TextInput box maximumLength does not allow to lose focus

Hello,
I have a textInput box with a maximumLength set to 4000. I want it to prevent the user to put any values past 4000 characters. It does stop the user right at 4000, however if there are 4000 characters in the box, the user cannot click out of the box to another field (e.g. another textInput box or an messageLovInput box).
If I delete one character from the box (3999) then I am able to go to another box.
Does anyone have any idea why this is happening?

Hi Frank,
I am using Jdev version 10.1.2
If I set the max value to 3999 in the application, upon entering 3999 characters it will not allow me to leave the box. I am able to click on the buttons on the page, but not any other text box or messageLovInput box on the screen. If I remove one character to make it 3998 then i am able to leave. Also, if the value is copied and pasted in with over 3999 characters, upon clicking out of the box it will reduce it to 3999 automatically and i am able to leave the box. it is only when i manually entering it in.
Thank you

Similar Messages

"save as" pop up box does not allow me to save the document.

Hello ,
"save as" pop up box does not allow me to save the document. Shows a blank screen. Any idea what would cause this? I just purchased acrobat pro dc.
Thanks!

Found this solution:
The default "Save As" dialog in Acrobat DC is different than the dialog that you've had in earlier releases of Acrobat, it also allows you to save to the cloud and previous locations you've saved files to. It is possible that when Acrobat tries to connect to "the cloud", it runs into problems. You may want to try to turn this feature off to see if that brings your save as dialog back: Open up Acrobat's preferences, then go to the "General" category and deselect "Show online storage when saving files":

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test.

SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,

Hi，
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HT1430 I receive emails but when I try to send emails, I get a box that says that the "recipient was rejected by the server because it does not allow relaying"

I can receive emails over AOL but cannot send them. When I do, I get a box that says "recipient was rejected by the server because it does not allow relaying"

That's because you did not enter your screen name and password for the outgoing (SMTP) mail server on the phone. Or if you did they got erased. Go to Settings for the account and enter them.

Frustratingly my gradient dialogue box does not allow colour gradient the colour stop is inactive

My gradient dialogue box does not allow me to use the colour stop slider, only black and white, the colour stop box is inactive

Your last post was blank. Perhaps you tried to attach a screen shot to an email, which is not allowed on the forums. TO show a screen shot you must come back to the web page and use the camera icon to embed an image, like this:

HT4528 cannot send email a copy goes in the out box and says the receipient was rejected by the servicer because it does not allow relaying?

cannot send email a copy goes in the out box and says the receipient was rejected by the servicer because it does not allow relaying?

Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server SMTP>Primary Server then turn Server ON and fill in both User Name +Password under Outgoing Mail Server.

Caption Does Not Allow Me to Type a Message

How can I write a message in the caption boxes of the different templates within iPhoto when I click email to share a photo as it does not allow any text to be placed or typed into the caption boxes?
Can someone suggest something to make this part of the iphoto programme work please?
Thanks

Restart the phone

HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

In attempting to sync my Outlook Contacts to my iphone 5, Outlook shows in the drop down, but it does not allow click-on, then below is listed only my email information, nothing else, no calendars, contacts. When I click on the email, it adds new acct

In attempting to sync my Outlook Contacts to my new iphone 5,in iTunes, Outlook shows in the drop-down box, but it does not allow click-on. Individual items are not listed to click on. The only listing is my email address and when you sync it, it really does not sync, it adds another email account with the same name, and no contacts sync with it.

also - when I use camera wizard it just tells me the phone is busy or in use and I should retry.
If I use it through windoes explorer - it shows me the camera to computer symbols and a line moving between then but bombs out saying camera is busy.

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

HT2798 I have a Mac OS 10.6.8 server in my classroom that I have networked to each student's account. How do I create a folder that allows them to place their finished assignments in it, but does not allow them to go in and remove anything from that fold

I have a Mac OS 10.6.8 server in my classroom that I have networked to student accounts on the iMacs in the room. How do I create a folder that allows studnts to place their finished assignments in it, but does not allow them to go in and remove anything from that folder?

You want a "Drop Box" style folder. You should be able to achieve this by creating a folder and giving it permissions similar to the "Drop Box" folder in your users Public Folder (i.e. write only permissions.)

What is the last resort if Adobe DNG PE still does not allow to increase WB adjustment range ?

what is the last resort if even Adobe DNG Profile Editor still does not allow to increase WB adjustment range sufficiently (through modified .dcp profile) ?
the raw file in question = https://app.box.com/s/yyd43xq29cdsu2mvyp5w
thx.

You can use the curves to further shift the color.

Cannot send mail - server does not allow relaying

I keep getting a sporadic error message on my ipad: "cannot send mail. The recipient was rejected by the server because it does not allow relaying". Sometimes it doesn't happen and the mail sends fine. Sometimes I get the error message but the message then sends later. Sometimes it never sends.
Can anyone help?

Hi, I've suddenly encountered this problem. I have a 1st gen iPad. I've reset, deleted, re-added, turned on both outgoing servers, added my password--this last doesn't stay in the primary outgoing server field; when I go back in, the password field is filled with the (optional) text again and when I 'click' into the authentication box, the password is no longer checked. However, these are all filled in the secondary outgoing server, so it shouldn't matter. Restarted the iPad a couple times. Using system 5.1.1--I think that's as far as I can go. Any miracles out there?

ERROR: policy does not allow granting permissions at this level outlook

Hi All,
Our users are attempting to send sharing requests to each other via Right Click Calendar | Share | Share Calendar
Availabilty only works fine but Limited and Full Access fails with the error: policy does not allow granting permissions at this level.
I can see that the default sharing policy is set for availabilty only so I assume I need to add our internal SMTP addresses to the sharing policy with increased right's.
But... From our testing in our LAB we found that if the exchange org does not have a connection to the federation setup it works fine straigh out of the box.
Does this sound right or is my LAB just messing with me?
Cheers
Josh

Hi VK, looks like these threads should resolve your problem:
Assembly does not allow partially trusted
callers
"That assembly
does not allow partially trusted callers."
That assembly does not allow
partially trusted callers
Assembly does not allow partially
trusted callers.
WPF Assembly does not allow
partially trusted callers
cameron rautmann

TextInput box maximumLength does not allow to lose focus

Similar Messages

Maybe you are looking for