The approver role is only valid the next day

All the approvers which are created are only valid the next day. Requesters can only select the new approvers the day after they have been created.
Any idea how to make an approver valid the same day?

Hi,
In user validity make sure you are entering the next day as the valid from. If you have already integrated the user, the validity of the user will be good from the next day.
In the integreation of user, use the position validity and restrict via date.
Hope this helps.
Cheers, Renga
Award points if this helps ***

Similar Messages

I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck

I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck with the eraser again. What can I do? Joost van Santen

Have you tried resetting all tools?

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

I show 3 versions of PS installed: PS CC, PS CC (64 bit) and PS CC (2014). Can I just delete the 1st 2 and only keep the latest?

I show 3 versions of PS installed: PS CC, PS CC (64 bit) and PS CC (2014). Can I just delete the 1st 2 and only keep the latest?

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
-This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

CANCEL- Can I chat or talk with a human on the phone? I have an Adobe ExportPDF Annual. So, if I cancel today, I still have to pay half of the fee? I only used the service once or twice.

Can I chat or talk with a human on the phone? I have an Adobe ExportPDF Annual. So, if I cancel today, I still have to pay half of the fee? I only used the service once or twice. I was looking for a phone number to call. But, I seemed to have been in a loop. I kept getting directed to this forum. I would have really appreciated a quick link to a phone number. Much more efficient on my end.
I expected to be canceled in a few short minutes via a phone call. Instead of have been in this endless and frustrating loop to this forum.
Help please.

Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

I have set the presence to screen only but the checkbox still prints adobe livecycle

I have set the presence to screen only but the checkbox still prints. I am using adobe LiveCycle design 9 and it is a dynamic form
This check box is part of an action, where when clicked, it copy's the data from one row and puts it in another. It is also in a row that can be added and removed.
But basically I want the check box to appear on the screen but not print (including when the form is converted to a PDF when its completed)

Intel-based Macs: Resetting the System Management Controller (SMC)
Power
The computer sleeps or shuts down unexpectedly.

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page. I can't figure out the rename function either. Help?

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page.
I do have a 2008 version of Microsoft Office installed to save money, but that shouldn't affect things. I can't figure out the "rename" function either. Help?

Oh, and I also reset my NVRAM, my computer hasn't frozen again yet, so I'm not sure if it has made a difference.

Why is the bar menu of the pdf file, (often) only showing the lower half?

why is the bar menu of the pdf file, (often) only showing the lower half?

Pat,
I attach a few recent examples
any thought ?
sincerely,
marcel

When i have a web page which includes an SVG file that spans 2-3 pages, if i try to print the web page it only prints the first page.

Basically, i have an html file that embeds a large SVG file. When i try to print the html file, FF only recognizes the first page - basically the second, third, fourth pages do not appear. Is this a known issue with FF?
Can it be fixed?
FYI - Google Chrome allows you to print the other pages but unfortunately headers/footers cannot be controlled and thus overwrite some of the SVG content.

Anyone?

Wen I turn on the my macbook it only show the aple icon and it show like it looding sometink or searching for someting and it never open.

wen I turn on the my macbook it only show the aple icon and it show like it looding sometink or searching for someting and it never open.

May need to grab a micro usb cable and restore via iTunes
http://support.apple.com/kb/HT4367

Is it possible to hide the save function and only use the save as function in teststand

Hi,
When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
Is it somehow possible to "hide" the save button and only use the save as function?
Or is there another possiblity to solve my problem.
The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
What would even be great if there could be a log of what the changes were
Thx!!!

1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
Hope this helps,
-Doug

I dowloard a book sample to iBook. I then deleted it and bought the book and downloaded it. The search engine will only search the 45-page sample and not the full book. How do I get iBook to search the full book?

I downloaded a book sample to iBook. I deleted it and then bought the full book and downloaded it. The search engine keeps only searching the sample, about 50 pages, and not the full book. How do I get the search engine to search the full book?

I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
Error getting License. License Server Communication Problem only mine says Bad Device key after.
Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
i hope someone answers this soon.

How do I get the red number of already read e-mails NOT to show up in the iMail icon on the dock? I only want the number of "unread" e-mails to display in red on the iMail icon.

How do I get the red number of already read e-mails NOT to show up in the iMail icon on the dock? I only want the number of "unread" e-mails to display in red on the iMail icon.

Your last post is blank, which happens a lot to users who try accessing the forum through email rather than its web interface.
You are also in the wrong forum here. We don't do Ps Elements here.

The approver role is only valid the next day

Similar Messages

Maybe you are looking for