Tftp from solaris to win xp

hi
I'm on a win xp system and start a tftp-session.
So I can transfer a file from the defined tftp-dir on the solaris-system to any xp-dir
c:\>tfpt ux-server get filename d:\xp-dir\filename
now I'm on the solaris system and want the same transfer:
file from solaris tftp-dir to any xp-dir
Does it work?
How is the correct command?
How is the definition of the xp-target
best regards Jan

Mr.Elendig wrote:
XP is a waste of time, get 7 from the start instead.
If you have a valid non-oem win7 key you can download it legally from microsoft. If you got an oem key, you can get a new copy from whoever made/sold your computer.
If you use Arch, you can download all you want, and you don't need a key.
Regardless, he won't be installing XP onto sata drives unless he uses an oem copy on the recovery partition, otherwise forget it.
Whether his CDROM works or not, XP isn't going anywhere.
Migrating from Arch to Win XP: So is he or isn't he? He likes it so much, he's going to switch back?
The way he's acting, Windows is too difficult for him.

Similar Messages

Oracle migration from Solaris to Win

Dear All,
I need to create a test database, so I have to migrate a 10.2.0.1 DB from Solaris (64 bit) to Windows 2003 Standrard Server (32 bit).
The problem is that I cannot see anything related to this Win version in the v$transportable_platform view, the only one near to this is "Microsoft Windows IA (32-bit)"... This is not an IA machine, so I assume that my only way to transport is exp/imp... There is 100GB of data, so any help would be highly appreciated related to the speed...
Thanks,
Franky

Windows Server 2003 32bit (based on x86) means Oracle generic software for Windows 32bit. You can use RMAN's crossplatform-feature, although a direct conversion doesn't work (because of different endianess), you need some extra steps. Refer to this document:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/dbxptrn.htm#CHDFDAFH
Werner

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!.

I got error when I export database ORACLE 9i from solaris 9.

I want to export full database ORACLE 9i from SOLARIS 9 to import full database on ORACLE 9i on windows.
I set oracle environment and NSL_LANG with command:
bash-3.00$ export ORACLE_SID=TIS
bash-3.00$ export NLS_LANG=AMERICAN_AMERICA.TH8TISASCII
and then run command to export:
bash-3.00$ exp system/manager@TIS full=y file= /u03/dmp/TISfull.dmp log=/u03/dmp/exp_TIS.log
I got error message as:
Export: Release 9.2.0.1.0 - Production on Thu Oct 8 17:57:32 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in TH8TISASCII character set and UTF8 NCHAR character set
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at "SYS.DBMS_AW", line 105
ORA-06512: at "SYS.DBMS_AW", line 221
ORA-06512: at "SYS.DBMS_AW_EXP", line 264
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_AW_EXP.schema_info_exp
. exporting cluster definitions
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
How can I solve this problem?
Any suggestion?

#### HOW to solve it.
## To check the default temporary tablespace of the database:
SQL> select property_name, property_value from database_properties;
## check DEFAULT_TEMP_TABLESPACE, if it use wrong temporary tablespace, run:
SQL> alter database default temporary tablespace temp;
## check user with temporary tablespace, run command:
SQL> select username, temporary_tablespace, account_status from dba_users;
## change temporary tablespace:
SQL> create temporary tablespace temp1 tempfile '/data/u01/app/oracle/oradata/TIS/temp_b.dbf' size 100m;
SQL> alter database default temporary tablespace temp1;
SQL> drop tablespace temp including contents and datafiles;
SQL> create temporary tablespace temp tempfile '/data/u01/app/oracle/oradata/TIS/temp01.dbf' size 100m autoextend off extent management local uniform size 1m;
SQL> alter database default temporary tablespace temp;
SQL> drop tablespace temp1 including contents and datafiles;
Thanks

SSH from solaris 10 to RHEL 5

Hi,
I want to do passwordless ssh from solaris VM to linux server.
Kindly tell me the complete steps.

On the machine attached to the screen in front of you:
<pre>
mkdir -p ~/.ssh
chmod 700 ~/.ssh
rm -f ~/.ssh/id_dsa
ssh-keygen -t dsa -N "" -f ~/.ssh/id_dsa
ssh username@remote_host "mkdir -p .ssh; chmod 700 .ssh"
ssh username@remote_host "echo "$KEY" >> .ssh/authorized_keys; chmod 644 .ssh/authorized_keys"
ssh username@remote_host
(should log you right in without prompting for password)
</pre>

Need Best Practice for Migrating from Solaris to Linux

Hi Team,
We are migrating our Data Center from Solaris to Linux and our EBS 11i, database 10g (10.2.0.5) is 6TB. Please let us know the Best Practice to Migrate our EBS 11.5.10.2 from Solaris to Linux RHEL 5.
we require Database 10g (10.2.0.5) on Linux x86-64 RHEL 5 and Application EBS on Linux x86 RHEL 5. Please let us know for any details.
EBS version: 11.5.10.2
DB version: 10.2.0.5
We have checked the certifications in Oracle support.
Oracle EBS 11.5.10.2 is not certified with Linux x86-64 RHEL 5.
Oracle EBS 11.5.10.2 is certified on Linux x86 RHEL 5.
So we require Database 10g (10.2.0.5) on Linux x86-64 RHEL 5 and Application EBS on Linux x86 RHEL 5.
Thank You.

You can transportable tablespace for the database tier node.
https://blogs.oracle.com/stevenChan/entry/10gr2_xtts_ebs11i
https://blogs.oracle.com/stevenChan/entry/call_for_xtts_eap_participants
For the application tier node, please see:
https://blogs.oracle.com/stevenChan/entry/migrate_ebs_apptiers_linux
https://blogs.oracle.com/stevenChan/entry/migrating_oracle_applications_to_new_platforms
Thanks,
Hussein

Complexities of Migrating Oracle 10g from Solaris to HP-UX Itanium

Can anyone share their experiences with regards to migrating Oracle 10g from Solaris on a Sun platform to HP-UX 11i v3 (Itanium) on HP Integrity servers. We are trying to consider all the risks associated with such a move. How much time delay did you experience in resolving unexpected issues along the way? How complex is the process? If you had to do it all over again, would you?
In addtion, we will also be migrating Oracle eBusiness Suite 11i (11.5.10.2).
We appreciate your helpful feedback.
Thank you.

Here is more information:
- the database size is currently about 500GB
- our ASP allows us to be down as much as we want however the company's own needs can only allow a downtime window of two days (over the weekend)
- i presume further that RMAN might be an option to use to backup the database and instance to some transportable media
- it would take about four days to get that media from the ASP to our facility so durign that time the instance at the ASP would have to be used
- after we get the backup media and load everything into our in-house site, our last step would be to find a way to migrate all changes over the WAN. I am told that unless the platforms are the same on both ends, mirroring will be extremely difficult or impossible. If we have a platform that is different from the ASP platform, then the migration of all changes will require conversion and other mechanisms. I am told that HP-UX has so much complexities that this will be a daunting task to accomplish.
Do you have any opinions and recommnedations?

Requesting Windows Experience Index scores from anyone running WIN 7 on either current-model 13" MBPs... Thanks!

Requesting Windows Experience Index scores from anyone running WIN 7 on either current-model 13" MBPs... Thanks!

Hi mchainmchainmch,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Migration Oracle db from solaris to aix

Hi,
I would like to ask you for a best way how to do..
We have a large international Oracle migration effort from Solaris to AIX. We have some challenges where a standard export/import will not work due to the extended distance between sites. As an example we are migrating from Japan to Texas.
What is the best tool to use?
I looked around and I found Oracle Golden Gate.
do you have any other idea?
Thank you,
Regards,
Tom

807813 wrote:
I dont have more info about the project but there will databases (maybe 500) with different sizes (x MB - x TB) and there could be single and RAC.
I am looking for any tool/utility where I will be able to prepare migration document which could be used as baseline for migration all of them.I do not think it will be possible to use one approach for all DBs in your case. You should split DBs into groups you may use different approaches.
Among 500 DBs will be:
a) databases with "low availability" requirements where long downtime is possible. so you can stop app, take an export, import into remote db, re-target app to new db.
b) databases where only short downtime is possible. then you can use DataGuard or some replication technologies (OGG, Shareplex, DataCurrents) to make "final sync".
c) databases with "high availability" requirements where NO downtime is possible. Here you can use some replication technologies (i.e. DataCurrents and may be others can do it). First you copy data to remote DB and "remember" SCN you got the source dump, then you keep replicating all changes starting from this SCN. As soon as remote DB becomes in sync, you quickly switch the app to new DB.
But I never did migration accross states (more than 1000 miles).Distance does not matter. You should have good bandwidth network connection between sites.

Migration of weblogic 8.1 from solaris to 10.3 in Linux

Hello All,
We want migrate our WebLogic 8.1 from Solaris to 10.3 in linux, i am unable to find any documents on this.
Can any one help me on this.
Thanks,
Nkhil

install linux version of weblogic 10.3
create domain, you may have to extend your domain to include adf libraries.
start admin server
goto, console create datasource
also you can enable tunneling
open your project in jdev
create an app. server for tunneling
deploy it.
that's what I did.

Upgrade from Solaris 8 SPARC with Sun cluster 3.1u3 to Solaris 10 SPARC

Dear All,
We are planning an upgrade of the OS from Solaris 8 SPARC to Solaris 10 SPARC on a two-node active-standby clustered system.
The current major software we have on the Solaris 8 system are:
1: Sun Cluster 3.1u3
2: Oracle 9i 9.2.0.8
3: Veritas File System Vxfs v4.0
4: Sun Solaris 8 2/04 SPARC
Any pointers as to what sequence and how the upgrade should be done?
Thanks in advance.
Regards,
Ray

yes I know it can be quite complicated and complex, but Sun provided us with a detailed documentation, at least in our case Solaris 9 to 10 it was very helpful.
You might get better help in the cluster forum http://forums.sun.com/forum.jspa?forumID=842
-- Nick

Migrating from Solaris 2.6 to 8.0

We are migrating from Solaris 2.6 to 8.0, and my concern is all code and application which are on 2.6 is portable or not ?. Also we are using oracle 8.1.7 as out database. All code are written in C.
Can anyone help me in this "porting"?
Thanks in advance
KP

Does someone can tell me where i can find information about
migration from solaris 2.6 to 8.0 concerning C and C++ programs and shell scripts
Thanks you in advance
sunsifac

Upgrade to Solaris 10 from Solaris 8

My client has upgraded from Solaris 8 to Solaris 10. In the process the
partition /lu (live update) was created at about 8GB. The root partition is currently at 94% and removal of /lu has not recovered this space. Please
advise best practice to resolve this problem.
regards,
OraclWzd.

Thanks for the reply. I guess I did not make it clear. The /lu (live update) directory needs to be removed in its entirety. It sits under the root partition and is the result of the upgrade from Solaris 8 to 10. We backed-up the directory to tape (over 8GBs) and removed all the files and sub-directories under /lu. The utilization under the root partition remains at 94%. Why would the over 8GBs removed not be returned the available space under the root partition?
thanks,
OraclWzd

Solaris 10 01/06 liveupgrade from Solaris 8

Hi all,
I have to upgrade a few SUN V100 and V210 from Solaris 8 >>> 10 01/06 in the next time.
Does someone know, if it�s possible to run liveupgrade therefore , and if such an update from 8 >>> 10 is possible at all?
... other ideas ?
Thanks for a comment
TORO

We are researching just such a thing now with Sun. If you have the partitions to devote to Solaris 10, then yes, Liveupgrade will work. I can't give details as we have not worked out the details but Sun has shown it too us.

Live upgrade from solaris 8 to 10

how do i upgrade from solaris 8 to 10 using live upgrade on a sun netra t1 machine?

THere is a good intro to LU at
http://www.sun.com/bigadmin/collections/installation.html
beyond that, see docs.sun.com

Tftp from solaris to win xp

Similar Messages

Maybe you are looking for