The crasy SELECT

Hi all,
Using this SQL
SELECT Nom FROM TLCommune WHERE Nom >= 'LIMOGES' ORDER BY Nom, Pays, Dept, Insee
give this result under SQL plus worksheet (same via VB and ADO)
NOM
krosno
La Manche et la Mer d'Irlande
Laesv
Lancashire
Landes
Lappi (Lappland)
Latviya
Legnica
Leicester and Rutland
Leipzig
Leningrad
NOM
Leon
Lirida
Leszno
Liberec
Libiria
Libye
Limburg
Limburg (Limbourg)
Limerick
LIMOGES <--------------------------------------- the city in the nom >= 'LIMOGES' in the SQL statement
LIMOGES-FOURCHES
Why the cities from krosno to Limerick are listed regarding on the WHERE clause Nom >= 'LIMOGES' ?

1 - Why, when I try to find >= 'A', no lines are return ?Assuming that you are substituting where nom >= 'A' in your original query, you should be getting some rows returned. It would help if you would post the exact query and results, using copy and paste, to be sure it is exact. It would also help if you could post your nls parameters, either immediately before or after your query, to be sure that no changes have been made. You can display your nls parameters by using the folowing query:
SQL> SELECT * FROM NLS_SESSION_PARAMETERS;
2 - What is the best nls customisation to be near ms-access or sql-server behavior ?I am not that familiar with the options or defaults of those two. I would suspect that these things or something similar can be changed there also. So, it depends on what your settings were in those environments. It sounds like, from what you are expecting the results to be, something like the following would produce the desired results:
SQL> ALTER SESSION SET NLS_COMP = ANSI;
SQL> ALTER SESSION SET NLS_SORT = FRENCH;
3 - How to set definitively nls parameters ?You can change the settings temporarily using ALTER SESSION or change them permanently using ALTER SYSTEM. You can read about them in the Oracle on-line documentation. The following link to the SQL and PL/SQL FAQ home page includes a link to how to find on-line documentation for Oracle and other useful links:
Re: How to attach a java bean in forms6i

Similar Messages

How can I pre-define the default selection in a SelectOneChoice?

How can I pre-define the default selection in a SelectOneChoice?
(1) Here's my JSF-code:
<af:selectOneChoice label="#{res['usercreate.input.sex']}"
value="#{bindings.Sex.inputValue}"
binding="#{SelectListBean.sexlist}"
readOnly="false" autoSubmit="false">
<af:selectItem label="#{res['data.sex.women']}" value="1"/>
<af:selectItem label="#{res['data.sex.man']}" value="2"/>
</af:selectOneChoice>
(2): manged bean: to set the default value to be the first in the list, my managed bean as follows:
import oracle.adf.view.faces.component.core.input.CoreSelectOneChoice;
public class MBSListBean {
private CoreSelectOneChoice sexlist;
public MBSListBean() {
public void setSexlist(CoreSelectOneChoice sexlist) {
this.sexlist = sexlist;
this.sexlist.setValue(1);
public CoreSelectOneChoice getSexlist() {
return sexlist;
(3) when i launch the page, it often gives me such warnings:
WARNUNG: Could not find selected item matching value "1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id7]
how to solve the problem ?
Thanks,
wzzdx

You could also set the default on your entity or viewobject, in the properties of your attribute.

Songs on iPod cant be synced cuz all of the playlists selected for...

all songs in my nano was gone so i tried to load songs again to it,
but iTune kept saying this message below, even there are songs in my iTune (but not in my nano).
"songs on iPod cannot be synced because all of the playlists selected for syncing no longer exist."
how do i load my songs back to my nano??
mine is 2nd gereneration.
Plz help me!!
Message was edited by: shan1211

See this user tip.
The iPod cannot be updated because one or more playlists no longer exist.
For versions of iTunes from 7 onwards, the option to "update selected playlists" is now under the "music" tab in the summary screen.

"All of the Playlists Selected for Updating No Longer Exist"

My family has 2 ipod shuffles. After purchasing a Nano recently, I inserted the cd that came with it. Apparently the existing iTunes software was removed and reinstalled. At any rate, the library still shows all the original songs, but when the Nano is plugged in, iTunes immediately gives a prompt stating "Songs on the iPod *** cannot be updated because all of the playlists selected for updating no longer exist." The library is there, the playlists that were there are there, and I can play the songs on my cpu. Is there anything I can do besides completely uninstalling everything and starting over?
iPod Nano Windows XP Pro

This user tip should help you sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

Have a 3rd gen nano, when I plug in I get "Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist." I have no podcasts in my IPOD or queued in library. Help pls. Thx

Wnen I plug in my IPOD, I gret the error message " Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist. I have no podcasts in my IPOD or queued in I tunes at pfresent. When I did try to sync a current podcast, nothing happened although the podcasts did show in my library. I did play around with podcasts several months ago, but just listened to them on the computer, the IPOD was plugged in at times though, although not set up...thx

Click here and follow the instructions.
(27971)

"...(ipod) cannot be updated because all of the playlists selected for

Please help! I get the error message, "Songs on the iPod
cannot be updated because all of the playlists selected for updating no longer exist." So it seems that I erased the playlists from my iPod. I have done the "Five Rs."
Doing the iPod Updater took 2 1/2 hrs. It did not help.
How can I get my iPod to work?

See this.
iPod cannot sync because one or more playlist is missing.

PLS-00103: Encountered the symbol "SELECT" when expecting one of the follow

Can any one tell me why I an getting compile error in Trigger with the following code (see below for the error message). Error is indicated in the IF statement Select clause.
Code:
-- AUdit Code Begin
-- Note: Ony for those tables having 'AUDIT' UDP
-- Value set to 'T'
IF (Select Count(*) From DBConfiguration
Where ConfigurationCode = 'AUDIT' AND
ConfigurationValue = 'T') > 0 THEN
WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
:old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
:old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
:old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
End;
WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
:old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
End;
WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
:old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
:old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
:old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
:old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
End;
WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
End;
End if;
-- Audit End
Error:
95/5 PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternativ
97/39 PLS-00103: Encountered the symbol ")" when expecting one of the following:
* & - + ; / at for mod remainder rem <an exponent (**)> and
or group having intersect minus order start union where
connect || multiset

Here is the code:
-- AUdit Code Begin
-- Note: Ony for those tables having 'AUDIT' UDP
-- Value set to 'T'
IF (Select Count(DBConfigurationValue) From DBConfiguration
Where DBConfigurationCode = 'AUDIT' AND
DBConfigurationValue = 'T') > 0 THEN
WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
:old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
:old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
:old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
End;
WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
:old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
End;
WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
:old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
:old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
:old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
:old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
End;
WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
End;
End if;

The html select box option is not getting displayed properly in IE11

The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some error

Hi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke

Displaying the path of the file selected by a FileChooser in a TextField

I'm just getting started with Swing. I developed a simple dialog box that has two text fields and two buttons. The objective is to open two files using those two buttons. I used FileChooser to select the files. Now, I want to display the path of the selected files in their corresponding TextFields. I use the following code to do that.
final FileChooser fc1 = new FileChooser();
final FileChooser fc2 = new FileChooser();
final TextField tf1 = new TextField();
final TextField tf2 = new TextField();
private void button1ActionPerformed(ActionEvent evt)
            int returnVal1 = fc1.showOpenDialog(labelPhpFile);
            if (returnVal1 == JFileChooser.APPROVE_OPTION)
                File file1 = fc1.getSelectedFile();
                String fileName1 = file1.getName();
                String filePath1 = file1.getPath();
                tf1.setText(filePath1);
private void button2ActionPerformed(ActionEvent evt)
            int returnVal2 = fc2.showOpenDialog(labelPhpFile);
            if (returnVal2 == JFileChooser.APPROVE_OPTION)
                File file2 = fc2.getSelectedFile();
                String fileName2 = file2.getName();
                String filePath2 = file2.getPath();
                tf2.setText(filePath2);
}The above code works fine only for the first file. Mean the path of the file selected using fc1 is getting displayed in the tf1 TextField. But, the file selected using fc2 is not getting displayed tf2 TextField. Please help me.
Thank you :)

h1. The Ubiquitous Newbie Tips
* DON'T SHOUT!!!
* Homework dumps will be flamed mercilessly.
* Have a quick scan through the [Forum FAQ's|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ].
h5. Ask a good question
* Don't forget to actually ask a question. No, The subject line doesn't count.
* Ask once
    - Don't Crosspost!
    - Two people answering one question independantly is a waste of there time.
* Don't even talk to me until you've:
    (a) [googled it|http://www.google.com.au/] and
    (b) looked it up in [Sun's Java Tutorials|http://java.sun.com/docs/books/tutorial/] and
    (c) read the relevant section of the [API Docs|http://java.sun.com/javase/6/docs/api/index-files/index-1.html] and maybe even
    (d) referred to the JLS (for "advanced" questions).
* [Good questions|http://www.catb.org/~esr/faqs/smart-questions.html#intro] get better Answers. It's a fact. Trust me on this one.
    - Lots of regulars on these forums simply don't read badly written questions. It's just too frustrating.
      - FFS spare us the SMS and L33t speak! Pull your pants up, and get a hair cut!
    - Often you discover your own mistake whilst forming a "Good question".
    - Many of the regulars on these forums will bend over backwards to help with a "Good question",
      especially to a nuggetty problem, because they're interested in the answer.
* Improve your chances of getting laid tonight by writing an SSCCE
    - For you normal people, That's a: Short Self-Contained Compilable Example.
    - Short is sweet: No-one wants to wade through 5000 lines to find your syntax errors!
    - Often you discover your own mistake whilst writing an SSCCE.
    - Solving your own problem yields a sense of accomplishment ;-)
h5. Formatting Matters
* Post your code between a pair of {code} tags
    - That is: {code} ... your code goes here ... {code}
    - This makes your code easier to read by preserving whitespace and highlighting java syntax.
    - Copy&paste your source code directly from your editor. The forum editor basically sucks.
    - The forums tabwidth is 8, as per [the java coding conventions|http://java.sun.com/docs/codeconv/].
      - Indents will go jagged if your tabwidth!=8 and you've mixed tabs and spaces.
      - Lines longer than 80 characters should be wrapped.
      - Proper indentation illustrates program logic.
* Post your error messages between a pair of {code} tags:
    - That is: {code} ... errors here ... {code}
    - To make it easier for us to find, Mark the erroneous line(s) in your source-code. For example:
        System.out.println("Your momma!); // <<<< ERROR 1
    - Note that error messages are rendered basically useless if the code has been
      modified AT ALL since the error message was produced.
    - Here's [How to read a stacktrace|http://www.0xcafefeed.com/2004/06/of-thread-dumps-and-stack-traces/].
* The forum editor has a "Preview" pane. Use it.
    - If you're new around here you'll probably find the "Rich Text" view is easier to use.
    - WARNING: Swapping from "Plain Text" view to "Rich Text" scrambles the markup!
    - To see how a posted "special effect" is done, click reply then click the quote button.
If you (the newbie) have covered these bases *you deserve, and can therefore expect, GOOD answers!*
h1. The pledge!
We the New To Java regulars do hereby pledge to refrain from flaming anybody, no matter how gumbyish the question, if the OP has demonstrably tried to cover these bases. The rest are fair game.

Plot a chart dynamically based on the values selected

Hi All,
I have some requirement like this i want to plot a chart . The chart should change dynamically based on target_name and date. What type of UI should I use ? I tried using multiselect or shuttle for choosing the target_name and date picker tool for date once i choose all this the chart should appear. Can I have a custom button called submit so once all the values are entered it plots chart ? Please help me out with our ideas.
Thanks in Advance

Hi,
Using the dependent value sets you can govern the values which can be selected based on a specific value selected in a particular segment. Example if Country name is selected in segment 1 then specific states names as per the country selected can be displayed in segment 2.
As per the requirement described you want to enable different fields based on the value selected in segment1, currently there is no standard mechanism available to enable/disable fields based on a value and you will have to do an extension/customization to meet this requirement.
Thanks,
Sanjay

How to call an action when the user selects a radiobutton

Hai
PLease help me in providing the information.
In my Project i have two radio buttons as
New
Asssessment
when the user selects new button, i want to automatically call an action in the controller(.jpf file)
Simalarly when he selects the other radio button i need to call a separate action in the controller.
Remember i dont have the submit button.
I want to dynamically call an action when the user selects the radio button.
i dont have any field inthe radio button which actually takes action as an attribute .
please provide me the necessary

Hi,
You can use JavaScript to call the action in interest upon the Radio Button Element Being Selected.Should be simple, and if your controller is part of the portlet dont forget to use the jpfScopeId to asscoiate the controller instance with the one in the portlet.
Let me know if you have any further questions.

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

How to avoid the user selecting a different path in my installer

Hello again all you helpful forum-goers!
I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory. My problem is that if the user selects a different path to which to install my primary application, the secondary installer will not put the required support files in the same spot.
Now, I think I've figured out how to get the user-selected path from the "Run executable at the end of installation" option in the Advanced pane of the LabVIEW installer configuration, and I can pass that in to my secondary installer, and that should fix the problem. However, what I'd really like to do is just not give the user the option to install my primary application in a different directory to begin with. I've looked, but cannot find any way to do that.
Does anyone know of any way to not present the option to install an application in a different directory when using the LabVIEW installer?
Thanks in advance for any suggestions,
-Joe

Ben64,
That's great! Thank you so much for your quick reply. The only reason I haven't already accepted that as my solution is that it requires a manual post-compile change to a text file. Ideally I'd prefer not to have to remember to do that every time I rebuild my installer. Is there any way that you know of to automate the process?
If not, I'm happy to have a good solution even if it takes an extra step each time to implement.
-Joe

Just upgraded to 5 from 3 - what happened to the page select icon? Can't find it in customize toolbars.

Used to be you could select which page you wished to go back or forward to from the arrow icons on the navigation toolbar. The history menu item only shows 10 sites without having to open history for today. What happened? Is there another icon or a new plug in for this functionality? I used it all the time.

''what happened to the page select icon (Back/Forward)''
The back/forward buttons have been moved to right-hand side of the navigation bar and the drop-down was removed. User right-click or hold click for one second to see the tab history. This is item #5 in my list.
The History menu also has "Open Previous session" and "Open closed windows",
to see more history use the History sidebar ("Ctrl+H") or the History Library List ("Ctrl+Shift+H") and sort or view by "Last visited".
You can make '''Firefox 5.0.1''' look like Firefox 3.6.19, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 5.0.1, or 4.0.1, look like 3.6.*)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

Is that possible to display the user selection data in the printable page?

Hi All,
I'm going to add a printablepage button on my page.
Here comes a questions.
Is that possible to display the user selection data in the printable page?
For example,
I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
Please help.

Hi Yannick,
Thanks a lot for the information. It worked.
The portlet data can be accessible using bindings, but parameter name can be different.
Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
Is this possible? If yes can you please let me know the steps?
Thanks in advance!
Somnath
Edited by: Somnath Basak on Dec 20, 2011 9:41 AM

The crasy SELECT

Similar Messages

Maybe you are looking for