TEXTEDIT Control in Dialog Programming

Hi,
My requirement is that when i save the long text once in the text editor, next time when i access that texteditor, i SHOULD NOT BE able to change the text which i entered, BUT I SHOULD ENTER THE NEW TEXT.
I am using the method:
 CALL METHOD EDITOR4->PROTECT_LINES
 EXPORTING
 FROM_LINE = 0
 PROTECT_MODE = EDITOR4->TRUE
 TO_LINE = V_LINES
 ENABLE_EDITING_PROTECTED_TEXT = EDITOR4->TRUE
 EXCEPTIONS
 ERROR_CNTL_CALL_METHOD = 1
 INVALID_PARAMETER = 2
 others = 3
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
I am able to disable the text which i entered earlier but not able add new text.
Pls suggest.
Thanks,
Ravi

any ways got the solution...
1) First Append a null row while saving.
Clear : Work area.
Append Work area To internal table.
2) While be in Change mode or view mode.
Get the total lines of table by DESCRIBE data... and do following
DESCRIBE TABLE IT_TEXT LINES V_LINES.
IF V_LINES <> 1.
 V_LINES = V_LINES - 1.
ENDIF.
CALL METHOD EDITOR_JUST->PROTECT_LINES
 EXPORTING
 FROM_LINE = 1
* PROTECT_MODE = TRUE
 TO_LINE = V_LINES
* ENABLE_EDITING_PROTECTED_TEXT = false
 EXCEPTIONS
 ERROR_CNTL_CALL_METHOD = 1
 INVALID_PARAMETER = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
and you are done..

Similar Messages

Using CheckBox / Radio-Button Control in Dialog Program

Dear Friends,
Please let me know the way to use check-box / radio-button control in dialog programs. Where & how to define them & write the logic.
If possible provide a small example.
Regards,
Alok.

Hi,
goto tcode abapdocu.. abap user dialogs - screens-processing screens you will get examples for all --pushbutt6ons radiobutton checkboxes everything
here is a sample code for you
PROGRAM demo_dynpro_check_radio .
DATA: radio1(1) TYPE c, radio2(1) TYPE c, radio3(1) TYPE c,
 field1(10) TYPE c, field2(10) TYPE c, field3(10) TYPE c,
 box TYPE c.
DATA: ok_code TYPE sy-ucomm,
 save_ok TYPE sy-ucomm.
CALL SCREEN 100.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
 WHEN 'RADIO'.
 IF radio1 = 'X'.
 field1 = 'Selected!'.
 CLEAR: field2, field3.
 ELSEIF radio2 = 'X'.
 field2 = 'Selected!'.
 CLEAR: field1, field3.
 ELSEIF radio3 = 'X'.
 field3 = 'Selected!'.
 CLEAR: field1, field2.
 ENDIF.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
flow logic:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE user_command_0100.
regards,
pankaj singh.

reward if helpful

How to use custom control in Dialog Programming?

How can I call a subscreen using custom control in Dialog Programming?
The required subscreen contains a calender. Any class or something available for this purpose. Please suggest.

As [vinraaj|http://forums.sdn.sap.com/profile.jspa?userID=3968041] wrote, call transaction SE51, there is a Wizard to help you generate the table control, it will create the table control and some includes with PBO/PAI modules > Read [Using the Table Control Wizard|http://help.sap.com/saphelp_bw/helpdata/en/6d/150d67da1011d3963800a0c94260a5/frameset.htm]
Also there is a tutorial in the wiki, read [Learn Making First Table Control |http://wiki.sdn.sap.com/wiki/display/ABAP/LearnMakingFirstTableControl] by [Krishna Chauhan|http://wiki.sdn.sap.com/wiki/display/~nc0euof]
Regards,
Raymond

Write the syntax for declaring table control in dialog programming?

1) Write the syntax for declaring table control in dialog programming?
2) Write the syntax to call a selection screen in a modal dialog box?

hi,
check this code for table control.
DIALOG PROGRAMMING
TABLE CONTROL
IN SE51
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITVBAK WITH CONTROL TABCTRL. ## TABLE CONTROL NAME
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
LOOP AT ITVBAK.
ENDLOOP.
IN PAI FLOW LOGIC
PROGRAM YMODULE_PR4 .
TABLES : KNA1, VBAK.
DATA : BEGIN OF ITVBAK OCCURS 0,
       VBELN LIKE VBAK-VBELN,
       ERDAT LIKE VBAK-ERDAT,
       ERNAM LIKE VBAK-ERNAM,
       NETWR LIKE VBAK-NETWR,
       END OF ITVBAK.
CONTROLS : TABCTRL TYPE TABLEVIEW USING SCREEN '0100'.
TO ACTIVATE SCROLL BAR
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN SPACE.
      SELECT VBELN ERDAT ERNAM NETWR
        FROM VBAK
        INTO TABLE ITVBAK
       WHERE KUNNR = KNA1-KUNNR.
      TABCTRL-LINES = SY-DBCNT.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT

How to move the selected rows from a table control in dialog programming

hiiiiiiii Every1
I have to update some fields for a slected row in table control on click of a button and save it in database.
Regards
Sachin Dhingra

see below example, I have added INSERT option after DELETE option, you can use same table or you can use differnt table by populating into that table and insert into the db table. If you want to use same internal table then use below code
LOOP AT itab INTO demo_conn WHERE mark = 'X'.
insert into table from itab.
ENDLOOP.
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA cols LIKE LINE OF flights-cols.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
TABLES demo_conn.
SELECT * FROM spfli INTO TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'TOGGLE'.
LOOP AT flights-cols INTO cols WHERE index GT 2.
IF cols-screen-input = '0'.
cols-screen-input = '1'.
ELSEIF cols-screen-input = '1'.
cols-screen-input = '0'.
ENDIF.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
WHEN 'SORT_UP'.
READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
IF sy-subrc = 0.
SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDIF.
WHEN 'SORT_DOWN'.
READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
IF sy-subrc = 0.
SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDIF.
WHEN 'DELETE'.
READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
IF sy-subrc = 0.
LOOP AT itab INTO demo_conn WHERE mark = 'X'.
DELETE itab.
ENDLOOP.
ENDIF.
WHEN 'INSERT'.
READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
IF sy-subrc = 0.
LOOP AT itab INTO demo_conn WHERE mark = 'X'.
itab1 = itab.
modify itab1.
ENDLOOP.
ENDIF.
if not itab1 is initial.
INSERT dbtab FROM TABLE itab1.
endif.
ENDCASE.
ENDMODULE.

Table control in dialog programming

why we are using loops in pbo and pai events?

Hi
First have to know the concept of Table control
The main purpose of table control is to display multiple records in a table like format.
so when to wants to display the multiple records, the internal table from which the table control has to be populated has to be kept in loop both in PAI and PBO.
see the doc
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
reward points if useful
regards
Anji

How to save the selected records from Table control in dialog programming

Hiiiiiiii Every1
Actually the problem is like this:-
I have to select some records from table control and then want to save the selected records in DB table.
Example
I have some rows having inforamtion bout employees...
Now what i want is that when i click on 'SAVE' button then these selected rows should be moved into DB table.
Sachin Dhingra

see below example, I have added INSERT option after DELETE option.
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA cols LIKE LINE OF flights-cols.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
TABLES demo_conn.
SELECT * FROM spfli INTO TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
        ENDIF.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
        ENDLOOP.
      ENDIF.
    WHEN 'INSERT'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          itab1 = itab.
          modify itab1.
        ENDLOOP.
      ENDIF.
      if not itab1 is initial.
        INSERT dbtab FROM TABLE itab1.
      endif.
ENDCASE.
ENDMODULE.

Strange issue with table control in dialog programming! Please help!

Hello everyone:
I have a table control on screen painter and I have atleast 10 rows on display when user calls the screen. If I have 15 columns then ofcourse user has to scroll down to see extra rows. I have line selection set to "single" for table control so that user can select only one row at a time. This works fine when user does not have to scroll to see extra rows. It is tough for me to explain i.e., if the table control displays 10 rows when the screen opens up then they can only select single row at a time (rows 1 -10). For example user selected row 7 and now they scroll down to see extra rows (for example 13) then it lets them select row 13 also even though I set line selection to "single" in the properties for table control! They should be able to select only one row at a time. Is this some limitation with table control in SAP? Please give me any information you have.
Thanks.
Mithun

Hi,
As you suspected, this is a limitation in the table control. You need to take care of the single-selection functionality yourself except for the rows that are actually being displayed. See [Note 588284|https://service.sap.com/sap/support/notes/588284] for the official SAP explanation.
Regards,
Jamie

Question on line selection in table control in dialog programming....

Hello,
I have a internal table displayed on a screen using Table control wizard. Now, when user selects a particular line and double clicks it, I want to write a query based on the line user selected. How can this be achieved ?
Regards,
Rajesh.

Assign a function code to F2 in your status and do the coding:
PROCESS PAI.
LOOP AT ITAB.
MODULE GET_CURSOR.
ENDLOOP.
MODULE USER_COMMAND.
MODULE GET_CURSOR.
GET CURSOR FIELD ws_field LINE ws_line.
ENDMODULE.
MODULE USER_COMMAND.
CASE OK_CODE.
WHEN 'PICK'.
WS_LINE = <TABLE CONTROL>-TOP_LINE + WS_LINE - 1.
READ TABLE ITAB INDEX WS_LINE.
---> Show details
ENDMODULE.

Dialog programming, data being washed out in TAB Control

Hi,
     i am working on dialog programming , in which i am using Table Control for user input (data is not coming from database table) . everything is going well till assignment of data to internal table but when
control goes to PBO by any means like pressing ENTER etc. then data being washed out.
PROCESS BEFORE OUTPUT.
MODULE TC_CONTROL.
LOOP AT it_data
         INTO wa_data
         WITH CONTROL tc_control
         CURSOR tc_control-current_line.
    MODULE tc_control_get_lines.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT IT_DATA.
    CHAIN.
      FIELD WA_DATA-FREPS_N.
      FIELD wa_data-TOEPS_N.
      FIELD wa_data-PRCH_A.
      FIELD wa_data-SRVC_AMT .
      FIELD wa_data-ACCNT_C.
      FIELD wa_data-AMT_D.
      FIELD wa_data-NARR_X.
      FIELD wa_data-CRPRD_N.
      MODULE tc_control_modify ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
*Abap program
MODULE TC_CONTROL OUTPUT.
DESCRIBE TABLE it_data LINES tc_control-lines.
ENDMODULE.                 " TC_CONTROL OUTPUT
CONTROLS: TC_CONTROL TYPE TABLEVIEW USING SCREEN 1000,
          TC_CONTROL1 TYPE TABLEVIEW USING SCREEN 1000.
DATA:     G_TC_CONTROLS_LINES LIKE SY-LOOPC,
          G_TC_CONTROLS_LINES1 LIKE SY-LOOPC.
*&      Module tc_control_get_lines OUTPUT
      text
MODULE tc_control_get_lines OUTPUT.
g_tc_controls_lines = sy-loopc.
move-corresponding it_data to wa_data.
ENDMODULE.                 " tc_control_get_lines OUTPUT
MODULE tc_control_modify INPUT.
move-corresponding wa_data to it_data.
MODIFY it_data
    FROM wa_data
    INDEX tc_control-current_line.
append it_data.
clear it_data.
ENDMODULE.                 " tc_control_modify INPUT
Please suggest me any clue.
Thanks in advance
vijay dwivedi

Hi ,
I have understood the problem.
In your ABAP code replace all the occurrrences of wa_data with the structurename.
Use the TABLES keyword to declare the structure .That structure will be same as
reference table of the table control .
Here the structure is SPFLI.
Check the bellow code , it will resolve the issue.
ABAP code - -
program zsdn.
tables spfli. " Declare the structure
data : it_data like table of spfli with header line,
*wa_data TYPE spfli, " commented
w_i type i.
*CONTROLS TC_CONTROL TYPE TABLEVIEW USING SCREEN 100.
controls: tc_control type tableview using screen 1000,
tc_control1 type tableview using screen 1000.
data: g_tc_controls_lines like sy-loopc,
g_tc_controls_lines1 like sy-loopc.
module tc_control output.
describe table it_data lines tc_control-lines.
endmodule. " TC_CONTROL OUTPUT
module tc_control_get_lines output.
g_tc_controls_lines = sy-loopc.
move-corresponding it_data to spfli.
endmodule. " tc_control_get_lines OUTPUT
module tc_control_modify input.
move-corresponding spfli to it_data.
modify it_data
from spfli
index tc_control-current_line.
append it_data.
clear it_data.
endmodule. " tc_control_modify INPUT
module status_0100 output.
set pf-status 'STAT'.
* SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_0100 OUTPUT
module user_command_0100 input.
case sy-ucomm.
    when 'BACK' or 'EXIT' or 'CANCEL'.
      leave to screen 0.
endcase.
endmodule.                 " USER_COMMAND_0100 INPUT
*&      Module POPLATE_TABLE OUTPUT
*       text
module poplate_table output.
if it_data is initial.
    select * from spfli into table it_data.
endif.
endmodule.                 " POPLATE_TABLE OUTPUT
Screen code (Scr no 1000) - -
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE poplate_table.
MODULE tc_control.
LOOP AT it_data WITH CONTROL tc_control CURSOR w_i.
    MODULE tc_control_get_lines.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0100.
LOOP AT it_data.
    MODULE tc_control_modify ON CHAIN-REQUEST.
*    ENDCHAIN.
ENDLOOP.
Regards
Pinaki

Dynamic header text in table control - Dialog programming

Hi All,
I have a table control on one of my dialog screens. I need to dynamically change the column header texts on this control in my PBO. Does anyone know how to do this? I have found all kinds of ways to modify the other characteristics of the fields at run time in the PBO (active, input/output, invisible, etc.) - but not to change the header text! Any help is appreciated.
thanks,
Matt

Hi Hymavathi,
I appreciate your help! This didn't solve the issue, however,...I have used the method you'd mentioned before (many times) for setting it inside the loop at screen:
%_<screenname>_%_APP_%-TEXT = <text something>.
- but only in ABAP reports. It doesn't seem to recogize it (the table control column header text) within a dialog program. I keep getting a compile error. (saying that the %_<screenname>_%_APP_%-TEXT doesn't exist.
I tried the suggestion that you stated below (from lateesh) - yet it only let me place i/o field in title text area (not the column header text). Am still searching...

Calling dialog program screen in custom control and using drag n drop

Hi Experts,
SCENARIO:
I have a custom container control. I want to insert a dialog program screen in custom container control in one half and tree nodes in the other half.
Now my dialog screen has a table control. I want that the user can drag n drop the nodes in the cells of my table control.
Please help.

I don't think drag n drop works in table control. You may need to change table control to ALV grid control.
a®

Long Text Box in a dialog program

Hi
I have a requirement to have a long text box ( which can typically hold 1000 characters ) on a dialog screen. I do not want to use table control .Is there any other way we can have a long text box .
Thank you
Krish

Check this standard program. saptextedit_demo_3
this will explain how to create and use the TextEdit Control
regards
Muthu

What is difference between report programming and dialog programming?

hi,
what is difference between report programming and dialog programming? plz provide some example code
bye

ABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/

How to set default values in dialog programming

hi gurus
can anyone suggest me
how to set default values in dialog programming
thanks&regards
kals.

it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
MODULE preRender OUTPUT.
DATA first_time TYPE flag VALUE 'X'.
IF first_time EQ 'X'.
* put your initialization code here
CLEAR first_time.
ENDIF.
ENDMODULE.
-MiR

TEXTEDIT Control in Dialog Programming

Similar Messages

Maybe you are looking for