The creation of device local data objects - Unable to find generated object

Hi all,
I get an error when I try to generate an ESDMA containing a "Device Local" data object.
I have created a "Device Local" data object containing a very simple node structure. The object is "active" and everything seems to work fine, until I generate the ESDMA. The following error is shown : Unable to find generated objects in repository.
The esdma is generated without problems, when I remove the device local data object.
I hope you have some ideas of what the issue might be.
Best regards,
Nima

Hi Siva
Actually i am working on this problem together with Nima and the problem is not related to SAP Basis objects.
The problem is in SDOE_WB, with the SWCV. Creating a Data object of type LOCAL DEVICE and a NODE. If you add a field/s and then activate, and look in Generated objects The Table object is not generated (only the structure and the table type).  At this point there are no syntax/error messages.
If we try to generate an esdma using the ESDMA design time, using this SWCV, it fails, with the message, Unable to find generated objects, in the repository. That is it is looking for the Table object that was not generated in sdoe_wb. This is only a problem with creating a data object of type DEVICE LOCAL, every other type of DO is fine.. I assume it is an SAP error.

Similar Messages

  • How can I truncate the time zone from a Date object without using String?

    Does anyone know how to truncate the time zone portion of a Date object and maintain the object as Date, NOT String?
    I just need the date, i.e., 05/02/2008 as a Date.
    Thanks.
    JDev1

    Although you haven't said so, I expect you must be having some problem with that?
    My wild guess: the server is creating a Date object and setting its time component to zero (midnight). Of course since Date doesn't have a timezone, that would be midnight in the server's timezone. Then you are interpreting that date as if it were in your timezone, and since you are west of the server, it appears to be 11 PM or 9 PM or something on the day before.
    What we do is to send our timezone to the server and tell the server to use it when creating the Date object. Alternatively, when formatting the Date object you could use a SimpleDateFormat with the server's timezone applied. There are no doubt other solutions that could be provided if we had a description of your problem.

  • Turning off the text for a master data object

    What happens if we turn off the texts for a master data object?  (In RSA1, under info objects - double click on info object and go to Master data/texts tab and untick the 'with texts' box).  Are there any risks in doing this?  Has anyone performed this and run into any issues?  Thanks

    Hi,
    There are no issues in turning off the texts, but if its an object that requires description in the report, say material, plant etc, then you won't have that available as the texts are disabled and not loaded.
    Cheers,
    Kedar

  • What's an easy way to determine what the user typed is a date object?

    What's an easy way to determine what the user typed is a date
    object?
    Thanks!

    Thanks for trying. Sorry for not being clear. but I figured
    it out.
    the user can type in a date, or a name to search. The format
    they type in date has to be in mm/dd/yyyy.
    I was able to use:
    if (new Date(textEntered).toString()=="Invalid Date") {
    // not a date entered
    else {
    // a date is entered
    To do what I need to do.
    Thanks.

  • Unable to find generated objects in repository - Activating BE

    Hi,
    I´m  trying to migrate MAM from Mobile 7.0 to Mobile 7.1.
    I got to import the syncbos as data objects successfully. However, when I try to activate a Backend Adapter, the error: "Unable to find generated objects in repository" comes up.
    I applied the note number 1408036, which is to correct the issue, but it didn´t work (I´ve already re-started the server).  We working on Mobile 7.1 - SP08.
    Anyone has some clue for this problem?
    Thanks.

    Hi,
    have you done the [DOE inital setup|http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm]?
    have you activate the data object?
    if dont,please do that,
    than try to activate the backend adapter.
    regards,
    lakshman balanagu
    Edited by: lakshman balanagu on Dec 4, 2009 12:13 PM

  • Apple mail problem message reads - Account removal failed with error: "The operation couldn't be completed. Unable to find an account for the UID given.".

    Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”.   - trying to remove account but get this message please help

    Try to remove the account in the Internet Accounts preference pane.

  • How to automate the creation of Function Module & Class Object (SE24)

    Experts,
    I have the requirement to automate the creation of any type of programs: ie function module (like how we normally create in SE37 together with the parameters), class object (like how we normally create in SE24 together with attribute & method), normal report (like how we did in SE38), module pool and so on.
    For example. I backuped my program into a flat file (the entire source code in txt formal or HTML) through a download program and I need to upload back this flat file into another installation of SAP.
    Does SAP provide any predefined FM to cater for the above cases or better still, does anyone know of any upload program which I can use for the above requirement.
    Thanks in advance.

    Hi Kris, I can't use the transport system as these are 2 separate SAP installation in a different place. The requirement came in the form of creation of program to be able to generate FM/Class/Report on the go.

  • How to Display the ColumnName for the Text of any Master Data Object in BEx

    Hi Experts,
    In Bex Analyzer While Displaying the Key and text of any Master data object it shows column name for master data key but not for the text, here client requirement is he wants to see the Text column name as Description  for any master data text.
    say Customer Number is a master data object , while displaying key and text of CustomerNumber - column names should look  like as below
    CustomerNumber    Description
    C11111                     Pepco
    C11112                     Coke
    but usually in Bex Analyzer it displys as following(Text without  column Name)                      
    CustomerNumber   
    C11111                     Pepco
    C11112                     Coke
    Please suggest how can we achive this requirement, thanks in advance.
    Regards,
    Chandra

    Hi Chandra,
    I suggest you to enhance your datasource with text feild, by adding text feild to your datasource in ECC side and replicate it ti BI side.
    For this you have to write code at CMOD.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/302d4b15-5847-2a10-93bb-9c45d9f06b16?QuickLink=index&overridelayout=true
    Better this doc will help you.
    Regards,
    rvc

  • How Do You Solve the Xcode 6.1.1, Playground's "unable to find suitable target device"?

    Hi. I've reset Xcode 6.1.1 (I'm on Yosemite 10.10.2), have restarted the iMac (late 2009), have plugged in via USB the iPhone 5 (runs 8.1.3), resetted even the SMC and PRAM but I still get the Playground error: "unable to find suitable target device".
    I checked the Xcode's Preferences - Downloads, on the Components pane or window it says iOS 7.1 Simulator which you could download but when I try to download it, it's just a blank progress bar, even if left for hours, it's not downloading at all. Yet when I press update and install in Preferences - Downloads, it checks it but says there's not update (if there's no update why is iOS 7.1 Simulator an option to be downloaded in the Components window?).
    How do you solve this. Do I need to reset XCode at a more deeper level? Could this be a bug in 6.1.1 update?
    Thank you in advance. God bless, Rev. 21:4

    Hi. I've reset Xcode 6.1.1 (I'm on Yosemite 10.10.2), have restarted the iMac (late 2009), have plugged in via USB the iPhone 5 (runs 8.1.3), resetted even the SMC and PRAM but I still get the Playground error: "unable to find suitable target device".
    I checked the Xcode's Preferences - Downloads, on the Components pane or window it says iOS 7.1 Simulator which you could download but when I try to download it, it's just a blank progress bar, even if left for hours, it's not downloading at all. Yet when I press update and install in Preferences - Downloads, it checks it but says there's not update (if there's no update why is iOS 7.1 Simulator an option to be downloaded in the Components window?).
    How do you solve this. Do I need to reset XCode at a more deeper level? Could this be a bug in 6.1.1 update?
    Thank you in advance. God bless, Rev. 21:4

  • I just bought a brand new Ipod touch but when I went to update it, a screen keeps popping up saying that the apple mobile device (recovery mode) was unable to install to my ipod and the ipod will keeps showing me the connect to itunes, what can I do?

    i really need help with that

    Maybe here:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    Otherwise com back with the exact wording of your error message. The one you gave does not seem correct.

  • Date creation is different from date photo taken in Finder

    Hello,
    I didn't know where to post this question. When I import photos from my Canon T3i and my iPhone4, the creation date of the photo is the date imported, not the date I took the photo. While in Finder, if I look at the photo information, the creation date is the date the photo was imported (for both the Canon and iPhone photos). I'm trying to understand why this is happening.  When I import the photos into iPhoto9, the date I took the photo is there. While that seems like the solution, it isn't since I don't import all photos into iPhoto. If I look at the photos on the memory card, the date is correct. The only time the creation date is not correct is when I import on to my iMac or MacBook.
    I'm using Snow Leopard and have no plans to upgrade to Lion.
    Thanks for your help and I apologize if I posted this question in the wrong discussion group.

    Another go at explaining it:
    There are two kinds of metadata involved when you consider  jpeg or other image file.
    One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
    The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
    Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
    Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
    When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export. However, the Photo Date doesn't change.
    The problem is that the Finder doesn't work with Exif.
    So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app.

  • I need to upgrade from  my present operating version of Mac OS X version 10.6.8 to the Snoe Leopard version which I am unable to find the app for. Is this version still offered as an upgrade?

    Hello,
    I need to upgrade from my present operating version Mac OS X , Version 10.6.8 to the Snow Leopard. However, I am unable to locate this app. Is it still available? Any help would be greatly appreciated.
    John

    Prior to upgrading to Maverick, you must FIRST make sure your iMac meets all of its system requirements. 

  • If No data Then unable to find PDF Output

    Hi
    I am working on XML Report, my problem is that
    When there is no data in the report then con. request completed with warning
    and in view output Message is "This File Cannot be opened because it has no pages"
    pls help
    Rahul

    What is your conc, pgm output ?
    How do you merge template and xml ? di you write java class to merge?
    how are you getting xml ?
    for ex:
    if your report has no data means, it shouod atleast generate something like
    <ROOT>
    </ROOT>
    , if it is generating this xml , then if you use the template, it will give you atleast blank one page.

  • Test creation of hr master data/objects

    Hello,
    in my programm i need to create some objects(training events, groups, types, locations,..)/infotypes. I would like to offer to enduser some "testing/simulation" behaviour - the infotypes will not be stored in database at the end of processing. So i wanted to use parameter vtask = 'B' - buffer of FMs RH_OBJECT_CREATE and RH_INSERT_INFTY and at the finish of procces call FM RH_UPDATE_DATABASE in case that the user wants to store information, in other case call this fm with parameter CLEAR_BUFFER       = 'X' to clear this buffer. But when i was making some test the bufer was not cleared and the objects were created after calling this fm at next runs of programm.
    So my question is: how should i clear the buffer?
    Thanks,
    JJ

    The following function calls might help..
    RH_CLEAR_BUFFER  
    RH_DELETE_BUFFER 
    RH_PM_INFTY_BUFFER_REFRESH    
    ~Suresh

  • Please help Apple community!!!! We had the iphoto icon set up on our iMac which stored over 4000 photos of our grandson sin he was a baby till 5yrs. Unfortunately my niece manage to loose this icon from the side bar and we have been unable to find it. Ple

    Question!
    We had the iphoto icon loaded in our sidebar and we have lost this icon along with over 4000 photos.
    How can we find this icon with all our photos? And are we able to retrive them!

    Hey Ralph and the rest,
    I really appreciate everyone's imput for our original post so far and was hoping to have some positive news for y'all but unfortunately we are unable to retrive these photos from anywhere.
    We have tried to retrive the icon in Finder and Applications but have been unsuccessful. We also
    tried looking for the icon in every application within the imac but unfortunately still no success.
    I know we would've, should've, could've but we never and this is the result of loosing all these precious
    photos.
    If anyone has any other ideas other than taking it to the experts we would greatly greatly appreciate this.
    Regards
    Desperate!!!!

Maybe you are looking for