The Black Apple Campaign...show your support
*The Black Apple Campaign*
If you are upset with how Apple has handled this entire iPhone price drop please show your support by placing a black Apple in your signatures, MySpace, Facebook, etc.
Spread the word!
(Sample: http://www.sanctuary93.com/jlight/blackapple.jpg)
I plan to stop buying from iTunes and look elsewhere.
Similar Messages
-
I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
Thanks for any help!
GinaWhat your describing could be a logic board or memory issue.
You did or did not hear 3 startup chimes? If you hear 3 chimes when you start it, that would indicate a memory problem. Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac. -
ive recently got a new iPhone 5s due to my old one breaking, it has been sync'd but has now been showing the black apple loading screen for the last 3 hours with less than a quarter of the bar filled. what do i do?
Take it back to where you purchased the device and get another device.
-
My phone is frozen and I can not get it to "Wake up"
Stuck on the black apple logo screen. And my computer and itunes are not responding when I plug it in.
Any ideas?try doing a restart / reset first
http://support.apple.com/kb/ht1430
if this doesn't work
You can try the step here in this link.
http://support.apple.com/kb/ht1808
when you're stuck on the apple logo, the operating iOS doesn't load so itunes could not detect the device -
I downloaded ios7 on my iphone 5 yesterday. All day it worked fine, then last evening it started blinking from the white screen with the black apple to my home screen. Each screen only stays up for 3-5 seconds then switches back. I have tried shutting down and it is still happening! Does anyone know how to fix this issue without having to go into the store?
Your power adapter is OK. If the only place it will not work is in your home, your house wiring and / or the appliances connected to it are likely to be the reason your Mac will not charge.
From Troubleshooting MagSafe adapters:
Identify line noise issues.
Unplug the power adapter from the wall, let it sit for 60 seconds, then plug the adapter back in.
If the adapter works after this 60-second "rest", you most likely have a line noise issue with your power source. You should reset the adapter periodically by repeating this moment of rest. This issue occurs when the AC adapter's "over voltage protection" feature senses ground noise and then turns off the adapter.
Some possible sources of line noise include lights with ballasts, refrigerators, or mini-refrigerators that are on the same electrical circuit as your computer. This behavior may not occur if you plug the power adapter into an uninterruptible power supply (UPS) or plug it into a different circuit.
Unless the adapter continues to exhibit this behavior on a known good outlet, it does not need to be replaced.
Household wiring problems are very common. They can also be very dangerous. Fortunately most problems can be easily fixed by a qualified electrician. -
About 45 minutes ago my iphone 5S just shut off on its own. I have tried charging it only to have the white screen with the black apple showing. How can this be repaired?
Keep it plugged in and do a reboot by holding both the power and home buttons until the apple logo appears, ignoring he red slider if that appears.
-
pretty much what the title said
I went to Update my I phone (4) and It was updating then said it could not finish the update left my phone on the black apple after 40 mins went to recovery mode .. it said restore it but everytime I try it said error 18 what can i do?Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. Some glitch occured and you have to restore/erse the iPod. Y will have to restore from an existing backup if y ohave one.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
White circle with diagonal line on start-up where the black Apple was
Started up an A1138 powerbook. It showed the black Apple, then the revolving little hairy wheel for quite a while, then replaced the black Apple with this circle and now just sits there. Any ideas? Thanks
Thank you. This is a very interesting article, but I think I am in deeper trouble than I was before. I reset PRAM/NVRAM, held X during startup and ended up with a blue blank screen after a few seconds. I next reset the PMU, as per the article, with the same result - blue screen. I next tried to start up from my Leopard DVD; the optical drive did a little spinning but never loaded and I'm back at the blue screen. In addition my DVD is now stuck in the drive. My usual solution, either holding down the clicker on the trackpad, or the Eject button, or both did not cause the DVD to eject. I had some problems earlier, before all this happened, and did manage to re-install Leopard, but a little later got the problem with the broken folder icon as described in my post.
-
My iPhone is stuck on the black Apple logo screen.
Hi,
So I just bought my friends used iPhone 2G. So in the car, on the way home, I reset everything on the phone because his all his stuff was on it. So when I got home it said it was done, and it was stuck on the black screen with the white apple logo. I shut it off thinking it would come back on and go to the slide to unlock screen. Nope. It is still stuck on the black Apple logo screen. Keep in mind, this phone has never been attached to my computer. Please help me. I'm really excited that I bought this. Now I REALLY want to use this.
Thank you,
DJDo you plan on activating the iPhone with AT&T?
If so, are you currently an AT&T subscriber?
If you plan on activating the iPhone with AT&T, you need to get a new SIM card from an AT&T corporate store.
When connecting the iPhone to iTunes for the first time with the new SIM card inserted, you should be prompted with the AT&T activation process.
If you don't plan on activating the iPhone with AT&T, did your friend include the no longer activated SIM card inserted in the iPhone - the SIM card that was used with the iPhone when it was activated with AT&T? If so, you can restore the iPhone with iTunes on your computer as a new iPhone. Activation with AT&T will not be required, but the no longer activated SIM card (the SIM card that was used with the iPhone when it was activated with AT&T) must be inserted in the iPhone to complete the restore with iTunes process. -
Where do I find the black apple logo in System- Library ?
On 10.4 and 10.5 the blue apple was in System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fram ework/Versions/A/Resources/Extras.rsrc
Where is the black apple from the Snow Leopard menu bar?Most likely: /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/ where one finds the AppleMenuIcon.icns amongst all the others.
-
Can i delete the new feature that shows your recent calls when double clicking the home button?
Can the feature in the new IOS8 that shows your recent calls when double clicking the home button be deleted?
settings - mail,contacts,calendar - show in app switcher - OFF
-
We upgraded Lync Server 2010 to Lync 2013.
Users are able to login on desktop clients but unable to connect on mobile client. We get following error message:
Can't verify the certificate from the server.
Please contact your support teamPlease check the Root CA is installed on your mobile device.
Can you sign in externally?
Please check you have updated the DNS records for Lync mobile autodiscover service.
Lisa Zheng
TechNet Community Support -
HT4053 Does the navigation feature on The new Apple maps use your data allowance?
Does the navigation feature on The new Apple maps use your data allowance?
Anybody found an answer to this one yet?
-
I changed my Apple ID on my MacBook. My new Iphone5 seems to have my old Apple ID on it. Therefore I can't download apps. How do I 1) remove the old Apple ID on my Iphone and 2) install the new ID on the phone.
http://support.apple.com/kb/HT1311 Just remember apps that were downloaded with the old Apple ID will be locked to that ID. It will ask for the old ID password when trying to update.
-
I have bought my husband a new I pad and we both need to use our own on a shared computer. Will the two different Apple IDs show as separate on the i tunes program or do I need two different i tune programs?
Each device is different and will only sync what you select
Maybe you are looking for
-
Avoiding null and duplicate values using model clause
Hi, I am trying to use model clause to get comma seperated list of data : following is the scenario: testuser>select * from test1; ID VALUE 1 Value1 2 Value2 3 Value3 4 Value4 5 Value4 6 7 value5 8 8 rows selected. the query I have is: testuser>with
-
WBS element field mandatory for specific sales order
Hi Friends, I want to make the WBS element field in sale order line item to be mandatory for a specific sales order type. I am not able to add this field in incompletion log also. So can anyone let me know the solution for this. Ratna
-
Сrash or not responsible in safe mode
Hello! When loading very long page, which is music Firefox first stops after a crash occurs or does not respond in safe mode. Please tell me how to fix the problem?
-
Security Authorizations in SolMan / ChaRM
Good Day All; I am trying to get a handle on the security settings within Solution Manager / ChaRM. Would some be so kind as to point me in the direction of some documentation on this subject. Regards Don.
-
This has been a reoccuring problem. I don't use the iCloud for backup but it continues to pop-up and locks me out completely. How do I unlock the screen and get rid of the the iCloud Backup message?