk to move project on. FireWire and has to be Mac OS Extended formatted
• alt is to use the LapTop as an external drive on the stationary Mac
(this is the best alternative - though You can reconnect all media - as it's
already captured)
B. To do a joint project - One has to do right from the very beginning.
• On the external hard disk - Create a new folder - Name it appropriate to project
• Then Start up FCE - AND DIRECTLY - Set/address all scratch disks to this new folder
• THEN - SAVE and direct this document to this new folder TOO !
This collects all vital parts in one place.
• Now Capture edit etc.
C. Automation that assembles projects - NO There is no such tool in FinalCut Express
BUT - This do exist is FinalCut Pro - Very good tool that would be good to have in FCE
So - I would start laptop in target-mode (Start it and keep T down) then connect
this as an external hard disk.
This would be easiest way. But still - to what use.
Alt 2 - Start all over and make this collecting folder - and keep everything in it
eg audio (.aiff) and photos.
Yours Bengt W

How can I align two different text row in the same table in two different way (one centered and the other one on the left)?

Hi,
I want to center two different text row that are in the same table but one on the center and the other one on the left. I put a <span> tag hoping that it has been overwhelmed the table's class properties The .bottomsel's font-family and the .Cig84's font-family and colour work but the text-align don't: they're both on the left.
These are my source and CSS codes:
Source:
<table width="600" border="0">
<tr>
    <td class="bottomref"><p><span class="bottomsel">| <a href="index.html" target="_self">Main</a> | <a href="about.html" target="_self">About</a> | <a href="clients.html" target="_self">Clients</a> | <a href="contact.html" target="_self">Contact</a> |</span><br />
      <span class="credits">Credits: <span class="Cig84">Cig84</span></span></p></td>
</tr>
</table>
CSS:
.bottomsel {
text-align: center;
font-family: Georgia, "Times New Roman", Times, serif;
.credits {
text-align: left;
.Cig84 {
color: #F00;
font-family: "Comic Sans MS", cursive;

Use paragraph tags with CSS classes.
CSS:
     .center {text-align:center}
     .left {text-align:left}
HTML:
<table width="600" border="0">
<tr>
    <td class="bottomref">
          <p class="center">This text is center aligned</p>
          <p class="left">This text is left aligned</p>
    </td>
</tr>
</table>
Nancy O.

SMP3 - AppDevelopment (Mobiliser): Different Machine Between SMP3 and Mobiliser

Hi, Expert I have a question on SMP3 and AppDevelopment (Mobiliser):
Let me explanation an issue,
I Have a mobiliser 5.1 banking system and it running normally on server, and a few month later i want to use mobile application with (SMP3, Cordova with Kapsel and SAPGUI) for use my existing mobiliser system, heBut i find difficult when they want to access te services (SOAP) provided by the mobiliser system.
for information, which i have done for that:
install smp3.0 sp01
configure Eclipse IDE with SAPGUI plugin and integration gateway plugin
create odata service from jdbc -> successfully to access odata service provided from mobile application
create odata service from SOAP -> successfully to access odata service provided from mobile applicationn
But when i tried create Odata from mobiliser service, it failed with message " Could not send Message", i think this happens because the mobiliser service requires authentication. the following my question:
how to create Odata Service from SOAP service with authentication
if point 1 not possible, anyone have another solution for integrate service between SMP3 and Mobiliser (running on difference machine)
difference function the SAP mobile solution (Agentry, Integration gateway(SMP3), Appbuilder, Kapsel, SAPGUI, Afaria, Fiori)
Many thanks for explanation, and if possible can guide me with some example.
Basuki

The Mobiliser server components have been integrated into SMP3.0 and are actually the same components that are used for the standalone Mobiliser 5.1 SP03 release (also referred to as 5.1.3). The difference is in the packaging.
Documentation for the Mobiliser 5.1.3 can be found here : http://sybooks.sybase.com/sybooks/sybooks.xhtml?id=100066&c=firsttab&a=0&p=categories
Now for the less obvious part …
The Mobiliser sample/reference mobile apps (aka Smartphone Mobiliser) and the build scripts required to build for iOS, Android, Blackberry and Mobile Web are part of the Mobiliser 5.1 SP03 release only. The apps didn't make it into the mobile platform, except for the build output of Mobile Web. With the build scripts mentioned, we did create a Mobile Web version that is included in the SMP3.0 server. This is a separate bundle that needs to be activated via the admin cockpit.
If you want to leverage the Smartphone Mobiliser product, you will have to use Mobiliser 5.1.3. Not sure how this works out from a sales/customer point of view. Let me know if you have issues with this.
Technically, the web services used by Smartphone Mobiliser to interface with the server are identical for SMP3.0 and Mobiliser 5.1.3. So Smartphone Mobiliser apps can work with both SMP3.0 and Mobiliser standalone. Mobiliser apps will directly interface with the smartphone web services.
Hope this helps.
Regards,
Ludo Noens

Different results between DD03L and the same structure in transaction SE11

Hi Experts,
I created a 'Z' structure and when I see this structure using trx se11 are displayed 10 fields but when I see this same structure through the table DD03L are displayed 15 fields.
I created again 2 of 5 fields that were missing and the register was duplicated for that field in the table DD03L .
Someone already see anything like this??
Best regards and thanks in advance.
Caíque Escaler

hi check this...
dd03l is for the tables and i didnt think for the structures..and give the structure name in the DATA TYPE it will show the structure you had created ..see the header text for the dd03l and u will get what it is exactly
se11->data type zstructure->f7(display)..
regards,
venkat

Our iPad air keep kicking out of the Apple TV. None of the other iPads we have on the same network and the same content do this. The program kicks off the AppleTV and starts playing on the iPad about every 10 minute

We have used the 2 Apple TVs and the 5 different IPads successfully on both Apple TVs. But the iPad air, on the same content, on the same network, on the same Apple TV drops off the Apple TV and the content starts playing on the iPad. When we choose Apple TV on the AirPlay button, it starts playing on the TV again. It does this about 6-7 times an hour. We have the latest software update. We have also deleted and reinstalled the App to play the context (iView) and it still does this.

Hey there TandViv,
It sounds like your other iPads work correctly when Airplaying to your Apple TV, but one disconnects about ever 10 mintues or so. I have a few thoughts for this issue you are seeing. First, try closing all the apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test it again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists try resetting the network settings on the phone and see how that works:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
All the best,
Sterling

I have a project in Final cut pro 10.5 and the spinning icon appears with every action and each action takes up to 30 seconds to respond to?

I have a project in Final cut pro 10.5 and every action takes up to 30 seconds for the program to respond . The spinning icon stays up during this time?

Are you using Mavericks. If so you should update FCPX

Teststand project transfered to different machine (same specs) and the Initiate fails

Similar Messages

Maybe you are looking for