The byte stream type of the given URL is unsupported

I'm trying to open .ses files in Audition CC that were created in Audition 3.0 and I get the error "The byte stream type of the given URL is unsupported" and nothing loads.
What is going on? The wave files are in a different folder but shouldn't the program ask me where to find them?

I think the link got munged!
Let's try again: http://www.aatranslator.com.au/ses2sesx.html
It appears that the Insert Web link screen in this software was adding an additional https:// at the end of the link! Hope this one works!

Similar Messages

Specifying byte stream type for Read File with Type Descriptor

Hi.
I'm trying to write a VI that reads an image file format that can have
different datatypes. What I have so far is that I open the file, read
the header, and get the width, height, number of frames, and datatype.
I calculate number of pixels by nrows*ncols*nframes with no problem,
but I'm not sure how to tell Read File the correct datatype to read
the data into.
I tried using a Case structure where I have a Read File in each case
with the correct type constant as input for that case. The problem is
that the tunnel graduates the datatype to the highest representation.
I found in Application Note 154 the discussion about Type Descriptors.
Is there a way to generate a Type Descriptor and output it from a C
ase
structure? I tried just returning the value (e.g. 0x0402 for a Word),
but Read File will just see that the byte stream type is a uint32.
Is there any other way to do this?
Thanks for any help.

I converted the code to LabVIEW 6.1 for you and attached it below.
Don't worry about being a newbie. We all start there. Keep asking this type of question and you won't stay there long.
As you are discovering, being strictly typed means that you must rewrite code even for a simple data type change, or convert everything to the same data type first. For image data, conversion can result in a lot of extra space being wasted. Use a modified version of the GLV_WaveformBuffer.vi to hold your data. Use the array functions, which operate inline, to add to and delete the data wires in the buffer. This allows you to save several different data types. You will need several different inputs and outputs to handle these data types. I ha
ve also attached a similar file created for exactly the problem you have - storing arrays of different data types (data from NI-SCOPE devices, in this case - can be float, I8, I16, or I32).
Routines that take any type work in one of two ways. LabVIEW primitives, such as plus and minus operators, work by figuring out the type and doing the right thing in the C code layer of the LabVIEW environment. Users of LabVIEW can't do this. Users can make polymorphic VIs. Polymorphic VIs are actually a single VI for every data type that are referenced by a "wrapper", the polymorphic VI. Users still need to write a different VI for every data type they need.
Take home message - if you need to work with different data types, you will need to rewrite your code for every data type or convert your data to a common data type. Polymorphic VIs and case statements are your friend.
Let me know if you need more help.
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
GigaLabVIEW61.zip ‏362 KB
sfpScpChan_Waveform_Buffer.zip ‏74 KB

How to define "byte stream type" for "open file"?

Hello,
I created some numbers (type "double") in Matlab and stored in a file. What value should I use to specify the "byte stream type" for "open file" in Labview? Should I put something like "DBL" or "I32". I don't know where to find the list of legal "types" in Labiew help.
Thanks so much!
Felicia

Looks like 7.1:
The Matlab "double" is 64 bits (8 bytes). It doesn't make much sense to use an integer datatype to read a floating point value, so you would use DBL in LabVIEW. The numeric data types table can be found here.
By the way, this assumes you saved the file as raw binary, as opposed to a .mat file, which is something different.
Message Edited by smercurio_fc on 08-08-2008 11:21 AM
Attachments:
read file 7.png ‏13 KB

About the elementary stream type

Now I get the elementary stream type composing a service, the result is number, I don't know the meaning, such as 5, 6, 12... Please help me. Thank you.

There is no complete list of PMT stream types, because this depends on many other specifications. MHP defines the following:
public final static byte org.dvb.si.PMTStreamType.MPEG1_VIDEO = 1;
public final static byte org.dvb.si.PMTStreamType.MPEG2_VIDEO = 2;
public final static byte org.dvb.si.PMTStreamType.MPEG1_AUDIO = 3;
public final static byte org.dvb.si.PMTStreamType.MPEG2_AUDIO = 4;
Other possible stream types are defined other DVB specifications. SI, DVB subtitles, and DVB teletext information are carried in stream type 0x06, and the following are defined by the MPEG-2 systems spec:
0x00     ITU-T | ISO/IEC Reserved
0x01     ISO/IEC 11172 Video
0x02     ITU-T Rec. H.262 | ISO/IEC 13818-2 Video or ISO/IEC 11172-2 constrained parameter video stream
0x03     ISO/IEC 11172 Audio
0x04     ISO/IEC 13818-3 Audio
0x05     ITU-T Rec. H.222.0 | ISO/IEC 13818-1 private_sections
0x06     ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data
0x07     ISO/IEC 13522 MHEG
0x08     ITU-T Rec. H.222.0 | ISO/IEC 13818-1 Annex A DSM CC (this is the DSM-CC defined in the MPEG-2 systems spec, not the DSM-CC spec)
0x09     ITU-T Rec. H.222.1
0x0A     ISO/IEC 13818-6 type A (DSM-CC)
0x0B     ISO/IEC 13818-6 type B (DSM-CC)
0x0C     ISO/IEC 13818-6 type C (DSM-CC)
0x0D     ISO/IEC 13818-6 type D (DSM-CC)
0x0E     ISO/IEC 13818-1 auxiliary
0x0F-0x7F     ITU-T Rec. H.222.0 | ISO/IEC 13818-1 Reserved
0x80-0xFF     User Private
Steve

How to get the byte[] size dynamically from the StreamMessage object

Hi all,
Using JMS, I am receiving the FDF file as StreamMessage from the queue and attaching it to the PDF file which is present in the local system.
For that, I have written the code as follows:
{color:#0000ff} Message msg = jmsTemplate.receive();
if(msg !=null && msg instanceof StreamMessage)
StreamMessage message = (StreamMessage) msg;{color}
{color:#ff6600}//hardcoded the byte array size value
{color}{color:#0000ff} byte[] bytes = new byte[{color:#ff0000}856{color}];
System.out.println("read msg="+message.readBytes(bytes));{color}
{color:#0000ff}PdfReader pdfreader = new PdfReader("D:\\Managing_Workflows_No_Comment.pdf");
PdfStamper stamp = new PdfStamper(pdfreader, new FileOutputStream("D:\\12345.pdf"));
FdfReader fdfreader = new FdfReader(bytes);
stamp.addComments(fdfreader);
{color} {color:#0000ff} stamp.close();
{color}{color:#000000}The above code is working fine except with the hardcoded of {color:#ff0000}byte array{color}{color:#ff0000} size value{color} which is given in {color:#ff0000}RED{color} in color.
Can anybody know, {color:#000000}*how to get the byte[] size dynamically from the StreamMessage*{color} object ?
Any help would be highly beneficial for me !!!!
Thanks and Regards,
Ganesh Kumar{color}

When you create your stream message you could add an property to your message, something like streamSize that would contain the number of bytes in your stream message. Then you could get this property from the message before declaring your array.
Tom

My iPod Touch 5th generation says disabled connect to itunes but when we connect to itunes it says on itunes that the ipod is locked with a passcode and to go onto the ipod and type in the passcode to proceed. What do I do

My iPod Touch 5th generation says disabled connect to itunes but when we connect to itunes it says on itunes that the ipod is locked with a passcode and to go onto the ipod and type in the passcode to proceed but the ipod is still locked. what do i do?

http://support.apple.com/kb/HT1212

How to give the header condition type in the CRM Sales Order for freight ?

Hi,
     We are creating Sales Order(SO) using FM 'CRMXIF_ORDER_SAVE'.And we are unable to track the FREIGHT condition type in the above FM to pass value.
     We want to check this value in CRMD_ORDER tcode.
    Pls let us know how to make it possible of the above issue.
Thanks,
Siva..

Siva,
   I guess you posted in Wrong Thread. You need to post in WAS section.
   check for any BAPI's available in CRM.
Nagesh Ganisetti.

How to give the header condition type in the Sales Order for freight?

Hi,
     We are creating Sales Order(SO) using FM 'CRMXIF_ORDER_SAVE'.And we are unable to track the FREIGHT condition type in the above FM to pass value.
     We want to check this value in CRMD_ORDER tcode.
    Pls let us know how to make it possible of the above issue.
Thanks,
Siva..

Siva,
   I guess you posted in Wrong Thread. You need to post in WAS section.
   check for any BAPI's available in CRM.
Nagesh Ganisetti.

How to change the font and type in the front panel

Can you tell me how to change the font and type in the front panel if i want to make it looks more beautiful.
1110340040

Hi there,
You can change the font size and type as shown below:
- Ee Lim -
See that button on the left side of this post...
If you feel my post is helpful, all you need is just (at most) 2 seconds to click that button, to show your appreciation. Thank you~~

What needs to be done to include the leave request type in the work flow

what needs to be done to include the leave request type in the work flow?
the present request for work flow includes the notificationto be sent to the approver
which doesnt include leave request type inthe description
to include this we need to maintain a container variable but what should be the method or abap dic object which has to be used for maintaining this leave request type container

Hi,
You can create and take where you pass leave type and get description of it and create an field in WF containr and fill it than you can use add that field when you are sending notification,.
Atul

For the new delivery type created the Idoc is not getting triggered

Hi All,
I am facing the following problem:
For every outbound delivery getting created we have an Idoc which creates the file(sending the outbound delivery details), this file is sent to a system where the picking & packing of the goods happen. This process seems to be working fine for all the existing delivery types, but now we created a new delivery type for which the Idoc is not getting triggered.
Would like to understand what setting are we missing because of which the Idoc is not getting created for the new delivery type.
The Idoc being used is: DESADV01
Message type :DESADV
Thanks,
Geeta

I believe your existing idocs are created through a output type on the delivery ? if yes, probably you need to configure an existing output type / create a new output type for your new delivery type...

I want to change the default file type in the Open File dialog - e.g. from Word to All Files

I want to change the default file type in the Open File dialog - most recently specifically in Adobe Acrobat, from Adobe Files to All Files, so I don't have to do it again and again manually. Is this possible? Is it an OS setting or an app-specific setting?

The Apps set the default to the file type it can open, sort of. However, there normally isn't a type specified. All document types that the app can handle will be offered.
Adobe, and Microsoft, tend to roll their own dialogs, so they may not be standard. I don't have Acrobat, so I can't verify that. If Adobe is puting a file type selector in their open file dialogs, it would be up to them to store the preferences.
EDIT: I checked Reader, and i see what you mean. Not terribly useful.
Message was edited by: Barney-15E

[svn] 609: Changed the svn:mime-type of the SDK's milestones.html file.

Revision: 609
Author: [email protected]
Date: 2008-02-21 14:47:48 -0800 (Thu, 21 Feb 2008)
Log Message:
Changed the svn:mime-type of the SDK's milestones.html file.
Property Changed:
flex/sdk/milestones.html

the web xml mime type setting are for static files served by the server...
if you print a file directly to the output of the servlet, you must set the mime type, so DO write :
response.setContentType( "application/vnd.ms-excel" );
IE "works fine" because it also uses the file extension to decide the mime type... but in the absolute, it's a wrong behaviour

What is the antenna connector type on the WAP4410N?

What is the antenna connector type on the WAP4410N? Is it the RP-TNC?

Apple products use mini jacks.

I can't sign in to game center in the mac i type in the password and it takes me to a blank green screen need help?

i can't sign in to game center in the mac i type i the password and it takes me to a black green screen i need help?

I have the same problem on my Mac OS X V 10.9.5. and its just 1 month old.
have tried almost everything. But it looks like it's on Apple's side because there are other people with other devices (Iphone & Ipad) having the same problem.
screenshot:

The byte stream type of the given URL is unsupported

Similar Messages

Maybe you are looking for