Text messaging time stamp issue for incoming on Treo Pro

smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

I have a pro and I reluctlantly edited my registry on my phone. I've never done that and realizing what a big issue it has been "work aound it" I thought i'd troubleshoot myself.
First I downloaded PHM Registry Editor and synced it to my phone. I suppose you could click on the link within your phones website too...
http://handheld.softpedia.com/get/System-Utilities/Registry/PHM-Registry-Editor-8393.shtml
Once it was installed, I found the program in the program file and clicked on it the
I then followed the instructions below and everything worked fine...
[HKEY_LOCAL_MACHINE\Software\OEM\SMS]
"RecvTimeStamp"=dword:00000001
Hope this helps...

Similar Messages

Text message time stamp while phone is off

Does anyone know how to find out when a text message was actually sent by the person who sent it to you? I turn my phone off at night and sometimes for short periods during the day and when I turn it on I get several text messages at once. However it says that they were sent/received at the time I turned on my phone which I know isn't the case. On my old phone, the lg dare, it would say when the person actually sent it along with when I received it even if my phone was off. Its not a huge deal but it would be nice to know so I know if they have been waiting for a response for a while. Thanks!!

Hey there techfan14! If I understand correctly, you would like to know when messages are sent to your phone (esp. when the phone is off). I can tell you that the time and date that a message was sent to your phone is not available to Verizon Wireless customers. We can show you when the message is delivered, whether the phone is on or off. That is available through My Verizon online under usage details. Thanks for bringing your question to the VZW Community!

LG Octane Camera Date/Time Stamp Issues

The pics I take with my LG Octane are designated a number associated with the date/time the pic was taken (ex 0401121345, would be April 1, 2012 at 145pm). When I transfer the pics from my phones memory card to my computer and open the pics, I can see the pics info (date/time) and everything seems correct.
The problem comes in when I load my pics onto a website that verifies the pics date/time thru the digital encoding on the pics file. (Digital Pics are encoded with date/time stamps that can be recognized with computer software). This website rejects my submitted pics from my LG Octane because this encoding is either not there or not set correctly. I had no issue previously when using my Samsung env last year. Please Help!

I take it you are noticing that the photo shows in your gallery with the correct time for the name. But, when you look at the photos on your computer it is showing a time so many hours off (ie. phone shows 12:00 and computer shows 4:00). What it is actually doing is time stamping it for GMT for some reason. This has been a problem for as long as I know. I have not found an answer and have come to believe there is not a way of changing the time/date stamp on the phone. I have not even found an app for it.
Sorry I don't have an answer. But, maybe some one else will.

Messages time stamps

Why is my messages time stamps are at least 10 minutes faster than my phone? Example, if my phone shows 8:00, and the message I received shows 8:10. Is it just me or?

This is very odd behavior and from what I can tell, not very desirable... how do we put in an official request for a change in this behavior?
Afterall, what benefit is there to inconsistently display the timestamp? It should at least be configurable.

Different G/L code at the time of issue for projects .

Dear all;
here there is requirement :
Say we are having three different WBS element .for a particular Material ,at the time of issue it should goes to different G/L Code.How to map this in SAP system .
I have configured in OBYC setting as below :
GBB
Valueation Modifier general Modifier valueation Class G/L account
1101 VBR 3000(Raw Mat) XYZ
Kindly give me some solut

Do you mean that every time you issue for a particular WBS element it should post to a differnt G/L account.
If thats you requirement then its not possible to post to a new G/L account every time when you are issuing a material.
The G/L account is determined based on the movement type, and creating new movement type every time to post into a G/L account is not feasible solution.
What you can do is post into a differnt cost object like a profit center or cost center to track down the costs by posting them at the time of Goods issue.
Thanks & Regards
Kishore

Time-stamp Table for delta extraction

Hi SDNers,
What are the BW Time-stamp Tables for delta extraction in Source System(R/3).
Thanks,
Satya

the tables involved are :
ROOSPRMS
ROOSPRMSC
ROOSPRMSF
in the second table (ROOSPRMSC) you'll find the timestamp
M.

HCM Process & Forms: Date & Time Stamp issue in Prev Comments Box

Hi
We implemented HCM Process and Forms and we are in EHP4. We need user name, date and time stamp in each step for audit purpose.
Form Process Example:
Step1: Manager -> Initiates a Form for employee pay/position changes (REQUEST)
Step2: 1-Up Manager -> Approves a Form for employee pay/position changes (APPROVE)
Step3: HR Admin -> Process a Form for employee pay/position changes (PROCESS)
Process Overview: HR Admin can open a form once all steps are completed and they want to see all 3 steps date & stamp here.
New Comments -> To enter user comments in each step. Used data type HRASR_CURRENT_NOTE
Previous Comments-> To display prev. step / user's comments including user name, date & time. Used data type HRASR_PREVIOUS_NOTES.
I tried all different property settings in the form. May be I am still missing some property settings here.
Issue: If user enters any comments in "New Comments" box then only date & time stamp is coming along with their comments in "Previous Comments" otherwise not showing anything, just blank in the Prev. Comments. I added some code in form script in case no data in "New Comments" then default a value ":" . It is working fine for first step but not working the same for other 2 steps.
Trying in different way:
Creating 3 text fields in a form just for display purpose and modifying each field (data set) with some text (combination of user name, system date and time) at each stage/step in a BADI.
Method: IF_HRASR00GEN_SERVICE~DO_OPERATIONS
Here it is updating correctly for first step/stage (REQUEST) and other 2 fields are not updating accordingly. I did debug for each step and updating the data set correctly but finally not dispalying the valuse in a form except first field.
Can someone please share your ideas or inputs.
Appreciate your time & help!
Thanks
Hari

Hi Sahir
Thank you for your reply.
As I explained in my post, user details with date & stamp are coming when user enters some comments otherwise it is blank., All users may not enter comments because it is not a "required".
HR is needed this for audit purpose, just at end of the process they need to see all user names, date & stamp in the form. Forget about comment boxes, Can't we make just simple text fields with user details for each step (all 3 stages)?
FYI:
Issue: If user enters any comments in "New Comments" box then only date & time stamp is coming along with their comments in "Previous Comments" otherwise not showing anything, just blank in the Prev. Comments. I added some code in form script in case no data in "New Comments" then default a value ":" . It is working fine for first step but not working the same for other 2 steps.
Appreciate your inputs !
Thanks
Hari

Is there a way to see the time of each text message, time it has been sent?

I'm trying to prove a point to someone. I sure you used to be able to see what time someone sent you text messages it used to appear under the message or something. why is is not there anymore?
Is there a way to put it back in in settings?
I really wanna know im trying to prove a point to someone

Hi Oiee,
Yes there is. When you're in the Messages app, swipe your finger across the screen towards the left and the time stamps will appear. When you let go, they go again.

Time stamp issue in odi

Hi,
In my interface I am using txt.file as source and target is oracle. Here I am facing problem with time stamp and below are the details provided.
Details: We are getting a flat file from the source in which we are getting one of the columns as time stamp (2013032710101010) and we need to populate it in a stage table column OPTOUT_DATE which is of type DATE.
We are facing issue in loading this TIMESTAMP data into DATE data type.
Km for this is,
Lkm file to sql,
Ikm sql incremental update,
ckm sql.
Can you please suggest us how to handle this.
Thx,
Sahadeva,
9986928587.

Ok thank you..
I have one more doubt this moment.
What it is means, In the Interface level of ODI we have staging are different from target. Here we have SUNOPSIS_MEMORY_ENGINE. Can you please tell what is the use of this in ODI.
1.     How this works internally?
2.     Can we use it as our target/Source as well?
4.     Is it possible to retain data in the memory for later use?
So if you explain me more brief about these three questions that would be very much better and also helpful for me. Because I am going to develop
one POC doc(Proof Of Concept) on this.
Thx,
Sahadeva.

File time stamp issue

First, I'm not sure where this post would go.
We have several Mac users and they are noticing a problem with file time stamps on our NetWare servers. They are an hour ahead. When looked at from the server's console or from a Windows box, the file time stamp is correct. This is causing some problems with our production software.

On 09/11/2011 22:26, isutton wrote:
> NW 6.5 with latest SP. Mac OS X (Leopard and Snow Leopard). AFP is the
> standard connection and yes this has only happened since DST change. I
> did reboot one of the servers and the issue was fixed. I would like to
> know what causes this though so that I can avoid rebooting servers.
We've seen this to and it seems AFPTCP.NLM doesn't notice the DST
change. The only fix I'm aware of it to unload and then reload
AFPTCP.NLM (or restart the server, which whilst brutal can sometimes be
cleaner).
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Format Time Stamp String for excel error

Hi all,
I am currently trying to format the time stamp from labview to excel, in an excel recognizable format. Ive attached a photo of that part of the vi. The time stamp is formated correctly when it leaves the format time stamp block and after it leaves the build array block, but when it is written to excel file it is formated in what looks like a standard format and excel does not recognize this as a time stamp.
Any ideas to fix the issue?
Thanks
Attachments:
Time stamp.PNG ‏7 KB

The Example Finder has a few ActiveX examples I think one uses Excel.
Also if you have the Report Generation Toolkit I think this is what you need
http://digital.ni.com/public.nsf/allkb/38D7104644E0F7A5862578B1001A86C5
It sets the cell format to be how you want. The default for a timestamp is "m/d/yyyy h:mm".
BUT I just think I have an easier solution. The problem is it correctly detects that this is a time stamp, but the cell format is incorrect. If we convince it that it is a string it will look right and I assume that's all that matters. So add a space to the front of your time, so have the format be " %Y-%m-%d %H:%M:%S" (notice the space) and I think it will look the way you want because Excel thinks it is a string.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Auto Date/Time stamp required for Numbers 3.1

I would like to automatically add a Date/Time stamp to the last column's cell, when a person's name is selected from the pop-up menu in Column C.
As a number of different people will be using the spreadsheet, I'd prefer not to have a keyboard short cut, as it can be easily overlooked.
I was wondering if it were possible to use a script to copy a cell's (column D) results, containing the 'NOW()' or 'TODAY()' function, and paste the results into the 2nd cell (Column E), allowing the last column's formula to reference the 2nd cell?
The formula in the last cell =if($C2="","",$E2) can then reference a static cell, rather than a live cell.
I know enough to be dangerous, so I'm not sure if i'm heading in the right direction.
Thanking you all in advance.

Hi Gordon,
Is this the same as a script?
Good question! It's fun to see people try to define what a service is. It may be one of the least understood and appreciated features on the Mac. It was certainly a mystery to me not long ago.
I think of a service as anything that can be made to appear in the Services menu. Apple has made that easy with Automator. You fire up Automator, create a new service "workflow" document, plop in a script, save, and see the result immediately in the Services menu. You can also send the .workflow package to someone else, who only needs to double-click to install it.
This particular date-time service contains a short AppleScript (you can view it by opening the .workflow in Automator. But other languages (Python, Perl, etc) and Unix utilities can be used too, as illustrated here.
Since Numbers has decent support for AppleScript, it is quite easy for the non-technical user to "bolt on" menu choices to do quite sophisticated things that are not built into the interface itself. I find it more accessible than (and just as powerful as) the VBA used for Excel macros. But that could be mostly a matter of familiarity. In any case, it adds a whole new dimension to Numbers.
SG

ITunes "Last Played" Time Stamp issues

I have a late 2011 Mac Mini running OS X 10.8.2 & iTunes 11.0 (163).
Ever since I did the last update to iTunes, the "Last Played" time stamp has not worked.
In the past, whenever a track finished playing, iTunes would place the time & date in the "Last Played" column. This no longer works.
I just came back from the local Apple Store, & one of the workers there suggested setting the iTunes Preferences supply the time stamp.
When I got home, I went through the preferences, but could not find anything for the "Last Played" time stamp.
Please help.

Go into iTunes Preferences and turn off crossfade. Don't ask why it works; do ask apple to fix this bug!

Generic Data Source Delta on Time Stamp Issue

HI,
I had a Z datasource on a Z table with Time stamp
The Generic delta of the Data source is based on Time stamp with Upper Saftey Intreval 1Sec
When i extract delta consutively with 1 Hr gap i am getting an delta evn tough the table is updated with etries
How to investigate & resolve the issue
Thanks

Hi
please elaborate question is not clear.
Ashish

Date Time Stamping issue

When I use select xyz_Date from abc table in coldfusion
cfquery tag, the out put comes as follows:
CF5 - '05-MON-2007'
CF8 - '2008-01-27 00:00:00.0'
Note: The xyz_Date is stored without time stamp in the
database.
both running on 10.2.0.3 Oracle version. This is creating
problem when inserting dates when we only use xyz_date as a value
to be inserted. It worked fine on CF5 but not on CF8 due to format
change. Is there a way to set it to behave like CF5. It appears
that the later is using JDBC driver.

I assume that your oracle field is a date field and not
varchar. Also, your xyz_date is a date object. The most important
thing to remember is that the format does not matter.
This will work - #xyz_date# (no quotes)
cfqueryparam will also work and has some performance
advantages.

Text messaging time stamp issue for incoming on Treo Pro

Similar Messages

Maybe you are looking for