The FIP-FS Scan Process failed initialization

Hello,
I am on exchange CU7 update and trying to get anti-malware and spam to work.  I am constantly seeing the crashing of the FIP-FS service showing The FIP-FS Scan Process failed initialization. Error: 0x800706BE. Error Details: The remote procedure
call failed.  Event ID 1106.  I am also getting constant app crashes of the scanningprocess.exe showing 
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: scanningprocess.exe
P2: 15.0.1044.24
P3: 546fc941
P4: scanningprocess.exe
P5: 15.0.1044.24
P6: 546fc941
P7: c0000005
P8: 000000000005a8f6
P9: 
P10: 
I have confirmed that updates are downloading for the malware database, but the services themselves are crashing for some reason.  I have checked what settings I know about for spam and anti-malware and have run out of options.  My FIP-FS service
is terminating about once every 8 min so it's killing me in trying to figure out what is wrong.

Ok. Perhaps you used any policy System Center Endpoint Protection
Policy for OU Exchange Server or Domain.
PS. In some cases, when a large flow of messages melvare filters and DLP can take up to 4 GB of memory for each filter. I do not know how many users you have in the postal system and its architecture, but it is recommended 24 GB of memory on the server
for production environments.
 http://blogs.technet.com/b/exchange/archive/2013/05/14/released-exchange-2013-server-role-requirements-calculator.aspx
PS. If you are using DLP, this module also uses ScanningProcess.exe
Anti-Virus Software in the Operating System on Exchange Server
ScanEngineTest.exe
%ExchangeInstallPath%FIP-FS\Bin
Content scanning component that's used by the Malware agent and DLP.
Mailbox servers
ScanningProcess.exe
%ExchangeInstallPath%FIP-FS\Bin
Content scanning component that's used by the Malware agent and DLP.
Mailbox servers
MCITP, MCSE. Regards, Oleg

Similar Messages

  • Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

    When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
    (I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

    @John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
    Provided:
    1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
    2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
    ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
    InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
    Maybe other readers in this forum could test for these cases…
    Uwe

  • Message processing failed, FTP Receiver Adapter error...

    Hello all,
    We have a Idoc to File(FTP) scenario using PI.
    When PI try to send the file out to the FTP site, we get the following message in the communication channel monitoring and the file never reach the FTP site:
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
    When we look at the detail display, we can see that the connection as been establish with the FTP site but the adapter is unable to deliver the file...
    Any Idea why?
    Thanks in advance.

    Hi ,
    There are two things that you can do
    1- check the connection of FTP from command prompt. If it is acceebile from command prompt then check for authorization that wether you have access to post the file at FTP or not (Full access READ , WRITE and EXCECUTE)
    2- in your adpater change the connection mode from Per file transfer to "Permanent".
    Please feel free to reply on this thread if you are not able to.
    Thanks

  • Message processing failed in XML parser

    This is IDoc to file integration. When I test (WE19), I did not put any value in the 'Quantity' field (which is 6 characters long).In the message mapping I put a condition to see if the value is empty then put zero, and it did not give any error. I have given all the fixed field lengths in the file adapter but still getting the following error:
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value 'TABLERO DE CONTROL' too long (>6 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value 'TABLERO DE CONTROL' too long (>6 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)'

    When I enter value in the 'Quantity' field, the integration works fine. The value 'tablero de control' is the 'Description'  which is the next field. My Content Conversion is like;
    Field1, Field2, Quantity, Description
    (where Field1 and Field2 are mandatory and Quantity and Description are optional)
    When I provide all 4 values, the integration work just fine, when I do not provide 'Quantity' it fails.

  • Why does a BPM Process fail at the Start Activity?

    Hello All,
    We're currently working on a Dev environement (WLS 10.3), where we're experiencing issues with BPM Processes that fail at the start node. The error observed is a "Null Pointer Exception" despite there definteily being parameters passed into the process.
    I've observed the trace in the EM after invoking the process and notice that the process fails as soon as it enters the start activity.
    One of the possible explanations could be an out of memory issue. Has anyone experienced this before?
    BPM : SOA Suite 11g.
    Thank you.

    If you have memory - issues, you should look at the Weblogic-logs.

  • The analyze process failed to complete correctly.

    Hi,
    I have customer who has a problem with ZPM 10.3.2. The error is "The analyze process failed to complete correctly.{}". Analyze.exe dies and shows message on workstation. I found TID 7009369 in which is explained that fix has been added to the ZENworks Patch Management subscription.
    It is also stated :
    "If you are still experiencing this error, ensure that you have the most current Patch Management updates applied (including updated remediate.exe and analyze.exe files)."
    All workstations have ZCM 10.3.2 agent installed. Does that means that we should apply ZCM 10.3.3 patch to the zone and maybe "ZCM 11.0 and 10.3.3 - remediate error patch - see TID 7008538" (NOVELL: Downloads - ZCM 11.0 and 10.3.3 - remediate error patch - see TID 7008538) patch ?
    Is it possible to use "ZCM 11.0 and 10.3.3 - remediate error patch - see TID 7008538" on ZCM 10.3.2 agents ? I know that has been some changes to the patch remediate function in ZCM 10.3.3 (patch scheduling) ...
    Regards,
    Ivan

    Iuuuuan,
    the 10.3.3 files have not been tested against 10.3.2, but they should
    work; if all goes well, though, we will have a new remediate and
    analyze this week; I've been too busy working at BrainShare last week
    to finish creating the patch, but it's high priority now.
    Shaun Pond

  • I'm attempting to install cs6 and after hitting install the following message appeared: installer failed to initialize. please download adobe support advisor to detect the problem. well that has been discontinued...

    i'm attempting to install cs6 and after hitting install the following message appeared: installer failed to initialize. please download adobe support advisor to detect the problem. well that has been discontinued...

    rename OOBE Folder to OOBE.old.
    to find OOBE:
    64 bit OS: Program Files x86\Common Files\Adobe\OOBE
    32 bit OS: Program Files \Common Files\Adobe\OOBE

  • SNC Processing Failed starting the SAProuter

    Dear Experts,
    i have finished the configuration of SAProuter, while running the router i am getting the error "SNC Processing Failed." here may dev_rout file is
    The command that i'm using is:
    D:\usr\sap\saprouter>saprouter.exe -r -S 3299 -K "p:CN=SSAP00001PBBI, OU=0000893
    577, OU=SAProuter, O=SAP, C=DE"
    trc file: "dev_rout", trc level: 1, release: "700"
    *     ERROR          SNC processing failed:
    *               sncInit
    *     TIME          Thu Sep 25 10:40:38 2008
    *     RELEASE          700
    *     COMPONENT     NI <network interface>
    *     VERSION          38
    *     RC          -17
    *     MODULE          nisnc.c
    *     LINE          646
    *     DETAIL          NiSncInit: sncrc=-1
    *     counter          3
    What is the error here?
    Thanks a lot
    Edited by: Daniel Humberto Ramirez on Sep 25, 2008 6:31 PM

    Hi, this is the dev_rout file,
    Thanks a lot!!!.
    trc file: "dev_rout", trc level: 1, release: "700"
    Mon Sep 29 09:01:29 2008
    SAP Network Interface Router, Version 38.10
    command line arg 0:     saprouter.exe
    command line arg 1:     -r
    command line arg 2:     -S
    command line arg 3:     3299
    command line arg 4:     -K
    command line arg 5:     p:CN=SSAP00001PBBI, OU=0000893577, OU=SAProuter, O=SAP, C=DE
    SncInit(): Initializing Secure Network Communication (SNC)
          PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/64/64)
    SncInit(): Trying environment variable SNC_LIB as a
          gssapi library name: "D:\usr\sap\saprouter\ntintel\sapcrypto.dll".
    Mon Sep 29 09:01:30 2008
    ERROR => DlLoadLib: LoadLibrary(D:\usr\sap\saprouter\ntintel\sapcrypto.dll) Error 193 [dlnt.c       237]
    ERROR => SncPDLInit(): DlLoadLib("D:\usr\sap\saprouter\ntintel\sapcrypto.dll")=DLENOACCESS
    [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) D:\usr\sap\saprouter\ntintel\sapcrypto.dll not loaded
    [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
             sec_avail = "false"
    ERROR => NiSncInit: SncInit failed (rc=-1) [nisnc.c      647]
    ERROR => main: NiSncInit failed (rc=-17) [nirout.cpp   1219]
    ERROR       SNC processing failed:
                        SncInit
    TIME                Mon Sep 29 09:01:30 2008
    RELEASE        700
    COMPONENT   NI (network interface)
    VERSION         38
    RC                   -17
    MODULE         nisnc.c
    LINE                646
    DETAIL            NiSncInit: sncrc=-1
    COUNTER        3
    <<- ERROR: SncDone()==SNCERR_INIT_FIRST

  • Report deployment process failed to request management pack list from SQL RS Server. The operation will be retried.

    I am encountering following event log in SC2012 Operations Manager and Reporting Tab is not loading in Operations Console.
    Report deployment process failed to request management pack list from SQL RS Server. The operation will be retried.
    Exception 'WebException': The request failed with HTTP status 401: Unauthorized.

    Hi,
    Can you acess http://reportserver/reports from a web browser on the OpsMgr server?
    Moreover,you can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot
    as necessary if it fails to connect.
    For more information, please review the link below:
    The easy way to test SQL connectivity
    http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Initializing the Installing Process fails at 50%

    I currently use adobe reader 9.5.2 and receive messages that version XI is available now. I tried to update my version fpr at least 20 times and the initializing program for the installing process always fails at 50 %, even when I deactivate my Norton Security software. Can anybody tell me what to do?

    It worked ! Thanks a lot for Your help!
    Greetings from Germany  
    "Pat Willener" <[email protected]> schrieb:
    Re: Initializing the Installing Process fails at 50%
    created by Pat Willener in Adobe Reader - View the full discussion
    Download the installer from http://get.adobe.com/reader/enterprise/
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5360144#5360144
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Initializing the Installing Process fails at 50%
    To unsubscribe from this thread, please visit the message page at Re: Initializing the Installing Process fails at 50%. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
    Andreas Barton
    [signature removed by host]

  • When I "share" to DVD the file is transcoded.  When it reaches 66% it starts to "finishing", but the process stops and does not proceed beyond 66%.  When I stop the sharing process I receive the following message "the share operation dvd has failed".

    When I "share: to DVD the file is transcoded.  When the sharing process gets to 66%, it changes to "finishing" "CreateDVD:waiting fro create disk to finish.  The sharing process does no go beyond 66%, and when I stop the sharing process, I receive the message "the share DVD operation has failed."
    Is this a problem with FCPX or Create DVD?  How can this problem be resolved?

    The handshake between FCP and a hidden app called Create Disk wasn't completed.
    Try this. Select a short range and Share>DVD. In Output Settings. set it to Hard Drive to save as a disk image. (Save to your Desktop so you can find it.) For menu Background, click the Add button, then cancel. That is often enough to wake up the disk burning part of this process. If it makes a disk image, try a physical disk.
    Russ

  • HT4623 update process fails with the following message "Unable to Verify Update.  iOS 6.1 failed verification because you are no longer connected Internet."

    my iphone 5 is connected to a wi-fi network and i'm able to browse the web and receive emails.  however when i try to update the software the process fails with the following message "Unable to Verify Update.  iOS 6.1 failed verification because you are no longer connected Internet." It gives an open to "Close" or "Try again", but the retry is also unsuccessful.

    Try to connect to secure web site. If you can't, that would mean that your iphone is unable to authenticate itself to apple servers in order to download update. If you can - I would still guess same but with less certainty and suggest to update on another network.

  • HT6196 When I try to "share" my movie project via "File" the process "fails after a short while.  I do not know why this is happening.  I want to send my movie file to IDVD so I can burn a DVD disc of my project.

    When I try to "share" my IMovie project via "File", the process "fails", after a short time.  I am following the instuctions;  Click share>file>next > except it hasn't download to save.  The blue circle never completes its circle before I says it failed.  What am I doing wrong?

    Are you trying to transfer it from the iPad to your desktop?  Have you tried AirDrop?

  • BACKUP LOG suddenly failed with Msg 35250, Level 16, State 11 The connection to the primary replica is not active. The command cannot be processed.

    I have AlwaysOn SQL 2012 Enterprise set-up using Windows Failover Clustering Services (not FCI), and have 1 Primary node (P), 1 Synchronous Commit Auto Failover (SC), and 1 Asynchronous Commit Manual Failover (AC) node.  It is set up to prefer secondary,
    with the highest priority given to AC node.
    I am using Ola Hollengren's scripts for Database Maintenance jobs, including a native BACKUP LOG job for the transaction logs of all user databases on a 1 minute schedule.  His scripts already consider AlwaysOn, and although the job is set-up on all
    3 nodes, only ever runs on AC node.
    The job has been running successfully since initial set-up almost 1 year ago, but suddenly yesterday morning started to fail with the following error, only on 1 of the 13 databases in my availability group:
    Date and time: 2014-06-08 09:36:11
    Command: BACKUP LOG [my_db] TO DISK = N'E:\MSSQL\\Transaction Dumps\my_db\MySQLCL$MySQLAG_my_db_20140608_093610_U_LOG.trn' WITH CHECKSUM, COMPRESSION
    Msg 35250, Level 16, State 11, Server AC, Line 1
    The connection to the primary replica is not active.  The command cannot be processed.
    Msg 3013, Level 16, State 1, Server AC, Line 1
    BACKUP LOG is terminating abnormally.
    Outcome: Failed
    Duration: 00:01:00
    The other 12 databases continued to backup successfully.
    Checking the Availability Group dashboard, windows event logs, and SQL Server error logs, including Failover Cluster events showed no issues.
    However, monitoring software (Idera SQLdm) showed blocked sessions on P node.  When I ran sp_who2, it showed that a background process was being blocked by another background process with an HADR BACKUP LOCK.
    Since both processes were background processes, I was unable to kill either process.  I temporarily disabled the transaction log backup job, but the blocked process was still active.
    I ran DBCC CHECKDB (my_db) WITH all_errormsgs, no_infomsgs, data_purity on both P and AC nodes, with no errors.  However, on AC node, it also showed 1 transaction rolled forward and 0 transactions rolled back.  This also had the effect of releasing
    the blocked background process, but another background process was now blocking with the same HADR BACKUP LOCK.
    I tried to restart SQL Server Agent on AC node, which did not immediately seem to work.  However, after a few minutes, I noticed that the block had disappeared.  I re-enabled the transaction log backup job on AC and it started working normally
    again.  The error has not occurred again, but I am at a loss as to what happened, and how to prevent it from happening again.
    Any help would be greatly appreciated.
    Diane

    And here is part 2 of the stored procedure:
    --// Execute backup commands //--
    WHILE EXISTS (SELECT * FROM @tmpDatabases WHERE Selected = 1 AND Completed = 0)
    BEGIN
    SELECT TOP 1 @CurrentDBID = ID,
    @CurrentDatabaseName = DatabaseName,
    @CurrentDatabaseNameFS = DatabaseNameFS,
    @CurrentDatabaseType = DatabaseType
    FROM @tmpDatabases
    WHERE Selected = 1
    AND Completed = 0
    ORDER BY ID ASC
    SET @CurrentDatabaseID = DB_ID(@CurrentDatabaseName)
    IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
    BEGIN
    IF EXISTS (SELECT * FROM sys.database_recovery_status WHERE database_id = @CurrentDatabaseID AND database_guid IS NOT NULL)
    BEGIN
    SET @CurrentIsDatabaseAccessible = 1
    END
    ELSE
    BEGIN
    SET @CurrentIsDatabaseAccessible = 0
    END
    END
    ELSE
    BEGIN
    SET @CurrentIsDatabaseAccessible = 0
    END
    SELECT @CurrentDifferentialBaseLSN = differential_base_lsn
    FROM sys.master_files
    WHERE database_id = @CurrentDatabaseID
    AND [type] = 0
    AND [file_id] = 1
    -- Workaround for a bug in SQL Server 2005
    IF @Version >= 9 AND @Version < 10
    AND EXISTS(SELECT * FROM sys.master_files WHERE database_id = @CurrentDatabaseID AND [type] = 0 AND [file_id] = 1 AND differential_base_lsn IS NOT NULL AND differential_base_guid IS NOT NULL AND differential_base_time IS NULL)
    BEGIN
    SET @CurrentDifferentialBaseLSN = NULL
    END
    SELECT @CurrentDifferentialBaseIsSnapshot = is_snapshot
    FROM msdb.dbo.backupset
    WHERE database_name = @CurrentDatabaseName
    AND [type] = 'D'
    AND checkpoint_lsn = @CurrentDifferentialBaseLSN
    IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
    BEGIN
    SELECT @CurrentLogLSN = last_log_backup_lsn
    FROM sys.database_recovery_status
    WHERE database_id = @CurrentDatabaseID
    END
    SET @CurrentBackupType = @BackupType
    IF @ChangeBackupType = 'Y'
    BEGIN
    IF @CurrentBackupType = 'LOG' AND DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') <> 'SIMPLE' AND @CurrentLogLSN IS NULL AND @CurrentDatabaseName <> 'master'
    BEGIN
    SET @CurrentBackupType = 'DIFF'
    END
    IF @CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL AND @CurrentDatabaseName <> 'master'
    BEGIN
    SET @CurrentBackupType = 'FULL'
    END
    END
    IF @CurrentBackupType = 'LOG'
    BEGIN
    SELECT @CurrentLatestBackup = MAX(backup_finish_date)
    FROM msdb.dbo.backupset
    WHERE [type] IN('D','I')
    AND is_damaged = 0
    AND database_name = @CurrentDatabaseName
    END
    IF @Version >= 11 AND @Cluster IS NOT NULL
    BEGIN
    SELECT @CurrentAvailabilityGroup = availability_groups.name,
    @CurrentAvailabilityGroupRole = dm_hadr_availability_replica_states.role_desc
    FROM sys.databases databases
    INNER JOIN sys.availability_databases_cluster availability_databases_cluster ON databases.group_database_id = availability_databases_cluster.group_database_id
    INNER JOIN sys.availability_groups availability_groups ON availability_databases_cluster.group_id = availability_groups.group_id
    INNER JOIN sys.dm_hadr_availability_replica_states dm_hadr_availability_replica_states ON availability_groups.group_id = dm_hadr_availability_replica_states.group_id AND databases.replica_id = dm_hadr_availability_replica_states.replica_id
    WHERE databases.name = @CurrentDatabaseName
    END
    IF @Version >= 11 AND @Cluster IS NOT NULL AND @CurrentAvailabilityGroup IS NOT NULL
    BEGIN
    SELECT @CurrentIsPreferredBackupReplica = sys.fn_hadr_backup_is_preferred_replica(@CurrentDatabaseName)
    END
    SELECT @CurrentDatabaseMirroringRole = UPPER(mirroring_role_desc)
    FROM sys.database_mirroring
    WHERE database_id = @CurrentDatabaseID
    IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_primary_databases WHERE primary_database = @CurrentDatabaseName)
    BEGIN
    SET @CurrentLogShippingRole = 'PRIMARY'
    END
    ELSE
    IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_secondary_databases WHERE secondary_database = @CurrentDatabaseName)
    BEGIN
    SET @CurrentLogShippingRole = 'SECONDARY'
    END
    -- Set database message
    SET @DatabaseMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Database: ' + QUOTENAME(@CurrentDatabaseName) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Status: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') AS nvarchar) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Standby: ' + CASE WHEN DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Updateability: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Updateability') AS nvarchar) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'User access: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') AS nvarchar) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Is accessible: ' + CASE WHEN @CurrentIsDatabaseAccessible = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Recovery model: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') AS nvarchar) + CHAR(13) + CHAR(10)
    IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group: ' + @CurrentAvailabilityGroup + CHAR(13) + CHAR(10)
    IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group role: ' + @CurrentAvailabilityGroupRole + CHAR(13) + CHAR(10)
    IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Is preferred backup replica: ' + CASE WHEN @CurrentIsPreferredBackupReplica = 1 THEN 'Yes' WHEN @CurrentIsPreferredBackupReplica = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
    IF @CurrentDatabaseMirroringRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Database mirroring role: ' + @CurrentDatabaseMirroringRole + CHAR(13) + CHAR(10)
    IF @CurrentLogShippingRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Log shipping role: ' + @CurrentLogShippingRole + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Differential base LSN: ' + ISNULL(CAST(@CurrentDifferentialBaseLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Differential base is snapshot: ' + CASE WHEN @CurrentDifferentialBaseIsSnapshot = 1 THEN 'Yes' WHEN @CurrentDifferentialBaseIsSnapshot = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Last log backup LSN: ' + ISNULL(CAST(@CurrentLogLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = REPLACE(@DatabaseMessage,'%','%%') + ' '
    RAISERROR(@DatabaseMessage,10,1) WITH NOWAIT
    IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
    AND NOT (DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') = 'SINGLE_USER' AND @CurrentIsDatabaseAccessible = 0)
    AND DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 0
    AND NOT (@CurrentBackupType = 'LOG' AND (DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') = 'SIMPLE' OR @CurrentLogLSN IS NULL))
    AND NOT (@CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL)
    AND NOT (@CurrentBackupType IN('DIFF','LOG') AND @CurrentDatabaseName = 'master')
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'N' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'Y' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'DIFF' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'N' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'Y' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
    AND NOT ((@CurrentLogShippingRole = 'PRIMARY' AND @CurrentLogShippingRole IS NOT NULL) AND @CurrentBackupType = 'LOG')
    BEGIN
    -- Set variables
    SET @CurrentDate = GETDATE()
    IF @CleanupTime IS NULL OR (@CurrentBackupType = 'LOG' AND @CurrentLatestBackup IS NULL) OR @CurrentBackupType <> @BackupType
    BEGIN
    SET @CurrentCleanupDate = NULL
    END
    ELSE
    IF @CurrentBackupType = 'LOG'
    BEGIN
    SET @CurrentCleanupDate = (SELECT MIN([Date]) FROM(SELECT DATEADD(hh,-(@CleanupTime),@CurrentDate) AS [Date] UNION SELECT @CurrentLatestBackup AS [Date]) Dates)
    END
    ELSE
    BEGIN
    SET @CurrentCleanupDate = DATEADD(hh,-(@CleanupTime),@CurrentDate)
    END
    SELECT @CurrentFileExtension = CASE
    WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'FULL' THEN 'bak'
    WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'DIFF' THEN 'bak'
    WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'LOG' THEN 'trn'
    WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'FULL' THEN 'bak'
    WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'DIFF' THEN 'bak'
    WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'LOG' THEN 'trn'
    WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'FULL' THEN 'sqb'
    WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'DIFF' THEN 'sqb'
    WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'LOG' THEN 'sqb'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'N' THEN 'hbc'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'N' THEN 'hbc'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'N' THEN 'hbc'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'Y' THEN 'hbe'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'Y' THEN 'hbe'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'Y' THEN 'hbe'
    WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'FULL' THEN 'safe'
    WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'DIFF' THEN 'safe'
    WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'LOG' THEN 'safe'
    END
    INSERT INTO @CurrentDirectories (ID, DirectoryPath, CreateCompleted, CleanupCompleted)
    SELECT ROW_NUMBER() OVER (ORDER BY ID), DirectoryPath + CASE WHEN RIGHT(DirectoryPath,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END, 0, 0
    FROM @Directories
    ORDER BY ID ASC
    SET @CurrentFileNumber = 0
    SET @CurrentMirrorFilePath = NULL
    WHILE @CurrentFileNumber < @NumberOfFiles
    BEGIN
    SET @CurrentFileNumber = @CurrentFileNumber + 1
    SELECT @CurrentDirectoryPath = DirectoryPath
    FROM @CurrentDirectories
    WHERE @CurrentFileNumber >= (ID - 1) * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories) + 1
    AND @CurrentFileNumber <= ID * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories)
    SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
    IF LEN(@CurrentFilePath) > 257
    BEGIN
    SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
    END
    IF @CurrentFileNumber = 1 AND LEN(@MirrorDirectory) > 0
    BEGIN
    SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
    IF LEN(@CurrentFilePath) > 257
    BEGIN
    SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
    END
    END
    INSERT INTO @CurrentFiles (CurrentFilePath)
    SELECT @CurrentFilePath
    SET @CurrentDirectoryPath = NULL
    SET @CurrentFilePath = NULL
    END
    -- Create directory
    WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateCompleted = 0)
    BEGIN
    SELECT TOP 1 @CurrentDirectoryID = ID,
    @CurrentDirectoryPath = DirectoryPath
    FROM @CurrentDirectories
    WHERE CreateCompleted = 0
    ORDER BY ID ASC
    SET @CurrentCommandType01 = 'xp_create_subdir'
    SET @CurrentCommand01 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_create_subdir N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''' IF @ReturnCode <> 0 RAISERROR(''Error creating directory.'', 16, 1)'
    EXECUTE @CurrentCommandOutput01 = [dbo].[CommandExecute] @Command = @CurrentCommand01, @CommandType = @CurrentCommandType01, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
    SET @Error = @@ERROR
    IF @Error <> 0 SET @CurrentCommandOutput01 = @Error
    IF @CurrentCommandOutput01 <> 0 SET @ReturnCode = @CurrentCommandOutput01
    UPDATE @CurrentDirectories
    SET CreateCompleted = 1,
    CreateOutput = @CurrentCommandOutput01
    WHERE ID = @CurrentDirectoryID
    SET @CurrentDirectoryID = NULL
    SET @CurrentDirectoryPath = NULL
    SET @CurrentCommand01 = NULL
    SET @CurrentCommandOutput01 = NULL
    SET @CurrentCommandType01 = NULL
    END
    -- Perform a backup
    IF NOT EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateOutput <> 0 OR CreateOutput IS NULL)
    BEGIN
    IF @BackupSoftware IS NULL
    BEGIN
    SELECT @CurrentCommandType02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP_DATABASE'
    WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP_LOG'
    END
    SELECT @CurrentCommand02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
    WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
    END
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
    SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
    SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
    IF @Compress = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION'
    IF @Compress = 'N' AND @Version >= 10 SET @CurrentCommand02 = @CurrentCommand02 + ', NO_COMPRESSION'
    IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
    IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
    IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
    IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
    IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
    END
    IF @BackupSoftware = 'LITESPEED'
    BEGIN
    SELECT @CurrentCommandType02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'xp_backup_database'
    WHEN @CurrentBackupType = 'LOG' THEN 'xp_backup_log'
    END
    SELECT @CurrentCommand02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_database @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
    WHEN @CurrentBackupType = 'LOG' THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_log @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
    END
    SELECT @CurrentCommand02 = @CurrentCommand02 + ', @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand02 = @CurrentCommand02 + ', @with = '''
    IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
    IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
    IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
    IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
    SET @CurrentCommand02 = @CurrentCommand02 + ''''
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @read_write_filegroups = 1'
    IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CAST(@CompressionLevel AS nvarchar)
    IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @buffercount = ' + CAST(@BufferCount AS nvarchar)
    IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @maxtransfersize = ' + CAST(@MaxTransferSize AS nvarchar)
    IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
    IF @Throttle IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @throttle = ' + CAST(@Throttle AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
    IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @cryptlevel = ' + CASE
    WHEN @EncryptionType = 'RC2-40' THEN '0'
    WHEN @EncryptionType = 'RC2-56' THEN '1'
    WHEN @EncryptionType = 'RC2-112' THEN '2'
    WHEN @EncryptionType = 'RC2-128' THEN '3'
    WHEN @EncryptionType = '3DES-168' THEN '4'
    WHEN @EncryptionType = 'RC4-128' THEN '5'
    WHEN @EncryptionType = 'AES-128' THEN '6'
    WHEN @EncryptionType = 'AES-192' THEN '7'
    WHEN @EncryptionType = 'AES-256' THEN '8'
    END
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing LiteSpeed backup.'', 16, 1)'
    END
    IF @BackupSoftware = 'SQLBACKUP'
    BEGIN
    SET @CurrentCommandType02 = 'sqlbackup'
    SELECT @CurrentCommand02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
    WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
    END
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
    SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
    SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
    IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
    IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
    IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION = ' + CAST(@CompressionLevel AS nvarchar)
    IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', THREADCOUNT = ' + CAST(@Threads AS nvarchar)
    IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
    IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', KEYSIZE = ' + CASE
    WHEN @EncryptionType = 'AES-128' THEN '128'
    WHEN @EncryptionType = 'AES-256' THEN '256'
    END
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand02,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLBackup backup.'', 16, 1)'
    END
    IF @BackupSoftware = 'HYPERBAC'
    BEGIN
    SET @CurrentCommandType02 = 'BACKUP_DATABASE'
    SELECT @CurrentCommand02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
    WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
    END
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
    SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
    SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
    IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
    IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
    IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
    IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
    IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
    END
    IF @BackupSoftware = 'SQLSAFE'
    BEGIN
    SET @CurrentCommandType02 = 'xp_ss_backup'
    SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_backup @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
    SELECT @CurrentCommand02 = @CurrentCommand02 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    IF @CurrentMirrorFilePath IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @mirrorfile = N''' + @CurrentMirrorFilePath + ''''
    SET @CurrentCommand02 = @CurrentCommand02 + ', @backuptype = ' + CASE WHEN @CurrentBackupType = 'FULL' THEN '''Full''' WHEN @CurrentBackupType = 'DIFF' THEN '''Differential''' WHEN @CurrentBackupType = 'LOG' THEN '''Log''' END
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @readwritefilegroups = 1'
    SET @CurrentCommand02 = @CurrentCommand02 + ', @checksum = ' + CASE WHEN @CheckSum = 'Y' THEN '1' WHEN @CheckSum = 'N' THEN '0' END
    SET @CurrentCommand02 = @CurrentCommand02 + ', @copyonly = ' + CASE WHEN @CopyOnly = 'Y' THEN '1' WHEN @CopyOnly = 'N' THEN '0' END
    IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CASE WHEN @CompressionLevel = 5 THEN N'ispeed' WHEN @CompressionLevel = 6 THEN N'isize' ELSE CAST(@CompressionLevel AS nvarchar) END
    IF @RetryWrites IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @retrywrites = N''' + @RetryWrites + ''''
    IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
    IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptiontype = N''' + CASE
    WHEN @EncryptionType = 'AES-128' THEN 'AES128'
    WHEN @EncryptionType = 'AES-256' THEN 'AES256'
    END + ''''
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptedbackuppassword = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLsafe backup.'', 16, 1)'
    END
    EXECUTE @CurrentCommandOutput02 = [dbo].[CommandExecute] @Command = @CurrentCommand02, @CommandType = @CurrentCommandType02, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
    SET @Error = @@ERROR
    IF @Error <> 0 SET @CurrentCommandOutput02 = @Error
    IF @CurrentCommandOutput02 <> 0 SET @ReturnCode = @CurrentCommandOutput02
    END
    -- Verify the backup
    IF @CurrentCommandOutput02 = 0 AND @Verify = 'Y'
    BEGIN
    IF @BackupSoftware IS NULL
    BEGIN
    SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
    SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
    SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
    END
    IF @BackupSoftware = 'LITESPEED'
    BEGIN
    SET @CurrentCommandType03 = 'xp_restore_verifyonly'
    SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_restore_verifyonly'
    SELECT @CurrentCommand03 = @CurrentCommand03 + ' @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ', @with = '''
    IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
    SET @CurrentCommand03 = @CurrentCommand03 + ''''
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying LiteSpeed backup.'', 16, 1)'
    END
    IF @BackupSoftware = 'SQLBACKUP'
    BEGIN
    SET @CurrentCommandType03 = 'sqlbackup'
    SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
    SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand03,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLBackup backup.'', 16, 1)'
    END
    IF @BackupSoftware = 'HYPERBAC'
    BEGIN
    SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
    SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
    SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
    END
    IF @BackupSoftware = 'SQLSAFE'
    BEGIN
    SET @CurrentCommandType03 = 'xp_ss_verify'
    SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_verify @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
    SELECT @CurrentCommand03 = @CurrentCommand03 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLsafe backup.'', 16, 1)'
    END
    EXECUTE @CurrentCommandOutput03 = [dbo].[CommandExecute] @Command = @CurrentCommand03, @CommandType = @CurrentCommandType03, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
    SET @Error = @@ERROR
    IF @Error <> 0 SET @CurrentCommandOutput03 = @Error
    IF @CurrentCommandOutput03 <> 0 SET @ReturnCode = @CurrentCommandOutput03
    END
    -- Delete old backup files
    IF (@CurrentCommandOutput02 = 0 AND @Verify = 'N' AND @CurrentCleanupDate IS NOT NULL)
    OR (@CurrentCommandOutput02 = 0 AND @Verify = 'Y' AND @CurrentCommandOutput03 = 0 AND @CurrentCleanupDate IS NOT NULL)
    BEGIN
    WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CleanupCompleted = 0)
    BEGIN
    SELECT TOP 1 @CurrentDirectoryID = ID,
    @CurrentDirectoryPath = DirectoryPath
    FROM @CurrentDirectories
    WHERE CleanupCompleted = 0
    ORDER BY ID ASC
    IF @BackupSoftware IS NULL
    BEGIN
    SET @CurrentCommandType04 = 'xp_delete_file'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
    END
    IF @BackupSoftware = 'LITESPEED'
    BEGIN
    SET @CurrentCommandType04 = 'xp_slssqlmaint'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_slssqlmaint N''-MAINTDEL -DELFOLDER "' + REPLACE(@CurrentDirectoryPath,'''','''''') + '" -DELEXTENSION "' + @CurrentFileExtension + '" -DELUNIT "' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + '" -DELUNITTYPE "minutes" -DELUSEAGE'' IF @ReturnCode <> 0 RAISERROR(''Error deleting LiteSpeed backup files.'', 16, 1)'
    END
    IF @BackupSoftware = 'SQLBACKUP'
    BEGIN
    SET @CurrentCommandType04 = 'sqbutility'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqbutility 1032, N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''', N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + CASE WHEN @CurrentBackupType = 'FULL' THEN 'D' WHEN @CurrentBackupType = 'DIFF' THEN 'I' WHEN @CurrentBackupType = 'LOG' THEN 'L' END + ''', ''' + CAST(DATEDIFF(hh,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'h'', ' + ISNULL('''' + REPLACE(@EncryptionKey,'''','''''') + '''','NULL') + ' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLBackup backup files.'', 16, 1)'
    END
    IF @BackupSoftware = 'HYPERBAC'
    BEGIN
    SET @CurrentCommandType04 = 'xp_delete_file'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
    END
    IF @BackupSoftware = 'SQLSAFE'
    BEGIN
    SET @CurrentCommandType04 = 'xp_ss_delete'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_delete @filename = N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + '\*.' + @CurrentFileExtension + ''', @age = ''' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'Minutes'' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLsafe backup files.'', 16, 1)'
    END
    EXECUTE @CurrentCommandOutput04 = [dbo].[CommandExecute] @Command = @CurrentCommand04, @CommandType = @CurrentCommandType04, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
    SET @Error = @@ERROR
    IF @Error <> 0 SET @CurrentCommandOutput04 = @Error
    IF @CurrentCommandOutput04 <> 0 SET @ReturnCode = @CurrentCommandOutput04
    UPDATE @CurrentDirectories
    SET CleanupCompleted = 1,
    CleanupOutput = @CurrentCommandOutput04
    WHERE ID = @CurrentDirectoryID
    SET @CurrentDirectoryID = NULL
    SET @CurrentDirectoryPath = NULL
    SET @CurrentCommand04 = NULL
    SET @CurrentCommandOutput04 = NULL
    SET @CurrentCommandType04 = NULL
    END
    END
    END
    -- Update that the database is completed
    UPDATE @tmpDatabases
    SET Completed = 1
    WHERE Selected = 1
    AND Completed = 0
    AND ID = @CurrentDBID
    -- Clear variables
    SET @CurrentDBID = NULL
    SET @CurrentDatabaseID = NULL
    SET @CurrentDatabaseName = NULL
    SET @CurrentBackupType = NULL
    SET @CurrentFileExtension = NULL
    SET @CurrentFileNumber = NULL
    SET @CurrentDifferentialBaseLSN = NULL
    SET @CurrentDifferentialBaseIsSnapshot = NULL
    SET @CurrentLogLSN = NULL
    SET @CurrentLatestBackup = NULL
    SET @CurrentDatabaseNameFS = NULL
    SET @CurrentDatabaseType = NULL
    SET @CurrentDate = NULL
    SET @CurrentCleanupDate = NULL
    SET @CurrentIsDatabaseAccessible = NULL
    SET @CurrentAvailabilityGroup = NULL
    SET @CurrentAvailabilityGroupRole = NULL
    SET @CurrentIsPreferredBackupReplica = NULL
    SET @CurrentDatabaseMirroringRole = NULL
    SET @CurrentLogShippingRole = NULL
    SET @CurrentCommand02 = NULL
    SET @CurrentCommand03 = NULL
    SET @CurrentCommandOutput02 = NULL
    SET @CurrentCommandOutput03 = NULL
    SET @CurrentCommandType02 = NULL
    SET @CurrentCommandType03 = NULL
    DELETE FROM @CurrentDirectories
    DELETE FROM @CurrentFiles
    END
    --// Log completing information //--
    Logging:
    SET @EndMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120)
    SET @EndMessage = REPLACE(@EndMessage,'%','%%')
    RAISERROR(@EndMessage,10,1) WITH NOWAIT
    IF @ReturnCode <> 0
    BEGIN
    RETURN @ReturnCode
    END
    END
    GO
    ALTER AUTHORIZATION ON [dbo].[DatabaseBackup] TO SCHEMA OWNER
    GO
    Diane

  • ORA-20000: The summarization process failed

    Dear All,
    I have executed one Concurrent Request in Projects Module. Which is ends with ERROR. I have checked Log file of that Concurrent Request and it contains message as
    ORA-20000: The summarization process failed. Please contact your system administrator.
    Please help me on this issue.This is 11.5.10.2 and having database version as 9.2.06
    Regards,
    S.Kiran Kumar

    This must be related to EBS... an exception between -20000 and -20999 is user defined... so I suggest you contact your System Administrator ;)

Maybe you are looking for

  • Logical Join

    I would like to know how to create a logical join between fact table and dimension table which exist already in the Business Model and Mapping. I mean that I know how to show the Business Model Diagram of a fact table, but I don't know how to add a d

  • Can't get FT to work

    Wow a lot of people seem to have the same or similar problems and a lot of solutions are total chinese to me ! FT works fine on my small MacBook but refuses to work on the MBPro. Can't even acces the pref file (grayed out) The camera appears in the V

  • Use of resource-env-ref tag

    Hi, Can anybody tell me what is the use of the resource-env-ref tag. I am using resourec-ref tag where I have specified a jdbc datasource configuration. But I do not know what does resource-env-ref do? Does it add any extra feature to the resource-re

  • Web Template 3.x - Excel Export

    Hello experts, how can I add some kind of "Excel-Export-Button" in a Web Template 3.x ? In WAD 7.0 there is this function, but what about WAD 3.x? Thanks in advance.

  • Billing data about new sales organization

    Hi,experts,    I create a new sale organizaiton,and config the corresponding configuration,after billing,I can not find the related data using tcode mcsi sales info s903,and I find the table s903 ,there is no data in the table. I don't know where is