Text elements transport

i have a report in one for which there are text elements. now i have to transport these text elements to another system, please give me the procedure to transport these. (pls note i cannot change abd save these text elements in the present system, by which i can assign a req number)
pls make it soon...

satish,
Go to the your standrd txt(so10) in the sytem which you have developed(1st system). Make some corrections.
go to se10 -> create a Workbench request..note down the TP number.
Then Exe the program RSTXTRAN (SE38) , there you give ...
Name of Correction : your TP number
Text key - object : TEXT
Text key - name : your Standard txt name (which you hav created in so10).
Text key - ID : ST
Text key - language : EN
If you excute this, your std text will be packed up with your TP no.
Thn goto SE10 -> release your TP. -> move it to subsquent systems...
Rgds,
Jothi.P
**<u>Do award by clickg the options on the left..(if helpful)</u>

Similar Messages

  • Transporting Text Elements and Text Symbols?

    Hi,
    Please tell me how do we translate text symbols and text elemnts into different languages? Also how do we transport them and if we translate them in different languages then will these translations be available when we are transporting them to different servers?
    Looking forward to your quick response.
    Regards,
    MD

    Hi,
    Refer the below thread..
    Re: Text element translation
    Re: Text element transporting
    Edited by: Chithra Saravanan on Aug 4, 2008 11:33 PM

  • Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

    Hi  All,
    I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
    Regards,
    Sachin
    Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

    Hello ,
               In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
    hope it is clear
    assign points if useful

  • How to transport the text elements in  Reports?

    need answer to this question.
    how to transport the text elements in the reports?
    Edited by: venkata kumar on Feb 18, 2008 1:33 PM

    Hi Venkata,
    Text Elements are a component/part of the SAP script and are not individual ABAP objects within the SAP environment hence they cannot be transported independently.
    You would need to make changes in your text elements in the SAP script which would result in the SAP script being saved under a transport and moving the transport across the landscape would result in the text elements also getting transported.
    In short: Move SAP script - to move text elements.
    Cheers,
    Aditya

  • Error in Assignment of Text Elements of Report to Transport

    Hi All,
    I have transported few reports to Quality system however the texts elements associated with those reports have not transported to Quality system .
    Now I am trying to assign these text elements to new Transport however I am getting error while activation and messgae just displays " Error in Activation "  .
    The Original system of these reports is different from my current development system.  The Transport Layer of Package and Transport is same.
    Please advice . Thanks.

    Hi,
    Try to transport the text-elements along with the report to the quality server. Save and activate the text-elements and the report in the same transport request and then transport to quality system.
    Regards,
    Vik

  • How to transport the  text elements

    hi guru's,
      i need answer to this question.
      how to transport the text elements in the sap script?

    Hi,
    U mean Standard Text?
    Standard Text can create using SO10.
    Use RSTXTRAN Standard Program..
    Do Like this..
    Goto se38 and enter program name as RSTXTRAN
    and press F8..
    and give Text-key Name as Standard Text Name
    then Press F8..
    And select Select check box.. and enter
    and press on trsfr to corr button..
    it asks transfee textxs to a correction..
    press on yes button..
    it will show request number or create your own request...
    and after goto SE10 tcode and Transport it...
    Regards,
    KK

  • Issue in text element in Bex after transport

    Hi All,
    I'm facing an issue in text element assigned to Fiscal year .
    In Bex design mode ,I introduced text element and I choosed the "Display Current fiscal year(Variable/Key)" in Development system and after releasing the design mode Im seeing the year in numbers, say 2010(user entered year).
    Now I transported to Quality system when checking the report Im seeing the year is changed to text format, that is "'Cal. Year, 4 Special Periods 2010" and in design mode > text element property> "Display Current fiscal year(Variable/text)" is checked.
    Could anyone help me why this change happening from one system to another system.
    Thanks in advance
    Rgds
    Jayasri

    Hi Jayasri,
    Restrict your report on fiscal year variant( eg K4).
    Thanks,
    Kalyan.

  • Transport ot text elements translation

    Hi,
    In SE63, I did translate some custom text elements of program SAPMP56T and able to save. But have no idea about how to transport these changes. While saving, I did not receive any prompt for transport request. I am working in SAP 4.6B and checked SE09 to find any transports created , but there was no transport related to translation.
    Would appreciate help to resolve the issue.
    With Regards,
    Ravi

    Hi All,
    Finally I found way to transport text elements translation. Login Source language, here say EN and then from SE38, text elements screen , click on menu Goto -> Translation
    This will take to SE63 screen, you can translate and then click save icon in SE63. Then click on back button to return to SE38 text elements screen. Here again click on SAVE button and that is all. All translation in French also included in this transport. However when you saved text elements in SE38, the message you will get is misleading , it says text elements saved in EN language.
    When I transported this request to QA system, French translation of text elements moved to QA system.
    I think this is problem in older versions of SAP say 4.6b and backwards. In 4.6C onwards, you have Transport recording option in SE63 .
    WIth Regards,
    Ravi

  • Transport Text elements

    Hello ABAP experts,
    I have created a program and also text symbols. I am trying to transport both.
    to transport the program i did
    Menu: goto > object directory entry > selected the package > selected the request.
    in se09 i could see the entry as R3TR PROG and the program name.
    i would like to transport the text element in the same way.
    i browse to menu: goto > text elements > text symobols > object directory entry is greyed out.
    is there a way i can directly add the text elemetns in se09 in the change mode. what would be the program id and object type.
    Suggestions appreciated.
    Thanks,
    BWer

    Hi,
    When you transport the program first time, the object directory is R3TR PROG. This entry includes all the text symbols associated with the program. If you make a change in program, it will create a version with object entry LIMU REPS. If you make a change in text symbols, it will create an object entry with LIMU REPT.
    So first time you dont have to transport text symbols separately.
    Reward if it helps,
    Regards,
    Anil

  • Transporting Translations of Text Elements in SE38

    Hi All,
    A report has been transported to the integration system in which the text elements are maintained in English Language.
    Now, I have to provide the translations to all the text elements in Italy Language. When I maintained the translations (GOTO --> Translations in ABAP editor) for all the text elements, the program has not prompted to save them in a Transport request. Instead all the translations are saved in Development system.
    Could you please help me in assigning these translations to a transport request and release them to Integration system?
    Best Regards,
    Kumar.

    Hi,
    Go to text elements from the go to menu tab, give a space and try to save it again it will prompt to give the package name and transport request. Assing the package and TR.
    Thanks,'
    Sriram Ponna.

  • Issues regarding Transporting the Custom codes and Text Elements

    I created a custom t-code and had some text elements for my ABAP program in DEV, I transported quality an it worked , but when i transport it production it did not transport the custom code and the text elements.  Can u guys give me steps to take for the custom code and the text to be transported sucessfully??

    Hi,
    Please check whether the Tcode and Text elements are assigned to the particular Transport Request number. If it is an enhancement that Tcode and Text elements might be there in QA before itself and so this is working. You need to add the TCode manually while transporting the request and transport it to QA and PRD.
    Thanks and Regards
    Sowmmya VB

  • Issue with printing of multiple text elements in main window

    Hi experts,
    I have developed a sales order form in SAP script.
    I hv got two text elements in the main window. n i m calling these two text elements by using two write form functions in d print program.
    The first text element is gettin called n d relevant fields in dat particular text element is being displyed. (Window - Main)
    My problem is dat the second text element for the same main window is not gettin called n its relevant fields r not gettin displayed.
    Plz help me to solve the querry.
    Its urgent.
    Thanks n Regards,
    Purva

    Hi,
    Are you testing that from in same client where you developed, else make sure that after each change you need to transport the form to testing client.
    second thing is check with code did you mention the same text element in window editor and in the program.
    Reward if useful,
    Thanks,
    Sreeram.

  • Text elements SAPLXM02

    Hy all,
    i'm having a strange issue in trasporting text element in Quality landscape, i have insert an include in the user exit ZXM02U12,
    i have to text that are in SAPLXM02, but i can't include the SAPLXM02 in my CR. I try in all the way i know but there is no way to transport it.
    Any idea to how to transport those texts?
    Thanks

    Hi,
    Select the CR in se10 transaction and click on the "Include objects" button in the tool bar. Now give your required program name and include it in the CR.
    Regards,
    Harish

  • Text elements changed in production

    Dear experts,
       The selection text in text elements are fine in development and quality system but in production it show technichal names what might be the reason it is showing technical names.

    Shilpa,
    It happens some times.Now you just make a small change in the Report Texts in Development,save it in a request and tranport it to Quality and Production.
    You can even  manually tag the report texts to a transport request as below
    Select your request in SE09
    Double click on the request
    Click on CHANGE (Ctrl+F1)
    Click on the OBJECTS TAB
    In the table Control that you are seeing,in
    PROG ID give it as LIMU
    OBJECT TYPE give it as REPT
    OBJECT NAME give the program name
    Save
    K.Kiran

  • Not able to delete text elements.

    Hello
    I copied a z report from production server to development server by copying the code in se38.
    now system is no allowing me to delete a text element for parameter.
    SELECTION-SCREEN BEGIN OF BLOCK b4 with frame title text-012.
    PARAMETERS: P_YEAR  TYPE GJAHR OBLIGATORY DEFAULT 2014,       " Year
                 P_MONTH TYPE FCMNR AS LISTBOX  VISIBLE LENGTH 20 ,      " Month
                 P_COMP  TYPE BUKRS OBLIGATORY DEFAULT 1000.       " Company Code
    SELECT-OPTIONS S_PLANT FOR  vbrp-werks." Plant
                """PARAMETERS: P_FKART  AS CHECKBOX .             " Billing Document
    SELECTION-SCREEN END OF BLOCK b4.
    here my requirement is to disable PARAMETER : P_FKART and disable corresponding text element in system.
    i tried:
    1. deleting the text element row for p_fkart but it appears again when i save the text element.
    2.commenting the complete selection block and writing new selection block with text-012.system is taking same text element when i double click.
    thanks.

    Hi faizur,
    first of all: Programm changes are made in development system. not in produktion System. the transport oder is development system -> quality system -> production system.
    in your first statement above, you wrote
    "i tried commenting every line,which contains p_fkart.But system is not allowing me to activate the program."
    why shouldn't you be able to activate a programm when it is not caused by a syntax error?
    I mean deleting a selection-parameter from the selection-screen is basic stuff... as written above you normaly dont delete, you set it as "NO DISPLAY".
    when you got your programm activated again (and got rid of all the syntax errors you caused with the deletion) . Dont forget to activate the Text-Elements as well and it should work...
    regards
    Stefan Seeburger

Maybe you are looking for