Text inversed in the smart form table

Dear all,
I'm new in ABAP and working on a smart form which has a cell in table shows an article description in both Arabic & English
but the Arabic text appears in reversed sequence in the print preview and after printing it shows like this ##### #########.
any idea how to solve this problem
thanks

Hello,
Please see the following SAP Note about printing Arabic:
587150 - Support of Arabic-script languages
For your Unicode system, then you should be able to print Arabic
characters via device type ARSWIN or device type SWINCF.
The Unicode cascading fonts solution with the device type SWINCF
described in the following SAP Note:
812821 - Cascading Font settings
So you need to configure a Frontend output device that uses device type
ARSWIN and use this to create the print with the Arabic characters.
Regards,
David

Similar Messages

For this program i could send the smart form thru mail but in the inbox ..

*& Report ZSFOO
REPORT ZSFOO.
*& Report ZSFINV
TABLES : KNA1,         " General Data In Customer Master
         KNB1,         " Customer Master(Company Code)
         BSID,         " Accounting: Secondary Index for Customers
         ZSMARTFORM,   " Custom table for Storing Bank Details
         zsf_exp_inv, " Structure that stores required fields from all tables used
         KNVK.         " Customer Master Contact Partner
data : Begin of it_struct occurs 0.
        include structure zsf_exp_inv01.
data : End of it_struct.
types : begin of ty_bsid,
        kunnr like bsid-kunnr,
        WAERS like bsid-WAERS,
        XBLNR LIKE BSID-XBLNR,
        BUDAT LIKE BSID-BUDAT,
        WRBTR LIKE BSID-WRBTR,
        BUKRS LIKE BSID-BUKRS,
        end of ty_bsid.
types : begin of ty_kna1,
        kunnr like kna1-kunnr,
        NAME1 LIKE KNA1-NAME1,
        STRAS LIKE KNA1-STRAS,
        MCOD3 LIKE KNA1-MCOD3,
        LAND1 LIKE KNA1-LAND1,
        SORTL LIKE KNA1-SORTL,
        end of ty_kna1.
types : begin of ty_knb1,
        kunnr like knb1-kunnr,
        ZTERM LIKE KNB1-ZTERM,
        end of ty_knb1.
types : begin of ty_knVK,
        kunnr like kNVK-kunnr,
        NAME1 LIKE KNVK-NAME1,
        end of ty_knVK.
types : begin of ty_ZSMARTFORM,
        SNO      LIKE ZSMARTFORM-SNO,
        CURRENCY LIKE zsmartform-currency,
        BANKNAME LIKE zsmartform-bankname,
        ADDRESS1 LIKE ZSMARTFORM-ADDRESS1,
        ADDRESS2 LIKE ZSMARTFORM-ADDRESS2,
        ADDRESS3 LIKE ZSMARTFORM-ADDRESS3,
        ADDRESS4 LIKE ZSMARTFORM-ADDRESS4,
        ADDRESS5 LIKE ZSMARTFORM-ADDRESS5,
        ADDRESS6 LIKE ZSMARTFORM-ADDRESS6,
        VALIDFROM LIKE ZSMARTFORM-VALIDFROM,
        VALIDTO   LIKE ZSMARTFORM-VALIDTO,
        end of ty_ZSMARTFORM.
data : it_bsid type table of ty_bsid,
       it_kna1 type table of ty_kna1,
       it_knb1 type table of ty_knb1,
       it_zsmartform type table of ty_zsmartform,
       it_knVK type table of ty_kNVK.
data : wa_bsid like line of it_bsid,
       wa_kna1 like line of it_kna1,
       wa_knb1 like line of it_knb1,
       wa_zsmartform like line of it_zsmartform,
       wa_knVK like line of it_knVK.
*****************Selection Screen**********************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR,
                 S_belnr FOR BSID-belnr,
                 S_BUKRS FOR BSID-BUKRS,
                 S_CURR FOR ZSMARTFORM-CURRENCY.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF IT_PARAM OCCURS 0.
        INCLUDE STRUCTURE ZPARAMETERS.
DATA : END OF IT_PARAM.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
SKIP 1.
Parameters : OPTION1 AS CHECKBOX,
             P_POINF(300) type c,
             OPTION2 AS CHECKBOX,
             P_DESC(300) TYPE C,
             OPTION3 AS CHECKBOX,
             P_MONTH(200) TYPE C,
             OPTION4 AS CHECKBOX,
             P_RATE(100) TYPE C.
SELECTION-SCREEN END OF BLOCK B2.
**********************PARAMETERS***********************************
data : l type i,
        Y(300) type c,
        j type i,
        k type i value 1,
        s type i,
        m(300) type c,
        p type i,
        z type i.
data : l1 type i,
        Y1(300) type c,
        j1 type i,
        k1 type i value 1,
        s1 type i,
        m1(300) type c,
        p1 type i,
        z1 type i.
data : l2 type i,
        Y2(300) type c,
        j2 type i,
        k2 type i value 1,
        s2 type i,
        m2(300) type c,
        p2 type i,
        z2 type i.
data : l3 type i,
        Y3(300) type c,
        j3 type i,
        k3 type i value 1,
        s3 type i,
        m3(300) type c,
        p3 type i,
        z3 type i.
IF OPTION1 = 'X'.
concatenate P_POINF ',' into P_POINF.
l = strlen( P_POINF ).
do l times.
    Y = P_POINF+j(k).
    case Y.
      when ','.
        m = P_POINF+s(z).
        s = j + 1.
        z = -1.
        p = p + 1.
        if p = 1.
          IT_PARAM-LINE1 = m.
        endif.
        if p = 2.
          IT_PARAM-LINE2 = m.
        endif.
        if p = 3.
          IT_PARAM-LINE3 = m.
        endif.
     when '.'.
        if p = 4.
          IT_PARAM-LINE4 = m.
        endif.
    endcase.
    j = j + 1.
    z = z + 1.
enddo.
ENDIF.
IF OPTION2 = 'X'.
concatenate P_DESC ',' into P_DESC.
l1 = strlen( P_DESC ).
do l1 times.
    Y1 = P_DESC+j1(k1).
    case Y1.
      when ','.
        m1 = P_DESC+s1(z1).
        s1 = j1 + 1.
        z1 = -1.
        p1 = p1 + 1.
        if p1 = 1.
          IT_PARAM-LINE5 = m1.
        endif.
        if p1 = 2.
          IT_PARAM-LINE6 = m1.
        endif.
        if p1 = 3.
          IT_PARAM-LINE7 = m1.
        endif.
     when '.'.
        if p1 = 4.
          IT_PARAM-LINE8 = m1.
        endif.
    endcase.
    j1 = j1 + 1.
    z1 = z1 + 1.
enddo.
ENDIF.
IF OPTION3 = 'X'.
concatenate P_MONTH ',' into P_MONTH.
l2 = strlen( P_MONTH ).
do l2 times.
    Y2 = P_MONTH+j2(k2).
    case Y2.
      when ','.
        m2 = P_MONTH+s2(z2).
        s2 = j2 + 1.
        z2 = -1.
        p2 = p2 + 1.
        if p2 = 1.
          IT_PARAM-LINE9 = m2.
        endif.
        if p2 = 2.
          IT_PARAM-LINE10 = m2.
        endif.
        if p2 = 3.
          IT_PARAM-LINE11 = m2.
        endif.
     when '.'.
        if p2 = 4.
          IT_PARAM-LINe12 = m2.
        endif.
    endcase.
    j2 = j2 + 1.
    z2 = z2 + 1.
enddo.
ENDIF.
IF OPTION4 = 'X'.
concatenate P_RATE ',' into P_RATE.
l3 = strlen( P_RATE ).
do l3 times.
    Y3 = P_RATE+j3(k3).
    case Y3.
      when ','.
        m3 = P_RATE+s3(z3).
        s3 = j3 + 1.
        z3 = -1.
        p3 = p3 + 1.
        if p3 = 1.
          IT_PARAM-LINE13 = m3.
        endif.
        if p3 = 2.
          IT_PARAM-LINE14 = m3.
        endif.
        if p3 = 3.
          IT_PARAM-LINE15 = m3.
        endif.
        if p3 = 4.
          IT_PARAM-LINe16 = m3.
        endif.
    endcase.
    j3 = j3 + 1.
    z3 = z3 + 1.
enddo.
ENDIF.
APPEND IT_PARAM.
select * from kna1 into corresponding fields of table it_kna1 where kunnr in s_kunnr.
select * from knb1 into corresponding fields of table it_knb1 for all entries in it_kna1 where kunnr = it_kna1-kunnr.
select * from bsid into corresponding fields of table it_bsid for all entries in it_kna1 where kunnr = it_kna1-kunnr and belnr in s_belnr and bukrs in s_bukrs..
SELECT * FROM KNVK INTO CORRESPONDING FIELDS OF TABLE IT_KNVK FOR ALL ENTRIES IN IT_KNA1 WHERE KUNNR = IT_KNA1-KUNNR.
select * from zsmartform into corresponding fields of table it_zsmartform .
DATA : AMT LIKE SPELL.
loop at it_bsid into wa_bsid.
read table it_kna1 into wa_kna1 with key kunnr = wa_bsid-kunnr.
read table it_knb1 into wa_knb1 with key kunnr = wa_bsid-kunnr.
read table it_zsmartform into wa_zsmartform with key CURRENCY = wa_bsid-WAERS.
READ TABLE IT_KNVK INTO WA_KNVK WITH KEY KUNNR = WA_BSID-KUNNR.
it_struct-name1 = wa_kna1-name1.
it_struct-stras = wa_kna1-stras.
it_struct-mcod3 = wa_kna1-mcod3.
it_struct-land1 = wa_kna1-land1.
it_struct-sortl = wa_kna1-sortl.
it_struct-zterm = wa_knb1-zterm.
it_struct-xblnr = wa_bsid-xblnr.
it_struct-currency = wa_zsmartform-currency.
it_struct-currency = wa_bsid-waers.
it_struct-budat = wa_bsid-budat.
it_struct-BANKNAME = wa_zsmartform-BANKNAME.
it_struct-ADDRESS1 = wa_zsmartform-ADDRESS1.
it_struct-ADDRESS2 = wa_zsmartform-ADDRESS2.
it_struct-ADDRESS3 = wa_zsmartform-ADDRESS3.
it_struct-ADDRESS4 = wa_zsmartform-ADDRESS4.
it_struct-ADDRESS5 = wa_zsmartform-ADDRESS5.
it_struct-ADDRESS6 = wa_zsmartform-ADDRESS6.
it_struct-CURR = WA_BSID-WRBTR.
IT_STRUCT-NAME = WA_KNVK-NAME1.
IT_STRUCT-AMOUNT = IT_SPELL-AMT.
append it_struct.
endloop.
data : x type i,
       x1 type i,
       a type string.
loop at it_struct.
x = strlen( it_struct-curr ).
x1 = x - 3.
a = it_struct-curr+0(x1).
CALL FUNCTION 'SPELL_AMOUNT'
      EXPORTING
        AMOUNT          = a
CURRENCY        = ' '
FILLER          = ' '
LANGUAGE        = SY-LANGU
      IMPORTING
        IN_WORDS        = AMT.
EXCEPTIONS
NOT_FOUND       = 1
TOO_LARGE       = 2
OTHERS          = 3
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
endloop.
DATA: ws_ucomm LIKE sy-ucomm.
DATA: form_name TYPE rs38l_fnam.
DATA: wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop.
data : i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
      i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: t_otfdata TYPE ssfcrescl,
t_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
      i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
data : wa_objhead TYPE soli_tab,
wa_doc_chng typE sodocchgi1,
      w_data TYPE sodocchgi1,
      wa_buffer TYPE string,
      v_len_in LIKE sood-objlen,
      v_len_out LIKE sood-objlen,
      v_len_outn TYPE i,
      v_lines_txt TYPE i,
      v_lines_bin TYPE i.
DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE string.
DATA: w_bin_filesize TYPE i.
wa_ctrlop-getotf = 'X'.
CALL FUNCTION '/1BCDWB/SF00000001'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_outopt
user_settings = 'X'
IN_WORDS = amt
importing
job_output_info = t_otfdata
TABLES
I_ZSF_EXP_INV = it_struct
I_ZPARAMETERS = it_param.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
bin_filesize = w_bin_filesize
CODEPAGE = ' '
filename = 'c:     est59.PDF'
filetype = 'BIN'
IMPORTING
filelength = w_filesize
TABLES
data_tab = t_pdf_tab
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10
IF sy-subrc <> 0.
*You should include message-id in the report heading
WRITE : sy-subrc.
ELSE.
WRITE : 'File Test.pdf downloaded succesfully'.
ENDIF.
loop at t_pdf_tab.
    translate t_pdf_tab using '~'.
    concatenate wa_buffer t_pdf_tab into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
    i_record = wa_buffer.
    append i_record.
    shift wa_buffer left by 255 places.
    if wa_buffer is initial.
      exit.
    endif.
enddo.
Attachment
refresh:
    i_reclist,
    i_objtxt,
    i_objbin,
    i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'O'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Hazard report-' p_load '.pdf' INTO i_objpack-obj_descr.
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-obj_descr = 'test'.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
     i_reclist-express = 'X'.
i_reclist-rec_type = 'U'.
append i_reclist.
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
         EXPORTING
              document_data              = wa_doc_chng
              COMMIT_WORK = 'X'
              put_in_outbox              = 'X'
         TABLES
              packing_list               = i_objpack
              object_header              = wa_objhead
              CONTENTS_BIN               = i_objbin
              contents_txt               = i_objtxt
              receivers                  = i_reclist
         EXCEPTIONS
              too_many_receivers         = 1
              document_not_sent          = 2
              document_type_not_exist    = 3
              operation_no_authorization = 4
              parameter_error            = 5
              x_error                    = 6
              enqueue_error              = 7
              others                     = 8.
for this program i could send the smart form thru mail but in the inbox i could not
download it it says needed to be decoded properly.file not starting with pdf....
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ELSE.
     CALL FUNCTION 'POPUP_TO_INFORM'
       EXPORTING
         titel = 'Mail sent'(003)
         txt1 = 'The report is sent via e-mail.'(004)
         txt2 = ' '.
     LEAVE PROGRAM.
   ENDIF.

hi krishna,
u r right. there is no error in sending the mail and the file but the problem is that file created and converted to pdf is not done properly.jst verify whether the file is created properly or not .thats the only problem that can occurs else ur program is absolutely right.

How to debug the smart forms

Hi All,
Can any body guide me how to debug the smart forms.
Thanks & Regards,
Satish.

Hi,
The the best way to debug the form is to put a breakpoint in the function module generated by the smartform.
Procedure:
Open the smartform we want to debug.
Goto Environment -> Function module name.
Open the function module in SE37. From the menu GOTO -> main program. Open the last include.
This incude contains the entire code ie the code we have written in initalization + form routines + program lines + sap generated code.
Even we can search for the text nodes, folders, templates, tables, graphics, address nodes etc with their names.
Put a breakpoint at any point you want.
If we issue any doc which triggers this form, when the control reaches the break point it will stop.
Please note that hard-coding the break points in the code ( Program lines ) is not recommended and it can´t be done unless if it is development server.
So, always put a session break point in the related function module.
We can use SFTRACE transaction to know the sequence of the control flow.
If you want to break at each and every text that is printed on the output form put the break points in the forms.
1. %write_text to break at text element.
2. %WRITE_TEXT_MODULE to break at text module.
3. %WRITE_INCLUDE_TEXT to break at include text.
Please put a break point at the first sy-subrc check.
If the control reaches this point, you can find the name of the element in the varible NAME and the content in the text node in %TEXT.
Its easy to understand the sequence of the printing if we put a breakpoint as stated above.
Regards,
Satish.

How to assign standard texts assign dynamically to smart forms

Dear Experts
I need your help in adjusting the smart form texts dynamically. I will explain you the situation please revert me your valuable answers.
1. I am integrating 12 smart forms using same program.
2. Out of 12 smart forms 4 forms are having similar kind of template. Client is requesting like create one smart form template.
3. By creating the standard texts you can assign the standard texts into smart form during runtime dynamically.
4. Maintain all standard texts for smart forms in another custom table, during run time of the program you can assign the standard texts to smart form.
5. Here my question is how to assign the standard texts to template texts dynamically ?
Please revert me your suggessions.
Thanks for your support.

Hi Indra neel ,
You are maintaining all the standard texts in custom table right, u need to get standard text based on condition which works for your smartform
than create text module in smartforms and change that to include text and give the variable name or internal tbale with field name in that text name fields and press (>) button and give the remaining fields in that than that will work dynamically

Smart form-table header-box

Moved to correct forum by moderator
Hello All,
in my smartform iam displaying the data by looping a table. i ahve put a header inside loop.
and for each new sales order , ia m going explicitly to new page, and when more number of items are there, that can fit in one page, then the smartform implicitly going to new page.
my problem is, when smart form implicitly going to new page, the MAIN WINDOW is not called, so my header is not displayed. iam displaying this header using a template.
the other windows, like date etc...are displayed, even if it goes to new page implicitly.
is there any way i can show the header (in template), in page that called implicitely.
Thanks in advance
Best Regards,
Amarender Reddy B
Edited by: Matt on Dec 17, 2008 9:59 AM

>
Amarender Reddy Busireddy wrote:
> Hello chenna
> thanks for your answer
> can you let em know, how to check that, i am getting that check box in display mode, even if enter the smart form in change mode.
> i tried many ways but i could not make that check box editable
Thats because your table is not in the MAIN window I suppose. Keep your table in the MAIN window of the smartform and then Chenna's solution would work fine.
Vishwa.

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

How to find the program name of the smart form?

How to find the program name of the smart form if output type is not known?
thanks in advance...

How to find the program name of the smart form if output type is not known?
thanks in advance...
T-code SE16
Enter table name: TNAPR -> Press enter key
Enter smartform name in input field(SFORM): Z_your_smartform_name
Execute
you can find program name under the column PGNAM/Program name.
Regards
sudheer

Driver program for the Smart form

Hi all.
I have an issue in smart forms.
we are implementing RE(Real Estate) module with the version ECC 6.0.
In the RE ,for printing the forms.I know the name of the SMART form only.
how can i know the corresponding Driver program.
Plaese help me to solve this issue.
Thanks on advance,
Regards,
Eswar

Hi,
You can get your driver program name from tnapr table but some are also configured from others way also.
Try this will work in any case.
Open your Smartform then execute.
Then function module name is displayed
Open function module and put a break point on first executable statement.
May be break point on statement like
CLEAR DOCUMENT_OUTPUT_INFO.
After giving breakpoint trigger your Smartform for printing in fresh session then it will stop in debug mode then in call tab you can see your driver program name.

Problem in multiple printing in the Smart Forms

Hi Experts,
From the driver program I am passing Internal table with multiple records for employee,
But the smart forms is printing only single form for the employee.
Could you please suggest what need to be done in order to print multiple forms for employee.
Regards,
IFF

IF sy-tabix EQ 1 .------>only for first loop it will give dialog box
      CALL FUNCTION fm_name
        EXPORTING
          user_settings      = 'X'
          vbeln              = it_vbeln-vbeln
          pdf                = r2
          rbiclear           = c3
        IMPORTING
          job_output_options = job_out
          einv               = einv.
    ELSE.
           c_par-no_dialog = 'X'.----
> if u set this then u will not get dialog box again and again
       out_opt-tdnoprev = 'X'.
        out_opt-tddest = job_out-tddest.
        out_opt-tdprinter = job_out-tdprinter.
      CALL FUNCTION fm_name
        EXPORTING
          control_parameters = c_par
          output_options     = out_opt
          user_settings      = space
          vbeln              = it_vbeln-vbeln
          pdf                = r2
          rbiclear           = c3
        IMPORTING
          job_output_options = job_out
          einv               = einv.
    ENDIF.

Search for texts and logos in smart forms

Hi there,
Does anyone know if there is a function module that can search for specific texts and logos in smart forms?
Any response would be really appreciated.
Thanks
HW

Hi
I really doubt if there is any FM like that. But, you can always search the existing logos in the Appln Server, the tcode is SE78.
Regards,
Vishwa.

How to get the PO no in the smart form and in the print program from ME23N

hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.

Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

Where the smart forms stored in Package

Hi,
Where the Smart forms are stored in package,
In package only following option is there,
1.Dictionary Object.
2.Programs,
3.Includes,
4.Transactions,
5.Message class.

Hi Udaya,
When you activate a smartform a function module is generated, so smartform is nothing but a function module.Once your smartform is activated, run it check the function module name.When you activate a smartform it generates a function module in a function group the name of both will be same.
Go to SE80 select function group and give the name of function module since both are same.You will be able to view your smartform.
regards,
Nikhil Moghe

How to display the text as a Bold in the Text Element of a Smart Form

Hi,
I created one Smart Form.
In that i created the Text element.
I provide some data also in that.
It is coming as a MS WORD.
I executed my smart form.
Customer Number: &WA_KNA1-KUNNR&
it display the data of the particular customer.
But i need to display the Customer Number as BOLD or else Increase the Size.
For this also I created one SMARTSTYLE.
In that I created the Paragraph and Character Formats also.
Now i assignee that SMARTSTYLE in the Output Option Tab of the Text Element also.
But i unable to get the CUSTOMER NUMBER in Bold.
In MS WORD we have BOLD button.
I selected the Text and Press the BOLD button. At that time it is Highlighted.
Whenever i press the SAVE Button.
Then it is not saved with BOLD.
It is coming in Normal Format.
In the ECC 6.0. I am unable to get the Text as a BOLD.
This text Element is like a MS WORD.
Can you please tell me how to display the Data with BOLD. please tell me. I am unable to get that one.
Thank You.
Regards,
B. Krishna.

Hi,
Check where u have given BOLD. In character Format or in Paragraph format.
In SMART FORM,
1. Change to OLD EDITOR if u are confused with the new one.
        (This can be done by clicking the button left to new editor ).
2. If it is PARAGRAPH FORMAT,
           Give the name of paragraph format in the editor.
            P1         &WA_KNA1-KUNNR&
    If it is CHARACTER FORMAT,
                         <C1> &WA_KNA1-KUNNR&
Thanks,
Nithya.

Can we reduce the SIZE of the text in TEXT Module?..Smart form

Hello,
Can we reduce the size of the TEXT module in Smart form.
As the text that I am putting in the Text Module is taking more space and it is displaying in the next page.
What are the steps that I can take to display the text in the same page.
Regards,
Kittu

Hi,
you can do these by two ways,
1-> By reducing the font size
2-> reducing the line spacing
both can be adjust in Smart Style what you are using.
If you not using any style for this, default style will take.
Bye

Text inversed in the smart form table

Similar Messages

Maybe you are looking for