Text of Overall Transportation value

Hi Gurus,
Can anyone tell me where to find the Overall Transportation status Text. Table VTTK has a field STTRG. It has values 0-7 but i want to know the Description of the values .
where to find the descroption values.From which table?
Thanks in advance.
Regards,
Abhishek

You can find it in the Domain STTRG :
0     Planned
1     Planning completed
2     Check-in
3     Loading start
4     Loading end
5     Shipment completion
6     Shipment start
7     Shipment end
Patil

Similar Messages

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

Display of OVERALL RESULT value in any particult CELL in Workbook???

Hi,
is it possible to display the OVERALL RESULT value of a report in a particular cell in the workbook?
Here is the scenario: When i run a workbook, say the overall result is $1000. i want to display this value in cell D7 of the workbook.
is this possible using macros????
Thanks
Krishna

Thanks Mayanak.
I am running the workbook in this case and i dont see any "convert to formula" option when i right click. Is this a option in 7.0 or 3.5. we are in 3.5.
Krishna

Expected Value and Overall limit value usage.

Hi Sap Gurus,
if the frame work order we have these 2 field Expected value and overall limit field value to be filled,
and the system allows Invoice (or GR) up to the maximum of the overall limit value. and only if the value entered crosses the overall limit value the system issues a Error Message ( which is agreeable)
but the logical requirement is that, if the value crosses the Expected value limit the system should display a warning message, indicating that the value has crossed the expected value.
is there any config or note to be applied to get this funtionality.
Thanks and regards
Priya S

Hi,
Please refer to the Online documentation:
         Material Management
         -> External Services Management
            -> Procurement of Services: Processes
               -> Accelerated and Simplified Processes
                  -> Use of Value Limits (for Unplanned Services)
Inside this documentation, it is stated that there is a variety of
limits (combinations) to be used:-
- Overall limit only
- Overall limit and limit on services covered by contract item(s)
- Overall limit, limit on services covered by contract item(s),
- and other limit
- Overall limit and other limit
- Overall limit on services from model specifications or standard
    service catalog
- Expected value
The expected value is used in the update of the
PO item value and this is the value used in the release strategy.
Here is the f1 help:
Expected value - ESUH-COMMITMENT
Value that the unplanned services (or the materials) covered by this
item are not expected to exceed.
Use
If you are working with the release (approval) procedure for purchasing
documents, this value serves as the basis for a release strategy applied
to this document.
If you tick 'No limit',you don't need to enter 'Overall limit',but must
enter 'Expected value'.Because 'Expected value' will affect the release
strategy. Please read the note 440601 connected to this.
Concerning the variability of actual cost of a purchase order,
expected value means that the unplanned services (or materials)
covered by this item are not EXPECTED to exceed.
It is not mandatory that it has the same value like total limit value.
Expected value can exceed, it is used for comparison with total limit
value in cost control.
Expected value can also be combined with unlimited total limit in a
purchasing document.
Regards,
Edit

Populating Multirecord text fields from Tlists value's combinations

I have a UI wherein there are two T lists, one on the Left and other on the Right. The left one contains
From values and the Right one contains To values. There's one Button which when Pressed should populate
a Data Block which has multi record text fields just below the button with all the possible combinations of
the T lists elements. The Text fields have the values From, To, Time, Unit. When populated From and Two will
get the values from the combinations and the user will enter the values in other fields i.e. Time and Unit,
Then the user can save the Records.
e.g. If the Left T list contains Red, Blue and the Right T List contains Green, Black. Then on pressing
the button below the T lists, the text fields From and Two of a data block displayed in the same window
should get populated with all the possible combinations as:
From || To || Unit || Time
Red Green
Red Black
Blue Green
Blue Black
Now the user can enter the values for Unit as well as Time and when he does save the Records should be inserted
for the Data Blocks DML Source that's some table.
What I'm trying is:
On pressing the Button i'm writing code that will have Two PL/SQL Tables(Index by binary_integer). One will have
all the values of the left T List and the other with all the values of right T List.
I do it as in the WHEN BUTTON PRESSED as:
DECLARE
TYPE varchar_table IS TABLE OF VARCHAR2(30) INDEX BY BINARY_INTEGER;
from varchar_table;
to varchar_table;
v_count1 NUMBER;
v_count2 NUMBER;
v_count3 NUMBER;
v_count4 NUMBER;
BEGIN
v_count1 := Get_List_Element_Count('CONTROL.FROM_TYPE');
     FOR i IN 1..v_count1 LOOP
          from(i) := Get_List_Element_Value('CONTROL.FROM_TYPE', i);
     END LOOP;
v_count2 := Get_List_Element_Count('CONTROL.TO_TYPE');
     FOR i IN 1..v_count2 LOOP
          to(i) := Get_List_Element_Value('CONTROL.TO_TYPE', i);
     END LOOP;
END;
Now how will I populate the text fields with the values in the tables that i got with the piece of code above.
Any help would be appreciated. Any other method other than the one i'm trying is also welcome. Please note that
i'm not using any table to store the elements in the T Lists. The lists get values at runtime by
user's selection.
Thanks,
Abhishek.

Try and stay civil in your postings. The solotion should be to simply issue a GO_BLOCK, followed by a CREATE_RECORD followed by setting the approriate values :block.value = <value from list>

How to make a custom field as text as well as value fied in ad hoc query

hi,
i have created a custom infotype 9004 in which the custom field contain the code values, and the text of this code values are maintained in another ztable.
when i am viewing this infotype in Ad hoc query i am able to see this fields as only value fields and hence i am unable to get text for this field i.e when we right click on this field only the value option is enabled and the text option is disabled, both these options are enabled in some other standard fields like pernr(personnel no), persg(employee group),persk(employee subgroup).
can anybody suggest me how to enable both these options for custom fields.

Assign you table of text as a table text to the data element/domain of your custom field or thru external key on your infotype.
Query is able to analyse these links.
Regards.

MS SharePoint 2010 Designer Workflow Email - Enhanced Rich Text Field look-up values on HTML email have large spaces

MS InfoPath 2010 form with RTF (Rich Text Fields)
MS SharePoint 2010 Custom Library
MS SharePoint 2010 Designer Workflow Send Email
http://office.microsoft.com/en-us/sharepoint-designer-help/send-e-mail-in-a-workflow-HA010239042.aspx
https://www.nothingbutsharepoint.com/sites/eusp/pages/creating-html-emails-with-spd-workflows.aspx
Hi all of the above work, our question is how to control the RTF (Rich Text Field) look up values to the InfoPath 2010 form in the HTML email?
How to FORMAT the RTF look up value? in the HTML email
EXAMPLE
we have a InfoPath 2010 form published in the SharePoint 2010 custom list library there are 5 RTF fields (Notes1, Notes2, Notes3, Notes4, Notes5) there are other plain text fields, date fields, and other field types in the form
We use a HTML table to make the email look like the InfoPath form, so when the users fill out the form and they get the email notification everything looks the same.
Our problem is the EXTRA LINE SPACE in the RTF look up values
We want to remove any leading spaces, and line spaces between HTML table cells
Our Workflow has the HTML in a Workflow variable, as you know it does not support remote CSS it has to be in-line style for any formatting we want all cells to have
valign="top" the email should align at the top of the cell, all field types do except the RTF look up values they make the email look bad and they contain a lot of white space.
Please test this in your enviroment
<table>
<tr><td>Title:</td><td>[%Current Item:Title%]</td><td>[%Current Item:Notes1%]</td></tr>
<tr><td>Created by:</td><td>[%Current Item:CreatedBy%]</td><td>[%Current Item:Notes2%]</td></tr>
<tr><td>Date Created:</td><td>[%Current Item:Created%]</td><td>[%Current Item:Notes3%]</td></tr>
<tr><td>Modified by:</td><td>[%Current Item:ModifiedBy%]</td><td>[%Current Item:Notes4%]</td></tr>
<tr><td>Date Modified:</td><td>[%Current Item:Modified%]</td><td>[%Current Item:Notes5%]</td></tr>
</table>
I could not update the question below to the proper forum section. that is why i am asking again.
http://social.technet.microsoft.com/Forums/en-US/a7918bfb-9166-4bdb-828c-132a0c7611e3/ms-sharepoint-2010-designer-workflow-emails-huge-lines-paces-in-rich-text-fields-values-from-ms?forum=sharepointcustomization
-Isaack

Hi IssackB,
perhaps you may try this article:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f8fa2a11-9f74-4dd2-b277-21ce872fdcb2/can-we-add-rich-text-editor-to-the-sharepoint-designer-2010-workflow?forum=sharepointcustomizationprevious
there are some notes that perhaps you may check:
Use the same font for all the controls to ensure consistent spacing between rows.
Choose Size from the Format menu, and then choose To Fit from the menu that appears. This adjusts the size of each control, depending on the font set for the data that appears
in the control.
NOTE: The Print Preview and Output To commands use different algorithms for calculating text width; therefore, the text may occupy more or less
space in the RTF file.
Reduce the amount of blank space above and below the report controls. Any vertical
space between the controls is converted to whole lines
in the RTF file. For example, a
space of .02 inches can increase to .1667 inches in the
RTF file.
Make sure controls on the same output row are not too close to each other or overlapping. This can cause the Output To command to omit the controls or to align the columns incorrectly
in the RTF file.
Use the Align command from the Format menu to ensure that a row of controls is aligned properly on the report. If a row of controls is not aligned properly, the Output To command may place the controls
in different rows, causing extra blank
spacein the RTF file.
and please have a check there are updates for exchange 2013 and will be available with the upcoming release of CU4 for Exchange 2013, that stated the format rtf was saved instead HTML. http://support.microsoft.com/kb/2862739/en-us
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Using the text and not the value of a filed

Hi there,
I'm programming a pdf form using life cycle, I'm using the following script in a "SEND TO" button in order to email an XML file with the data extracted from the form:
var emailAddress = F.P1.Line.rawValue;
var veicle = F.P1.Vehicle.rawValue;
var shipper = F.P1.Shipper.rawValue;
var date = F.P1.Date.rawValue;
event.target.submitForm({cURL:"mailto:"+emailAddress+"?subject=Booking request from "+shipper+" date:"+date+" &body=Dear Sirs,Please find attached the completed PDF booking form for the following "+veicle+".",cSubmitAs:"XML",cCharset:"utf-8"});
The problem is that I would like to use in a variable the text and not the value of the F.P1.Line.raw field.
Thanks in advance

Hi,
This is not the appropriate forum to post this type of question. Please post all designer related queries in LiveCYcle Designer Forum to receive better response.
From you query I understand you have a dropdown box with name as "Line". And you want to the "text" part of the selected item and not the "value" part. If it is so then do the following -
1. Write the below code in onCHange event of your dropdown box.
var ddValue = this.boundItem(xfa.event.newText);
var nodeList = this.resolveNode("#items").nodes;
var ddText = null;
for (var i = 0; i < nodeList.length; i++)
if (this.boundItem(nodeList.item(i).value) == ddValue)
ddText = nodeList.item(i).value;
break;
global.selectedtxt = ddText;
In the above code I am basically getting the "text" part of the item selected and then I am storing it in a global variable.
2.
Write the below code on click event of your button -
var emailAddress = global.selectedtxt;
Hope this helps.
Thanks,
Shivajiv.

Copa - text of material classification values to copa

we will use copa for analysis.
we want to have some material classification values to pa. we have the ausp value at copa by using
kedr. but the problem is text of the classification values.
When i try to create a value field with referance to the data element ATWRT than i have the error length 00030 of the data element is too big.also i know that there is no chance to create ATRWT with 30 chac length.
when i create the value field without value maintanance then the text of the classification not comes to pa.
At last i have created the value field as with own value maintanence and double the charecteristic names and text from kes1.
But this solution is not suitable.
Is there a way to take this text from cawnt table?

we will use copa for analysis.
we want to have some material classification values to pa. we have the ausp value at copa by using
kedr. but the problem is text of the classification values.
When i try to create a value field with referance to the data element ATWRT than i have the error length 00030 of the data element is too big.also i know that there is no chance to create ATRWT with 30 chac length.
when i create the value field without value maintanance then the text of the classification not comes to pa.
At last i have created the value field as with own value maintanence and double the charecteristic names and text from kes1.
But this solution is not suitable.
Is there a way to take this text from cawnt table?

How to Add Transport Value in TAX CODE

Hi Experts
I define the code BED 8 %, Ecess 2 % HEC 1 % & VAT 4% but i want to add Transport value in that TAX CODE.SO could you tell me How to define the Transport Value in these Tax Code.
Regards
Amol

Hi Amol ,
Pls make the tax code accordingly
As per your querry
There are two options in the row level activate the Freight 1 Freight tax , frieght total
say suppose
item is X, unit price 100 quantity is 10 then total is 1000 and tax code is BED 16 ecess 1 cess 2 and cst 4% so your total is 1211.39 and if transport charges is 20 and the tax code is same.
Do make the new Tax Code change in the formula base amt which is your freight amount
Hope this helps
Ashish Gupte

In fact it's about mac:excel, how convert in a cell a number written in text format into a value?

in fact it's about mac:excel8 or 11 in OSX10.7.4,
how convert in a cell a number written in text format into its value?
cheers francois

Hi francois,
If I copyone of them and do a past special/value, it does not work.
Try just Paste instead of Paste Special > Value
I know your question is about Excel, but this works in Numbers:
Copy 1 234 567 (with spaces) and Paste (not Paste Special) into a Cell in a Numbers Table. The result is 1234567 and it behaves as a number. A formula will consider it to be a number:
You asked Wayne: what do you mean by "to reference a cell" ??
The reference is from Cell A2 to Cell A1 through a formula, such as: =A1+1
Regards,
Ian.

Formula behind fuzzy lookup Overall Similarity value

Could someone help me in understanding how Fuzzy Lookup calculates the Overall Similarity value using the available fuzzy columns and how top n records are chosen? Is it based upon the similarity value ?
Sowjanya Addanki

This is a good white paper on Fuzzy lookup and explains most of internals on it
http://msdn.microsoft.com/en-us/library/ms345128.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Why different Overall requirements value between labor and pool capacity

Hi all,
I create a PM Order with using a PP work center and this PP work has 3 Capacity category: machine, labor, pool.
after I check the PM Order with CM35
and i find out, that Overall requirements value are different between labor and pool capacity. Is this normal?
In my opinion,labor and pool should have same amount requirements of capacities.
thanks&regards

Hello,
Please refer the Link [http://help.sap.com/saphelp_47x200/helpdata/en/b1/c03662439a11d189410000e829fbbd/frameset.htm]
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Aug 17, 2010 9:42 AM

Problem with "Input text with List of Value"

Hi,
I have a table where i am storing country code using "Input text with List of Value". I want a another non base table item where i would like to show the "Country Name" of the select LOV. Kindly let know a way to implement the LOV where it returns the "Country code" to base table item and "Country name" to the non base table item.
thanks
Sanjay

Hi,
I am getting lazy in chasing down the JDeveloper release by the ADF Faces component mentioned.. So I ask: Which verson of JDeveloper are you on ?
Frank

Sorting options in javascript by text and not by value

Hi All,
I've an application in which on a jsp page has two html:select (listBox). Further 3 buttons are provided namely ADD,REMOVE and SAVE. On click of ADD the selected option from listBox 1 is transferred from listBox 1 to listBox 2. On Click of REMOVE the selected option from listBox 2 is transferred from listBox 2 to listBox 1.
My problem starts from the next step. When an item is transferred from source to target listBox. The target listBox should be sorted alphabetically. Now in html:option values are IDs which are int and text is name which String. And the sort method is called upon array of options, which sorts according to value and requirement is that it should sort by text.
Somebody please help me regarding this problem. Waiting for help.... Thanks in advance.

I have been working on a similar problem and have found that it depends on what kind of InfoProvider you are using.
If you are using an InfoCube, the setting that seems to control this is on the maintenance screen (Admin Workbench -> {InfoProvider to be edited} -> Change -> Extras -> Structur-Specific InfoObject Properties. If you want the key and text to display on the variables screen (which you already have), make sure the 'Display' is set to "Key and Text". If you want key and text to display on the filter screen, make sure the 'F4 Query' is set to "Values in Master Data Table". (You may also have to set the characteristic to display key and text in the query, but it sounds like you already have done this.)
For an ODS, the settings are the same, but the path to get there is different. Go to Admin Workbench -> {ODS to be edited} -> Change -> {InfoObject to be edited} -> Right-click -> ODS-object Specific Properties. Same settings as above after this.
For a MultiProvider, I found that the settings on the InfoObject itself seemed to control the display on the Web, so I ended up setting: Display = "Key and Text"; Query Def Filter Value Selection = "Values in Master Data Table"; and Query Exe Filter Value Selection = "Values in Master Data Table". That may be a bit of overkill, but I wanted to be sure to get both key and text in all situations.
I also found that the settings for navigational attributes (e.g., 0PLANT__0REGION) for any kind of InfoProvider must be set at the InfoObject level (e.g., 0REGION), as above.
Even with all of this, I still have a couple of InfoObjects left that I can't get to display both key and text for some unknown reason.
Hope this helps...
Bob

Text of Overall Transportation value

Similar Messages

Maybe you are looking for