The adapter "SQL" raised an error message. Details "Login timeout expired".

Hi All
Please help me to understand "Login timeout". All feedback is welcome.
BizTalk Server 2009 on Windows Server 2008 R2 64 bit
SQL Server 2008 SP1 64 bit
BizTalk Adapter Pack 2.0
Event Viewer -> Windows Logs -> Application
The adapter "SQL" raised an error message. Details "Login timeout expired".
The adapter failed to transmit message going to send port "ALL.Exceptions" with URL "SQL://xxxxxxxxx/EsbExceptionDb/". It will be retransmitted after the retry interval specified for this Send Port. Details:"Login timeout expired".
Regards
Steve

Hi Abhishek,
Thank you for your input.
I found errors in the Table [EsbExceptionDb].[dbo].[Fault] relating to the write to the target Oracle database
Microsoft.ServiceModel.Channels.Common.MetadataException: Metadata resolution failed for OperationId:ATHENA/Table/WO_ADDITIONAL/Delete ---> System.TimeoutException: Timeout Expired at
The BizTalk send port timeout has been increased from 1 minute to 30 minute and all is well
Regards
Steve

Similar Messages

2008 r2 Copy Database Wizard Error code 0x80004005 (login timeout expired).

While on copy database wizard, step Configure the package I
get this error:
while trying to find a folder on sql an ole db error was encountered with error code 0x80004005 (login timeout expired).
If I try to run it any way, I got the following in the Execute stage:
the job failed. check the event log on the destination server for details
In the destination server, job history:
Message
Executed as user: WORKGROUP\servername$. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1
for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 3:26:57 PM Could not load package "package name omitted" because of error 0xC0014062. Description: The LoadFromSQLServer method
has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed. Source: Started: 3:26:57 PM Finished: 3:27:44 PM Elapsed: 47.83 seconds. The package could
not be loaded. The step failed.
I check the job permission with the integration service connection. try with default and with db_ssisadmin.
other info:
Source: Other SQL Server Version, Microsoft SQL Server Enterprise Edition , Build 1617, Microsoft Windows NT 6.0 (6002) NT INTEL X86
Destination: Other SQL Server Version, Microsoft SQL Server Data Center Edition (64-bit) , Build 1600, Microsoft Windows NT 6.1 (7601) NT
x64 Using SMO online transfer

Hi kexinger,
This issue might be caused by the insufficient permission for the SQL Agent account, please check the SQL Agent service account has sufficient permissions to the various folders. For detail information, please take a look at the following article:
http://mattsql.wordpress.com/2014/01/06/quick-tip-could-not-load-package-xxx-because-of-error-0xc0014062/
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (a

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (and on top the page reads JRun Servelet Error). What does this mean? What should I do next?

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (and on top the page reads JRun Servelet Error). What does this mean? What should I do next?

Problem after raising an Error message in VA01

Requirement: I need to raise an error message when a particular item and sold to party combination is not having any live contract.
What I did: In USEREXIT_MOVE_FIELD_TO_VBED.
1.     XVBAP having item details
2.     VBAK structure having header details (I will get sold to party here)
3.     VAPMA structure having the contract detail if any contract is exist.
Here I raised an error message and its getting raised properly.
Problem: Once the error message came I cant able to clear or delete that line item (in va01 screen), I am getting an error message No item category is available only I can go back without saving.
And I have tried in USEREXIT_MOVE_FIELD_TO_VBAP. Here I am not able to access the contract details from VAPMA (coming as blank)
Please help me to clear this problem

Use the form-exit USEREXIT_MOVE_FIELD_TO_VBAP.
You can retrieve the VAPMA data as:
SELECT * FROM VAPMA WHERE MATNR = US_MATNR AND
                            VKORG = US_VKORG AND
                            TRVOG = US_TRVOG AND
                            VTWEG = US_VTWEG AND
                            SPART = US_SPART AND
                            KUNNR = US_KUNNR.
You will find this code in form VAPMA_SELECT in include MV45AFDB_VAPMA_SELECT

TMG events and raising an error message

I have written the code in TMG events and raising an error message for a certain condition.Whenever the error message is getting triggered it is making all the fields read only.So the user is not be able to change the value.
Any Solutions Please.?

Hi,
It TMG events will be triggered after entering values in other field and -> press enter
Follow the steps.
Go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Raj.

I am trying to store music for two different iPods on the same computer, against two different Apple IDs. When I try and download content from the Cloud I get an error message?

I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

How to raise multiple error messages at a time in a BADI

Hi all,
I'm using CHECK method of BADI ME_PROCESS_PO_CUST for some validation in ME21N/ME22N. I want to raise multiple error message at a time, when user clicks on Check button or Save button. Please let me know, is there any function module for this or is there any particular procedure for this?
Thanks in Advance,
Siva Sankar.

Hi,
Raising messages from within BAdis is not a good choice and from the look of it , it appears to be causing a dump.
Look if the BAdi interface has any exceptions defined for the method, if so, raise the exception with your message like:
MESSAGE e002(sy) WITH 'Error' RAISING <badi_exception>.
Otherwise call the FM POPUP_TO_CONFIRM To show msgs to user
Regards
Kiran Sure

Raise an Error message in ME21N

Dear All,
I am using user exit (SRVDET: EXIT_SAPLMLSP_040) to raise an Error message, it will terminate ME21N by the Error message. Did anyone know how to make it return to ME21N after an Error message...
I try to set screen to 500, 210...etc. but it seems make the program hung after leave screen. Any idea? Thanks a lot!
BR,
Well

Hi
Try to use the BADI ME_PROCESS_PO_CUST
and raise the error message
see the sample code
BAdI Name: ZCHECK_PO_LINE_ITEM (Implementation name) PO Account assignment
Definition Name: ME_PROCESS_PO_CUST
Interface Name : IF_EX_ME_PROCESS_PO_CUST
Implementing Class: ZCL_IM_BADIN_ACCOUNT_ASSGN
Method :            PROCESS_HEADER
METHOD if_ex_me_process_po_cust~process_header .
DATA : re_data TYPE mepoheader.
*get the item data
CALL METHOD im_header->get_data
    RECEIVING
      re_data = re_data.
re_header = re_data.
IF ( re_data-bsart NE 'ZOC' AND re_data-bsart NE 'ZPC' ).
    IF ( re_data-bsart <> 'ZIC' AND re_data-bsart <> 'UB' ).
      IF re_data-bukrs NE '1001'.
        MESSAGE ID 'ZM_MSG' TYPE 'E' NUMBER '000' WITH 'Use only Sipchem Company'
                                        'Code for External Procurement'.
      ENDIF.
    ENDIF.
ENDIF.
ENDMETHOD.
Method :            PROCESS_ITEM
METHOD if_ex_me_process_po_cust~process_item .
DATA: v_menge TYPE bamng,   " PR Quantity
        v_statu.              " PR Status
DATA : re_data TYPE mepoitem,
       re_data1 TYPE mepoaccounting,
re_accountings TYPE purchase_order_accountings ,
header TYPE purchase_order_accounting.
*get the item data
CALL METHOD im_item->get_data
    RECEIVING
      re_data = re_data.
IF ( re_header-bsart NE 'ZOC' AND re_header-bsart NE 'ZPC' ).
    IF re_header-bsart EQ 'ZRL'.
      IF re_data-konnr EQ space.
    MESSAGE ID 'ZM_MSG' TYPE 'E' NUMBER '000' WITH 'You cant create a Release order'
                                          'without a reference to Outline Agreeement'.
      ENDIF.
    ENDIF.
    IF ( re_data-banfn EQ space AND re_data-anfnr EQ space ).
      MESSAGE ID 'ZM_MSG' TYPE 'E' NUMBER '000' WITH 'You can create a Purchase order'
                                                     'only with reference to a PR or RFQ'.
    ENDIF.
    IF re_data-knttp NE 'K' AND re_data-pstyp NE '9' .
      IF syst-cprog EQ 'RM_MEPO_GUI'.
        IF re_data-uebto IS NOT INITIAL OR
           re_data-uebtk IS NOT INITIAL OR
           re_data-untto IS NOT INITIAL.
      MESSAGE ID 'ZM_MSG' TYPE 'E' NUMBER '000' WITH 'You cant change delivery settings'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

One of the IDOCs has an specific error message (status 51 Idoc not posted)

Dear Experts,
ple. provide the solution for my issue.
In my list of compaines one of the company had an external partner(warehouse) who takes care of their products.
Communication between that external partner software and my system(PVS) is happen through IDOCs.
But one of the IDOCs has an specific error message ( status 51 and status text : Specification for units and quantites containe error),
acctually we are receiving picking meterials from the external system to my system.
I can able to see the Inbound Idoc and status, I am not able to see the Outbound Idoc, then how can I test why its happening this problem and I how can I give the analysis properly please suggest me.
Thanks in advance
Suresh

Suresh,
Welcome to SDN. Adding to Jürgen Comment, Just double click on status 51 (at node), then in next screen there will be one information (long text) button, just click on it. Some times it will give good details about the error. the information can also suggest direct trasaction to correct the customization, some times!
try for ur case.
Reddy

Meter reading data error... error message Details: CRM_IU_IC_BI013

Hello all,
After i confirm the BP and premise in web UI 2007 i go to Meter Reading then I get 2 messages one is error message Details: CRM_IU_IC_BI013
when i click on details I get the following info
Diagnosis
An error (communication error) occurred during the remote call of function module ISU_METERREAD_GET_REMOTE in meter reading data processing.
System Response
The system cannot execute the action.
Procedure
This is probably only a temporary disruption. Restart your application later.
If the problem is a permanent one, contact SAP.
and second message is a information message saying New Meter Reading Results will be created
any suggestions?
Thanks,
Raj.

Hi,
in most of the cases, I'd expect an RFC or authority issue here. But for details debugging would be needed to check, which return code the function module provides. Before you could check the remote connection and if the rfc-user has sufficiant access rights.
KR
Uwe

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
"The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
              Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be wonderful.
             I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                  ThanQ SO very much!
                                                                         [email protected] or [email protected] or [email protected] .
                                                                                           You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                            that's my Facebook "handle". ThanQ 4 taking the time 2 read all of this!
                                                                                            hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                            as marking this page in my FAVORITES so I can find it fast! Take Care!!!

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

I am trying to update a number of items which the software check brings up: It runs and says it is installing but at the end I get this error message: The update could not be expanded, and may have been corrupted during downloading. The update wil

Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
Thanks

Thanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

Thank you for responding. Nothing actually worked! After reading the posts online, I called Apple. They indicated they have seen problems with some software after their upgrades. The technician was able to fix the problem on my computer remotely, but I have no clue what he did! But, it was definitely related to their recent upgrade to my computer.

The adapter "SQL" raised an error message. Details "Login timeout expired".

Similar Messages

Maybe you are looking for