The File name property is not valid. The file name is a device or contains invalid characters

I have an SSIS task that has run successfully for years. They just moved the dtsx to a new server and now it is failing.
Issue:
The task has a data flow that writes a raw file destination. It then has a subsequent data flow that reads the raw file destination.
The path and name of the raw file is passed to each of the data flows via the same variable.
The raw file resides in a folder on the server in the same path that the dtsx resides in.
The task fails with the "The File name property is not valid. The file name is a device or contains invalid characters" error when trying to access the raw file.
What we have done to troubleshoot:
1. I ran the task successfully on my local machine so it is definitely a server issue.
2. The first thing we were seeing was that it failed trying to write to the raw file. The task is set to "Create Always".
3. We saw that the dba's copied over the entire directory structure from the old server which included a previously created raw file, so we deleted the raw file.
4. We reran the task and it successfully wrote a new raw file but then failed on reading the raw file with the same error as above.
5. We reran the task AGAIN and this time it failed trying to write the raw file throwing the same error as above.
6. The dba looked at the directory and the account that performs the task has full control.
7. The dba looked at the raw file that was created and verified that the account that performs the task has full control of the file and that it is the owner of the file.
Summary:
The task fails when trying to access the file EXCEPT when the file does not exist. In that situation it can write the file but subsequently fails in accessing it again.

Hi Whalensdad,
Based on my research, the issue can be caused by the following reasons:
There are some invalid characters in the File name at package runtime. In this scenario, just as Russ said, could you please post the value that is in the File name variable? Also use a Script Task with Messagebox.show to show the variable values at runtime.
May be it changes to others at run time.
The account runs the package not having access to all the folders in the path. Since you are moving the dtsx file from one server to the current server, do you also move the raw file to the same folder in the current server? Does the user runs the package
have access to all the folders in the path? To solve this, please ensure that the user has access to all folders and the raw file in the path on the current server.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Please see the response above. I can't use a message box on a server so I logged the values to the database. The resource account has full control to the folder. I haven't been able to get the DBA to check the SQL Agents permissions, but I was always under
the impression that if you use "Run As" on the task, it will not use the SQL Agent but the account you identify it to "Run As". The "Run As" account has full control on the folder and file.

Similar Messages

The file name is not valid. The file name is a device or contains invalid characters.

Hi ,
I am getting below error in SSIS 2008 package when it is run through control-m
The file name is not valid. The file name is a device or contains invalid characters.
component "FF_SRC_InboundFidelityInputFile" (1) failed the pre-execute phase and returned error code 0xC020207E.
although this package is working fine in dev environment from visual studio.
control-m agent has proper permissions to the folder still it is failing. Please if anyone knows solution for this issue. I am working on this issue since more than a week but reached nowhere. Please help.
Thanks
Paras Gupta

Hi Paras,
Based on your description, it is not the VS IDE issue, if it is related to the SSIS, I suggest you post the issue in this forum here:http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlintegrationservices
, and there you would get better response.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example,\ /).

I recently upgraded to a new Macbook Air running Lion, from my 2007 white Macbook running Snow Leopard. I had Office for Mac 2004 on the 2007, but had to upgrade to Office for Mac 2011 to be compatible with Lion on the Air. Now when I try to open my documents on the Air that were saved under Office 2004 on the old computer, I get the following message: Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example,\ /).
Any suggestions? Thank you.

Ha,ha,ha.....I figured it out. But for anyone else who's having this problem, it seems that while Office 2004 allowed dates in this format: 00/00/00, Office 2011 doesn't like it at all. I just changed the format in the document names to 00-00-00 and all is well. Documents are opening beautifully!

"The file destination provided is not valid. Enter a valid location."

I'm running Acrobat 9, with all updates installed, on Win XP.
I have used shared review before, and it worked. I click Comments, Send for Shared Review.
When I try to initiate a shared review, I browse to select my pdf, click on the filename, and I immediately get this error message: The file destination provided is not valid. Enter a valid location.
I have tried accessing a file on a shared network behind my company's firewall, on my local hard drive, and my desktop. All three locations generate the exact same error.
I know the "source" file and the "shared" file have to be in two separate locations. The error message is occuring BEFORE I can specify anything else.
Any and all help is greatly appreciated!

I can share a document on Acrobat.com (I just verified this), but I can't send one for shared review. Same error message as before. Curiouser and curiouser!
Date: Wed, 31 Mar 2010 08:13:29 -0600
From: [email protected]
To: [email protected]
Subject: "The file destination provided is not valid. Enter a valid location."
Has the version of Acrobat that you're using been packaged by your IT department? If so, can you find out if they perhaps disabled access to Acrobat.com. Sometimes in doing this, shared reviews are inadvertently disabled.
>

Airdrop: Messages "The Apple ID Certificate of the McBook is not valid. File transfert canceled."

Airdrop:
As I trued to transfert a file from my Imac to my McBook Pro both on Mavericks latest version I got the following message on the Imac : "The Apple ID Certificate of the McBook is not valid. File transfert canceled."
How do I get around this?
Thank you for your help
Kind regards,

i had airdrop issues...
when sending to another machine from my own, the other machine instantly denied the request
when the other machine tried sending to me, it failed with a warning "apple id certificate is invalid"
after calling apple:
go to the apple>preferences>iCloud
log out
log in
do this on BOTH machines
fixed

Channel or repeated capability name specified is not valid for the instrument

I am using the two SCXI-1193 rf switch configured as a Quad 8x1 Mux and I'm using NISE v2.0.1. I have created a hardwire that connects from ch0 of rfSwitch_1 to com0 of rfSwitch_2. So, for example, when I go to create a route from rfSwitch_1 com0 to ch3 of rfSwitch_2, I get the following error:
"Channel or repeated capability name specified is not valid for the instrument."
Why am I getting this error message. It seems to me that since there is a hardwire created between the two rfSwitches there shouldn't be any problems connecting a path from rfSwitch1 to rfSwitch2 between the two quad mux's.
I am using the two SCXI-1193 rf switch configured as a Quad 8x1 Mux and I'm using NISE v2.0.1. I have created a hardwire that connects from ch0 of rfSwitch_1 to com0 of rfSwitch_2. So, for example, when I go to create a route from rfSwitch_1 com0 to ch3 of rfSwitch_2, I get the following error:
"Channel or repeated capability name specified is not valid for the instrument."
Why am I getting this error message. It seems to me that since there is a hardwire created between the two rfSwitches there shouldn't be any problems connecting a path from rfSwitch1 to rfSwitch2 between the two quad mux's.

I am convinced that the IVI configuration is corrupted which prevent you from using the SCXI-1193. If you do not have any hardware you would have had to simulate both SCXI-1193. The fact that you are seing all the channels in NICE virtual device but are getting error when trying to use them tells me that somthing changed in the IV configuration and that you are not using the initial topology used to read all the available channels for the 1193.
If you do not have any hardware connected to your computer then you need to follow the procedure below to ensure that the SCXI-1193 will work as expected.
First create (2) SCXI-1193 simulated in MAX:
1) Right-click Devices and Interfaces and select Create New.
2) A dialog box prompts you to select a device to add. Select NI-DAQmx Simulated Device and click Finish.
3) In the Choose Device dialog box, select Switch>>NI PCI-4021 (the switch controller is not important but you need one to be able to si mulate a chassis).
4) Create a SCXI-1000 Simulated device using the step 1) to 3)
5) Select the device created in 3) as the communicator
6) When the chassi dialog appear, select SCXI-1193 in slot 3 and 4
7) In the chassis Tab select 3: SCXI-1193 as the Communicating SCXI Module Slot. By default the SCXI-1193 are configured as Quad 8x1
Now you can create a NISE virtual device just like if you had (2) SCXI-1193 connected to your computer. Note that logical names and driver sessions have been created for both SCXI-1193 (need to close MAX and reopen) with correct entries. If you follow this procedure you will not encounter any more issue working with simulated hardware.
Guy Ferraro
Switch Product Support Engineer
NI - USA

[svn:fx-3.x] 12937: Updated the logic to not add the toolTip to accessible name property unless there is no accessible name .

Revision: 12937
Revision: 12937
Author:   [email protected]
Date:     2009-12-14 19:51:01 -0800 (Mon, 14 Dec 2009)
Log Message:
Updated the logic to not add the toolTip to accessible name property unless there is no accessible name. This matches the behavior in AccImpl for everything else that actually has an accImpl. This class is used for things like textInput and testArea that do not.
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/accessibility/UIComponentAccPr ops.as

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

XML for Analysis parser: The 'Domain\User' value of the 'EffectiveUserName' XML for Analysis property is not valid.

hi
i have sharepoint 2013 enterprise over sql server 2012 standard, and i want to create some reports trhought excel services and performance point using EffectiveUserName feature, but right actually my environment is not working, when a configure an excel
to read a SSAS cube from my local machine the rol is ok, but when i published the excel and try to update from Internet Explorer this error is presenting
XML for Analysis parser: The Domain\User' value of the 'EffectiveUserName' XML for Analysis property is not valid.
Anybody can helpme is urgent find out for some solution
thanks a lot

Turns out that you need the SP Farm service account to be an admin on the SSAS server as well. That fixed the problem for us.
MS: Please update your documentation :)

The https URL hostname does not match the Common Name (CN) on the server.

Hi,
I am getting the following error while trying to use https with our self-signed certificates.
javax.xml.ws.soap.SOAPFaultException: Marshalling Error: The https URL hostname does not match the Common Name (CN) on the server certificate. To disable this check (NOT recommended for production) set the CXF client TLS configuration property "disableCNCheck" to true.
The above error is the error I get, when I try to use the Web Services using https.
I have added the following lines in cxf.xml but it still doesn't seem to work correctly.
<http-conf:conduit name="*.http-conduit">

<http-conf:tlsClientParameters disableCNCheck="true" />
Kindly let me know on what would be the issue here?.

I had P2V'd a SQL 2008 server and was having this issue. I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM. After searching
for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from. Finally it hit me, maybe it's stored in the master or msdb datatbases.
SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine. All services started
OK on the virtual machine now and affinity was set the way I needed it.

Error submitting form for Distribution: "The filename you specified is not valid because it does not

Error submitting form for Distribution:
"The filename you specified is not valid because it does not include a .pdf extension, contains one or more invalid characters or teh path preceding it refers to a protected system location."
Tried removing dashes from filename, shortenign filename, moving to root directory. No changes. File ends with a .pdf extension.
This is my first attempt to distribute via acrobat.com

I found that I got that same message using Acrobat Professional to send out a document for shared review. I had an exclamation mark in the title of the PDF. When I took out the exclamation mark, it worked.
So maybe try taking out anything "unusual" (parentheses, dashes, exclamation marks, etc.) in the file name and see if that helps.
Good luck,
Philip.

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of g

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .

I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"

The located assembly's manifest definition with name 'openfoundation' does not match the assembly re

Ok. been working on this for the better part of a day. I am having trouble with the .net web controls. trying to create a simple portlet that populates a text box with values from a 2nd text box when a button is selected. both text boxes are in the same portlet.
without using the <httpModules> entry in the web.config file the portlet works fine, but it does pop you out of the portal.
setup: working in a Dev. environment with portal and portlets on the same box.Portal version is 5.0.2.EDK version is 5.0.2.
error:
The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
LOG: DisplayName = openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
(Fully-specified)
LOG: Appbase = file:///c:/inetpub/wwwroot/netTest
LOG: Initial PrivatePath = bin
Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation/openfoundation.DLL.
LOG: Attempting download of new URL file:///c:/inetpub/wwwroot/netTest/bin/openfoundation.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Minor Version
Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
   Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
   Com.Plumtree.Remote.Transformer.Condition.GatewayedStandardCondition.UseFilter(HttpContext ctx)
   Com.Plumtree.Remote.Transformer.FilterManager.UpdateFilter(HttpContext ctx)
   Com.Plumtree.Remote.Transformer.PTTransformer.BeginRequestHandler(Object sender, EventArgs e)
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() +60
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.947
************************************************************Is there any step by step instructions for setting up and using the .net web controls in Plumtree????
There doesn't seem to be any information in one spot as to setting up the environment to use the .Net Web Controls. I have had to piece together information from multipule threads to get this far. I.E. there was nothing in any documentation that I have read that required the installation of the VJ# lib's. (that error took me the first half of the day to resolve :-) )
Thanks for any help,
Greg************************************************************

Also, when reviewing the Plumtree_.NET_Web_Controls_InstallLog.log there were 5 nonfatal erros. These error's were:
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll (The process cannot access the file because it is being used by another process)
When installing the Web Control's do you need to stop any services? I didn't see anything in the install notes about doing this?

The file access permissions do not allow the specified action

I had an issue while transferring file from source to target..i am able successfully transfer the file to target and later i should move the file to another folder using IO operations.
it failed at invoke.following are the error
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'SynchRead' failed due to: The IO operation failed. The IO operation failed. The "OPER[NOOP][S->R,T->R]" IO operation for "xxxxxxxxxxxxxxxxxx/ xxxxxx.txt" failed. Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
</summary>
</part>
-<part name="detail">
<detail>550 xxxxxxxxxxxxxxxxxxxxxxxxx: The file access permissions do not allow the specified action.
</detail>
</part>
-<part name="code">
<code>550
</code>

>
Prasanna Shanmugasundaram wrote:
> Hi,
> I have the File to JDBC scenario. The file is extracted in AL11 folder of the Sending (BW) system.
> The folder is FTP enabled and the Unix admin says he has given full authorization to both the folder and ftp user.
> But in the File CC I get the following error "Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 TSMSACAIX5350.tar.gz: The file access permissions do not allow the specified action."
>
> Can some one advice what is wrong. Im pretty much sure it has to be a problem with the UNIX permission. But the unix admin person says he has given a full permission.
> I need to know what permissions needs to be given?? Is there different permissions for application level and OS level??
>
> Pls advice
>
> Thanks
> Prasanna
In CC you set ON the delete mode, after processing file? Maybe, the file have read only permission....

Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.

Hi, i'm a Windows 7 user of HP Pavilion dm4.
It has been weeks since iTunes works properly on my computer. I'm here to seek help from professionals or people who had encountered it before. Whenever I double-click on iTunes, it prompt me a message "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." But another thing is, i'm the only adminstrator on this laptop. If I don't have permission, who has? Sigh.
I had tried uninstalling and installing iTunes from official website many times but to no avail.

Hi,
Also, please make sure your current user is a administrator account and have permission to open the file.
Right-click the file or folder, and then click Properties.
Click the Security tab.
Under Group or User names, click your name to see the permissions you have.
Have you installed 3rd software in you computer? please turn off them temporarily to check if this issue still occurs.
Here is an article you can refer to.
http://support.microsoft.com/kb/2669244
Andy Altmann
TechNet Community Support

Pretzel: The located assembly's manifest definition with name 'openfoundation' does not match the

We have got 5.0.2 Plumtree portal, EDK 5.0.2 and .Net Web Controls 2.1.
I am trying to call:
IPortletContext oPortletContext = PortletContextFactory.CreatePortletContext(System.Web.HttpContext.Current.Request, System.Web.HttpContext.Current.Response);
I have attached the error I am getting. Is this related to Open Foundation version? This is quite urgent because we are in the process of trying to get a demo together for grabbing Activity Rights.
Server Error in '/portlets/DOJ/JNET/pretzel.clients.doj.reentry' Application.
The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
LOG: DisplayName = openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
(Fully-specified)
LOG: Appbase = file:///E:/Data/HSTPRDAPP01/Inetpub/plumtree/portlets/DOJ/JNET/pretzel.clients.doj.reentry
LOG: Initial PrivatePath = bin
Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portlets_doj_jnet_pretzel.clients.doj.reentry/26128f6f/cfc1837a/openfoundation.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portlets_doj_jnet_pretzel.clients.doj.reentry/26128f6f/cfc1837a/openfoundation/openfoundation.DLL.
LOG: Attempting download of new URL file:///E:/Data/HSTPRDAPP01/Inetpub/plumtree/portlets/DOJ/JNET/pretzel.clients.doj.reentry/bin/openfoundation.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Minor Version
Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
   Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
   pretzel.clients.doj.reentry.navigation.Page_Load(Object sender, EventArgs e) in \\devnet2\inetpub\doj\reentry\development\pretzel.clients.doj.reentry\navigation.aspx.cs:22
   System.Web.UI.Control.OnLoad(EventArgs e) +67
   System.Web.UI.Control.LoadRecursive() +35
   System.Web.UI.Page.ProcessRequestMain() +750
Version Information: Microsoft .NET Framework Version:1.1.4322.1031; ASP.NET Version:1.1.4322.947

I have seen this before after a upgrade of the EDK, found I had to remove the reference in the C# project to the old EDK dll and re add it to the new EDK dll.
Also noticed that you are using the System.Web.HttpContext.Current fully qualified namespace in the CreatePortletContext() call instead of the usual way of PortletContextFactory.CreatePortletContext(Request, Response) this uses the System.Web.HttpRequest.Page namespace by default.

The File name property is not valid. The file name is a device or contains invalid characters

Similar Messages

Maybe you are looking for