The agent of the target is unreachable

Hi,
Iam new to grid control. In my grid control manager for one of the database instance it says the agent of the target is unreachable. What are the things, i have to look into? Do I have to start stop the agent or what?
Please answer my question.
Thanks,
An

You could be facing several issues .
However, maybe it would be best to check 271126.1 How to Troubleshoot "Agent Unreachable" Status and "Upload greyed out"

Similar Messages

"The Agent of this Target is Unreachable" & EMD Upload Error

Hi There,
I've been working on this problem for three days now and I'm stuck! Ok so here's the issues:
I am monitoring two SQL Server via Enterprise Manager (Oracle Grid). Both worked for months, however, once the server that the SQL Servers were installed on was reboot they both were showing up "The Agent of this Target is Unreachable" in the Grid console. However, after I started and stopped the agent on the development SQL Server server it showed up in the GRID. However, the pre-production does still not show up after I start and stopped the agent on the pre-production server. When I tried to upload the agent on the pre-production server it gives the following error:
EMD Upload Error: Upload was successful but the collection is disabled - disk full
I deleted the access_log files and I don't see a space problem. I secured the agent. I resysnced the agent ....
FYI the Grid is on a unix machine and the SQL servers are on a windows server.
Please help!
J

I am monitoring two SQL Server via Enterprise Manager as in Microsoft's SQL Server?

How to delete the host on GRID after the target agent alreary been removed

I already uninstalled the agent on the target host, the server still show on the GRID and show agent is not recheable, what do I need to do in order to delete from the GRID once I delete the agent.
thanks

if you want to delete the agent of the Configuration --> Agents section of grid control , you need to delete the agent of the mgmt tables
it s a process complex

Need to change the targeting group of a Rule or monitor after a alert is created.

Hi All,
I have created many alerts and they are working fine. Currently due to business requirement we have installed Windows server 2012 operating systems in our production environment. But we have targeted the
"Windows server 2008 r2 full operation system" group as per the below screen shot. As we now have to import the management pack for Windows server 2012 as well.
What we have planned is to change the targeting group from "Windows server 2008 r2 full operation system"
to "Windows server operating system group" so the alert / monitor or rule will target all windows server which has been discovered in SCOM rather that only the servers running Windows server 2008 r2.
I was also not able to set overrides for this as that server was not coming under Windows server 2008 r2 full operation system as it was a Windows server 2012 agent.
I can also go ahead and create new alerts but i have created custom of 1000 alerts and i cannot go ahead and re create them.
Is there any way to change them. If yes Can i do a bulk change via powershell ?
Below is the screenshot of what i really want. Can any on e please help.
Gautam.75801

You can't really change the target class of a monitor in a sealed vendor pack. If this is your own custom pack, then you can change the target class no problem, but this would need to be done on the unsealed XML (using VSAE or some other authoring tool).
Then you can seal the pack and re-import (should be upgrade compatible, since you are just changing the target).
I'm not familiar with this particular monitor in your screenshot, but it looks like this should probably target Exchange? If this is the case, then I would recommend targeting the closest typed class that the monitor should run against. In this case, some
type of Exchange class that is already in the Exchange management pack.
Otherwise, you can also create your own custom class for targeting, which I describe in detail on my blog.
Here are all my sample VSAE fragments.
Here is an example of
using the Application Component base for your new class.
Here is an example of
using Local Application base for your new class.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Error: while populating the target.

While populating the target table gettig the following error:
ODI-1228: Task Int_HDM_IND_PRTY_ETHN (Export) fails on the target ORACLE connection ORACLE_ETLDEV_INOVA_3.
Caused By: java.sql.SQLException: ORA-01471: cannot create a synonym with same name as object
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

Hi,
Bottom line: The object name is already persist in ur back end DB.
Login to ur back end schema and query,
select * from all_objects where object_name like '<object name which ODI generate>%'
Drop it manually and run the interface.
Cause for the problem, initially u would have ran the same interface with different KM and opted DELETE_TEMPORARY_OBJECTS to False/ODI fails without dropping the temporary table, so ODI will keep the C$_<object name> in back end (may be in table form).
Now, with DBLINK u are trying to create Synonym with the same name as the earlier object which eventually fails.
Makes sense?
Thanks,
Guru

Startup application doesn't start on cRIO (work fine on the target with LV RT)

Hello!
I have a application (running on a cRIO-9075) that is communicating with a GPS via RS-323 (using NI-9870).
I can run the code without problems with LabVIEW RT on the target but when I build the executable and setting it up to run at startup it doesn't run.
If I remove the GPS code, the startup application will run fine. As soon as I put back the GPS code, it will not... I see that looking at a Heartbeat shared variable (no heartbeat when the GPS code is there). Also, the startup application will not run if the GPS code is there even if that code is disabled...
I have attached a screenshot of the code and one of the software installed on the cRIO for more clarity.
I'm using LabVIEW 2011.
Thanks in advance!
Vincent
Attachments:
GPS Code.PNG ‏10 KB
Software on cRIO.PNG ‏22 KB

Hello,
Sorry for the late response.
I was able to make the application work for some time and for an unknown reason, it's not starting anymore. I made a change in the code and the problem is now back.
The code still work as expected when launched using LabVIEW (arrow button).
The output from the console is attached to this message, everything seems fine to me but maybe I'm missing something.
I've looked at my code and I can't find any unreachable code (case structure or disable structure).
I don't know if it might be related but I'm also getting the famous 1502 error (cannot save bad VI without block diagram) so I have to enable debugging to be able to build my application (which doesn't start afterwards).
Any ideas?
Thanks
Vincent
Attachments:
App_NOT_Starting_Correctly.txt ‏3 KB

CSV to Oracle - (Integration) fails on the target ORACLE connection

Hi,
I am trying to load data from a csv file into Oracle db via ODI.
Here are the steps i followed:
1- Created the FILE physical schema
1- Created the Oracle data server and physical schema in Physical Architecture
2- Created and linked to logical schemas
3- Created the correspondent data models and stores and a
ble to view the data contents of the CSV and of the target table in ODI.
4- Created interface, added csv as source and oracle table as target
5- Used "LKM File to SQL" and "IKM SQL Control Append" (FLOW_CONTROL is false)
When i execute the interface, the session starts then i receive the following wrror in Operator:
ODI-1228: Task ARIBA_G1 (Integration) fails on the target ORACLE connection DEV_DW.
Caused By: java.sql.SQLException: Non supported SQL92 token at position: 116
at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java:1319)
at oracle.jdbc.driver.OracleSql.parse(OracleSql.java:1190)
at oracle.jdbc.driver.OracleSql.getSql(OracleSql.java:341)
at oracle.jdbc.driver.OracleSql.getSqlBytes(OracleSql.java:649)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
This is the Code section:
BeanShell script error: Sourced file: inline evaluation of: ``if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { out.print(" \ninsert int . . . '' : Typed variable declaration : Error in method invocation: Method getDataSetMin() not found in class'com.sunopsis.dwg.snpreference.SnpReferenceInterne' : at Line: 25 : in file: inline evaluation of: ``if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { out.print(" \ninsert int . . . '' : odiRef .getDataSetMin ( )
BSF info: Insert new rows at line: 0 column: columnNo
if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { out.print(" \ninsert into\t") ;
out.print(odiRef.getTable("L","TARG_NAME","A")) ;
out.print(" \n( \n\t") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n\t") ;
out.print(odiRef.getColList(",", "[COL_NAME]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \n) \nselect\t") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n\t") ;
out.print(odiRef.getColList(",", "[EXPRESSION]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \nfrom\t") ;
out.print(odiRef.getTable("L","INT_NAME","A")) ;
out.print(" \n") ;
} else { out.print(" \ninsert into\t") ;
out.print(odiRef.getTable("L","TARG_NAME","A")) ;
out.print(" \n( \n\t") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \n\t") ;
out.print(odiRef.getColList(",", "[COL_NAME]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \n) \n\nselect\n    ") ;
out.print(odiRef.getColList("", "[COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print("   \n ") ;
out.print(odiRef.getColList(",", "[EXPRESSION]", ",\\n\\t", "", "((INS and TRG) and REW)")) ;
out.print(" \nFROM (\t\n") ;
for (int i=odiRef.getDataSetMin(); i <= odiRef.getDataSetMax(); i++){out.print("\n") ;
out.print(odiRef.getDataSet(i, "Operator")) ;
out.print("\nselect \t") ;
out.print(odiRef.getPop("DISTINCT_ROWS")) ;
out.print("\n\t") ;
out.print(odiRef.getColList(i,"", "[EXPRESSION] [COL_NAME]", ",\\n\\t", "", "((INS and !TRG) and REW)")) ;
out.print(" \nfrom\t") ;
out.print(odiRef.getFrom(i)) ;
out.print("\nwhere\t") ;
if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { out.print("\n\tJRN_FLAG <> 'D'\t") ;
} else {out.print("\t(1=1)\t") ;
} out.print("\n") ;
out.print(odiRef.getJoin(i)) ;
out.print("\n") ;
out.print(odiRef.getFilter(i)) ;
out.print("\n") ;
out.print(odiRef.getJrnFilter(i)) ;
out.print("\n") ;
out.print(odiRef.getGrpBy(i)) ;
out.print("\n") ;
out.print(odiRef.getHaving(i)) ;
out.print("\n") ;
}out.print("\n) ") ;
out.print(odiRef.getInfo("DEST_TAB_ALIAS_WORD")) ;
out.print(" ODI_GET_FROM\n\n") ;
} out.print("\n") ;
****** ORIGINAL TEXT ******
<%if ( odiRef.getUserExit("FLOW_CONTROL").equals("1") ) { %>
insert into <%=odiRef.getTable("L","TARG_NAME","A")%>
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[COL_NAME]", ",\n\t", "", "((INS and TRG) and REW)")%>
select <%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[EXPRESSION]", ",\n\t", "", "((INS and TRG) and REW)")%>
from <%=odiRef.getTable("L","INT_NAME","A")%>
<% } else { %>
insert into <%=odiRef.getTable("L","TARG_NAME","A")%>
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[COL_NAME]", ",\n\t", "", "((INS and TRG) and REW)")%>
select
    <%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[EXPRESSION]", ",\n\t", "", "((INS and TRG) and REW)")%>
FROM (
<%for (int i=odiRef.getDataSetMin(); i <= odiRef.getDataSetMax(); i++){%>
<%=odiRef.getDataSet(i, "Operator")%>
select <%=odiRef.getPop("DISTINCT_ROWS")%>
<%=odiRef.getColList(i,"", "[EXPRESSION] [COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
from <%=odiRef.getFrom(i)%>
where <% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
JRN_FLAG <> 'D' <%} else {%> (1=1) <% } %>
<%=odiRef.getJoin(i)%>
<%=odiRef.getFilter(i)%>
<%=odiRef.getJrnFilter(i)%>
<%=odiRef.getGrpBy(i)%>
<%=odiRef.getHaving(i)%>
<%}%>
) <%=odiRef.getInfo("DEST_TAB_ALIAS_WORD")%> ODI_GET_FROM
<% } %>
Any suggestions are highly appreciated.
Mike

Hi Santy,
No, no error or bad files.
Actually the data are moved correctly into the temp table created by ODI, but not from there to the final target table.
I found out the reason though, the knowledge modules imported were from another ODI installation!
I made sure to import the proper KM and it worked.
Thanks!

Run As Account does not exist on the target system or does not have enough permissions

We are getting below alerts,
Run As Account does not exist on the target system or does not have enough permissions.
I know we can create a Run As account with low Privilege can fix this issue ,
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
My question here is there is any other way to fix it. I tried giving below permission for scom_act account (we used for agent installation and has local admin rights) but still same issue and
also i tried with sysadmin access for scom_act as well but no luck still having same issue , any solution would be welcome
The min. Privilege for monitor SQL server
DB Server Level
a. VIEW ANY DEFINITION
b. VIEW SERVER STATE
c. VIEW ANY DATABASE
Each DB
a. SQLAgentReaderRole database role.
b. PolicyAdministratorRole database role

Check below link
http://blog.coretech.dk/msk/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

1802: This operation is currently unavailable on the target machine

Hello,
Can't RC to some workstations via ConsoleOne. I get this 1802 error
right before authentication; at the login screen. If I manully login to
the workstation, then go back and try to remote control it, it
authenticates and connects.
If I logoff, already connected, then try to RC back in via ConsoleOne, I
can't and get the "1802: This operation is currently unavailable on the
target machine" error.
- ZEN6.5 Agent ver.SP2 | Netware 6.5 | Client32 ver. 4.91 -
Thanks in Advance...
-Joe

Shaun,
How could of it just gotten disabled? Nothing was touched, they were
working and all a sudden 20 min later a couple of machines stopped
working. The weird thing is that I could get into some machines and
couldn't into others. The weirder part is that now, I can't get any of
them to work. How is that possible? And how can I get this to work again??
Thanx in Advance...
-Joe
Shaun Pond wrote:
> [email protected],
>
> sounds like remote control isn't enabled in the workstation policy...
>

ODI-1228: Task PRD-create-populate-table (Procedure) fails on the target

I get this error when trying to run PRD-create-populate-table from Oracle by example ODI
ODI-1228: Task PRD-create-populate-table (Procedure) fails on the target ORACLE connection ODI_DATA_SERVER.
Caused By: java.sql.SQLSyntaxErrorException: ORA-02264: name already used by an existing constraint
ODI-1228: Task PRD-create-populate-table (Procedure) fails on the target ORACLE connection ODI_DATA_SERVER.
Caused By: java.sql.SQLSyntaxErrorException: ORA-02264: name already used by an existing constraint
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:953)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1224)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3467)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3218)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java:1785)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2805)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

the specified constraints name is still used. Please check if you are having the order correctly ie drop table , create and insert and check if the table is dropped , if still the constraints is there then drop it from database

ODI-1228: Task SrcSet0 (Loading) fails on the target SUNOPSIS_ENGINE connec

Hi,
When we are trying to load data from MSSQL Server to Hyperion Essbase i am getting below error
ODI-1228: Task SrcSet0 (Loading) fails on the target SUNOPSIS_ENGINE connection SUNOPSIS_MEMORY_ENGINE.
Caused By: java.sql.SQLException: statement is not in batch mode
*     at org.hsqldb.jdbc.Util.sqlException(Unknown Source)*
*     at org.hsqldb.jdbc.Util.sqlException(Unknown Source)*
*     at org.hsqldb.jdbc.Util.sqlExceptionSQL(Unknown Source)*
*     at org.hsqldb.jdbc.JDBCPreparedStatement.executeBatch(Unknown Source)*
*     at oracle.odi.runtime.agent.execution.sql.SQLCommand.end(SQLCommand.java:267)*
*     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.endExecution(SQLExecutor.java:156)*
*     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.endExecution(SQLExecutor.java:1)*
*     at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:113)*
Thanks
Rama

as written here
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2421461
Please us the no_batch_update or nobu as false in the JDBC URL of the Topology Navigator. &nobu=false

(Loading) fails on the target SUNOPSIS_ENGINE connection MEMORY_ENGINE.

Hi
I have run my first interface in ODI 11g and come up with the below error during the Loading KM phase. Can anyone suggest a way to fix?
The background is that we are migrating from a 10g in a SQL Server environment to a 11g in an Oracle env. I export/imported the work rep and logical schemas. I imported the physical connections one by one since I couldn't import the master rep.
ODI-1228: Task SrcSet0 (Loading) fails on the target SUNOPSIS_ENGINE connection MEMORY_ENGINE.
Caused By: java.sql.SQLException: unknown token
+     at org.hsqldb.jdbc.Util.sqlException(Unknown Source)+
+     at org.hsqldb.jdbc.JDBCPreparedStatement.<init>(Unknown Source)+
+     at org.hsqldb.jdbc.JDBCConnection.prepareStatement(Unknown Source)+
+     at sun.reflect.GeneratedMethodAccessor67.invoke(Unknown Source)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:597)+
+     at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)+
+     at $Proxy2.prepareStatement(Unknown Source)+
+     at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)+
+     at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)+
+     at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)+
+     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:158)+
+     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)+
+     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)+
+     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)+
+     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)+
+     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)+
+     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)+
+     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)+
+     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)+
+     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)+
+     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)+
+     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)+
+     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)+
+     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)+
+     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)+
+     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)+
+     at java.lang.Thread.run(Thread.java:662)+
Caused by: org.hsqldb.HsqlException: unknown token
+     at org.hsqldb.error.Error.error(Unknown Source)+
+     at org.hsqldb.error.Error.error(Unknown Source)+
+     at org.hsqldb.ParserBase.read(Unknown Source)+
+     at org.hsqldb.ParserDQL.readNewSchemaObjectName(Unknown Source)+
+     at org.hsqldb.ParserDDL.compileCreateTable(Unknown Source)+
+     at org.hsqldb.ParserDDL.compileCreate(Unknown Source)+
+     at org.hsqldb.ParserCommand.compilePart(Unknown Source)+
+     at org.hsqldb.ParserCommand.compileStatement(Unknown Source)+
+     at org.hsqldb.Session.compileStatement(Unknown Source)+
+     at org.hsqldb.StatementManager.compile(Unknown Source)+
+     at org.hsqldb.Session.execute(Unknown Source)+
+     ... 27 more+

Still getting the error 'Unknown Token' when using the SUNOPSIS_MEMORY_ENGINE (LKM SQL to SQL).
I have updated the KM to 11g
I can run successfully using an Oracle db for staging, so it is just using the SUNOPSIS_MEMORY_ENGINE that causes a problem.
Cheers

ODI-1228: Task TMP_BATCH_MST (Control) fails on the target ORACLE connectio

Hi all,
i received this error ...plz help me...
i build process of data migration bt i received this error when i start exection of this process....
ODI-1228: Task TMP_BATCH_MST (Control) fails on the target ORACLE connection odi_oracle.
Caused By: java.sql.SQLSyntaxErrorException: ORA-00933: SQL command not properly ended
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

Have you selected the key column in target data store ?
Bhabani
http://dwteam.in

OEM grid not recognizing the targets

hi,
I have installed agent in one of my server.the same has been detected as a host in my OEM grid,but the targets in the host are not recognized by OEM.Please help me how can my OEM can detect the targets(AS,OC4J etc).
regards
sangeeth

Sangeeth,
Is your agent installed as the same OS user as your Application Server software? If not, you may be running into the problem described in Metalink Note 437078.1: Problem : iAS Discovery/Monitoring Fails If Agent Is Installed Under Another OS User Than iAS.
Please note that the scripts provided in that note will require a little bit of editing. It seems that some stray HTML and line breaks have found their way into the text.
Regards,
John P.
http://only4left.jpiwowar.com

Scale does not work for the target movie when using a poster movie

Hello,
I have various size video files that I want to scale to a certain display area on a website. I'm using the scale="tofit" attribute. It works fine for the poster movie but when the target movie is loaded it does not scale! Is this a QT bug or by design? Is there a workaround to this or am I doing things wrong? All help is greatly appreciated.
<object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" width="489" height="280" codebase="http://www.apple.com/qtactivex/qtplugin.cab">
<param name="autoplay" value="false">
<param name="controller" value="true">
<param name="href" value="heaven.mov">
<param name="pluginspage" value="http://www.apple.com/quicktime/download/indext.html">
<param name="target" value="myself">
<param name="type" value="video/quicktime">
<param name="src" value="movies/PosterTest.mov">
<param name="scale" value="tofit" >
<embed src="movies/PosterTest.mov" href="heaven.mov" width="489" height="280" autoplay="false" controller="true" border="0" pluginspage="http://www.apple.com/quicktime/download/indext.html" target="myself" type="video/quicktime" scale="tofit">
</object>
Dell inspiron 8200 Windows XP Pro

After quite a lot of Googling I found what I was looking for. This solution was quite hard to find. I found it on http://blog.deconcept.com/2005/01/26/web-standards-compliant-javascript-quicktim e-detect-and-embed (I'm using Geoff Stearns's script to embed my movies, it works great!)
Anyway here is a url to the final solution:
http://developer.apple.com/documentation/QuickTime/WhatsNewQT5/QT5NewChapt1/chap ter1_section32.html

The agent of the target is unreachable

Similar Messages

Maybe you are looking for