Text gets jumbled up after publishing.

After publishing my text gets illegable. Sentences are written over each other. Mabybe my texts are too long. Some pieces are ok but at the end of the text trouble starts.

Perhaps check in iWeb that you don't have text boxes that are overlapping each other. This can be a cause. Also, if you know that you have a long piece of text to publish, just use one text box rather than a few. This makes more sense and it is less likely that any box will overlap.

Similar Messages

Text getting jumbled

i have a vendor working on a mac through an online system where she enters info into a webform then prints the entire thing to pdf. i have about 100 other vendors who do this with no issues, but all are on pc's, although i dont think the OS is the problem. whenever i try to edit a pdf printed down from this persons webform and then edit it for my business the text gets jumbled at various stages. It can happen when saving, copying something from one page to another, putting any text in at all. I dont notice the jumble right away but when i move to another page from the one i was editing, then i see the issues. Acrobat is completely updated working on windows 7 64 bit that is completely up to date as well. we are using IE8,9 and the most recent version of Firefox to test but this happens on every machine we try. Can anyone help?

Nope,
If I understand - there is a fillable pdf hosted online, or there is a webased submission which is funneling the data into a pdf.
That pdf has a default font assinged for the fields.
If this is the case, this might be better posted to the Acrobat Forms Forum
http://forums.adobe.com/community/acrobat/forms
wondergoat77 wrote:
online system where she enters info into a webform then prints the entire thing to pdf
That print engine may be able to embedd the fonts complete. Change the "Subset when fonts used is less than" to 0%

Sound at beginning of slide gets cut off after publishing

Hi,
Any idea why a perfectly good slide might have just the
beginning of the sound consistently cutting off the beginning of
the slide? It didn't happen in Preview, but now it's happening
since I've published it to the Web.
Also, I found when playing it in Safari on a Mac this morning
that suddently the audio got ahead of the slides, then paused, the
slides slowly caught up, and then started syncing again. Any idea
what might be causing this?
Bob

Rick,
Once again, a huge help. I would never have thought of daisy
chaining as the solution and after reading your link, I can see why
this is probably the culprit. I am wondering...I have a three
button "menu" early on that either continues or jumps to the end of
the slides to show a couple of short pieces, (about the author,
management tracking). I want to have all three accessible at any
point in the slideshow, so I'm wondering how daisy chaining them
might effect this, if at all. Could someone in the third part of
the daisy chain easily jump back to the first? Or instead, should I
move the short pieces into the first piece? I guess I'm wondering
if daisy chaining allows the broswer to unload the previous ones to
free up memory, and therefore not allowing the user to access the
earlier pieces. Thanks again. You've been a great help...and on New
Year's Day at that!
Bob

Album art gets jumbled up after iTunes sync

Hi everyone,
When I sync music to my iPhone 4S with iOS 7, about a third of the album artwork gets mixed up, and songs have the wrong corresponding images. This has only become a problem since upgrading to iOS 7. Playback is fine, and this is a minor issue.
Suggestions?
Thanks,
Thomas

Hey there dudeinanigloo,
It sounds like your album artwork is incorrect when you sync your device.
I was thinking it would be a good idea to restart both the phone, and the computer first:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
When that is done, resync your music by connecting your phone to the computer, and going to the Music tab of the phone in iTunes. Uncheck the Sync Music checkbox, click apply and let that finish. When it is done, recheck the Sync Music checkbox and click apply again to get the content back on the phone and see how it looks.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Pages not blue after publishing

I've published my site twice the page two days. Yesterday I could not get the site after publishing. The pages did not turn blue. Today I started over and published the entire site again. Got the notice my site had been published. Went to the site. All's ok there, but iWeb program has not turned the 'red' pages 'blue' indicating that they have been published. Should I publish again?

Le_Anne Brown wrote:
I looked but didn't find that discussion. Wrong search terms.
Rather than reading my reply only in email, look at the actual thread and you'll see it's a clickable link — so you don't need to search.
...But also searching should have found it — click here.

Captivate 3 audio problems after publishing...

Help please... having problems with audio getting messed up after publishing. I'm recording all audio w/in Captivate3. When I publish and put on our browser, the audio is missing on some slides, also if you pause for FF the video, the audio sometimes is overlaping, or not in sync. Any suggestions?
Thank you
Bev

Hey Luke,
I apologize for not getting back sooner, been swamped at work and I'm
moving. OK here is my laundry list of bugs and nice to haves:
   - BUG - If I add silence to the beginning or end of a wavelength, it
   gets cut off when I save and close the wavelength. I then have to reopen
   the wavelength and add it back in and save it again. If I don't add silence
   the audio gets cut off when I publish. This has to be done for every slide
   I have and it's very repetitive.
   - BUG - If I create a movie over say 45 slides, the slides bleed into
   one another and images are lost or added to the next slide. If I use Fade
   for the transition it's even worse.
   - BUG - If I use Fade for a transition between slides with characters
   the characters bleed from one slide to the next.
   - NICE TO HAVE - The ability to set Preferences for characters per
   project or for all projects. For example, set the size and duration
   defaults.
   - NICE TO HAVE - It would be nice to have the default tab on the audio
   wavelengths be Edit not Add or Replace. I do a lot of narrating so having
   to click Edit for each slide becomes tedious.
OK, I want to be clear that I'm not beating up Adobe programmers and I do
LOVE the tool. It would just be a smoother experience if the above worked
or were in place. I do also have to add that I love all of the new widgets
and games!!! Haven't had time to explore them all, but I will soon and I'll
let you know more when I do. BTW are you sharing these email threads with
Adobe? Maybe we should put this online, what do you think?

After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts, I'd appreciate if you have any useful suggestions. Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=

After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts. I'm using Adobe media encoder and it outputs the file as f4v formate and when inserted into the adobe captivate 8 project, I found that I'm still getting the same error message after publishing the project. I'd appreciate if you have any useful suggestions.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2036: Load Never Completed. URL: file://C:\Users\User\AppData\Local\Temp\Rar$DIa0.291\haloSkin1_as3_progressive.swf"]
Thanks in advance
Warm Reagrds

After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts. I'm using Adobe media encoder and it outputs the file as f4v formate and when inserted into the adobe captivate 8 project, I found that I'm still getting the same error message after publishing the project. I'd appreciate if you have any useful suggestions.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2036: Load Never Completed. URL: file://C:\Users\User\AppData\Local\Temp\Rar$DIa0.291\haloSkin1_as3_progressive.swf"]
Thanks in advance
Warm Reagrds

Text and table structure getting jumbled up in the smartform output

Hi all ,
While viewing the print preview of a smartform output , i am facing a strange issue.
The hardcoded text is getting jumbled up .For eg:"As soon as possible" becomes " as possible . soon as"
The structure of the table is also getting reversed.That is the table is now getting displayed with the last couloum first.The data in the table is also coming in the reverse order.
While executing the smartform directly , the layout is coming in the proper order.But while executing this through a transaction (FINT) , this issue is coming up.The print program is a standard program.
I have tried deleting the window , copying it to a new smartform etc.I have also tried in different systems to check whether if it is an issue with the system.
If anyone has faced a similar issue , please let me know how to solve it.Thanks a lot in advance.
Regards,
Rashmi

Hi
Please check the Printout rather the print Preview. and also check the Structure/table entries also that u printing and also if u r using template, then check the assignment 1 of 1 , etc to the texts.
surya

How do I get a website live with BC after publishing it?

How do I get a website live with BC after publishing it?

Hi
You would need push site live , in admin dashboard of the site you would get the option "Launch Site".
Please checkout this video :
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-muse-creating-and-publishing-sites/
Thanks,
Sanjit

Do I not get the "open file after publishing" checkbox with the trial version?

I owned the Adobe Acrobat 8 Professional version on my pc, and recently bought a Mac. Do I not have the option to "Open file after publishing" checkbox with the trial version? Do I have to repurchase the whole program to get that?

uninstall.
download from prodesigntools.com.
if you follow all 7 steps you can directly download a trial here: New Adobe Lightroom 6 (CC) Direct Download Links – Free Trials | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Text moving after publishing!

After publishing my site, text moves around. I have tried creating new pages- copying over the slideshow and recreating the text, but it still jumps. Any suggestions?
Compare these three pages-
http://architerra-inc.com/web/about.html
http://architerra-inc.com/web/awards.html
http://architerra-inc.com/web/news.html
http://architerra-inc.com/web/who-we-are.html

Thank you for your Reply.
1. These elements are not on the Master Page because on the "About" page, two of the menu items are actually tooltips, not links, and on the other pages, they are text links.
2. It happens in Preview as well.

All text getting fat upon publishing

when i publish to .mac, all the text gets fatter, like it was set to bold somewhere in process (except for text that actually is bold, which is now double-bold).
i'm viewing the page with safari on my own computer.

I have also experianced this problem on my site's main page (http://www.wmuthetatau.com). I think this might be more of a Safari bug then anything. I'm viewing my site right now from a Windows XP computer using Firefox and I'm not having the same problem. Try viewing your site with Firefox and see if your problem persists.

After publishing page I get redirected to C Drive!

Hi - I can connect to the server, make and edit but after
publishing, Contribute redirects me to this page:
C:\Program Files\Adobe\Adobe Contribute
CS3\Configuration\Templates\Default.html
Please help! It's SO ANNOYING!
Thanks

I don't have the answer, but I put a short sentence in that
file you described and noticed the following:
1. I created a new blanc page
2. When I published this blank page the sentence I put in
C:\Program Files\Adobe\Adobe Contribute
CS3\Configuration\Templates\Default.html was visible for a very
short time
3. When I cancelled this blank page the sentence I put in
C:\Program Files\Adobe\Adobe Contribute
CS3\Configuration\Templates\Default.html was visible for a very
short time
It seems top me taht this delfault.html file is used to
create a blank page, but strangely the sentence I put in doesn't
appear visible ijn the draft or in the published new html file. My
version of Contribute doesn't hang on this page, but passes without
any problem to the page I created or the page I was when I
cancelled the new page.
Maybe you should contact Adobe and find out what the reason
is for calling this file or try to reinstall the program.

Want to play a video in pop up via a CEWP link in sp 2013 but facing issue after publishing the page pop up does not open

Hi All,
My Steps:-
0<sup>th</sup> Step:-
Upload a video in any doc library.
1<sup>st</sup> step:-
Add the uploaded link in App as per instruction
http://stevemannspath.blogspot.com/2012/12/sharepoint-2013-videos-in-sharepoint.html
2nd step:-
write this script in CEWP or in text and give reference to CEWP
<script type="text/javascript">
function OpenPage()
var options = SP.UI.$create_DialogOptions();
options.width = 850;
options.height = 700;
options.allowMaximize = true;
options.url="/sites/customer/VideoAsset/Forms/Video/videoplayerpage.aspx?ID=3&FolderCTID=0x0120D520A808003912E936CB74764285313433CC275AC3&List=b5087562-892a-417a-b02c-0d377d87f205&RootFolder=%2Fsites%2Fcustomer%2FVideoAsset%2FGrowth%5FDevelopment%2FAdditional%20Content&RecSrc=%2Fsites%2Fcustomer%2FVideoAsset%2FGrowth%5FDevelopment";
SP.UI.ModalDialog.ShowModalDialog(options);
</script>
<span class="s4-clust" style="display: inline-block; overflow-x: hidden; overflow-y: hidden;width: 10px; ; height: 10px; ">
<img src="/sites/customer/Style%20Library/Images/You_Tube.png" alt="" style="left: 0px !important; ; top: -128px !important; "/>
</span>
<text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">
</text>
<div class="secondary" style="padding-left: 3px;">
<a href="javascript:OpenPage()">Open</a>
</div>
I am getting error on below line-
var
options = SP.UI.$create_DialogOptions();
"object does not support this property and method"
Please help and let me know the solution.
sudhanshu sharma Do good and cast it into river :)

Also check if your javascript retains after Publishing. Sharepoint will remove malcious code/script html after saving the page and make page safe.
Regards,
Vaibhav Tikam
http://codepinch.blogspot.com
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Mark As Answer". It'll help other users who are visiting your thread for the
similar problem

Check printing: Amount in words is getting jumbled

Hi,
I have a problem in displaying amount in words in check.
I am getting the amount in words through functuion module SPELL_AMOUNT correctly,i.e,(for example,110,002 ) ONE HUNDRED TEN THOUSAND TWO.
After getting the amount,i am concatenating the words 'ONLY' amount 'RIYALS'.In program it is concatenated correctly.Expected output is RIYALS ONE HUNDRED TEN THOUSAND ONLY.
But when seen on screen,the words are getting jumbled.
It is getting displayed as TWO RIYALS ONLY ONE HUNDRED TEN THOUSAND.
(Note: My form is in arabic,since i want to display vendor name in arabic,and rest of the check in english).
Please help me with some solution.
Thanks & Regards
Seshagiri.

Hi Dishant,
Sorry for the delay.I am pasting the code below:
Code in print program:
Global data:
data: gv_riyals(6) value 'RIYALS', "RIYALS
      gv_only(4) value 'ONLY',
      gv_halalas(7) value 'HALALAS',
      gv_and(3) value 'AND'.
Local data:
        data: lw_dummy(25),
              lw_fraction(2),   "for fraction part of amount in HALALAS
              lw_integer type i.
        if spell-decimal is initial.
          clear: spell-decimal, dg_100.
        else.
           lw_integer = spell-decimal / 10.
           lw_fraction = lw_integer.
           concatenate '(' lw_fraction '/100)'
                   into lw_dummy. " SEPARATED BY space.
           condense lw_dummy.
           clear dg_100.
           dg_100 = lw_dummy.
        if not spell-word is initial.
          condense spell-word.
          gv_spell_word(50) = spell-word. "Amount in RIYALS
        endif.
     endif.
          call function 'WRITE_FORM'
            exporting
              window = 'PAY_DOC'
              element = 'PAY_DOC'
            exceptions
              window = 1
              element = 2.
          if sy-subrc eq 2 and
            ( err_element-fname ne t042e-zforn
            or err_element-fenst ne 'PAY_DOC'
            or err_element-elemt ne 'PAY_DOC' ).
            err_element-fname = t042e-zforn.
            err_element-fenst = 'PAY_DOC'.
            err_element-elemt = 'PAY_DOC'.
            err_element-text = text_530.
*--Code in the script:
/: IF &DG_100& EQ ' '
L1 &gv_only(C)&,,&gv_riyals(C)&,,&spell-word&
/: ELSE
L1 &gv_riyals(C)&,,&gv_spell_word(C)&
L1 &gv_only(C)&,,&gv_halalas(C)&,,&dg_100(C)&,,&gv_and(C)&
/: ENDIF
Thanks & Regards
Seshagiri.

Text gets jumbled up after publishing.

Similar Messages

Maybe you are looking for