The headphone input makes noise whenever I connect any headphone. The noise comes out of headphones but the problem exists in the port.

The headphone input makes noise (radio signal noise like) whenever I connect any headphone. The noise comes out of headphones but the problem exists in the port.

1. Reset PRAM.  http://support.apple.com/kb/ph14222
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Similar Messages

  • Does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please!

    does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please! thanx

    Work through all the troubleshooting here: iTunes: Advanced iTunes Store troubleshooting
    B-rock

  • TS1814 what about if I have a mac but am experiencing the same prompt? "iTunes could not contact the iPod software update server because you are not connected to the Internet. Make sure your Internet connection is active and try again."

    I have a mac but am experiencing the same prompt? "iTunes could not contact the iPod software update server because you are not connected to the Internet. Make sure your Internet connection is active and try again."

    Hey ksgrech,
    I found the following information which may be of assistance in troubleshooting this error on a Mac:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    Furthermore, you may want to refer to this article (error 3194):
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Cheers!,
    Matt M.

  • There was a problem connecting to the printer. Make sure it's connected and try again

    A test page prints ok. However when I come to print any document I get this message:
    "There was a problem connecting to the printer. Make sure it's connected and try again"
    I have uninstalled the printer and re-installed it and rebooted my computer. Still printing a tet page but won't print anything else.

    Hi @davifels,
    Welcome to the HP Forums!
    I see that you are getting the error message, "there was a problem connecting to the printer. Make sure it's connected and try again." With your HP Envy 4500 printer running on Windows 8.1 (64-bit). I am sorry to hear this, but happy to help!
    For further assistance, I will need the following information:
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies. Copy Text or Mixed Documents.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    If the printer can print from NotePad.
    In the meantime, please take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8.
    Hope this guide helps, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HT201436 Most of the time my phone as not network connection any goes to voicemail

    I find few big problem on my phone
    -1 Most of the time my phone as not network connection and goes to voicemail
    -2 when I call  and I talk I find the call has been cut the words and also I heard half of the words of the person is calling me !!
    I hope you can help me
    My colleagues from work they thinking I did not want answer the calls
    Is very annoying me
    Thank you

    Do you see any toolbars at all?
    Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
    *https://support.mozilla.org/kb/how-to-use-full-screen
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
    *Firefox menu button > Options
    *View > Toolbars (press F10 to display the menu bar)
    *Right-click empty toolbar area
    Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
    *check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette into the Customize window to the Bookmarks Toolbar
    *if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
    You can check for problems caused by a corrupted localstore.rdf file if the above didn't help.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Very new to photoshop I am trying to make changes to a photo and set it up as a smart object but after selecting smart object, the checkerboard appears and my photo dissppears

    Very new to photoshop I am trying to make changes to a photo and set it up as a smart object but after selecting smart object, the checkerboard appears and my photo dissppears

    Hello, thank you so much for your response! Here are some screenshots of my steps taken

  • Ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help

    ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it

    lol ok nvm i fixed it

  • Trying to use headphones to watch a show online...  sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

    trying to use headphones to watch a show online...  sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

    trying to do this on a macbook pro...please help

  • Just tried to import CD in my iTunes music library, but get this error code "error occurred while converting file. You do not have the privilege to make changes"....any thoughts? Have not tried to change anything- only import CD ??

    Just tried to import a new CD into my iTunes music library, but get this error code "error occurred while converting file. You do not have the privilege to make changes"....any thoughts? Have not tried to change anything- only import CD ??

    Do you have read& write permissions to your iTunes library?
    See this thread: Re: "Error has occurred... You do not have the privilege to make changes."

  • After downloading the latest Itunes software, I can't connect any device to Itunes!

    After downloading the latest Itunes software, I can't connect any device to Itunes. I am using windows 7!

    i am using windows 8 and still can't find my iphone on itunes

  • Hi! I want to connect my Jabra easygo Bluetooth device with my iPad but iPad is not detecting the Bluetooth device

    Hi! I want to connect my Jabra easygo Bluetooth device with my iPad but iPad is not detecting the Bluetooth device

    Hi Usmanfarooq83,
    Here is an article of troubleshooting for bluetooth devices and iPad:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers!
    - Ari

  • My daughters Ipod .7, the facetime keeps saying, Could not sign in, please check your network connection or try again. I checked the network on it, and it says connected. any other options?

    My daughters Ipod .7, the facetime keeps saying, Could not sign in, please check your network connection or try again. I checked the network on it, and it says connected. any other options?

    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • I have not been able to open up Lightroom on my computer for over a year now. Whenever I double click on it, this comes up - can anyone help? Problem signature:   Problem Event Name:APPCRASH   Application Name:lightroom.exe   Application Version:3.4.1.10

    I have not been able to open up Lightroom on my computer for over a year now. Whenever I double click on it, this comes up - can anyone help? Problem signature:   Problem Event Name:APPCRASH   Application Name:lightroom.exe   Application Version:3.4.1.10

    First thing to try is the latest version of Lightroom (currently 5.6). If it don't crash, then problem solved - upgrade.
    If Lr5 won't run on your machine, then Lr4 instead.
    If both Lr5 and Lr4 crash on your machine, then at least you know it's a not a Lightroom version problem but something wonked in your system.
    If you can't figure out how to resolve the crash on the system you have, then it's time for a new system (or try another converter/editor app).
    PS - A few things to try:
    * After re-installing new version, if that doesn't fix it, then get rid of all Lightroom-related data files (rename them so they can be restored), in case problem is in Lr data file.
    * Remove all non-essential hardware in case problem is hardware/driver.
    * Startup up machine with minimal software services.
    * If still no go, consider updating driver software, including mainboard drivers and/or bios firmware if need be.
    * Of course run all the system hardware and software diagnostics you can - problem could be failing disk or ram..
    * Check system event logs for any clues.
    If you don't know how to do some of these things - ask.
    Do not say "you've tried everything" unless you want a lecture - there is most definitely something you haven't tried. It's like when you can't find your car keys - you haven't looked everywhere -  there is somewhere you haven't looked!
    PS - Has Lightroom EVER worked on your machine? what's changed since then..
    Good luck,
    Rob

  • Field ZZBUDAT is delta-relevant, but does not exist in the field list

    Hi All,
    I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
    So i have enhanced the datasource now that date is coming in my datasource.
    But when i tried to make delta on that date field its showing error-
    Field ZZBUDAT is delta-relevant, but does not exist in the field list
    Message no. R8279
    Diagnosis
    The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
    Now how i can make this field dalta relevant?
    Thanks,
    Piyush

    Piyush,
    I think the message in SAP is quite clear....
    If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
    The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
    Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
    The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

Maybe you are looking for