I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

Similar Messages

Why won't my ipod sync into itunes? it doesn't show a device is connected when i connect my ipod.

my ipod wont show up on itunes, it says there is no device connected even when my ipod is connected to my computer.

Hello gespinal94,
Thanks for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario

I am having trouble with my iTunes recognizing my iPad. It recognizes my iPhone just fine, and I have gone through the entire troubleshooting section. Anyone have any possible solutions?

I am having trouble with my iTunes recognizing my iPad. It recognizes my iPhone just fine, and I have gone through the entire troubleshooting section. Anyone have any possible solutions?

Device not recognized by iTune
http://support.apple.com/kb/TS1591

TS4006 Is there google maps data available for Chad, Africa ? I am trying to see where a relative is who works for an Non profit organization there, i have the privacy agreement to do so. In case they are kidnapped there, i would like to know the last pos

Is there google maps data available for Chad, Africa ? I am trying to see where a relative is who works for an Non profit organization there, i have the privacy agreement to do so. In case they are kidnapped there, i would like to know the last position. I am getting an error that google maps is not available so i asusme there is no map data. Wout it be at least for such cases be possible to get longitude and latitude instead of nothing ?
Thanks for ideas / suggestions

Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

5G iPod- Can't access my iPod library in iTunes

Help! I can see the songs on my ipod library but I can't access them. I can't put videos into my library, but my video podcast manage to find there way into it. What am I doing wrong? i've installed the newest update and reset the ipod, but no luck... any suggestions? thanks... it's driving me crazy...

We now have the same problem. From our iMac we can see our PC's iTunes library, but cannot load it; the progress bar runs indefinitely. The PC, however, can see the iTunes library on the iMac. This used to work.

TS3297 My CC is just fine and I have been used it for bying apps and ets

My CC is just fine and I earlier regularly used it without any problems. For the last month or so I keep getting a message "Your billing method is declined. Please choose another payment method." ???? I think this is your error and you HAVE TO CORRECT IT!!!

These are mainly user-to-user forums, you are not talking to iTunes support here.
The name and address that your credit card is registered to is exactly the same as you have on your iTunes account, and have you checked with your card issuer to see if it's them that are declining it ? If it's not them then you can try contacting iTunes support and see if they can see why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Trying to add a 45 min clip to a 3 min clip. 45 min clip exports alone just fine, and so does the 3 min clip. Together they export with no final product. Any help?

I've been working on a compilation made up of video clips of my friends' wedding. There are 18 clips all together of the ceremony and random stuff from the wedding. I spent a few days (a couple hours at a time of course) working to get the clips in the proper arrangement with some transitions and volume adjustment. 12 of the clips are of the ceremony alone, and the other 6 are the random stuff. I put all of the ceremony clips together in one project and exported just fine (approx 42 mins). I also put the extras together and exported just fine (approx 3 mins). I duplicated the original ceremony project and added in the extras to have an extended version which is all clips in chronological order (approx 45 mins). I originally tried exporting the extended, but there was no final video. I then tried the ceremony vid and it exported just fine. I then went ahead and tried the extended again but still the same thing, no video. I then tried the extras alone in one clip and it also exported just fine. I would like to have a DVD of the basic ceremony as one selection, and extended version as the other. Can anyone help me with trying to figure out what might be going wrong?
The extended version lets me choose to export just as the other two clips, and just as I've been exporting since I had iMovie 11 (I've uploaded over 100 vids to youtube using the same settings, by sharing with Quicktime.). When the export process is done there's no message, and the video isn't on my desktop which is where I have all of my vids exported to, and when I do a spotlight search all I get is the project file.
Please help, this DVD is very important to my friends (the newly weds) and I, any advice is appreciated, thanks in advance!
Message was edited by: AlexRC113

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

MP3 link won't open on a website using Ubuntu 14.04, window say the file is corrupt but it works onb other computers just fine and worked on this computer using

Had Ubuntu 12.04 and upgraded to Ubuntu 14.04 and now when trying to open an MP3 audio link on a website that used to work, now I get an error message that says file is corrupt. Using Firefox browser that is up to date. What now? The file opens fine in Documents with VLC Player.

Please post the link so we can look it over.

My mac app store cannot get a secure connection although my internet is fine and i have the correct time and date. I cannot get onto the app store to update. It just keeps saying cannot make a secure connection do i want to continue anyway

see above

This procedure is complicated, but you probably won't have to do all of it.
Take each of the following steps that you haven't already tried until the issue is resolved. Back up all data before making any changes.
Step 1
Check the status of the service. If it's down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Check that the date (including the year) and time shown by your system clock are correct.
Step 3
Restart your router and your broadband device, if they're separate.
Step 4
If you connect to the Internet through an HTTPS or SOCKS proxy server, follow the instructions in this support article, or deselect the proxy entirely.
Step 5
Boot in safe mode and test.
Step 6
Make sure Parental Controls aren't active for your account.
Step 7
Follow the instructions in this support article to change your DNS settings. If there's no change, revert the settings.
Step 8
If possible, test on a different network, such as a public Wi-Fi hotspot or the cellular network of your phone.
Step 9
Launch the Keychain Access application. In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu at the top, select
When using this certificate: Use System Defaults
Close the inspection window. You'll be prompted for your administrator password to update the settings. Revert all the certificates with non-default trust settings. Never again change any of those settings.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Next, select the login keychain. Delete any expired or otherwise invalid certificates.
Log out, log back in, and test.
Step 10
Launch the Activity Monitor application. Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter "ocspd" (without the quotes) in the "Filter" text field. Is a process with that name listed?
If not, back up all data, then triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Move all the files in the folder that opens to the Trash. You’ll be prompted for your administrator password. Reboot, empty the Trash, and test.
Step 11
If you've moved to a different country, select
Store ▹ View My Account
from the App Store menu bar, then click
Change Country or Region
and update your billing information.

Unable to install ICloud 4.0 on Win 8.1 PC. Get Windows Installer error message. But Windows installer works fine. Any solutions?

I cannot install ICloud 4.0 on my Win8.1 PC because I get a recurring message that the Windows Installer has failed. The Windos installer works fine on other applications. So I suspect it is in the ICloud software. I have uninstalled Icloud 3.2 and deleted the apple internet services files but still no luck. Any ideas?

The error message says "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor"
I am trying to update iCloud to 4.0 by installinh iCloud64.msi on Windows 8.1.

When I hit reply in hot mail... only about 1/3 of my old email follows me to the reply screen.... it does this only on my notebook but is fine on my desk top... both run windows XP and both have the same version of firefox

I have an ACER notebook running XP and a HP desk to running XP... both run the same version of Firefox... on the notebook when I'm in an email (MSN) and hit reply only a portion of my existing email will go to the new reply screen..... and when I try to scroll down it stops part of the way down and won't let me see the complete email, let alone add a reply at the bottom....
Yet my desk top works fine..... Help please.... [email protected]

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

My ipad does not appear as a device in itunes when connected (1st time trying to sync). all other apple devices are fine and I have the latest itunes version.

I have a new ipad2 for xmas . I have tried to sync the device to itunes and it is not being seen. I have the latest version of itunes, updated last night, and have several other devices that are seen fine (iphone/ipods).
When I connect the usb direct to the mac iphoto starts but then that is it - itunes will not recognise the device......
I have gone thourgh the suggested support help on the apple website and came to the last point - review community ... so here I am!

What you provided is not everything mentioned.
Your Mac is running 10.5.8 or later and iTunes 10?
You are connecting the iPad direct to a USB port on your Mac and you have tried every port?
You have reinstalled the Apple Mobile Device Service?
If your Mac is running Snow Leopard - 10.6, have you checked this link?
http://support.apple.com/kb/TS3540

Adobe Paper extension for PS CC has worked for many months. Today it disappeared from the Extension menu. I reinstalled and received a "successful reinstall" message but the extension does not appear any more.

Why has the Adobe Paper extension for PS CC disappeared from the Extension menu?

And, of course, as soon as it isn't 3am, I realise that it is because I haven't run the programs in the background. Oh dear...

My USB flash drive, which has worked before, isn't recognized by my Mac anymore. How can I recover data on it?

Help, please?

I've found multiple data recovery programs, but Iäm wondering if they might just do some damage and whether they're reliable?

I just had to get a new hard drive for my mac book pro and I have the old one saved onto a hard drive, how do I get all my saved info back onto the new hard drive?

My hard drive on my mac book pro went so I had to get a new one. I had everything saved onto my external hard drive and I don't know how to resynch it to the new hard drive so my computer will have everything on it that it used to. does anyone know how to do this?

Are you recovering Lion or later Time Machine backup with a Lion or later machine?
If you are, then use this article:
http://support.apple.com/kb/HT4718
Other Time Machine restore options are here:
http://support.apple.com/kb/ht1427
Note, if recovering from a PowerPC Mac (iMac G5, PowerMac, Mac Mini G4, iBook, Powerbook), this tip is important:
http://discussions.apple.com/docs/DOC-2295
Otherwise use the recommended restore option with whatever backup software you used initially.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

Similar Messages

Maybe you are looking for