The deployment notification failed to reach the Engine

While publishing my bpm project in ProcAdmin of enterprise, the processes within the project are unavailable to the engine.
I get the following error/warning
_'The deployment notification failed to reach the Engine. Please check your Engine's log and restart it. '_
However the deployment status of the project is 'Completely Deployed'
I am attaching the engine error stack trace towards the bottom.
Looks like exception is 'ProcessClassNotAvailableException'
I am very sure the process is proper(and its simple-just one activity with a log statement).
My project consumes few webservices. if i remove the webservices, the project is deployed fine.
Another interesting fact is the same project with webservices deploys and runs fine in the studio.
Please help me with some solution/insight.
thanks,
Error StackTrace
Process '/SampleProcess#Default-1.0' could not be started. Details:\nWARNING: Class 'cmc.SampleProcess.Default_1_0.Instance' invalid for process '/SampleProcess#Default-1.0'. (Process will not be available for clients to use) Detail:Directory ID: cmc/2009-12-14 16:51:00-07:00, Catalog IN: 84, ClassLoader class name: fuego.util.CatalogClassLoader Caused by: cmc.SampleProcess.Default_1_0.Instance fuego.server.exception.ProcessClassNotAvailableException: WARNING: Class 'cmc.SampleProcess.Default_1_0.Instance' invalid for process '/SampleProcess#Default-1.0'. (Process will not be available for clients to use) Detail:Directory ID: cmc/2009-12-14 16:51:00-07:00, Catalog IN: 84, ClassLoader class name: fuego.util.CatalogClassLoader at fuego.metadata.Process.loadProcessClass(Process.java:833) at fuego.metadata.Process.updateClass(Process.java:1198) at fuego.metadata.Process.loadProcess(Process.java:950) at fuego.metadata.Process.initProcess(Process.java:754) at fuego.metadata.Process.forName(Process.java:190) at fuego.server.BaseActiveProcess.getProcess(BaseActiveProcess.java:109) at fuego.server.ActiveProcessImpl.loadMetadata(ActiveProcessImpl.java:1459) at fuego.server.ActiveProcessImpl.loadMetadata(ActiveProcessImpl.java:1444) at fuego.server.ActiveProcessImpl.<init>(ActiveProcessImpl.java:183) at fuego.server.BaseActiveProcess.<init>(BaseActiveProcess.java:54) at fuego.ejbengine.EJBActiveProcess.<init>(EJBActiveProcess.java:48) at fuego.ejbengine.EJBActiveProcess.createAndAddToMaps(EJBActiveProcess.java:66) at fuego.ejbengine.EJBActiveProcessManager.createActiveProcess(EJBActiveProcessManager.java:58) at fuego.server.ActiveProcessManager.handleProcess(ActiveProcessManager.java:434) at fuego.server.ActiveProcessManager$4.execute(ActiveProcessManager.java:334) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:79) at fuego.server.execution.DefaultEngineExecution.executeWithoutComponentImmediate(DefaultEngineExecution.java:185) at fuego.server.execution.EngineExecution.executeWithoutComponentImmediate(EngineExecution.java:86) at fuego.server.ActiveProcessManager.deployProcess(ActiveProcessManager.java:323) at fuego.server.ActiveProcessManager.deployProcess(ActiveProcessManager.java:306) at fuego.server.AbstractEngineManagementImpl.deployProcess(AbstractEngineManagementImpl.java:107) at fuego.server.jmx.mami.JmxEngineManagement.deployProcess(JmxEngineManagement.java:183) at sun.reflect.GeneratedMethodAccessor1340.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:93) at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:27) at com.sun.jmx.mbeanserver.MBeanIntrospector.invokeM(MBeanIntrospector.java:208) at com.sun.jmx.mbeanserver.PerInterface.invoke(PerInterface.java:120) at com.sun.jmx.mbeanserver.MBeanSupport.invoke(MBeanSupport.java:262) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836) at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:447) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:445) at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:443) at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10$1.run(AuthenticatedSubjectInterceptor.java:582) at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10.run(AuthenticatedSubjectInterceptor.java:580) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor.invoke(AuthenticatedSubjectInterceptor.java:573) at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:307) at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1426) at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72) at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1264) at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1366) at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788) at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589) at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.security.service.SecurityManager.runAs(Unknown Source) at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473) at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: java.lang.ClassNotFoundException: cmc.SampleProcess.Default_1_0.Instance at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:247) at fuego.metadata.Process.loadProcessClass(Process.java:820) ... 58 more

Are you on Weblogic? Do you have the 'deployer' deployed to the server?
http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/modules/enterprise/jee/wls/t_Install_Deployer.html
HTH,
-Kevin

Similar Messages

  • The deploy notification can't reach to Engine

    HI all!
    I create a project in BPM 5.7 studio and deploy it in the webconsole, it's all OK.
    Then i export the project(**.exp) and import it into studio 10.3.1,and I modify nothing then export the project with studio 10.3.1.
    I want to deploy the project to the BPM 10gR3(weblogic),but the warning is "the deploy notification can't reach to Engine"!
    How can i resolve the problem?
    Anyone can help me?

    if the project is compiled successfully and deployed, it should be available in workspace provided you did the role-mapping in the correct way to the participant you are using!!
    double check if the participant is assigned with appropriate role
    try restarting server, if everything else is correct and fine!!
    if that is not the case: check the below thread
    Re: Why there is no application in workspace?
    HTH
    Sharma

  • Attachments fail to reach the recipient | Mail 2.1 / 10.4.7

    After the 10.4.7 update, 95% of the attachments I send, fail to reach the recipient. Mac to Mac works just fine, but Windows users fail to recieve the attachments. It all started after I the 10.4.7 update. Somebody told me to change the Message format to Plain text, but that didn't work. I´ve tried several different encodings too.
    This is really starting to annoy me, and I'm thinking of reverting to 10.4.6. I'm having this same problem on several different Macs. I've repaired disk permissions and trashed the Mail plist.
    Before the 10.4.7 update, only a handful of my Windows (clients) recipients had problems recieving the attachments (the fonts would also garbe, scandinavian letters) but now all seem to be affected. I don´t think the problem can be in the recipients end?
    PowerMac Dual Core G5/2,3GHz | 250Gb | SD | 23 Cinema • PB G4/1,67GHz | 15,2 | 8   Mac OS X (10.4.7)   AppleFarmer

    Hi.
    After som extensive testing, I've come to the conclusion, that in my case F-Secure is the culprit. I sent an email to F-Secure and described the problem. They sent me an file, that I could send to my clients. It replaced the old file at this directory: C:\Program Files\F-Secure\FSPS\Program\ >> FSLSP.DLL
    But after this, some clients informed me, that the attachment didn't go awall, but instead they got a virus message. F-Secure Anti-Virus claimed that my PDF was infact a file by the name Trojan-Downloader.Win32.Obfuscated.a
    I'm completely fed up with this problem now. It doesn't matter if I send my messages with Mail or Eudora, Plain text or RTF, the problem is still F-Secure.
    But I've found a solution. By zipping the file, the recipients can recieve the attachment. But the trick is to first move the file into a new folder and zip the folder (for example letter.zip). If I just zip the PDF-file (letter.pdf.zip), then it doesn't work.
    I write a lot on a finnish Mac-forum and there are a lot of users who have this identical problem and the recipients all have F-Secure installed. F-Secure has a lot of users here in Finland.
    http://personal.inet.fi/koti/kimi/virus.jpg [image in finnish]
    PowerMac Dual Core G5/2,3GHz | 250Gb | SD | 23 Cinema • PB G4/1,67GHz | 15,2 | 8   Mac OS X (10.4.7)   AppleFarmer

  • CR2008:Failed to open the connection. Failed to open the connection. Report

    Hi,
    I've just upgraded from Crystal XI R2 to Crystal 2008. All my reports open happily in Crystal 2008. I have also deployed the Crystal 2008 runtime to a Windows 2003 SP2 R2 server running ASP.NET 1 and ASP.NET 2. Before the Crystal 2008 runtime was installed on top of the already present Crystal XI R2 Runtime I could view RPT files via the .NET report viewer (version XI). Now that Crystal 2008 runtime is installed I receive an error message when I try to view the reports, again, via the .NET report viewer (version 12), although no code has changed apart from all references changed from XI to 2008.
    Code is:
    CrystalDecisions.CrystalReports.Engine.ReportDocument oReportDocument = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
                oReportDocument.Load(sReportFilename);
    Tables oTables = oReportDocument.Database.Tables;
                   foreach (CrystalDecisions.CrystalReports.Engine.Table oTable in oTables)
                        TableLogOnInfo crTableLogOnInfo = oTable.LogOnInfo;
                        crTableLogOnInfo.ConnectionInfo.IntegratedSecurity = true;
                        crTableLogOnInfo.ConnectionInfo.DatabaseName = "DB" ;
                        crTableLogOnInfo.ConnectionInfo.ServerName = "server" ;
                        oTable.ApplyLogOnInfo(crTableLogOnInfo);
    CrystalReportViewer1.ReportSource = oReportDocument;
                this.DataBind();
    Error message is: 'Failed to open the connection. Failed to open the connection'.
    Any help would be great.
    Regards
    Tony

    You are correct in that there are no database connectivity changes in CR 2008.
    If you do not have SP0 for CR 2008, download it from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100007528552008E/cr2008_sp0.zip
    If that does not help, I'd like to check if the correct dlls are loading when using CR 2008. To do that, download the modules utility from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
    Then do the following:
    1) unzip the download
    2) Run the app with the CR 2008 references
    3) get the error. leave the error on the screen
    4) Start modules
    5) Go to the File menu, select New List -> Memory Modules
    6) Expand "By process"
    7) Find the app exe (or the .NET dev env)
    8) Click on that
    9) Go to the View menu and select Details
    10) Look to see if there are any dlls loading form the CR XI r2 directory (c:\Program files\Business Objects\Common\3.5\bin)
    Ludek

  • Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.

    Hi
    I am trying to set up an Azure RemoteApp Hybrid solution.
    I have created RemoteApp net and uploaded a custom image and all that is fine.
    When I link my template to my Collection it fails after provisioning for about an hour.
    I recive the following message: Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.
    The join domin works fine and I have tryed with account with different lvl of access to my AD.
    Any suggestion how to solve this?

    Hello Eric,
       I am landing into the same Problem and i read your guidance on this issue. Let me answer it point by point. 
    1. Check the VPN state to ensure it is active or connected state:
    Sundesh:My Azure RemoteApp Virtual Network after successfull S2S configuration shows as Ready. Is that what you mean by Connected State? Earlier to S2S, it was just under connecting state.
    2. Verify your VNET configurations have proper IP address ranges
    Sundesh: The VNET address range, the Local address range and DNS has already been verified twice. In fact the same address ranges(with exception to VNET) are working fine on a VENT config on Azure VM instance. Verified.
    3. Verify your DNS IP configurations are valid, (often this is the problem)
    Sundesh: Yes its done and verified
    4. Verify the credentials entered for domain join are valid.
    Sundesh: Tested these credentials by joining a regular Azure VM to domain and it works there.
    5. Make sure your VPN endpoint that Azure RemoteApp service is connecting to is not blocking traffic.
    Sundesh: Can you please let us know the specific port numbers that we need to consider and i can have it checked with the Network team
    Thanks
    SUndesh

  • RDS 2012 The WinRM service failed to create the following SPNs: Additional Data The error received was 1355

    Hi,
    I have RDS 2012 session deployment in Azure with connection broker high availability.
    The "Remote Desktop Management" service does not start automatically when the connection broker virtual machines are stopped and started.
    I see the below error in event logs of both the connection broker VMs
    Note: WHen i manually start the "Remote Desktop Management" service after this error, it all works without issues.
    I get 
    Error ID 46 - Crash dump initialization failed!
    Warning 10154 - in Microsoft-Windows-Windows Remote Management
    The WinRM service failed to create the following SPNs: 
     Additional Data 
     The error received was 1355

    Hi,
    Thank you for posting in Windows Server Forum.
    In respect to error 46, this issue may occur if the computer boots without a configured dump file. The default dump file is the pagefile. During a clean Windows OS installation, the very first boot will hit this condition as the pagefile has not been set up
    yet. 
    To resolve this issue, you may want complete the paging file configuration.
    More information:
    Event ID 46 logged when you start a computer
    http://support.microsoft.com/kb/2756313/EN-US
    In regards to error 10154, you need to create the SPN specified in the event using the
    setspn.exe utility and also need to grant the “Validated Write to Service Principal Name” permission to the NETWORK SERVICE.
    For more information refer beneath articles.
    Event ID 10154 — Configuration
    http://technet.microsoft.com/en-us/library/dd348559(v=ws.10).aspx
    Domain Controllers Warning Event ID: 10154
    http://srvcore.wordpress.com/2010/01/02/domain-controllers-warning-event-id-10154/
    Hope it helps!
    Thanks,
    Dharmesh

  • CR2008 - Failed to open the connection. Failed to open the connection. ...

    Getting the following error when running CR2008 reports from web server:
    "Failed to open the connection. Failed to open the connection. <report_name>{2585477E-FB02-4594-9DB5-FFBFF2ABE124}.rpt"
    The web server is a Windows Server 2008 x64.  The IIS7 application pool is configured for 32bit, which solved our initial problem.  We are getting the above error if we use either CR2008 or CR2008 SP1.  Same issue with CRRuntime_12_1_mlb.exe.
    If we load CR2008 onto the web server, we can open and run the reports.  Thus, there appears to be no problem with the reports or the data source (an Access database).  Web application runs on development machine (windows xp).
    Why is there a GUID in the report file name?  How can we resolve this issue or what else should we check?
    TIA, Gary.

    Figured it out.  Turns out the ODBC data source name had been setup incorrectly.  Became obvious when stepping through the code.

  • When I sync my iPhone with iTunes I get an error message that says "iTunes could not sync calendars to the iPhone because the sync server failed to sync the iPhone"

    When I sync my iPhone with iTunes I get an error message that says "iTunes could not sync calendars to the iPhone because the sync server failed to sync the iPhone"  How do I fix this?

    I had the same problem.  I found this site http://itprokb.blogspot.com/2010/10/itunes-could-not-sync-calendars-to.html
    It worked for me.  Good luck!

  • I can no longer sync my touch with my computer.  I'm being told that "the sync server failed to sync the iPod."

    I can no longer sync my touch with my computer.  I'm being told that "the sync server failed to sync the iPod."

    Are you sure that these times are still selected to sync in iTunes?
    When you connect your iPad to your PC and with iTunes running, select your iPad under the devices button in the upper right corner of the iTunes window. Then click on the Movies tab and make sure that the movies are selected (checked) to sync. Check the playlists in the Music tab as well.

  • ITunes sync stopped working with my iPhone 5 and Outlook on Windows 7.  Error states in part "because the sync server failed to sync the iphone"

    I have an iPhone 5 running iOS 7.1.2.  I am using iTunes version 11.2.2.3 on Windows 7.  After updating to the new version of iTunes I am currently using, the snyc between my Outlook calendar and phone stopped working.  I get the error "iTunes could not sync the calendars to the phone xxxxx because the sync server failed to sync the iphone"  I followed the instructions here - Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010 - to no avail, with the exception of not re-installing Outlook.  Not an option on my corporate computer.  When I run the Sync test, it says it passes -
    Microsoft Windows 7 Enterprise Edition Service Pack 1 (Build 7601)
    LENOVO 4384AJ9
    iTunes 11.2.2.3
    QuickTime 7.7.5
    FairPlay 2.6.12
    Apple Application Support 3.0.3
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number xxxxxxxxxxx
    Current user is not an administrator.
    The current local date and time is 2014-07-09 21:39:02.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.2.2.3 is currently running.
    iTunesHelper 11.2.2.3 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Device Sync Tests ****
    Sync tests completed successfully.
    Any ideas?

    Try this
    To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

  • Itunes could not sync calendars to the iPhone "TheButler's Phone" because the sync server failed to sync the iPhone, anyone?

    Hi
    This is the error message that I recieve when I try to sync:
    Itunes could not sync calendars to the iPhone "TheButler's Phone" because the sync server failed to sync the iPhone, anyone?
    Everything has worked perfectly for over 1 year, this is an all of a sudden event.
    Thank you,
    Ron

    If using Outlook, follow the directions here:
    http://support.apple.com/kb/TS2776

  • "iTunes could not sync calendars to the iPhone "name" because the sync server failed to sync the iPhone".

    I get the message "iTunes could not sync calendars to the iPhone "name" because the sync server failed to sync the iPhone" every time I sync the iPhone 3GS with iTunes by USB.  Can anyone help? Please !!!!

    I posted the following to "iTunes could not sync calendars to the iPhone "xx" because the sync server failed to sync the iPhone. What does this mean??" at https://discussions.apple.com/message/15820680#15820680
    I haven't seen it mentioned but the secret is to
    Sync only selected calendars
    Select "Remove Calendars" from the popup window
    (This is ambigous: from where are the calendars removed?  From the device being synced to)
    Click apply.
    Oops!  My memory is already gone stale.  I think I left no calendars selected, then clicked apply.  Then I selected the calendars that I wanted, then clicked apply.
    In any case, I had a blank calendar on my iPad and then I had all the updated events that I wanted on my iPad.
    Thanks to all who provided some of the essential clues to resolving this problem.

  • HT1338 PLEASE HELP ME I AM FACING A PROBLEM My name is Ameer. I watch youtube videos from ipad2 ( safari ) today for my first time, when i run a video and i want to pause it, i touch the screen where the video is playing to reach the pause botton that is

    PLEASE HELP ME I AM FACING A PROBLEM
    My name is Ameer.
    I watch youtube videos from ipad2 ( safari )
    today for my first time, when i run a video and i want to pause it, i touch the screen where the video is playing to reach the pause botton that is located on a bar under the video which appears when i touch the screen. Today every time i touch the screen nothing happens and i cannt pause the video nor adjusting its quality.
    So plese help me fixing this problem as soon as posible.
    Regards

    Same problem on my ipad mini, running ios 6.0.2.
    A bit more info:
    -tried using YouTube in Safari on another ipad. Worked fine.
    Tried reboot (sleep + home buttons for 15 seconds). Didn't fix.
    -tried logging out of my YouTube account, thinking the problem was tied to my settings. Didn't fix.
    -tried uninstalling all apps I downloaded since the last time YouTube worked properly. Didn't fix.
    -tried watching a video in desktop mode. Can tap video screen to bring up pause okay in that mode.
    There are work arounds, but the thing I want to know is why YouTube doesn't work in Safari as of a couple of days ago, and is it indicative of another more serious problem with my ipad.

  • Itunes could not sync contacts to the iphone because the sync server failed to sync the iphone

    Hello everyone,
    Today, when I connected my iPhone 4 to itunes, on my PC.. it send me the following message:
    "itunes could not sync contacts to the iphone because the sync server failed to sync the iphone"---
    and then, it stop the process..
    PLEASE help me with this!!, I do not have too much time, I have read a couple of discussion, and nothing is working.
    I'd really appreciate your help,
    Regards,
    Roberto

    Hello rsantanavizcaino
    Start with the article below to troubleshoot issues with Sync Services on your computer.
    Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
    http://support.apple.com/kb/ts2776
    Regards,
    -Norm G.

  • Sync problem: "...because the sync server failed to sync the iPhone."

    The error message in iTunes says:
    "iTunes could not sync calendars to the iPhone "XXXXX's" iPhone because the sync server failed to sync the iPhone."
    Relatively new iPhone, sync was working fine until I installed updates, how bad an idea is that? At any rate, after the updates were installed the calendar won't sync.
    iPhone 4 running 4.1 (8B117)
    WinXP Home running Service Pack 3 and all subsequent updates
    Any suggestions - other than I shoulda bought a Droid?

    Are you using Outlook?
    If using Outlook, follow the directions here:
    http://support.apple.com/kb/TS2776

Maybe you are looking for

  • Windows WILL NOT recognize my nano

    My nano was working fine until I needed to recharge the battery now it alternatively displays sad icon, battery with lightning flash and apple symbol. I have re-installed itunes and ipod updater. I have reset my nano. I have plugged it into every USB

  • Multiple Youtube embedded videos in the same scene

    Hi guys, So, I looked for a AS code in order to embed a Youtube video in a scene. Ok. I found it in the Adobe Forum and it's working like a charm (see bellow). However I have to embed 3 more videos in the same scene. I copied the code and changed the

  • Text search

    Yet I seem not to undestand what's wrong with text searches in a VI. I got a VI, in which there's a string constant, which is a command line in DOS style. This string is something like "C:\Program Files\MySoftware\ABC_2_5_6.exe -f -g" If I perform a

  • Workflow v project

    Hi everebody! 1. Thanks to Doug Winnie and the WorkflowLab team for this new application. 2. I found very interesting the workflow approach very interesting. Nut it's not sufficient for day-to-day use. The project management approach is missing. 3. P

  • Keeping widgets open

    I am sure this has been answered somewhere but I can't find it. How do I keep widgets open on desktop in Leopard? I know how in Tiger but it doesn't work in 10.5 I have also tried TinkerTool to no avail. Even the Radio widget stops playing when the w