The destination message count limit (maxNumMsgs) of 100000 has been reached
So I seem to be getting this error when trying to send JMS messages in Glassfish to a topic after our application has been up and running for about 18 hours. We're using a topic, so a message is being published to the topic and one of two things should be happening if I understand things correctly: 1) Subscribers on the topic should receive a copy of the message, then the message is deleted from the topic or 2) there are no subscribers so the message doesn't get stored in the topic. However, based on the stack trace below, it is quite clear that the topic queueing up messages. The messages we send are non-persistent and the subscribers are non-durable so if no one is listening to the topic there's no reason to queue up the message. And if someone is listening, when the message is sent to the subscriber then it should be removed from the topic. Maybe I'm not understanding how topics work.
Here's the stack trace:
[#|2012-07-18T08:47:58.976-0400|SEVERE|oracle-glassfish3.1.2|javax.jms.Session.mqjmsra|_ThreadID=47;_ThreadName=Thread-2;|MQJMSRA_DS4001: JMSServiceException on send message:sendMessage: Sending message failed. Connection ID: 5710626523942584577|#]
[#|2012-07-18T08:47:58.976-0400|INFO|oracle-glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=47;_ThreadName=Thread-2;|2012-07-18 08:47:58,976 [Session5710626523942588672] ERROR com.foo.ejb.session.RealtimeCacheEJB$RealtimeCacheResourceChangeListener.onMessage(RealtimeCacheEJB.java:328): Failed to resend the resource change message
javax.jms.JMSException: MQJMSRA_DS4001: JMSServiceException on send message:sendMessage: Sending message failed. Connection ID: 5710626523942584577
at com.sun.messaging.jms.ra.DirectSession._sendMessage(DirectSession.java:1844)
at com.sun.messaging.jms.ra.DirectProducer._send(DirectProducer.java:1085)
at com.sun.messaging.jms.ra.DirectProducer.send(DirectProducer.java:453)
at com.foo.jms.JMSPublisher.send(JMSPublisher.java:81)
at com.foo.ejb.session.RealtimeCacheEJB$RealtimeCacheResourceChangeListener.onMessage(RealtimeCacheEJB.java:324)
at com.sun.messaging.jms.ra.DirectSession._deliverMessage(DirectSession.java:1895)
at com.sun.messaging.jms.ra.DirectConsumer.deliver(DirectConsumer.java:369)
at com.sun.messaging.jmq.jmsserver.service.imq.SessionListener.process(IMQDirectService.java:2928)
at com.sun.messaging.jmq.jmsserver.service.imq.SessionListener.run(IMQDirectService.java:2866)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.sun.messaging.jmq.jmsservice.JMSServiceException: sendMessage: Sending message failed. Connection ID: 5710626523942584577
at com.sun.messaging.jmq.jmsserver.service.imq.IMQDirectService.sendMessage(IMQDirectService.java:1955)
at com.sun.messaging.jms.ra.DirectSession._sendMessage(DirectSession.java:1839)
... 9 more
Caused by: com.sun.messaging.jmq.jmsserver.util.BrokerException: [B4120]: Can not add message 800910-192.168.21.136(da:25:a2:a:c8:c6)-1-1342615678976 to destination fooRealtimeChange [Topic]. The destination message count limit (maxNumMsgs) of 100000 has been reached.
at com.sun.messaging.jmq.jmsserver.core.Destination.queueMessage(Destination.java:3202)
at com.sun.messaging.jmq.jmsserver.core.Destination.queueMessage(Destination.java:3087)
at com.sun.messaging.jmq.jmsserver.core.Topic.queueMessage(Topic.java:211)
at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.queueMessage(DataHandler.java:440)
at com.sun.messaging.jmq.jmsserver.data.protocol.ProtocolImpl.processMessage(ProtocolImpl.java:939)
at com.sun.messaging.jmq.jmsserver.service.imq.IMQDirectService.sendMessage(IMQDirectService.java:1948)
... 10 more
Caused by: com.sun.messaging.jmq.util.lists.OutOfLimitsException: Capacity Exceeded was 100001 expected 100000
at com.sun.messaging.jmq.util.lists.SimpleNFLHashMap.put(SimpleNFLHashMap.java:359)
at com.sun.messaging.jmq.util.lists.SimpleNFLHashMap.put(SimpleNFLHashMap.java:291)
at com.sun.messaging.jmq.jmsserver.core.Destination.putMessage(Destination.java:3271)
at com.sun.messaging.jmq.jmsserver.core.Destination.queueMessage(Destination.java:3137)
... 15 more
|#]
If no consumer on the Topic, the message will not be queued to the destination unless it's sent in a transaction in which case it will be cleaned up when the transaction completes if no consumer at time of transaction commit in GlassFish MQ. You can run 'imqcmd list dst', 'imqcmd query dst', 'imqcmd list dur' and 'imqcmd list txn' to check if any other consumer exist on the Topic that caused the messages get queued or held due to incompleted transaction. If there is a consumer client, make sure it's consuming messages and acknowledge messages if using client ack session.
Similar Messages
-
The error message that is received is: Cannont Send Mail; A copy has ben placed in your Outbox. The recipient [email protected] was rejected by the server.
Is this a problem in the way the accounts have been set up or with my local email server?Check the parameters in your email account against what is recommended by your email provider.
Settings > Mail, Contacts, Calendars > account
Have you contacted the support contact at your email provider? -
when I respond to the email message I get the following: Cannot Send Mail -- A copy of this message has been placed in your Outbox. The recipient "[email protected]" was rejected by the server?
when I respond to the email message I get the following: Cannot Send Mail -- A copy of this message has been placed in your Outbox. The recipient "[email protected]" was rejected by the server?
-
I updated to 5.0 today.
Now, when I try to email from my phone, I am block, thwarted, rejected by the following message:
Cannot Send Mail
A copy has been placed in your Out Box. The recipient (enter email here) was rejected by the server.
This happens with my business address. Receiving works.... sending doesn't.
My SBC Global address on this same phone is fine...receiving and sending.
What to do? I'm stressed.
RayHi,
I had the same issue on my iPhone 5S. My internet/email provider told me to uncheck (turn off) USE SSL under Mail settings, and it worked perfectly for me. -
When sending email message appears "sending the message failed because you exceeded your sending limit. A copy has been placed in your outbox"
Who's the provider? Do they have a limit?
https://discussions.apple.com/message/22929931#22929931 -
Turning off new message indicator AND the new message count
Greetings,
Is it possible to turn off both the new message indicator (red asterix) and the new message count?
I would like no message indicators to appear on my blackberry home screen.
Thanks ever so much for your help.I guess I didn't read close enough. I don't think you can turn off the red asterisk. It's going to show up on the icon no matter what.
As for the text messages, I'm not sure the setting for not showing message count indicator applies for text messges. In fact, if you have OS 5, it most likely doesn't as sms is handled much differently.
You can turn off sounds and the red led in Profiles (or Sounds in OS 5)
You're basically wanting to disabl everything the phone was designed to do.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
We have started receiving load report failed error again in one of our production servers. This problem occurred some months ago and on that time we found that in the code reportdocument.close method was not called so we added into the code and set the print job limit to 400 and problem went away for couple of months but now it has started again.
Load report failed.
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at AppSuite.WebApp.CrystalViewer.LoadReport(Boolean bRefresh)
at AppSuite.WebApp.CrystalViewer.Page_Load(Object sender, EventArgs e)
at System.Web.UI.Control.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The maximum report processing jobs limit configured by your system administrator has been reached.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
This is our code
Private m_oReportDocument As New ReportDocument
Private ReadOnly Property ReportId() As Integer
Get
Return Integer.Parse(Me.Request.QueryString("r"))
End Get
End Property
Private Property CacheKey() As String
Get
Dim sCacheKey As String = Me.Request.QueryString("ck")
If sCacheKey Is Nothing OrElse sCacheKey.Length = 0 Then
sCacheKey = CStr(Me.ViewState("CacheKey"))
End If
Return sCacheKey
End Get
Set(ByVal Value As String)
Me.ViewState("CacheKey") = Value
End Set
End Property
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Not Me.IsPostBack Then
LoadReport()
End If
End Sub
Private Sub btnPDF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPDF.Click
'Redirect to the PDF Viewer passing it the ReportId and CacheKey
Me.Response.Redirect(String.Format(ReportHelper.PDFViewerURL, Me.ReportId, Me.CacheKey))
End Sub
Private Sub btnRTF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRTF.Click
'Redirect to the RTF Viewer passing it the ReportId and CacheKey
Me.Response.Redirect(String.Format(ReportHelper.RTFViewerURL, Me.ReportId, Me.CacheKey))
End Sub
Private Sub btnExcel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExcel.Click
'Redirect to the Excel Viewer passing it the ReportId and CacheKey
Me.Response.Redirect(String.Format(ReportHelper.ExcelViewerURL, Me.ReportId, Me.CacheKey))
End Sub
Private Sub crvMain_Navigate(ByVal source As Object, ByVal e As CrystalDecisions.Web.NavigateEventArgs) Handles crvMain.Navigate
LoadReport()
End Sub
Private Sub crvMain_Search(ByVal source As Object, ByVal e As CrystalDecisions.Web.SearchEventArgs) Handles crvMain.Search
LoadReport()
End Sub
Private Sub crvMain_ViewZoom(ByVal source As Object, ByVal e As CrystalDecisions.Web.ZoomEventArgs) Handles crvMain.ViewZoom
LoadReport()
End Sub
Private Sub crvMain_Drill(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillEventArgs) Handles crvMain.Drill
LoadReport()
End Sub
Private Sub crvMain_DrillDownSubreport(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillSubreportEventArgs) Handles crvMain.DrillDownSubreport
LoadReport()
End Sub
Private Sub crvMain_ReportRefresh(ByVal source As Object, ByVal e As CrystalDecisions.Web.ViewerEventArgs) Handles crvMain.ReportRefresh
LoadReport(True)
End Sub
Private Sub LoadReport()
LoadReport(False)
End Sub
Private Sub LoadReport(ByVal bRefresh As Boolean)
If Common.CouldBeMultiDB(User.Identity.Name) AndAlso TypedSession.OverrideCompany.Length > 0 Then
Common.Settings.OverrideCompany = TypedSession.OverrideCompany
End If
'Get the report data
Dim dtReport As DataTable = ReportHelper.GetReportData(Me.CacheKey, bRefresh)
'If there is data to display bind it to the Crystal Viewer
If dtReport.Rows.Count > 0 Then
With m_oReportDocument
.Load(ReportHelper.GetReportPath(Me.ReportId))
.SetDataSource(dtReport)
.PrintOptions.PaperSize = Common.Settings.CrystalPaperSize
End With
crvMain.ReportSource = m_oReportDocument
Else
'Hide the controls and display a message if there is no data
crvMain.Visible = False
btnPDF.Visible = False
btnExcel.Visible = False
lblNoResults.Visible = True
End If
End Sub
Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
m_oReportDocument.Close()
m_oReportDocument.Dispose()
End Sub
Can any one tell if we are doing anything wrong in our code. We don't use sub reports any more however we do use paging and some of our reports have 200+ pages. Also is it possible to find out print job limit and concurrent users by writing some code.
ThanksI suspect it's not the code - after all it worked(?). It is much more likely that, it is the load. Remember that the report engine can only handle three concurrent requests at any one time. Also, remember that you can run out of print jobs real fast as subreports also count as print job. E.g.; say someone added a report that has 4 subreports in the detail section, the report runs a 100 records, you will be at 401 print jobs and thus over the limit. You can keep increasing the print job limit, but that means you are loading the server and eventually you will bring it down too...
It may be time to consider, web farms or Report Application Server to scale up(?).
Getting to the latest SP is never a bad idea either.
And have a look at the scalability suggestions in this doc:
Crystal Reports 2008 Component Engine Scalability
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
The maximum report processing jobs limit configured has been reached -Error
I have Created a common page that has a CrystalReportViewerControl (name of this page is ShowReport.aspx). The report name and database name that required for the report is being passed in a querystring. The database connection info is being pulled from the web.config file. All of the reports that I am dealing with have dynamic parameters and the Crystal Prompt page is automatically being created by the crystal viewer for these. Everything in my application is working fine except that when I try to access any report for the 76th. time I get the following error "The maximum report processing jobs limit configured by your system administrator has been reached."
I have already researched this error and am aware that the PrintJobLimit can be modifed to increase this limit or can be set to -1 if we need to allow unlimited connections. However doing this is not an option due to the degradation of server performance.
The other option that I have tried is to make sure I close and dispose of the report document object on the Page_unload or the page_SavedStateComplete() however on doing so even the session variable that I am using to store the originally created reportdocument is loosing all of the values it requires to display the report. The session variable is still available i.e. it is still of type report document but it has no values for any of the properties like FileName, database etc , basically for all of those properties it show an error "Invalid File Path" when viewed in debug mode.
I have already tried several approaches but with no luck. Every single time I close the originally created ReportDocument object I loose all the required values in the Session
I am using Crystal Report XI R2 , .Net 2.0 and ASP.net
Following is the code: (Any help will be highly appreciated) Thanks:
Option Strict On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Imports System.Data.SqlClient
Imports System.IO
Partial Class _ShowReport
Inherits System.Web.UI.Page
Private FechReport As ReportDocument
Dim strSelectedDatabase As String
Dim strReportsFolderPath As String =
System.Configuration.ConfigurationManager.AppSettings("ReportsFolderPath").ToString()
Dim strReportFileName As String
Dim strReportFullPath As String
Dim iInsertedLogId As Integer 'This variable is used to store the inserted log id for the executed report.
Dim strConnString As String = System.Configuration.ConfigurationManager.AppSettings("ConnString").ToString()
Dim strServerName As String = System.Configuration.ConfigurationManager.AppSettings("CR_ServerName").ToString()
Dim strUserName As String = System.Configuration.ConfigurationManager.AppSettings("CR_UserName").ToString()
Dim strPassword As String = System.Configuration.ConfigurationManager.AppSettings("CR_Password").ToString()
Protected Sub Page_OnSaveStateComplete(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.SaveStateComplete
If IsPostBack Then
If iInsertedLogId > 0 Then
UpdateReportLog_ReportServedTime(iInsertedLogId)
If Not FechReport Is Nothing Then
FechReport.Close()
End If
End If
End If
End Sub
Sub Page_Unload(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Unload
If Not FechReport Is Nothing Then
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
End If
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim sRptFileName As String
If Request.QueryString("database") "" Then
strSelectedDatabase = Request.QueryString("database")
Else
Response.Write("A Valid Database has not been supplied to this page")
Response.End()
End If
If Request.QueryString("ReportFileName") "" Then
strReportFileName = Request.QueryString("ReportFileName")
strReportFullPath = strReportsFolderPath & strReportFileName
Else
Response.Write("A Valid Report has not been supplied to this page")
Response.End()
End If
sRptFileName = strReportFullPath
If Not IsPostBack Then
FechReport = New ReportDocument
If Not FechReport Is Nothing Then
ShowReport(sRptFileName)
End If
Else
If (Session("oReportDocument") Is Nothing) Then
FechReport = New ReportDocument
ShowReport(sRptFileName)
Else
'FechReport = New ReportDocument
'FechReport = CType(Session("oReportDocument"), ReportDocument)
myCrystalReportViewer.ReportSource = Session("oReportDocument")
'myCrystalReportViewer.ReportSource = FechReport
End If
End If
End Sub
Public Function ShowReport(ByVal strReportFileName As String) As Boolean
Dim blNoErrors As Boolean = True
Dim crDatabase As Database
Dim crTables As Tables
Dim crTable As Table
Dim crTableLogOnInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
FechReport.FileName = strReportFileName
myCrystalReportViewer.ReportSource = FechReport
crConnectionInfo = New ConnectionInfo()
With crConnectionInfo
.ServerName = strServerName
.DatabaseName = strSelectedDatabase
.UserID = strUserName
.Password = strPassword
End With
Try
crDatabase = FechReport.Database
crTables = crDatabase.Tables
For Each crTable In crTables
crTableLogOnInfo = crTable.LogOnInfo
crTableLogOnInfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
Catch ex As Exception
Response.Write(ex.Message & ControlChars.NewLine & ex.InnerException.ToString & ControlChars.NewLine)
Exit Function
End Try
Session("oReportDocument") = FechReport
'FechReport.Close()
'FechReport.Dispose()
'GC.Collect()
Return blNoErrors
End Function
End ClassI have looked into Caching the report document as well. However, as you mentioned in the post it, it will only be usefull when the DB and the report parameters remain the same which is not the case in our application. We have multiple identical databases and hundreds of reports. Our users have the option of using a combination of any database and any reports, each report having numerous parameters.
Since one user can only access one report at a time. i do have cleanup code that removes the session variable used to store the reportdocument object in the page that is initially used to call the ShowReport.aspx page.
I understand now that the CR.net SDK is only good for light reporting only. Unfortunately when we started development based on all of the articles that I gathered, I didn't anticipate running to issues like this. But I guess that's the nature of the business :-). And hence there are people like you who go out of the way to answer these difficult questions.
Regards, -
i have a problem in my account every time i want to install application from app Store on my iphone a message shows that my Apple ID has been disabled, i creat a new password and still that message shoes ,what is the problem ?can you help me please???!!!!
If your account is disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.
I have the same issue. Does anybody know why this has happened
-
I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying. How can I fix this error so I can send emails.
The issue definitely sounds like your Outgoing/SMTP settings need to be changed. Simply set them to the proper settings for your provider as was suggested above.
I found this link for Knology: http://support.knology.net/content/email.setup.cfm
The SMTP settings can be edited on the iPad/iPhone by going to Settings--> Mail, Contacts, Calendars, edit the account having trouble, click the Account, then at the bottom is the SMTP server info, click on it to edit it further.
It should allow you to edit the primary smtp server and let you enter all the good stuff as you see in the Knology link above.
Some providers require you to register your account on their service like AT&T. -
I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Lightroom suddenly stopped while I was working in it. I got the Windows message "Adobe Photoshop Lightroom 64 bit has stopped working. A problem caused the program to stop working. I have tried re-booting as well as reinstalling Lightroom 5.7 but whenever I try to start the program I get the same message.
Is that really the exact message you are receiving?
-
I'm trying to update my iphone, but when I download the software update and then when it is "complete" a message pops up stating that it has been timed-outed and to try again later. This is the 5th time i've tried. And i am getting very annoyed. Can anyone help me?
Disable your firewall/security software and try again.
Maybe you are looking for
-
Links from within Firefox windows open new tab, but links within Mail, MSWord, and other apps attempt to open another copy of Firefox, and I get the "Close Firefox: A copy of Firefox is already open. Only one copy of Firefox can be open at a time." T
-
Boot Up Error 0xc0000034 - windows failed to start
I came back from work yesterday and found my laptop displaying a black screen saying that "windows failed to start. A recent hardware or software change might be the cause" and to repair using the windows 7 installation disc. However windows was pre-
-
Mac Mini running slow after Mavericks
Hi All I have a Mac Mini which I upgraded to Mavericks and now it intermittently runs extremely slow - almost at a standstill. I have tried a number of things, such as a complete OSX re-install; I've used MacKeeper to tidy up my junk; I have installe
-
Sort problem on dynamic query !!
Hi, I have a dynamic query written in pl/sql, when I check "Sort" for each field in Report Attribute, error message raised up as "ORA-01785: ORDER BY item must be the number of a SELECT-list expression". If I do not check Sort, it works fine. In my a
-
Hi, I cannot get Lightroom 2.5 to start anymore. I was running 2.4 and upgraded to 2.5. After the upgrade Lightroom was running fine for some time. All of a sudden it failed to start up however. I tried deleting the Lightroom Preferences file but thi