The "Delete chromatic color aberration" function does not work

hello
impossible to define the purple or green color of the fringe, after several attempts ....
see photo attached, despite the presence of abundant green "impossible to define the color green"
http://adobe.ly/17DskbS
On or shortly well come this problem with the RAW photo?
xavier

Set both Defringe Amount to 0 (i.e. Both Defringe OFF) and check the 'Remove Chromatic Abberration' box just above the Defringe controls. If chromatic aberration is still present (green fringe) try manually adjusting the 'Green Hue Amount sliders ONLY.
This may be helpful, but only in English:
http://blogs.adobe.com/lightroomjournal/2012/04/new-color-fringe-correction-controls.html

Similar Messages

Mac creates a save every hour, quickly filling the external drive. The "delete unnecessary files in Trash" does not work.

How to make the Mac do save at certain intervals?
Why would I want five saves the day?
I try to delete unnecessary files to free up space.
Trash on the Mac has become very slow, the removal process was take hours.
Then the process of removing all stops.
Why files are not removed through the trash?
What could be causing the removal process?

TimeMachine is designed to back up every hour. It saves only the files that have changed during the hour. After 24 hours TimeMachine culls the (up to) 24 backups to make a single backup for the day. After 30 days it takes the 7 oldest day backups and culls them into a single week backup.
You should never manually touch files in the TimeMachine backup. It doesn't like that. The best practice for TimeMachine is to devote an external drive to TimeMachine and nothing else. Because TM backups are incremental, it is recommended that your TM hard drive be 2-4 times larger than the amount of drive space your computer is using. In other words, if your 1TB hard drive is 1/4 full (250GB in use) you should have a TM drive between 500GB and 1TB depending on how much more data you expect to add to your drive and how long you wish to keep old back files.
Having said all this, you might prefer using some other program for backups. CarbonCopyCloner and ChronoSync are two programs you might want to look at.

HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?

Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

Crystal Report for VS2010 - The Go To Page function does not work

When running a report into Crystal(VS2010), the Go To Page function does not work. Typing in a page number and pressing Enter does not take you to that page. The report remains on the current page. I'm not sure if there is suppose to be a button like the one in Crystal 8.5(VS2008).

As long as you are using the CR assemblies for VS .NET, the viewer (Win) should look like this:
Remember, the ActiveX viewer based on the Report Designer Component (RDC, referencing craxdrt.dll) is not supported in VS 2010.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces

I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

Hey skyshade13,
Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
For further information see the following information:
OS X Lion: iTunes opens to "created by a newer version" alert
http://support.apple.com/kb/TS3918
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks,
Matt M.

HT1212 My iPhones screen is broken(a black screen and the touch function does not work). I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

My iPhones screen is broken(a black screen and the touch function does not work).I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

i don't see a way for you to back up your phone, because it will require you to unlock the phone.

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

Palm Desk Top 6.2 Address Look Up Function Does Not Work In Windows 7

I recently upgraded my desk top computer's operating system from Windows Vista Home Premium to Windows 7 Home Premium.  I synchronize with a Palm Tx PDA.  HP PalmOS customer support Chat helped me work through a compatibility issue that was preventing display of Address, Calendar, Memo and To Do items on my desk top computer via the Palm Desk Top 6.2 application.  I now find that the address look up function does not work (although it worked fine when I was running Vista). Without success, I tried running the repair tool as well as reloading the software (both overlay and clean reinstall). I would appreciate any help or suggestions to fix?
Post relates to: Palm TX

Hi,
844869 wrote:
CREATE TABLE TEST_EMPLOYEES
FIRST_NAME VARCHAR2(26 CHAR),
GRADE VARCHAR2(5 CHAR)
INSERT INTO TEST_EMPLOYEES (FIRST_NAME, GRADE) VALUES ( 'William', 45 ); ...Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful.
William&45     1
Robin 43     1
Raymond          43     1
Richard          43     1
Karen          28     1
Michelle               1
Jonathan               1
Mark               1
Ann               1You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (such as query results) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
This is one of the many helpful things found in the forum FAQ {message:id=9360002}
Are the results above what you're getting with some existing query, or are they the results you want?
If those are your current results, post your query. In that case, what are the results you want? Do you want this?FIRST_NAME GRADE RNK
William 45 1
Robin 43 2
Raymond 43 2
Richard 43 2
Karen 28 5
Michelle 6
Jonathan 6
Mark 6
Ann 6
Edited by: Frank Kulash on Feb 21, 2013 2:39 PM
I see you've added the desired results to your original message.
Here's one way to do that:SELECT first_name
,     grade
,     RANK () OVER (ORDER BY grade NULLS FIRST)     AS rnk
FROM     test_employees
ORDER BY grade          DESC     NULLS LAST

New iMac (10.9.4) & now my HP Photosmart 6520 "scan to computer" function does not work

Recently upgraded to a new iMac running 10.9.4. Printing works well from this computer and all other devices (iPad, iPhone, etc.). However, the "scan to computer" function does not work. In the "Scan" section of HP Utility when I click on "Scan to Computer" the error message reads "Scan to Computer Cannot Be Enabled. The software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again.
Of course I have done this... twice... still no luck. Also ran Software Update and there was an update, but it made no difference.

Yes, did all that... in order. It did not resolve the problem. However, I did find what appears to be the answer. After re-installing the driver software DO NOT immediately follow the prescribed steps. Instead, quit the installer, restart the Mac, and an Apple software update will appear after restart. Install that software update, and even though the computer and software do not call for it, restart the Mac again. Only then add the printer and follow the balance of the steps. It works! Thank you for your help.

My search function does not work. How can I fix it?

Hello
I need help I just bough a macbook 13 inch, with snow leopard
and the search function does not work.
The window opens but when I write the name i searh it gives me no results.
How can i fix it?
Do i need really to re install all snow leopard?
thanks
pt

Hello paola t & welcome to the forums
I need help I just bough a macbook 13 inch
It may be that Spotlight hasn't completed indexing just yet - is there a dot (indicates busy) inside the magnifying icon top right?
Also, check System Preferences/Spotlight to see what if any exclusions are configured, etc.

Mail search function does not work after reinstalling

Hello!
I recently had to re-install Leopard on my MacBook Pro.
I made a clean install so, I manually copied the Mail folder and preferences from my old home folder to the new one.
All mails are present, and everything works great, apart from the fact that the search function does not work.
I can search for new mails (that came after the reinstall) but the old ones "dont exist" as far as the mail.app goes.
What can I do about it ?

It would probably be easier to do the entire hard drive. The App Store also uses Spotlight, so updating it will help there also. It takes some time to re-index and your computer will/may run slower until it is done.
Direct answer to your question is go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Then go to System Preferences/Spotlight per the linked article and in your user folder, select Library/Mail/V2.
Thanks to leonie for some information contained in this.

Mac Lion. Search function does not work in mails.

Hello,
I already wasted several hours trying to find solution for a problem which appeared with Lion, search function does not work, in mail at least.
I was not using Leopard before and I am not a mac expert.
(search function was already bad in the normal it was already bad in the normal 10.7 set up but at least it was working in mac mails).
I tried reindexing via spotlight privacy settings (adding and removing HD) but does not work much better.
I don't want to go to terminal, as as mentioned I don't know enough about mac to try this.
What to do?
Thanks,
C.

Anyone? Any ideas?

Just downloaded Yosemite and now the swipe feature on my mouse does not work. Why?

Just downloaded the new OS onto my iMAC and now the "swipe" feature on my mouse does not work, i.e. I can't go back and forth between web pages. Is this a function of the new OS?

What kind of mouse do you have? USB? Have you tried to plug it in - try all the USB ports (maybe there is a problem with one). It should automatically detect it.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

The "Delete chromatic color aberration" function does not work

Similar Messages

Maybe you are looking for