The file access permissions do not allow the specified action

I had an issue while transferring file from source to target..i am able successfully transfer the file to target and later i should move the file to another folder using IO operations.
it failed at invoke.following are the error
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'SynchRead' failed due to: The IO operation failed. The IO operation failed. The "OPER[NOOP][S->R,T->R]" IO operation for "xxxxxxxxxxxxxxxxxx/ xxxxxx.txt" failed. Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
</summary>
</part>
-<part name="detail">
<detail>550 xxxxxxxxxxxxxxxxxxxxxxxxx: The file access permissions do not allow the specified action.
</detail>
</part>
-<part name="code">
<code>550
</code>

>
Prasanna Shanmugasundaram wrote:
> Hi,
> I have the File to JDBC scenario. The file is extracted in AL11 folder of the Sending (BW) system.
> The folder is FTP enabled and the Unix admin says he has given full authorization to both the folder and ftp user.
> But in the File CC I get the following error "Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 TSMSACAIX5350.tar.gz: The file access permissions do not allow the specified action."
>
> Can some one advice what is wrong. Im pretty much sure it has to be a problem with the UNIX permission. But the unix admin person says he has given a full permission.
> I need to know what permissions needs to be given?? Is there different permissions for application level and OS level??
>
> Pls advice
>
> Thanks
> Prasanna
In CC you set ON the delete mode, after processing file? Maybe, the file have read only permission....

Similar Messages

FTP file adapter: file access permissions do not allow the specified action

Hi,
I have the File to JDBC scenario. The file is extracted in AL11 folder of the Sending (BW) system.
The folder is FTP enabled and the Unix admin says he has given full authorization to both the folder and ftp user.
But in the File CC I get the following error "Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 TSMSACAIX5350.tar.gz: The file access permissions do not allow the specified action."
Can some one advice what is wrong. Im pretty much sure it has to be a problem with the UNIX permission. But the unix admin person says he has given a full permission.
I need to know what permissions needs to be given?? Is there different permissions for application level and OS level??
Pls advice
Thanks
Prasanna

>
Prasanna Shanmugasundaram wrote:
> Hi,
> I have the File to JDBC scenario. The file is extracted in AL11 folder of the Sending (BW) system.
> The folder is FTP enabled and the Unix admin says he has given full authorization to both the folder and ftp user.
> But in the File CC I get the following error "Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 TSMSACAIX5350.tar.gz: The file access permissions do not allow the specified action."
>
> Can some one advice what is wrong. Im pretty much sure it has to be a problem with the UNIX permission. But the unix admin person says he has given a full permission.
> I need to know what permissions needs to be given?? Is there different permissions for application level and OS level??
>
> Pls advice
>
> Thanks
> Prasanna
In CC you set ON the delete mode, after processing file? Maybe, the file have read only permission....

HT5071 I'm in the process of publishing my iBook to the iBookstore however when I try to choose the the file to publish I can view it but the file is faded out not allowing me to select it?

I'm in the process of publishing my iBook to the iBookstore however when I try to choose the the file to publish I can view it but the file is faded out not allowing me to select it?

Did you use the Publish menu to export an .ibooks fle?
Check to see if you are trying to mistakenly select an .iba file.

Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file

Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file
How do I fix this?

That would probably be a question best taken up in on a site for Windows support questions. Not knowing anything about the movie you're trying to play, all I can suggest is to confirm that the format of the movie you wish to play is supported in your version of WMP. If it isn't, you'll either need to convert the movie or use some other player software.
Regards.

How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

1. Sync wasn't intended to be used in that manner. You would be better off carrying around a USB Flash Stick with Portable Firefox for use on "strange" PC's.
2. You could open the "Library" {Ctrl + Shift + B} and highlight all those bookmarks and then delete them all at once. But that would also delete all the other bookmarks, and it isn't foolproof. All another person would need to do it to '''''restore''''' a bookmark backup file that has your bookmarks. Beyond that, a new Profile could be created and then the current Profile deleted; but that's "messing with" someone else's computer - an action that is worthy of terminating a friendship over, IMO.
And if that "public" computer was set up properly, Sync should have been disabled.

The file may be corrupt. The file header checksum does not match the computed checksum.

I just put Vista Home Premium on a computer I was going to give to my son. Upon adding some hardware I kept getting the above screen. "The file may be corrupt. The file header checksum does not match the computed checksum.' When I booted in safe mode and slow boot, it hung on crcdisk.sys. I removed everything except the keyboard hhd dvd and fdd and it still does the same thing. I tried to reinstall Vista but it keeps hanging. From reading a lot of other threads this seems to be a big problem. I doubt if the product should have been marketed. But.... If anyone can help me get it booted I would like to try XP instead. I tried to install XP on the same drive and it hungs there too.

Hi ballen6721,
Thank you for the post.
This issue can occur if the newly installed hardware device is incompatible with the system.
Based on the current situation, I suggest trying the following steps to troubleshoot the issue:
Method 1 Device Clean Boot
============================================
Please unplug all unnecessary devices such as sound card, printer, network card and TV card.
Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repair, and then click Next.
8. In the System Recovery Options dialog box, click Startup Repair.
Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
6. At the System Recovery Options Dialog Box, click on System Restore.
7. Follow the System Restore Wizard instruction and choose the appropriate restore point.
8. Click Finish to restore the system.
Note: If you computer is an OEM one, the method to enter WinRE can be different, you may contact your OEM to consult how to enter WinRE.
Can we start the computer now?
If the issue persists, please help confirm the following points:
1. What hardware changes have you made recently?
2. Can we enter Safe Mode now?
I look forward to hearing from you.
Best regards,
Tim Quan
Microsoft Online Community Support

I can't get music to transfer from cd to iTunes. Error occurred while converting the file. You do not have the privilege to make changes.

"Error occured while converting the file. You do not have the privilege to make changes. 27" iMac 2013 late model

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

"the file header checksum does not match the computer checksum." Pavilion P6000

HP Pavilion P6000
Windows 7 64-bit
The file is possible corrupt. The file header checksum does not match the computer checksum
I was previously getting blue screens saying things like "Memory_Management"

I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
Please report results.
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

I added exceptions for the pop up blocker but most of the time it still does not allow the pop ups for the sites I listed as exceptions

the pop up blocker is inconsistent. i added websites to the exceptions list but most of the times when i load firefox it does not allow the exceptions...sometimes it does but i can't find any reason or consistency as to why it sometimes allows them and sometimes doesn't. They are clearly listed on the exceptions option.
What is wrong?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/945652]]</blockquote>

Error occurred while converting the file "". You do not have the privilege

I have recently bought a new MacBook Pro and it's my first mac ever. I have imported all my songs into itunes from an external hard drive where i would keep all my music and video's. I went ahead and added it to my mac and everything plays and works fine but whenever i try to import a cd i get this message Error occurred while converting the file "(Song Title)". You do not have the privilege to make changes." I tried changing the sharing and permission settings on the drive but it won't let me so i have no idea on what to do next. Any help is appreciated!

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

I downloaded ITunes and now I tried to open the file, and it is not supporting the file

I downloaded ITunes on my galaxy s4 and tried to open the file and it says it is not supported

Errr, this is a Adobe Lightroom user to user forum, do you have a question about Lightroom?

JPG fine in Photoshop but error in After Effects: "The file format module could not parse the file (45::36)"

I found a lot of discussion on this error in Photoshop but I'm getting it in After Effects. I have a sequence of JPG images created by photoshop (output is RGB in sRGB color space) and it appears one of them is causing problems in AE. There are several hundred images in the sequence, all created from PS, and only this one is causing problems. I've re-created it several times in PS and the error persists. I've also re-created several others and they're still fine.
I've seen other comments that the issue is with incorrect file formats and CMYK color space. I've confirmed that neither of those is my problem - the file is JPG straight out of PS in RGB. Also, there are several hundred others that are just fine using the same process and "save as" properties...
Any help?
Thanks,
rgames

Have you stripped its metadata in Bridge? Could well be that it contains botched info from the camera. PS carries this through until the bitter end. Alternatively save it with Save for Web choosing to remove metadata.
Mylenium

"The file is possibly corrupt. The file header checksum does not match the computed checksum."

Yesterday evening, I accidentally dropped my Probook 6565b. It bluescreened with strange red boxes around the text, so I thought the screen or something was damaged. I emergency shut down the computer, and started it up again. It was visibly slower, but I was able to use it, so, relieved, I turned it off again and went to bed.
This morning, I tried to turn it on again. It started out normally (and I am able to access the start up screen) . But afterwards, it gives me a blank dark blue screen (like before you see the Windows logo) and it stays there for around 15 seconds before it gives me the error.
I have no idea what to do, so any advice would be greatly appreciated!
I think my operating system is Windows 7, but I'm not sure.
Thank you.

I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
Please report results.
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

My system needs internet explorer for a application I need to down load, however I need to down load the latest yahoo tool bar for internet explorer to work properly and firefox will not allow the down load of yahoo toolbar. How do I fix this?

I have not used Internet explorer since downloading firefox and I need IE for a trading platform that I need to use. In order to get IE working I apparently need to down load the latest version of Yahoo toolbar, however when I try to down load the tool bar Firefox will not allow the down load of that file.

Thank you so much, for once in my computer life I knew what the problem was, what caused it, why it was caused, what it did, what it made it do and most importantly how to fix it and to do it correctly and expeditiously. I can not Thank You all enough for all of the help! I also have Pogo mailed this to all on my friends list, where they have all learned as I have and have fixed theirs also. and the message is being spread. Thank You again, I just can not say it enough.

File sizes listed does not match the downloaded files

I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

The file access permissions do not allow the specified action

Similar Messages

Maybe you are looking for