Texts from T778W table

Hi All-
When I look at the entries of T778W table, I find HTEXT column which shows texts for different categories, whereas the same field doesnt exists in the table. Where from this field can be fetched? Its not there in T778W? Which table will have this field??
Tx

Thanks to all of you.
But in T777W, I dont find any Infotype field. I want to extract the text based on infotype and HILFm fields..is there anyother table??
Tx

Similar Messages

  • How to pass the text from a table to the field label on the selection scre

    hi guru's
      i have requirement were in i have to pass the text from a table as field label for
       a input field on the selection screen.
      EX:    selection screen  
                (xxxxxxx )  __________   
                field label    
      please help 
    regards,
    vara

    hi all,
    can you please check the code, and suggest am i doing wrong any were.
    types: xtab(200).
    data : ttab type table of xtab,
    w_so type xtab.
    data: routine(32) value 'TEMP_ROUTINE',
    program(8),
    message(128),
    line type i.
    AT SELECTION-SCREEN OUTPUT.
    select field text DATA_ELEMENT from zauthgrptxt into table t_fieldlabel where STARALLOWED EQ c_asteriks.
    DESCRIBE TABLE t_fieldlabel LINES N.
    w_so = 'REPORT ZTEMP_PROGRAM.'.
    append w_so to ttab.
    w_so = 'FORM TEMP_ROUTINE.'.
    append w_so to ttab.
    loop at t_fieldlabel.
    w_field = t_fieldlabel-field.
    CONCATENATE 'SELECT-OPTIONS: ' ' P_' w_field zspace ' FOR ' ' T_FIELDLABEL-' w_field ' NO INTERVALS NO-EXTENTION.' INTO w_so.
    append w_so to ttab.
    endloop.
    w_so = 'ENDFORM.'.
    append w_so to ttab.
    generate subroutine pool ttab name program
    message message
    line line.
    if sy-subrc = 0.
    perform (routine) in program (program).
    else.
    write:/ Message.
    endif.
    The sy-subrc = 4. nothing is coming into 'program' at generate subroutine pool
    very urgent requirement please help
    thanks,
    vara

  • Deleting Text from a Table

    I want to know the shortcut for deleting text from a table on a macbook pro with the latest version of Microsoft Word. I want to keep the table and it's formatting but I want the current information deleted and don't want to have to do this cell by cell. I highlight all the text I want deleted and then.........???????
    Please help, this is very frustrating!!!

    Thanks David! You are the best!

  • How do i delete text from a table cell

    I want to delete text from a cell or table but not the cell or table themselves. How do I do this? The 'delete' function does not work.

    Mac Word 2011. i found the answer: 'fn' (function') key + 'Delete' key. if i had a full desktop keyboard it would be the 'Del' key, NOT the 'Delete' key.

  • Copying text from excel table in PDF, pastes rectangle boxes into other programs.

    Adobe acrobat X Std.
    I have a PDF file with text, graphics and an excel table in it.
    I add comments to the PDF file and reprint it to a new PDF file.
    In the new file I cannot select text from the excel table and paste it into anything.
    When I paste into word or other programs I get rectangle boxes.
    If I go to the original PDF I the text copies just fine.
    Any ideas would be great.

    Here is a video!!
    http://www.youtube.com/watch?v=J3CJfBlZuW0
    Adobe illustrator CS3, M/S Excel 2003, HWP 2002(Korean Wordprocess),
    Macro Keyboard, script, Action ...

  • Not like operator not working while matching text from two tables

    Hello  Everyone,
    I want to find the Id from table child where the column name  is not matching with at least first term of column name from parent table.
    I am not getting proper output. can anyone help me.
    Output should be :-->ID 6 & 7
    with child as
    (select 1 id, 'Genentech'  as name from dual union all
    select 2 id, 'Altana Pharma AG'  as name from dual union all
    select 3 id, 'Yamanouchi'  as name from dual union all
    select 4 id, 'Sigma-Tau'  as name from dual union all
    select 5 id, 'Schering-Plough'  as name  from dual union all
    select 6 id, 'Pharma AG'  as name from dual union all
    select 7 id, 'Pfizer'  as name  from dual
    ), parent as
    (select 1 id, 'Genentech number'  as names from dual union all
    select 2 id, 'Altana Pharma AG'  as names from dual union all
    select 3 id, 'AG site/Yamanouchi'  as names from dual union all
    select 4 id, 'sigMa Tau'  as names from dual union all
    select 5 id, 'Schering-Plough'  as names  from dual union all
    select 6 id, 'AG'  as names from dual union all
    select 7 id, 'Inc'  as names  from dual
    select *
    from child a, parent bc
    where a.id=bc.id
    and upper(a.name) not like (bc.names)

    One way:
    WITH child AS
            (SELECT 1 id, 'Genentech' AS name FROM DUAL
             UNION ALL
             SELECT 2 id, 'Altana Pharma AG' AS name FROM DUAL
             UNION ALL
             SELECT 3 id, 'Yamanouchi' AS name FROM DUAL
             UNION ALL
             SELECT 4 id, 'Sigma-Tau' AS name FROM DUAL
             UNION ALL
             SELECT 5 id, 'Schering-Plough' AS name FROM DUAL
             UNION ALL
             SELECT 6 id, 'Pharma AG' AS name FROM DUAL
             UNION ALL
             SELECT 7 id, 'Pfizer' AS name FROM DUAL),
         parent AS
            (SELECT 1 id, 'Genentech number' AS names FROM DUAL
             UNION ALL
             SELECT 2 id, 'Altana Pharma AG' AS names FROM DUAL
             UNION ALL
             SELECT 3 id, 'AG site/Yamanouchi' AS names FROM DUAL
             UNION ALL
             SELECT 4 id, 'sigMa Tau' AS names FROM DUAL
             UNION ALL
             SELECT 5 id, 'Schering-Plough' AS names FROM DUAL
             UNION ALL
             SELECT 6 id, 'AG' AS names FROM DUAL
             UNION ALL
             SELECT 7 id, 'Inc' AS names FROM DUAL)
    SELECT *
      FROM child a, parent bc
    WHERE a.id = bc.id
           AND UPPER (REGEXP_REPLACE (a.name, '[^[:alnum:]]')) NOT LIKE
                  '%' || UPPER (REGEXP_REPLACE (bc.names, '[^[:alnum:]]')) || '%';
    Regexp_replace can be avoided and replaced by translate there if you know for sure what characters you are expecting.
    ID NAME ID_1 NAMES
    1 Genentech 1 Genentech number
    3 Yamanouchi 3 AG site/Yamanouchi
    7 Pfizer 7 Inc
    Cheers,
    Manik.

  • Sql text from statspack tables

    Hi,
    How can I get sql information from statspack tables stats$sql_text, stats$sql_summarry..?
    I tried writting sql but not able to get the proper results, please help.
    select b.hash_value hash_value, a.snap_time snap_time, b.module module, b.fetches fetches, b.executions executions,
    b.rows_processed rows_processed, b.cpu_time cpu_time, b.elapsed_time elapsed_time from stats$snapshot a,stats$sql_summary b
    where a.snap_id=b.snap_id and b.snap_id between 1 and 13
    and I need to get the complete stats$sql_text.sql_text in the same query without using any procedure or function..
    version is 9.2.0.8.
    Thanks
    clin

    I'd also do this the way MOD says.
    But if you are feeling adventurous, you could explore cascading delete. You can specify a primary key with "on delete cascade", which makes referred-to records automatically delete. Google for oracle delete cascade or search your Oracle docs.
    I wouldn't do cascading deletes myself, though. For one, I've ran into enough trouble with many "smart" db features when trying to do db administration.

  • How can I copy text from a table in a format that's readable when I paste it into an internet based data recording system?

    I have to fill in forms regarding foster children every week, then export the text to an on-line data recording system for each child. The old pages let me copy (cmdA ) the whole document and past it into where it needs to go.
    The new version includes inverted commas and I have to copy the document headers separately from the information contained in the table. It's a bit of a pain!

    I have to fill in forms regarding foster children every week, then export the text to an on-line data recording system for each child. The old pages let me copy (cmdA ) the whole document and past it into where it needs to go.
    The new version includes inverted commas and I have to copy the document headers separately from the information contained in the table. It's a bit of a pain!

  • Download chinese text from internal table to PC text file

    Hi Experts,
      Iam downloading internal table (which is having records in chinese text) on to PC file. But the iam not getting correct text in the pc file. Iam getting some garbage values text.
    Iam using GUI_download FM to donwload the text.
    Iam using internal table
    Begin of itab occurs 0,
    text type string,
    end of itab.
    and passing paramters.
    Filename
    codepage
    table.
    Can you please tell me how can I achive this and what are the parameter need to pass for this.
    Thank In Advance.

    Hi,
    You can use follwoing  funtion modules instead of GUI_DOWNLOAD. It will be more easier.
    SAP_CONVERT_TO_CSV_FORMAT
    SAP_CONVERT_TO_TEX_FORMAT
    SAP_CONVERT_TO_TXT_FORMAT
    SAP_CONVERT_TO_XLS_FORMAT
    SAP_CONVERT_TO_XML_FORMAT.
    I hope this will help you out.
    Help children of U.N World Food Program by rewarding  points and encourage others to answer your queries.

  • Copy text from allocation table to purchase order

    I am unable to get header/item text to be copied to follow-on Purchase order. I am unable to link AK1, AP1 to purchase order text types. Help please.
    Thanks.

    I am unable to get header/item text to be copied to follow-on Purchase order. I am unable to link AK1, AP1 to purchase order text types. Help please.
    Thanks.

  • Fetching data from a table and displaying it on the text box

    Hi,
    I have created a dialog program in which created a container(text box)  to enter data upto 1000 characters.
    Iam capturing the data and storing it in a custom table. In PBO I want to fetch data from my custom table (if data is already present :1000 characters data) and display it on screen.
    Please let me know how do i do it?

    hii Pavani,
    declare this two sttements in Screen
    MODULE STATUS_DATA.
    MODULE SELECT_DATA.
    In PBO, Under SELECT_DATA write Select query like:
    (considering the DB field to be text and Screen Field to be SC_TEXT)
    select text from <DB Table> into SC_TEXT where <condition>.
    *note if u r selecting more than one field than write fields in (   ),eg. (f1....f2) )
    Plz let me know for  any further queries.
    Regards,
    Apoorv

  • Copy text from table to table issue

    Using CS6 on PC Win 7 64bit
    not noticed this before probably becasue I usually copy in from Excel or Word docs, but when I copy text from one table to another in a document  its copying it as a nested table,
    if I just copy a single  cell then thats ok but anything else its placed as a table within the target table.
    Probably something really obvious I've overlooked, but its driving me nuts
    Have looked in  prefs and Clipboard  is set for just text, apart from that I cant see anything
    thanks for any help you can give

    Hi Bob
    thanks for that speedy reply.
    I've just been doing some testing and I'm not sure if the results I'm getting are how things should be.
    I just called up one of my recent excel tables and did what I usually do, highlight from the top left cell to the bottom right hand corner cell, Ctrl-C
    Excel table is always 11 column but  the number of rows varies from week to week, from 50 or so to 250.
    Opened an ID table  template I use which width wise is  the same amount of columns as my source excel file 11 columns, but only a few rows.
    Place the cursor and highlight the first row in ID  Ctrl-V,  table is filled and it auto inserts more rows to the limit of the object box  and then I just drag the table down to fill the page and then just click and drag the loaded cursor to create more table space on the next page if needed, nice and simple.
    Just opened a new  table with 6 rows and 4 columns
    and tried to paste into a table with 2 rows and 4 columns expecting it to automatically fill and give me the overfill red icon on the frame but it doesnt
    but it does with text from outside of ID, I just tested it, it automatically fills all the table and adds rows until the object fram is ful and then I can just use the overfill facility to increase the table size
    Seems odd that this only works with externally copied material

  • SQL TO search for a text from one of the table in a scheme(user)

    Hi folks
    Is there any way to serch for a text from a table in a schema(user) where we dont know from which table that text belongs to .
    If yes please post me ..
    Thanks

    Try this
         SQL>  var val varchar2(5)
         SQL>  exec :val := 'as'
         PL/SQL procedure successfully completed.
         SQL>  select distinct substr (:val, 1, 11) "Searchword",
                         substr (table_name, 1, 14) "Table",
                         substr (t.column_value.getstringval (), 1, 50) "Column/Value"
                    from cols,
                         table
                            (xmlsequence
                                (dbms_xmlgen.getxmltype ('select ' || column_name
                                                         || ' from ' || table_name
                                                         || ' where upper('
                                                         || column_name
                                                         || ') like upper(''%' || :val
                                                         || '%'')'
                                                        ).extract ('ROWSET/ROW/*')
                            ) t
         --        where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
                order by "Table"      
         Regards
    Singh

  • Gettting text from header.

    Hello,
    I would like to know where a text appearing in
    vl03n -> Go to [menu] -> Header -> texts
    is stored.
    I mean I need the name of the table and the field, because I need to print the text in a form.
    Thanks a lot.
    Also I would appreciate to know how to find out the info by myself -in case.
    Thanks again.

    Hi
    You can't get the text from any table
    You have to use the fun module READ_TEXT
    pass the parameters OBJECT,ID,NAME and LANG
    NAME  = Delivery doc No
    OBJECT = 'VBBK'  (table)
    LANG = 'EN'
    ID  take it from the Text by double clicking GOTO->HEADER something like '0001'  or '0002'  etc
    see the doc
    READ_TEXT
    READ_TEXT provides a text for the application program in the specified work areas.
    The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
    After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
    If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
    Function call:
    CALL FUNCTION 'READ_TEXT'
    EXPORTING CLIENT = SY-MANDT
    OBJECT = ?...
    NAME = ?...
    ID = ?...
    LANGUAGE = ?...
    ARCHIVE_HANDLE = 0
    IMPORTING HEADER =
    TABLES LINES = ?...
    EXCEPTIONS ID =
    LANGUAGE =
    NAME =
    NOT_FOUND =
    OBJECT =
    REFERENCE_CHECK =
    WRONG_ACCESS_TO_ARCHIVE =
    Export parameters:
    CLIENT
    Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
    Reference field: SY-MANDT
    Default value: SY-MANDT
    OBJECT
    Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
    Reference field: THEAD-TDOBJECT
    NAME
    Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
    Reference field: THEAD-TDNAME
    ID
    Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
    Reference field: THEAD-TDID
    LANGUAGE
    Enter the language key of the text module. The system accepts only languages that are defined in table T002.
    Reference field: THEAD-TDSPRAS
    ARCHIVE_HANDLE
    If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
    The value '0' indicates that you do not want to read the text from the archive.
    Reference field: SY-TABIX
    Default value: 0
    Import parameters:
    HEADER
    If the system finds the desired text, it returns the text header in this parameter.
    Structure: THEAD
    Table parameters:
    LINES
    The table contains all text lines that belong to the text read.
    Structure: TLINE
    Exceptions:
    ID
    The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
    LANGUAGE
    The parameter LANGUAGE contains a language key that does not exist in table T002.
    NAME
    The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
    Possible errors:
    The field contains only blanks.
    The field contains the invalid characters ‘*’ or ‘,’.
    OBJECT
    The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
    NOT_FOUND
    The system did not find the specified text module.
    REFERENCE_CHECK
    The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
    WRONG_ACCESS_ TO_ARCHIVE
    The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to get input text values from adf table - Urgent

    Hi Friends,
    This is my requirement. I designed customized master - detail - detail page. I customized the page in below format.
    1. Master Data Field (Input text,etc) .
    2. Detail in table format ( Rows are mapped to child table) and i given two buttons for to create row and delete row. I designed the table based on the example provided in forum for to create customized table. The input text component is mapped to the rows.
    Now i want to retrieve all the data's entered in the rows. The table is mapped to child table. When i read the values from the table its showing null.
    If any one faced this problem and fixed it, please send me the solution.
    Thanks & Regards
    VB

    Did you look into the valueChangeEvent?
    It has oldValue and newValue attributes.
    public void SaveMaterial(ValueChangeEvent valueChangeEvent) {
    Object oldVal = valueChangeEvent.getOldValue();
    Object newVal = valueChangeEvent.getNewValue();
    // check if you see what you are looking for.....
    getSelectedRow();
    SaveMaterial(material);
    }Timo

Maybe you are looking for