Problem in multiple printing in the Smart Forms

Hi Experts,
From the driver program I am passing Internal table with multiple records for employee,
But the smart forms is printing only single form for the employee.
Could you please suggest what need to be done in order to print multiple forms for employee.
Regards,
IFF

IF sy-tabix EQ 1 .------>only for first loop it will give dialog box
      CALL FUNCTION fm_name
        EXPORTING
          user_settings      = 'X'
          vbeln              = it_vbeln-vbeln
          pdf                = r2
          rbiclear           = c3
        IMPORTING
          job_output_options = job_out
          einv               = einv.
    ELSE.
           c_par-no_dialog = 'X'.----
> if u set this then u will not get dialog box again and again
       out_opt-tdnoprev = 'X'.
        out_opt-tddest = job_out-tddest.
        out_opt-tdprinter = job_out-tdprinter.
      CALL FUNCTION fm_name
        EXPORTING
          control_parameters = c_par
          output_options     = out_opt
          user_settings      = space
          vbeln              = it_vbeln-vbeln
          pdf                = r2
          rbiclear           = c3
        IMPORTING
          job_output_options = job_out
          einv               = einv.
    ENDIF.

Similar Messages

How to get the PO no in the smart form and in the print program from ME23N

hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.

Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa

Print Multiples copies of the same form.

Post Author: Morovis
CA Forum: General
Can I print a multiples copies of the same form using a counter. For example I like to print 200 copies and I have a variable or running toatl that can be incremeted by 1 trought the copies.

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

How to use Multiple Logos in One Smart Form?

All,
I have a client where they will have 2 logos for, e.g. "Invoicing" and want the form to decide which logo to print (based on plant code).
We are using Smartforms.
They want to use one form and based on the plant code - the form should determine which logo to print in the upper left corner of the invoice - how do you do this?
This is not like having text to print on the form in the same place - my understanding is the logo is NOT some variable you can "clear" in the program and then use the logo you wish to show up on the printout.
Does this have something to do with using multiple layouts within the same form? You define a layout for each logo and then within the Smartform logic determine which layout to print? And if that is true - does someone have sample code of how they determined which layout to use?
Thanks - and as always - points rewarded where helpfull!
Scott

Hi Scott,
Create two Graphics in Smartform window & place them wherver you want in the smart form.
Now in Graphics node, you can find 'Conditions' tab, under this you can give the conditions.
Hope this clue wil help you
Regards,
Sujatha

Use of NACE after creating print program n smart form

Wat's d purpose of NACE?I hav created my own print program n smart form according to my own requirement.If NACE is necessary 4 my smart from.How can i use NACE i mean navigation steps.
Please help me out.Its urgent.
Thanks & Regards,
Santhosh.

Hi Santhosh,
Nace is for message control settings. Say if u want to trigger a Smartform or an Idoc or any other customized program u can do the message control settings.
Say at the time of Sales Order creation or updation u want to trigger a Smartform, then u have to follow the following steps:
Goto NACE
Select application V1 and then click Output Type.
create a new Output type or copy the existing one abd save it with new name
then in Processing Routine Mention the driver program name and in Form routine mention the main subroutine name.
In Smartform mention your SMartform name and also the layout if u have ceated.
Again go to NACE and Select application V1 and press Procedures.
here out of the many procedures u have to select the right one and attach your Output Type to it.
You can also create a condition record..Say if u want to trigger this Smartforms for Sales Order of particular type.
Hope this helps.
Reward Points if useful.
Thanks.

Print preview of smart form

Hi all,
how to view the print preview of a smart form and how to debug the smart form
Thank You

SMARTFORM-> execute->execute->pass values if require to import & table parameters ->execute-> on the pop up window give Printer name as LP01 and press print preview.
For debussing -
1. write BREAK POINT in the code window.
2. Put a break point on the call function in the driver program
3. put a brak point in the generated Function module.
Refer this link too -
Re: smartforms
Regards,
Amit

How to print bullet in smart form

Hi Experts,
I have a requirement in smart form where different points of texts should come under a bullet.
Can you please tell me how to print bullet in smart form.
Note : I have to use Standard text
Thanks in advance
Bikas

hi
good
We can create bullets in smartforms.
For this change the editor to text editor and then
goto insert->characters->SAP Symbols and select the
symbol you want.
This may help your requirement.
You cannot see the bullets in print preview, it'll
appear only on a hard copy.
reward point if helpful.
thanks
mrutyun^

For this program i could send the smart form thru mail but in the inbox ..

*& Report ZSFOO
REPORT ZSFOO.
*& Report ZSFINV
TABLES : KNA1,         " General Data In Customer Master
         KNB1,         " Customer Master(Company Code)
         BSID,         " Accounting: Secondary Index for Customers
         ZSMARTFORM,   " Custom table for Storing Bank Details
         zsf_exp_inv, " Structure that stores required fields from all tables used
         KNVK.         " Customer Master Contact Partner
data : Begin of it_struct occurs 0.
        include structure zsf_exp_inv01.
data : End of it_struct.
types : begin of ty_bsid,
        kunnr like bsid-kunnr,
        WAERS like bsid-WAERS,
        XBLNR LIKE BSID-XBLNR,
        BUDAT LIKE BSID-BUDAT,
        WRBTR LIKE BSID-WRBTR,
        BUKRS LIKE BSID-BUKRS,
        end of ty_bsid.
types : begin of ty_kna1,
        kunnr like kna1-kunnr,
        NAME1 LIKE KNA1-NAME1,
        STRAS LIKE KNA1-STRAS,
        MCOD3 LIKE KNA1-MCOD3,
        LAND1 LIKE KNA1-LAND1,
        SORTL LIKE KNA1-SORTL,
        end of ty_kna1.
types : begin of ty_knb1,
        kunnr like knb1-kunnr,
        ZTERM LIKE KNB1-ZTERM,
        end of ty_knb1.
types : begin of ty_knVK,
        kunnr like kNVK-kunnr,
        NAME1 LIKE KNVK-NAME1,
        end of ty_knVK.
types : begin of ty_ZSMARTFORM,
        SNO      LIKE ZSMARTFORM-SNO,
        CURRENCY LIKE zsmartform-currency,
        BANKNAME LIKE zsmartform-bankname,
        ADDRESS1 LIKE ZSMARTFORM-ADDRESS1,
        ADDRESS2 LIKE ZSMARTFORM-ADDRESS2,
        ADDRESS3 LIKE ZSMARTFORM-ADDRESS3,
        ADDRESS4 LIKE ZSMARTFORM-ADDRESS4,
        ADDRESS5 LIKE ZSMARTFORM-ADDRESS5,
        ADDRESS6 LIKE ZSMARTFORM-ADDRESS6,
        VALIDFROM LIKE ZSMARTFORM-VALIDFROM,
        VALIDTO   LIKE ZSMARTFORM-VALIDTO,
        end of ty_ZSMARTFORM.
data : it_bsid type table of ty_bsid,
       it_kna1 type table of ty_kna1,
       it_knb1 type table of ty_knb1,
       it_zsmartform type table of ty_zsmartform,
       it_knVK type table of ty_kNVK.
data : wa_bsid like line of it_bsid,
       wa_kna1 like line of it_kna1,
       wa_knb1 like line of it_knb1,
       wa_zsmartform like line of it_zsmartform,
       wa_knVK like line of it_knVK.
*****************Selection Screen**********************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR,
                 S_belnr FOR BSID-belnr,
                 S_BUKRS FOR BSID-BUKRS,
                 S_CURR FOR ZSMARTFORM-CURRENCY.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF IT_PARAM OCCURS 0.
        INCLUDE STRUCTURE ZPARAMETERS.
DATA : END OF IT_PARAM.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
SKIP 1.
Parameters : OPTION1 AS CHECKBOX,
             P_POINF(300) type c,
             OPTION2 AS CHECKBOX,
             P_DESC(300) TYPE C,
             OPTION3 AS CHECKBOX,
             P_MONTH(200) TYPE C,
             OPTION4 AS CHECKBOX,
             P_RATE(100) TYPE C.
SELECTION-SCREEN END OF BLOCK B2.
**********************PARAMETERS***********************************
data : l type i,
        Y(300) type c,
        j type i,
        k type i value 1,
        s type i,
        m(300) type c,
        p type i,
        z type i.
data : l1 type i,
        Y1(300) type c,
        j1 type i,
        k1 type i value 1,
        s1 type i,
        m1(300) type c,
        p1 type i,
        z1 type i.
data : l2 type i,
        Y2(300) type c,
        j2 type i,
        k2 type i value 1,
        s2 type i,
        m2(300) type c,
        p2 type i,
        z2 type i.
data : l3 type i,
        Y3(300) type c,
        j3 type i,
        k3 type i value 1,
        s3 type i,
        m3(300) type c,
        p3 type i,
        z3 type i.
IF OPTION1 = 'X'.
concatenate P_POINF ',' into P_POINF.
l = strlen( P_POINF ).
do l times.
    Y = P_POINF+j(k).
    case Y.
      when ','.
        m = P_POINF+s(z).
        s = j + 1.
        z = -1.
        p = p + 1.
        if p = 1.
          IT_PARAM-LINE1 = m.
        endif.
        if p = 2.
          IT_PARAM-LINE2 = m.
        endif.
        if p = 3.
          IT_PARAM-LINE3 = m.
        endif.
     when '.'.
        if p = 4.
          IT_PARAM-LINE4 = m.
        endif.
    endcase.
    j = j + 1.
    z = z + 1.
enddo.
ENDIF.
IF OPTION2 = 'X'.
concatenate P_DESC ',' into P_DESC.
l1 = strlen( P_DESC ).
do l1 times.
    Y1 = P_DESC+j1(k1).
    case Y1.
      when ','.
        m1 = P_DESC+s1(z1).
        s1 = j1 + 1.
        z1 = -1.
        p1 = p1 + 1.
        if p1 = 1.
          IT_PARAM-LINE5 = m1.
        endif.
        if p1 = 2.
          IT_PARAM-LINE6 = m1.
        endif.
        if p1 = 3.
          IT_PARAM-LINE7 = m1.
        endif.
     when '.'.
        if p1 = 4.
          IT_PARAM-LINE8 = m1.
        endif.
    endcase.
    j1 = j1 + 1.
    z1 = z1 + 1.
enddo.
ENDIF.
IF OPTION3 = 'X'.
concatenate P_MONTH ',' into P_MONTH.
l2 = strlen( P_MONTH ).
do l2 times.
    Y2 = P_MONTH+j2(k2).
    case Y2.
      when ','.
        m2 = P_MONTH+s2(z2).
        s2 = j2 + 1.
        z2 = -1.
        p2 = p2 + 1.
        if p2 = 1.
          IT_PARAM-LINE9 = m2.
        endif.
        if p2 = 2.
          IT_PARAM-LINE10 = m2.
        endif.
        if p2 = 3.
          IT_PARAM-LINE11 = m2.
        endif.
     when '.'.
        if p2 = 4.
          IT_PARAM-LINe12 = m2.
        endif.
    endcase.
    j2 = j2 + 1.
    z2 = z2 + 1.
enddo.
ENDIF.
IF OPTION4 = 'X'.
concatenate P_RATE ',' into P_RATE.
l3 = strlen( P_RATE ).
do l3 times.
    Y3 = P_RATE+j3(k3).
    case Y3.
      when ','.
        m3 = P_RATE+s3(z3).
        s3 = j3 + 1.
        z3 = -1.
        p3 = p3 + 1.
        if p3 = 1.
          IT_PARAM-LINE13 = m3.
        endif.
        if p3 = 2.
          IT_PARAM-LINE14 = m3.
        endif.
        if p3 = 3.
          IT_PARAM-LINE15 = m3.
        endif.
        if p3 = 4.
          IT_PARAM-LINe16 = m3.
        endif.
    endcase.
    j3 = j3 + 1.
    z3 = z3 + 1.
enddo.
ENDIF.
APPEND IT_PARAM.
select * from kna1 into corresponding fields of table it_kna1 where kunnr in s_kunnr.
select * from knb1 into corresponding fields of table it_knb1 for all entries in it_kna1 where kunnr = it_kna1-kunnr.
select * from bsid into corresponding fields of table it_bsid for all entries in it_kna1 where kunnr = it_kna1-kunnr and belnr in s_belnr and bukrs in s_bukrs..
SELECT * FROM KNVK INTO CORRESPONDING FIELDS OF TABLE IT_KNVK FOR ALL ENTRIES IN IT_KNA1 WHERE KUNNR = IT_KNA1-KUNNR.
select * from zsmartform into corresponding fields of table it_zsmartform .
DATA : AMT LIKE SPELL.
loop at it_bsid into wa_bsid.
read table it_kna1 into wa_kna1 with key kunnr = wa_bsid-kunnr.
read table it_knb1 into wa_knb1 with key kunnr = wa_bsid-kunnr.
read table it_zsmartform into wa_zsmartform with key CURRENCY = wa_bsid-WAERS.
READ TABLE IT_KNVK INTO WA_KNVK WITH KEY KUNNR = WA_BSID-KUNNR.
it_struct-name1 = wa_kna1-name1.
it_struct-stras = wa_kna1-stras.
it_struct-mcod3 = wa_kna1-mcod3.
it_struct-land1 = wa_kna1-land1.
it_struct-sortl = wa_kna1-sortl.
it_struct-zterm = wa_knb1-zterm.
it_struct-xblnr = wa_bsid-xblnr.
it_struct-currency = wa_zsmartform-currency.
it_struct-currency = wa_bsid-waers.
it_struct-budat = wa_bsid-budat.
it_struct-BANKNAME = wa_zsmartform-BANKNAME.
it_struct-ADDRESS1 = wa_zsmartform-ADDRESS1.
it_struct-ADDRESS2 = wa_zsmartform-ADDRESS2.
it_struct-ADDRESS3 = wa_zsmartform-ADDRESS3.
it_struct-ADDRESS4 = wa_zsmartform-ADDRESS4.
it_struct-ADDRESS5 = wa_zsmartform-ADDRESS5.
it_struct-ADDRESS6 = wa_zsmartform-ADDRESS6.
it_struct-CURR = WA_BSID-WRBTR.
IT_STRUCT-NAME = WA_KNVK-NAME1.
IT_STRUCT-AMOUNT = IT_SPELL-AMT.
append it_struct.
endloop.
data : x type i,
       x1 type i,
       a type string.
loop at it_struct.
x = strlen( it_struct-curr ).
x1 = x - 3.
a = it_struct-curr+0(x1).
CALL FUNCTION 'SPELL_AMOUNT'
      EXPORTING
        AMOUNT          = a
CURRENCY        = ' '
FILLER          = ' '
LANGUAGE        = SY-LANGU
      IMPORTING
        IN_WORDS        = AMT.
EXCEPTIONS
NOT_FOUND       = 1
TOO_LARGE       = 2
OTHERS          = 3
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
endloop.
DATA: ws_ucomm LIKE sy-ucomm.
DATA: form_name TYPE rs38l_fnam.
DATA: wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop.
data : i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
      i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: t_otfdata TYPE ssfcrescl,
t_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
      i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
data : wa_objhead TYPE soli_tab,
wa_doc_chng typE sodocchgi1,
      w_data TYPE sodocchgi1,
      wa_buffer TYPE string,
      v_len_in LIKE sood-objlen,
      v_len_out LIKE sood-objlen,
      v_len_outn TYPE i,
      v_lines_txt TYPE i,
      v_lines_bin TYPE i.
DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE string.
DATA: w_bin_filesize TYPE i.
wa_ctrlop-getotf = 'X'.
CALL FUNCTION '/1BCDWB/SF00000001'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_outopt
user_settings = 'X'
IN_WORDS = amt
importing
job_output_info = t_otfdata
TABLES
I_ZSF_EXP_INV = it_struct
I_ZPARAMETERS = it_param.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
bin_filesize = w_bin_filesize
CODEPAGE = ' '
filename = 'c:     est59.PDF'
filetype = 'BIN'
IMPORTING
filelength = w_filesize
TABLES
data_tab = t_pdf_tab
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10
IF sy-subrc <> 0.
*You should include message-id in the report heading
WRITE : sy-subrc.
ELSE.
WRITE : 'File Test.pdf downloaded succesfully'.
ENDIF.
loop at t_pdf_tab.
    translate t_pdf_tab using '~'.
    concatenate wa_buffer t_pdf_tab into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
    i_record = wa_buffer.
    append i_record.
    shift wa_buffer left by 255 places.
    if wa_buffer is initial.
      exit.
    endif.
enddo.
Attachment
refresh:
    i_reclist,
    i_objtxt,
    i_objbin,
    i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'O'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Hazard report-' p_load '.pdf' INTO i_objpack-obj_descr.
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-obj_descr = 'test'.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
     i_reclist-express = 'X'.
i_reclist-rec_type = 'U'.
append i_reclist.
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
         EXPORTING
              document_data              = wa_doc_chng
              COMMIT_WORK = 'X'
              put_in_outbox              = 'X'
         TABLES
              packing_list               = i_objpack
              object_header              = wa_objhead
              CONTENTS_BIN               = i_objbin
              contents_txt               = i_objtxt
              receivers                  = i_reclist
         EXCEPTIONS
              too_many_receivers         = 1
              document_not_sent          = 2
              document_type_not_exist    = 3
              operation_no_authorization = 4
              parameter_error            = 5
              x_error                    = 6
              enqueue_error              = 7
              others                     = 8.
for this program i could send the smart form thru mail but in the inbox i could not
download it it says needed to be decoded properly.file not starting with pdf....
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ELSE.
     CALL FUNCTION 'POPUP_TO_INFORM'
       EXPORTING
         titel = 'Mail sent'(003)
         txt1 = 'The report is sent via e-mail.'(004)
         txt2 = ' '.
     LEAVE PROGRAM.
   ENDIF.

hi krishna,
u r right. there is no error in sending the mail and the file but the problem is that file created and converted to pdf is not done properly.jst verify whether the file is created properly or not .thats the only problem that can occurs else ur program is absolutely right.

Print Output in Smart forms

Hi,
There is a Strange issue I am facing now that is print output is getting changed according to the printer settings.
Even though I specified the output_options-tdprinter = 'ZPDFUC',and output_options-tddest = 'LP01' while calling smart form FM the printer option always takes the printer setting present in user profile.
Is there a solution where the smart form by default picks one printer but not in the User profile settings.
Regards,
Deepa

Hi,
There is a field check it and set the value X to overwrite the system details with manual settings. when calling the smartforms.
Thanks,
Vinayaka

How to Printe Graphics in Smart-Forms

Guys,
Need your help
Is it possible to print graph in smart form???
If yes, if you have any document, please pass it to me
Dhiraj

Hi Ram,
Go through this hope u can understand.
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1.   First save the file as BMP
2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
      make it Zoom as 100% and save as *.TIFF
3.   Open SE38 and execute program RSTXLDMC
4.   Give your TIFF file path name
5.   Select Bcol (for Color)
6.   TEXT ID will be ZHEX-MACRO-*.
7.   Inplace of * write your own logo name (ZCOMPANYLOGO)
8.   Execute the program
9.   Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
or
In 4.6x :-
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
     the graphics to be.
/:   INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
Reward points if help ful.
http://www.sap-img.com/ts001.htm
Sorry i think for Scripts ..
better to go for above post . it definetly works
Thanks
Naveen khan
Message was edited by:
        Pattan Naveen

Driver program for the Smart form

Hi all.
I have an issue in smart forms.
we are implementing RE(Real Estate) module with the version ECC 6.0.
In the RE ,for printing the forms.I know the name of the SMART form only.
how can i know the corresponding Driver program.
Plaese help me to solve this issue.
Thanks on advance,
Regards,
Eswar

Hi,
You can get your driver program name from tnapr table but some are also configured from others way also.
Try this will work in any case.
Open your Smartform then execute.
Then function module name is displayed
Open function module and put a break point on first executable statement.
May be break point on statement like
CLEAR DOCUMENT_OUTPUT_INFO.
After giving breakpoint trigger your Smartform for printing in fresh session then it will stop in debug mode then in call tab you can see your driver program name.

How to debug the smart forms

Hi All,
Can any body guide me how to debug the smart forms.
Thanks & Regards,
Satish.

Hi,
The the best way to debug the form is to put a breakpoint in the function module generated by the smartform.
Procedure:
Open the smartform we want to debug.
Goto Environment -> Function module name.
Open the function module in SE37. From the menu GOTO -> main program. Open the last include.
This incude contains the entire code ie the code we have written in initalization + form routines + program lines + sap generated code.
Even we can search for the text nodes, folders, templates, tables, graphics, address nodes etc with their names.
Put a breakpoint at any point you want.
If we issue any doc which triggers this form, when the control reaches the break point it will stop.
Please note that hard-coding the break points in the code ( Program lines ) is not recommended and it can´t be done unless if it is development server.
So, always put a session break point in the related function module.
We can use SFTRACE transaction to know the sequence of the control flow.
If you want to break at each and every text that is printed on the output form put the break points in the forms.
1. %write_text to break at text element.
2. %WRITE_TEXT_MODULE to break at text module.
3. %WRITE_INCLUDE_TEXT to break at include text.
Please put a break point at the first sy-subrc check.
If the control reaches this point, you can find the name of the element in the varible NAME and the content in the text node in %TEXT.
Its easy to understand the sequence of the printing if we put a breakpoint as stated above.
Regards,
Satish.

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

How to find the program name of the smart form?

How to find the program name of the smart form if output type is not known?
thanks in advance...

How to find the program name of the smart form if output type is not known?
thanks in advance...
T-code SE16
Enter table name: TNAPR -> Press enter key
Enter smartform name in input field(SFORM): Z_your_smartform_name
Execute
you can find program name under the column PGNAM/Program name.
Regards
sudheer

Where the smart forms stored in Package

Hi,
Where the Smart forms are stored in package,
In package only following option is there,
1.Dictionary Object.
2.Programs,
3.Includes,
4.Transactions,
5.Message class.

Hi Udaya,
When you activate a smartform a function module is generated, so smartform is nothing but a function module.Once your smartform is activated, run it check the function module name.When you activate a smartform it generates a function module in a function group the name of both will be same.
Go to SE80 select function group and give the name of function module since both are same.You will be able to view your smartform.
regards,
Nikhil Moghe

Problem in multiple printing in the Smart Forms

Similar Messages

Maybe you are looking for