The account password was not specified. Error after setting up a second Crawl Database and Crawler on different server.

We have a three server farm. (SPWebTest, SPAppTest, SPDBTest)
We have added an additional database server (SPDBRMTest) and an additional application server (SPAPPRMTest).
Today I created a new Crawl Database on SPDBRMTest and a new Crawler on SPAPPRMTest.
I create a distribution rule to all crawling activity for 1 web application to the new crawl database on SPDBRMTest.
This web application was part of the original crawl and had no errors or issues. We are trying to scale our Search to improve performance but when a full crawl is executed against this content source I get the following crawl error:
"The account password was not specified. Specify the password."
I have tried re-entering the "Default Content Access Account" but the issue continues.

Hi Brian,
when you add the crawl rules, do the account that is provided have the permission to read the content at the web application?
http://technet.microsoft.com/en-us/library/jj219686(v=office.15).aspx
please disable the loopback check, perhaps it may help:
http://support.microsoft.com/kb/896861
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Adding an Account: The account information was not found

For some reason, my iCalendars were no longer syncing, so I deleted the account in iCal, and went to re-add it. When I try to re-add, I get this cryptic message:
The account information was not found.
The server has not specified a calendar home for the account at "/ -- http://cal.me.com/".
Does anyone know what's going on here. I've been trying for a number of days with no success.
Thanks.

With iCal Server, every users has a particular server path to their calendar on the server. Have you attempted to see if iCal app can automatically find this path? Account template would be CalDAV.

TS1398 tonight i have upgraded my Ipad2 to ios 6 by it's own wifi,after compete downloading and installation the wifi password is not accepted by ipad2,i have tested so many times and i entered password correctly.please help

tonight i have upgraded my Ipad2 to ios 6 by it's own wifi,after compete downloading and installation the wifi password is not accepted by ipad2,i have tested so many times and i entered password correctly.please help

are other things still connecting to the wifi without a problem?
Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>?

CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key

Hi Experts,
    We are facing following problem in our ESS/MSS system. Request to suggest solution ASAP.
We are having EP7 and ECC6
*CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE*
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.per.in.address.fc.FcPerAddressIN.readRecord(FcPerAddressIN.java:270)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressIN.readRecord(InternalFcPerAddressIN.java:545)
     at com.sap.xss.hr.per.in.address.fc.FcPerAddressINInterface.readRecord(FcPerAddressINInterface.java:150)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressINInterface.readRecord(InternalFcPerAddressINInterface.java:201)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressINInterface$External.readRecord(InternalFcPerAddressINInterface.java:277)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverview.onBeforeOutput(VcPerAddressINOverview.java:267)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverview.onBeforeOutput(InternalVcPerAddressINOverview.java:250)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverviewInterface.onBeforeOutput(VcPerAddressINOverviewInterface.java:158)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface.onBeforeOutput(InternalVcPerAddressINOverviewInterface.java:140)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface$External.onBeforeOutput(InternalVcPerAddressINOverviewInterface.java:224)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:569)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.per.in.address.model.HRXSS_PER_P0006_IN.hrxss_Per_Read_P0006_In(HRXSS_PER_P0006_IN.java:218)
     at com.sap.xss.hr.per.in.address.model.Hrxss_Per_Read_P0006_In_Input.doExecute(Hrxss_Per_Read_P0006_In_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 61 more
Edited by: KISHOR PONKSHE on Nov 7, 2011 11:37 AM

Hello Kishore,
Please remove the entry from the table V_T582ITVCLAS related to CL_HRPA_INFOTYPE_0006_IN
Then check.
Best Regards,
Deepak.

The requested URL was not found error

Hi gurus,
I have a report that has a parameter file. When I call the report the parameter form is displayed but after I enter the parameter values and click SUBMIT QUERY, I receive this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
The following is the URL that displays the parameter form
http://RZ-apps-svr/dev60cgi/rwcgi60.exe/getjobid113?server=RZ40Repser
Does anyone have an idea on how I can make this work.
Thanks

"trying to run a report over the web"...
Can you type the exact string into the Address line of a browser and make it work?
I've had this error when
1. Typos
2. & where I should have a ?
3. I didn't have access to the DNS name
4. I was using .runtime from Java and forgot to throw in leading ^ before the \ to make things carry through correctly in NT
Pounding away at the Address line is the easiest way I've found to solve this problem, since 99% of the time it's a typo or malformed URL attempted to be sent via http: invisibly from my app.
Good Luck!

I contacted the itunes store support and asked for an explanation of a refund and then my first name (for the account data) was not accepted - though correct - only when cancelling the second name it went through. How can that be???

Hello - I wonder what can have happened. I got a mail from the itunes store with the info of a refund for an App that I cannot have purchased. Then I asked for help via the support and had to fill out a form with data. My account name (first name and last name) was already there and when I finally wanted to submit my request for support it said that my first name ( there are 2 for that) was not correct. I had the idea of cancelling the 2nd 'first name = only M. and then the request was accepted.
What might be the reason for all that turmoil? I mean the refund for s.th. that I did not buy and then the non acceptance of my first name's data?
I appreciate a comment, aimeeh

Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away.

ICal "The account information was not found"

I'm trying to add a CalDAV calendar within iCal and keep getting this window. I used a anonymous username so I could take a screenshot to show you. All the other users setup without issues, but this one is hassling me. Here is the screen shot http://grab.by/7lfP
Thank you!

With iCal Server, every users has a particular server path to their calendar on the server. Have you attempted to see if iCal app can automatically find this path? Account template would be CalDAV.

The Network Path was not Found - Server 2008

I am managing a Windows Server 2008. When I go into the Group Policy Management Council and attempt to edit, or add group policy it comes up with an error "Failed to open Group Policy [...] The Network Path was not found." I am new to using Windows Servers and quite confused as to the problem.

Hi,
This problem may be related to network access. I list some common factors and corresponding troubleshooting steps as below. Please check them one by one and let me know the result.
1> DNS issue
From the problematic PC, please run the following commands and then check if the issue still exists:
1) Can you ping FQDN of the DCs in your networks?
2) Can you ping IP of all the DCs in your networks?
3) Does the DNS configuration point to the correct DNS server?
2.
1). Start -> run -> cmd
2) Type nslookup, and then press Enter; Type set type=all, and then press Enter.
3) Type _ldap._tcp.dc._msdcs.<yourdomainname>, and then press Enter to check the result.
If SRV records could not be resolved successfully, please type 'net stop netlogon' and 'net start netlogon' to regenerate SRV records.
2>. Permission
Ensure you logon DC using the user with domain administrator privilege. If so, please check if you have the proper permission on sysvol files under %systemroot% and inf file under %system root%
3>. PDC is not available.
By default, Group policy object editor connects PDC role to enumerate GP settings. Please
refer to the following article to confirm which DC is PDC role:
How to view and transfer FSMO roles in Windows Server 2003
http://support.microsoft.com/kb/324801
How to view and transfer FSMO roles in the graphical user interface
http://support.microsoft.com/kb/255690
After locating the PDC role, please logon it and see if sysvol file under %systemroot%\SYSVOL\ has been properly shared and has the correct structure.
If not, you can refer to the following KB to rebuilt Sysvol tree.
How to rebuild the SYSVOL tree and its content in a domain
http://support.microsoft.com/kb/315457/
4> We can control which DC is preferable DC that Group policy object editor connects by default via GP, which is User configuration\ administrative template\system\group policy\domain controller selection. Also, please enable it as 'Use any available Domain controller' and run 'gpupdate \force' to test the result.
If this issue still continue, please post back.

TS3276 In sending photos by email from iPhoto my Yahoo account password is not recognised?

In sending photos by email from iPhoto on Macbook Air 10.9.1 my Yahoo account password was not recognised?

Make sure the password is correct here:
In iPhoto > Preferences > Accounts > Select your Yahoo account on the left > Password
If your Yahoo account is not there, click the + and add it

Vista - The network path was not found 0x80070035 - Leopard SMB

Hello,
This is driving me crazy. I have Samba enabled and configured properly on my Mac. My XBOX in XBMC can see and access the shares from the Mac perfectly. Vista shows an icon in the My Networks screen for the Mac, but when I double click it I get "The network path was not found" error code 0x80070035. I've already set Vista to work with NTLMv1 correctly. What else can I do? Or is this hopeless? I really wanted my Mini to work as a media server since I have it on all the time anyway.
This is on Leopard 10.5.6.

What does C:\ConfigMgrSetup.log tell?
Torsten Meringer | http://www.mssccmfaq.de

Hi I have problem running Itunes when a try to open said Aplication support was not found Error 2 can you help me please

Hi somebody can I help me I can not runn the I tunes in my lap top cause said the Aplication Support was not fund Error 2

Hello, Mannybt.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through when receiving this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.

I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.

I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault.

An error occurred in the requested FTP operation. Detailed error description: The password was not allowed

Hi All,
We are using FTP Connection in our SSIS Package which will take a flat file from the sharepath to another FTP Path.
We used SqlServerTableConfiguration to store all the connection. Initally we have stored only the below connection int he
SqlConfiguration table. ie only the server name
Note : We are not using XML Configuration.
ConfigurationFilter
   ConfiguredValue
PackagePath
Filter_ftp
pqrft- pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
while running the job we have found that we have not stored the UserName and password so we have added the below entries in the Sql Configuration table
In the Configurationtable we have the following entires
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pgrotmlceni
\Package.Connections[FTP Connection Manager].Properties[ServerUserName]
Filter_ftp
21
\Package.Connections[FTP Connection Manager].Properties[ServerPort]
Filter_ftp
abcdXYZ
\Package.Connections[FTP Connection Manager].Properties[ServerPassword]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com
\Package.Connections[FTP Connection Manager].Properties[ServerName]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
In the package properties we have selected "DontSaveSentivity" Option.
We are getting the below error message when we run the package through jobs after deployment and also we are getting the same error message even when we run the package from Bids
Message
Executed as user:abc_xyz-proxy. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 06:53:16 Error: 2013-12-16 06:53:20.69
Code: 0xC001602A     Source: SSIS_ABC_GT_GRoots_Export Connection manager "FTP Connection Manager"     Description: An error occurred in the requested FTP operation. Detailed error description: The password
was not allowed . End Error Error: 2013-12-16 06:53:20.71     Code: 0xC002918F     Source: FTP Task FTP Task     Description: Unable to connect to FTP server using "FTP Connection
Manager". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 06:53:16 Finished: 06:53:20 Elapsed: 3.822 seconds. The package execution failed. The step failed.
ilikemicrosoft

Hi Surendiran,
The issue should occur because the syntax of the ConnetionString property of the FTP Connection Manager is incorrect. In fact, the ConnectionString property is unnecessary. I suggest that you only use the four properties instead: ServerName, ServerPort,
ServerUserName, and ServerPassword.
Reference:
http://stackoverflow.com/questions/3888170/ftp-connection-string-using-expression-in-ssis
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

The account password was not specified. Error after setting up a second Crawl Database and Crawler on different server.

Similar Messages

Maybe you are looking for