Text format appears to be diffrent while retrieving from FR

Hi All,
We have a Financial report , designed with the help of FR studio. One of Columns of this FR is named "Affiliate Id " Which is pulling a unique ID for different companies. These Affiliate Ids are being pulled out from a data form where the entries are being submitted with the help of Smartview / Workspace.
Now the issue is that when FR is Run then the Affiliate Ids are Displayed in the following form: i mean the numeric values are being displayed Upto 6 decimal Places which is not the Way its should be and we want it to be without any decimal value as they are submitte in data form without any decimal value.Irony is that in the same FR we are getting the values in one another column(Governmenr Id) in proper way( Shown Below )
Affiliate ID
1063.000000
1063.000000
Aff ID Undefined
1557.000000
1489.000000
1063.000000
Government ReportID
31480
31709
In both The Columns, Values are being pulled as celltext and formulaes being used are:
For Affiliate ID:
<<CellText("Grid1", Cur, C(A), 1)>>
For Government ReportID:
<<CellText("Grid1", Cur, D(B), 1)>>
So Please help in knowing that what may be the possible cause of Affiliated ID being deisplayed with such huge decimal values how i can correct that, through FR studio or from workspace/ Data form from where it is being pulled.
Note:Even if we See the Affiliated ID in data form after submitting and refreshing, its picking decimal places there also same way.

Hi Thanos,
Version Used:11.1.1.3
Sorry for the confusion.
Yes We are submitting cell text.
For non-numeric data, we dont have any issue. Like if we submit "Aff ID Undefined",then its been shown in FR without any issue.
But When any numeric value is pulled in FR, that comes with 6 decimal places like 1234 shows as 1234.000000. You can see the below pattern(directly copied from FR)
Affiliate ID
1063.000000
1063.000000
Aff ID Undefined
1557.000000
1489.000000
1063.000000
Note: Issue is specifically with the Cell text submitted in data form through smartview/Excel. If we submit thorugh workspace, then we dont face this issue.
I hope it helps you understand the whole aspect.
Thanks ,
Satish

Similar Messages

Problems while retrieving from content repository

Hi,
I am facing problems while retrieving documents stored the content repository. I have some pdf files as well as text documents stored in the content repository. I need to get retrieve the contents of the text files. My problem lies with how to retrieve the data from the files.
I have used SCMS_URL_GENERATE, followed by the FM ''HTTP_GET''. Though I do get the File id , my problem is how to proceed from this point. Should i wriite an RFC ?
Thanks and Regards,
Anie

Hi,
I checked the code one again - SCMS_URL_GENERATE is used to send url to the user (to open file in web browser).
SCMS_HTTP_GET code looks like this:
CONCATENATE <ls>-vbeln space <ls>-optarcnr
INTO lv_vbeln_obj
RESPECTING BLANKS.
SELECT SINGLE *
FROM toa01
WHERE sap_object EQ 'VBRK'
    AND archiv_id EQ co_arch
    AND ar_object EQ 'SDOINVOICE'
    AND object_id EQ lv_vbeln_obj.
CALL FUNCTION 'SCMS_HTTP_GET'
EXPORTING
    crep_id   = co_arch
    doc_id    = toa01-arc_doc_id
    comp_id   = 'data'
    length    = 0
    no_cache = no_cache
IMPORTING
    length    = comp-size
    mimetype = comp-type
TABLES
    data      = comp-bin
EXCEPTIONS
    not_found = 1
    OTHERS    = 2.
IF sy-subrc IS NOT INITIAL.
    PERFORM log_create USING <ls>-vbeln.
ENDIF.
IF comp-bin IS NOT INITIAL.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      bin_filesize = comp-size
      filename     = dstpc
      filetype     = 'BIN'
    TABLES
      data_tab     = comp-bin
    EXCEPTIONS
      OTHERS       = 1.
IF sy-subrc IS NOT INITIAL.
    PERFORM log_create USING <ls>-vbeln.
ELSE.
    MESSAGE s000(38) WITH 'Success'.
ENDIF.
ENDIF.
Regards,
Przemysław

Formating numbers in a form after retrieving from an SQL database

Hello everyone,
I am using php to populate a form using numbers taken from an sql database. I am having a hard time showing decimal places in those numbers. The code I am using in the value section of the form is:
value="<?php if (isset($_POST['unit_price_1'])) {
     echo htmlentities( $_POST['unit_price_1'], ENT_COMPAT, 'UTF-8');
     } else {
          echo htmlentities($row_getInvoice['unit_price_1'], ENT_COMPAT, 'UTF-8');
     } ?>" />
This code rounds all numbers up and eliminates decimal places. I am trying to show dollars and cents.
How do I alter the code to accomplish what I want.
Jeff

Not sure what might come in your way here, so I just made the following simple test by using a static value rather than one which gets derived from a recordset (the source shouldn´t matter), and this works well for me without seeing the value altered in any way:
<?php
$value = "10.22";
?>
<input type="text" name="whatever" value="<?php echo htmlentities($value, ENT_COMPAT, 'UTF-8'); ?>" />
However,. for displaying numeric values you really don´t need to use htmlentities/ENT_COMPAT etc etc -- that´s something you´d rather use for displaying textual contents containg special characters like umlauts and such.
If all you need is to add some degree of protection by escaping special HTML characters (<, >, &, etc.), the function htmlspecialchars() will only be escaping just these characters and leave the rest "as is", whereas htmlentities() is notably more rigi, because this function will convert all applicable characters to HTML entities -- but again: at this point you´re just *displaying* some numeric value, that is, such security measures are pretty much pointless in this scenario, because there´s nothing to protect from ;-)
Please test what happens when doing away with the htmlentities - thing.
Cheers,
Günter

How to keep text formatting from a php flatplan to Indesign

Hi forum users
my question is this:
My company uses a PHP flatplan to recive and store work ready for the deisgners to place in indesign, however any text formatting ie bold, italics etc when copied from the flatplan dont keep when pasted into indesign, im just wondering if there is a way to keep the formatting if anyone knows.
Currently using Indesign 5.5 but wondering if Indesign 6 has any fixes for this etc
many thanks

It may not work for PHP, but there is an option in the prefs to include all information, or text only, when pasting from external applications.

Convert mm/dd/yyyy text format to date format

I imported a csv file and the date column is in text format. How do I convert it from m/d/yyyy text format to yyyy-mm-dd DATE format in Numbers v 3.1?
Thanks for any help you can give!

UPDATE: I found that your formula didnt produce the correct result
It changed mm/dd/yyyy to yyyy/dd/mm — rather than the desired yyyy/mm/dd
By hacking at it, I found that changing the D column formulas around fixed this.
Your original function:
D2=RIGHT(A2,4)&"-"&MID(A2, B2+1, C2−B2−1)&"-"&LEFT(A2,B2−1)
Changed:
D2 =RIGHT(A2,4)&"-"&LEFT(A2,B2−1)&"-"&+MID(A2, B2+1, C2−B2−1)

Can Pages 4.3 maintain defined text formatting for at a given list level?

I'm hoping the answer to this question is a simple 'duh' solution that I some how over looked. I'm using Pages 4.3 and I am trying to create a tiered list to organize ideas into different sublevels. I want to be able to write at a particular level, then create sub levels (return -> tab) with different formatting so the levels are easily distinguished at a glance. When I move back to the higher levels (return -> shift + tab), Pages maintaines the text formatting I used at the lower level, rather than returning to the previously used format at the higher level. For example, what I want is ....
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
What I get is...
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
This means that anytime I move up or down in the tiers of a list, I need to redefine the formatting for each new bullet. I tried creating my own list styles, but that does not appear to preserve changes made to fonts or sizes. This seems like such a simple function and time saver that I feel like I must be doing something wrong. It has been a while since I used pages, but I don't remember having these problems before. Does pages really require one to reset the formatting everytime the move between list levels?

Thanks Michael!
So your suggestion is to create the pricing in ECC and then download it in CRM...
Now tat would mean that first the mapping has to be performed in ECC for the existing paroducts and product category..then create pricing for those mapped prod. cat. in ECC and then download it to CR M..plz correct me if I am wrong...
regards,
Aneesh

XML Report in text format

Hi,
Can any one help how to create a XML report so that i should be saved in text format OR is there any way where when you click on view output a dialog box with open, save and cancel option appears so that i can save the output in required format.
Thanks,
Dinesh..

Hi Dinesh,
Can any one help how to create a XML report so that i should be saved in text format
While defining the respective concurrent program set the output to 'TEXT'. You can do this by:
Sysadmin > Concurrent > Program > Define ; and the select or define the program that you want the output to as TEXT
In the OUTPUT field ensure to have the type as 'TEXT'.
is there any way where when you click on view output a dialog box with open, save and cancel option appears so that i can save the output in required format.
Alternative to the above, while submitting the request after selecting your desired concurrent request , click on Option and change the output type.
Hope this Helps!
Thanks &
Best Regards,

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

Export to Text format

When a report is exported to Text format, trailing spaces do not appear in the exported file.
How do you resolve this issue?
1. Create a report.
2. Include 3 fields
3. Export ->txt
After the end of 3rd field we require 200 spaces...any idea...

Try to insert a new formula after the third field like this
space(200)
or try to create a formula for the third field like this
+space(200)
and place this formula in the place of the third field and export to text file.
Regards,
Raghavendra

DECODING MAIL FROM WEB SERVER IN PLAIN TEXT FORMAT(THE MAIL BEING SENT BY LABVIEW APPLICATION)

Hi All
I have a labview application that send mail every hour automatically.
But actually the mail has to be decoded from the web server(by another application).But now when that application decode the data in the mail(that is send by labview application)its getting some funny characters inside that can not be detected by the decoding application
(When open the mail no problem.)But actually our goal is to decode the mail from the web server.
Why the extra characters are appearing when decoding from the server?Is it because of the HTML format?
Is there option to send the mail in plain text format(not like attachment)?
In outlook we can change the setting (tools->options->send->mail sending format->....here we can set as HTML format/Plain Text format)
Like that at the sending time can i chenge the sending option as plain text format in my labview application?
Thanks...

smercurio_fc wrote:
Then it sounds to me like this other application is not decoding the attachment correctly, especially if you looked at the attachment yourself after you received it and verified it's correct.
No, no, smercurio. This is charcter encoding here. In older versions of LabVIEW you could specify what character encoding to use when sending an email through the SMTP VIs. But that gave problems since people in certain locales used certain characters that where not transfered right when the wrong encoding was specified, and that encoding stuff is not understood by most people at all, so the wrong selected encoding was rather the rule than the exception. In newer versions of LabVIEW do the SMTP VIs handle the encoding automatically based on the currently used locale on the system.
This change is documented in the Upgrade Notes of LabVIEW and probably happened around LabVIEW 7.1 or 8.0.
A decent mail client will recognize the encoding and convert it back to whatever is necessary before presenting it to the user. The OPs posters server application obviously isn't a smart mail client but probably just some crude text file parser that has no notion of proper mail character encoding and how to deal with it.
I would suppose that there is a chance to dig into the SMTP VIs itself and try to manipulate or disable that encoding altogether in there but that may open a whole can of worms somewhere else. The proper way would be to process the incoming mail by a character encoding aware mail client before passing it to the text parser. On Unix setting up something like this would be fairly trivial.
Rolf Kalbermatter
Message Edited by rolfk on 01-23-2008 10:21 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How can I keep my text format after pasting a text with a different format?

No matter when and where I start to write some text (whether it is a SImpleText, E-Mails, or anyother application's doc), if I have to cut and paste a text from a different source that is formatted differently than my original text (ie. the one I am already using ), once I have pasted the differently formatted text in my doc, the typeset changes while it continues to type with the same formatt used in the text I just pasted.
How can I continue typing with the same text formatt used before pasting the new text, after pasting the new text, without having to change size, font style etc. Is there a short cut?
What I have been doing to avoid this problem is: I usually type my entire text content (whether it is an E-Mail, or other doc) then, once I am done typing, I paste the text that was cut from a differently formatted document, so that my text remains with the same formatt in its integrity, while the pasted text stands out differently, but it is a bit complex doing that , because I not only have to remember to paste the other text when I am done typing (I run the risk of forgetting to paste the text I need to insert--which has happened already) or I keep struggling with my formatt change after the pasting of the new text, so my document text starts looking like the same text as the one which was just pasted.
Thanks for your time reading this!

KerrBr wrote:
How can I continue typing with the same text formatt used before pasting the new text, after pasting the new text, without having to change size, font style etc. Is there a short cut?
(1) First, let's make sure we're talking about the same thing. By "SImpleText, E-Mails" you mean TextEdit and Mail, right?
(2) Some apps (TextEdit, Mail) use the text engine provided by Mac OS X. By and large, these apps will behave in a similar manner. Others (eg, MS Word) use their own text engine, and their behaviour can be quite different. For such an app you need to consult its manual.
(3) In TextEdit, if you want the pasted text to adopt the current style, then use kurt188's tip.
(4) However, if you may want the pasted text to retain its own attributes, while you continue to type in the previous style. I don't know of any shortcut or command that will achieve this. However, you can try to work around it.
(4.1) TextEdit has the Copy Style (⌘⌥C) and Paste Style (⌘⌥V) commands. If you haven't yet used it, ⌘⌥V will insert the default style. So type, paste, ⌘⌥V, then continue typing. If you have used, it will insert whatever style was copied. You can, type, ⌘V, click somewhere before the pasted text, ⌘⌥C, click after the pasted text, ⌘⌥V, and continue typing.
(4.2) Alternatively, type your text. Then type one more character, eg, "x". Then ←, ⌘V, ⇧→, and start typing. The new text should adopt "x"'s format. (This should work in Mail, too. I don't know, because IMHO e-mail should always be plain text.)

Error while Retrieving view data from database

I am running an application ,in which I have used Apache Derby as a backend with the Hibernate mapping to achieve Object Oriented mapping.
I have created one view from which I want to retrieve data.
When I query the view as a VIEW, I am able to achieve that.
But while retrieving it through an object to that view if the Resultset is empty it doesnt give any Error.
but if there is a ResultSet found it gives an Error as follows.
Can anyone suggest me where the thing may be going wrong?
Could not execute query
ERROR 38001: The external routine is not allowed to execute SQL statements.     at org.apache.derby.iapi.error.StandardException.newException(Unknown Source)
     at org.apache.derby.impl.sql.conn.GenericAuthorizer.externalRoutineException(Unknown Source)
     at org.apache.derby.impl.sql.conn.GenericAuthorizer.authorize(Unknown Source)
     at org.apache.derby.exe.acb9810038x0105x852ex632bx0000000a5a101.fillResultSet(Unknown Source)
     at org.apache.derby.exe.acb9810038x0105x852ex632bx0000000a5a101.execute(Unknown Source)
     at org.apache.derby.impl.sql.GenericActivationHolder.execute(Unknown Source)
     at org.apache.derby.impl.sql.GenericPreparedStatement.execute(Unknown Source)
     at org.apache.derby.impl.jdbc.EmbedStatement.executeStatement(Unknown Source)
     at org.apache.derby.impl.jdbc.EmbedPreparedStatement.executeStatement(Unknown Source)
     at org.apache.derby.impl.jdbc.EmbedPreparedStatement.executeQuery(Unknown Source)
     at net.sf.hibernate.impl.BatcherImpl.getResultSet(BatcherImpl.java:89)
     at net.sf.hibernate.loader.Loader.getResultSet(Loader.java:880)
     at net.sf.hibernate.loader.Loader.doQuery(Loader.java:273)
     at net.sf.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:138)
     at net.sf.hibernate.loader.Loader.doList(Loader.java:1063)
     at net.sf.hibernate.loader.Loader.list(Loader.java:1054)
     at net.sf.hibernate.hql.QueryTranslator.list(QueryTranslator.java:854)
     at net.sf.hibernate.impl.SessionImpl.find(SessionImpl.java:1554)
     at net.sf.hibernate.impl.QueryImpl.list(QueryImpl.java:49)
     at wheatbox.dao.MessageHeaderDAO.getRecipients(MessageHeaderDAO.java:103)
     at org.apache.derby.exe.acb9810038x0105x852ex632bx0000000a5a100.e2(Unknown Source)
     at org.apache.derby.impl.services.reflect.DirectCall.invoke(Unknown Source)
     at org.apache.derby.impl.sql.execute.ProjectRestrictResultSet.doProjection(Unknown Source)
     at org.apache.derby.impl.sql.execute.ProjectRestrictResultSet.getNextRowCore(Unknown Source)
     at org.apache.derby.impl.sql.execute.BasicNoPutResultSetImpl.getNextRow(Unknown Source)
     at org.apache.derby.impl.jdbc.EmbedResultSet.movePosition(Unknown Source)
     at org.apache.derby.impl.jdbc.EmbedResultSet.next(Unknown Source)
     at net.sf.hibernate.loader.Loader.doQuery(Loader.java:284)
     at net.sf.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:138)
     at net.sf.hibernate.loader.Loader.doList(Loader.java:1063)
     at net.sf.hibernate.loader.Loader.list(Loader.java:1054)
     at net.sf.hibernate.hql.QueryTranslator.list(QueryTranslator.java:854)
     at net.sf.hibernate.impl.SessionImpl.find(SessionImpl.java:1554)
     at net.sf.hibernate.impl.SessionImpl.find(SessionImpl.java:1531)
     at net.sf.hibernate.impl.SessionImpl.find(SessionImpl.java:1523)
     at wheatbox.search.WheatBoxSearchFactory.exceuteQuery(WheatBoxSearchFactory.java:68)
     at wheatbox.ui.AdvSearchCriteriaPanel.createQuery(AdvSearchCriteriaPanel.java:831)
     at wheatbox.ui.AdvSearchCriteriaPanel.search(AdvSearchCriteriaPanel.java:571)
     at wheatbox.ui.AdvSearchCriteriaPanel.actionPerformed(AdvSearchCriteriaPanel.java:640)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

Get "An Error occurred while retrieving data From ProjectWebApp.." when searching content on an External Content Type

I have set-up an ECT in SPD2013 on SP2013. It is a SQL Data source called ProjectWebApp. I have BCS/SSS set-up. I can create an ECT OK in SPD. I can add the ECT to a custom list.
The problem is when I add a new item in the list the following error message appears in red
An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
I cannot filter or return any results. There is data in the DB.
Another test I do is to try and create a new App/List using the "External List" template. When
I select the ECT a red message appears "External Content Types are not available". which is odd since I can add an ECT to a list as mentioned above.
Any ideas?
Tx
Andrew
Andrew Payze

Hi Andrew,
Please try the option Allow unlimited length in document libraries in the column settings:
http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
Please provide error message in ULS log for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How can I click on a button and make a text box appear or disappear

How can I click on a button and make a text box appear or disappear?
Thanks ahead of time for your help,
Doug

Hi Denes,
I just thought that the example you pointed the OP to, is far more complex than what I understood he needs. The OP was talking about using a button, which I thought was a very basic and simple case. Your example is much more complicated. If memory serves, the radio group item, at the time (prior to 3.1 fieldset) behaved differently, so you needed to create a new value retrieving function, and then was the need to preserve the items show/hide status upon reloading the page. In short, I thought maybe I didn’t see the complexity in the OP post, but it seems that his requirement was indeed a simple one.
Regards,
Arie.

Text format appears to be diffrent while retrieving from FR

Similar Messages

Maybe you are looking for