The Health Service could not log on the RunAs account ...event ID 7000 Health Service

Hello everyone,
While using the Web Application Transaction Monitoring to monitor certain websites using specific credentials, this Event 7000 occures on the Watcher Nodes which happen to be also Management Servers.
Here are the details:
The Run As Accounts used are Windows account types.
They have been tested on the websites and are correct.
In the Distribution the More Secure option is selected but no object is present. They are used only for web monitoring.
The Web Application in WATM is using NTLM as the authentication method.
In Monitoring, the web application appears healthy as it is working properly and is being correctly monitored.
In Profiles there is a User Authentication Action Account profile created automatically and has the Run As Account. It is scoped to the management server which is also the watcher node for the web application.
The problem:
On the management server acting as a Watcher Node for the web application, in the OpsMgr log the event ID 7000 is recorded, causing a trigger for a monitor that changes the health of the Management Server to Warning. The monitor should automaticaly resolve
when all Run As Accounts are validated.
Any ideeas on how to resolve this issue without overriding the monitor?
Thanks,
Marius
http://mariusene.wordpress.com/

The SCOM Run As Account wizard does not allow me to specify the basic/simple/digest type account in the form domain\username. I belive the website uses Windows integrated (NTLM) authentication so there is no workaround but to create a Windows
Account type in SCOM.
I just dont want the Health Service to try to validate the run as account locally on the watcher node because its in a different domain.
I suppose in this case a disable of the monitor for those watcher nodes is the only solution?
http://mariusene.wordpress.com/

Similar Messages

ICal could not log into the caldav server

Hi,
I have a OS X Lion server that i am trying to set up for home. I have made an account for myself and have got mail running for it but when I go to turn on Calendars and Reminders, i get the error message iCal could not log into the caldav server "me.com". One I am not sure how this has anything to do with me but anyway, the mail compnent works. Also when i go to the folder webdav via browser servername/webdav/ i get permission denied. I also get and Unathorized message when I try to specifically access the calendar via adress https://servername:8443/calendars/users/username/ I mention the permission denied stuff because i am assuming they are all connected to the Calendar service (ie it runs on caldav which runs on webdav). can anyone help with this as I would like to get this working.

One possiblity is that the user you created has not been granted access to the calendar service. How did you create the user on the server, via Server.app?
Are you able to browse to https://servername:8443/principals/users/username/ (of course substituting the appropriate server and user names)

I changed my name on MacBook pro, I could not log in after that though the password is unchanged but tHe name appeared on the login window is the original name?..how I can log in?

I changed my name on MacBook pro, I could not log in after that though the password is unchanged but tHe name appeared on the login window is the original name?..how I can log in?

Hmmm. Maybe try this?
OS X: Changing or resetting an account password

7016 - The Health Service cannot verify the future validity of the RunAs account

Hi,
We have several gateways set up on our other domains (DMZ, Test and Dev) using certificates to connect to the RMS with a few agents reporting to the gateway in it's domain. I am recieving this warning for all gateways and agents that are being monitored (in the other domains). All our servers are either Win 2003 32bit or Win 2003 64bit.
The Health Service cannot verify the future validity of the RunAs account PRODUCTION\username for management group PRODMGMT due to an error retrieving information from Active Directory (for Domain Accounts) or the local security authority (for Local Accounts). The error is The network path was not found.(0x80070035).
From the searching that I've done on the net, a couple of people have mentioned that if you set the password expiration flag on AD users and computers for the account the problem will go away.. This hasn't happened for me.
I have checked the logs on the gateway servers and they report the following messages:
Event Type: Error
Event Source: HealthService
Event Category: Health Service
Event ID: 7016
Date:  15/03/2010
Time:  6:05:25 AM
User:  N/A
Computer: DEMOMMS003
Description:
The Health Service cannot verify the future validity of the RunAs account PRODUCTION\username for management group PRODMGMT due to an error retrieving information from Active Directory (for Domain Accounts) or the local security authority (for Local Accounts). The error is The network path was not found.(0x80070035).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Warning
Event Source: HealthService
Event Category: Health Service
Event ID: 7020
Date:  15/03/2010
Time:  6:05:25 AM
User:  N/A
Computer: DEMOMMS003
Description:
The Health Service has validated all RunAs accounts for management group PRODMGMT, except those we could not monitor.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
However a few hours later I don't get any error messages and it seems to be working happily.
Event Type: Information
Event Source: HealthService
Event Category: Health Service
Event ID: 7026
Date:  15/03/2010
Time:  9:02:28 AM
User:  N/A
Computer: DEMOMMS003
Description:
The Health Service successfully logged on the RunAs account PRODUCTION\username for management group PRODMGMT
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Information
Event Source: HealthService
Event Category: Health Service
Event ID: 7023
Date:  15/03/2010
Time:  9:02:28 AM
User:  N/A
Computer: DEMOMMS003
Description:
The Health Service has downloaded secure configuration for management group PRODMGMT successfully.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Information
Event Source: HealthService
Event Category: Health Service
Event ID: 7025
Date:  15/03/2010
Time:  9:02:28 AM
User:  N/A
Computer: DEMOMMS003
Description:
The Health Service has authorized all configured RunAs accounts to execute for management group PRODMGMT.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Information
Event Source: HealthService
Event Category: Health Service
Event ID: 7024
Date:  15/03/2010
Time:  9:02:28 AM
User:  N/A
Computer: DEMOMMS003
Description:
The Health Service successfully logged on all accounts for management group PRODMGMT
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Despite the successful logs that appear the gateway still shows up with the same warning.
If i stop and start the service on the gateway it then shows up as healthy in SCOM, but then the next day it the warning comes back.
Is the problem caused by different domain acounts and when it tries to find it in the domain it can't find it?
Cheers,
Phil

I also have the same problem with my scom 2012 system.
I am getting 7021 and 7016 events.
as mentioned by Jonathan, i am able to open notepad with the user account for which we are getting error.
another thing noted, when we run setspn -l domain\acc , we are getting error
Ldap Error(0x51 -- Server Down): ldap_open
or
FindDomainForAccount: Call to DsGetDcNameWithAccountW failed with return value 0x00000525
Could not find account DOMAIN/account
Another point to add, my server is ABC.XXX.company.com and acc i am using us YYY\acc_name. I mean to say my account is of diff domain.
This config is working fine no issues at all in another server which was setup earlier with 2007 r2.
Manish
I recently had the same issue in our Forest. Did you try YYY.company.com\acc_name? If you use the netbios name, setspn (and scom does on account validation as well, if you just pick the domainname from the list) will try to resolve the dc via netbios. Two
alternatives: add the other domain to the dns searchlist for your network adapter (I won't do this one, this does not resolve the cause of the problem) or configure your action accounts with fqdn [email protected] The funny thing is, in scom event
you will see scom validated account "\[email protected]" (still add's the backslash)
Correction: this did not solve the issue as mentioned before, the error reappeared again... :(

PCNS -- forest Subdomain -- the SPN you Specified could not be found on any accounts in this domain

Hello there Fim lovers,
i'm having few issues with PCNS hope you can help out,
so my Active directory Infrastrucutre is made out of a Root Domain "company.net" and lots of subdomains
"sub1.company.net", "sub2.company.net" ....
the FIM Server and service accounts are all in the Root domain and my users are in the subdomains as is the case usually...
i ran the setspn on the service account in the root domain then ran the pcnscfg on the subdomain DC where my users are stored...
i get the following warning :
The Service Principal Name you specified could not be found on any accounts in this domain. (which is normal since the service account is in the root domain)
did i do smthn wrong ? or can i ignore this warning ?
thanks for any help !!!
Hitch Bardawil

Hi,
Check this note - KBA 1671522, it holds good for RFC also.
Arun

Could not dereference object when running the EJB

Hi,
I want to reference my jsp page to EJB but get a "could not dereference object" upon running the jsp with this as it went into the catch exception instead of looking up to the EJB:
Part of my jsp codes in jspinit( ):
try {
objref = initial.lookup("java:comp/env/ejb/MyMusicCart");
System.out.println("lookup success for ejb/MyMusicCart");
// a reference to the home interface is shareable
cartHome = (MusicCartHome)PortableRemoteObject.narrow(objref, MusicCartHome.class);
System.out.println("created MusicCartHome object");
} catch (Exception ex) {
System.out.println("Unexpected Exception: " +ex.getMessage());
My web.xml
Code:
<ejb-ref>
<ejb-ref-name>ejb/MyMusicCart</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>asg.MusicCartEJB.MusicCartHome</home>
<remote>asg.MusicCartEJB.MusicCart </remote>
<ejb-link>ejb-jar-ic.jar#MusicCartBean</ejb-link>
</ejb-ref>
anyone encounter this problem before? Please help.. I
I can produce more of my files if you guys feel that is not enough
Message was edited by:
[email protected]

Is the EJB you are referencing part of the same EAR file as your JSP?
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Could not log on to SAP R/3 from XI system to import IDOC/RFC objects

Could not log on to SAP R/3 systems from XI system to import IDOC/RFC objects:
As soon I enter the SAP IP address, system number, user id and passowrd , getting following error.
Details
java.lang.ArrayIndexOutOfBoundsException
STACKTRACE:
com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: java.lang.ArrayIndexOutOfBoundsException
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceBean.openSAPSource(UploadServiceBean.java:79)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0.openSAPSource(UploadServiceRemoteObjectImpl0.java:320)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0p4_Skel.dispatch(UploadServiceRemoteObjectImpl0p4_Skel.java:196)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
java.lang.ArrayIndexOutOfBoundsException
Can anyone help me to solve this issue.

Venkat,
You can download them from http://service.sap.com/download
For 4.6c follow
Download
 Support Packages and Patches
 Entry by Application Group
Select Support Packages and Patches -> SAP Application Components -> SAP R/3 -> SAP R/3 4.6C -> Entry by Component
Mainly You need SAP ABA 4.6C and SAP BASIS 4.6C and SAP APPL 4.6C
The most latest one is Support Package 50. What you can do is after applying half of them you can try to logon from XI system for import of RFC/IDoc.
regards
SKM

Dear support @Apple, I have tried to log in App Store with my Apple ID 3 times but never possible. I have tried to change password 2 times. It was successful.But soon after change of my password, I could not log in App store. It says always incorrect u

Dear support @Apple,
I have tried to log in App Store with my Apple ID 3 times but never possible.
I have tried to change password 2 times.
It was successful.But soon after change of my password, I could not log in App store.
It says always incorrect user name or password. But I input correct ! Because just I successfully changed my password through secret question.
Third time when I tried to change password, the page did not open!
So I checked my connection by netstat , and I trace the IP address ; 17.154.66.17 this is apple IP, but when I trace , it did not show the route. I will copy
Traceroute has started…
traceroute to 17.154.66.17 (17.154.66.17), 64 hops max, 72 byte packets
1 220.224.141.129 (220.224.141.129) 490.517 ms 64.527 ms 94.524 ms
2 115.255.239.97 (115.255.239.97) 65.157 ms 89.128 ms 89.806 ms
3 124.124.251.241 (124.124.251.241) 104.972 ms 79.051 ms 96.948 ms
4 * * *
5 62.216.147.137 (62.216.147.137) 102.266 ms 85.581 ms 88.352 ms
6 xe-0-0-0.0.pjr04.ldn001.flagtel.com (85.95.25.186) 221.939 ms 225.223 ms 236.605 ms
7 xe-11-0-0.edge5.london1.level3.net (212.187.138.53) 231.629 ms 232.045 ms 233.673 ms
8 ae-52-52.csw2.london1.level3.net (4.69.139.120) 373.798 ms 390.412 ms 383.277 ms
9 ae-57-222.ebr2.london1.level3.net (4.69.153.133) 382.653 ms 382.558 ms 376.740 ms
10 ae-43-43.ebr1.newyork1.level3.net (4.69.137.74) 405.088 ms 377.679 ms 386.527 ms
11 ae-91-91.csw4.newyork1.level3.net (4.69.134.78) 378.499 ms 389.733 ms 396.375 ms
12 ae-92-92.ebr2.newyork1.level3.net (4.69.148.45) 391.706 ms 389.605 ms
ae-82-82.ebr2.newyork1.level3.net (4.69.148.41) 381.615 ms
13 4.69.135.185 (4.69.135.185) 380.183 ms 414.398 ms 387.054 ms
14 ae-91-91.csw4.sanjose1.level3.net (4.69.153.14) 384.980 ms 381.375 ms 386.453 ms
15 ae-4-90.edge2.sanjose3.level3.net (4.69.152.209) 377.304 ms 365.457 ms 373.281 ms
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
31 * * *
32 * * *
33 * * *
34 * * *
35 * * *
36 * * *
37 * * *
38 * * *
39 * * *
40 * * *
41 * * *
42 * * *
43 * * *
44 * * *
45 * * *
46 * * *
47 * * *
48 * * *
49 * * *
50 * * *
51 * * *
52 * * *
53 * * *
54 * * *
55 * * *
56 * * *
57 * * *
58 * * *
59 * * *
60 * * *
61 * * *
62 * * *
63 * * *
64 * * *
What it means??
Please help !!
To post this question, I tried thierd time to change password, and before I tried to log in to App store, I logged in this community, and I could !
Then I could finally log in App store also.
But still I feel something is wrong with my connection.
Why the trace route does not show to the apple site ?

This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

Email "Could not log in"

For the past couple days my phone keeps notifying me that my email address could not log in, yet every time I get an email it shows up perfectly fine. It's happening every few minutes and is getting very annoying. I've reset the phone several times and it keeps doing it. Anyone ever have this issue? I have a Z1s.

I recently updated the OS for my Z1 (Sony sent a notification). Since then my email is in trouble, numerous '[email protected] could not connect' messages occur in batches of 8, every 10 minutes or so. Also various 'Email not sent' messages in notifications.
I have tried the advice in this article but the clear cache seems to work and then is restored (presumably from backup).
Any way I can clear this? It's really a problem.

Windows setup could not configure Windows to run on this computer's hardware.

Just over a month ago, I purchased 6 identical Lenovo B5400 laptop computers for a small charity. Each is preconfigured with Windows 7 Professional, with a Win 7 recovery partition, and is supplied with a set of Windows 8 Pro recovery media (the charity
requires Windows 7 installed). I unpacked three laptops, configuring the first one as required by the charity, and using the second and third to experiment with the sysprep / imagex process before applying it to the configured system for migration to the other
laptops. After securing the second and third laptops by taking image backups, I applied sufficient configuration to the second to test the process, then sysprep'd it, and imagex'd it to a network drive, and to a USB stick. So far so good. After using imagex
to apply the custom .wim file to the third laptop, I found it booted up through the "updating registry settings", "starting services", and "installing devices" phases, but when it got to "applying system settings", it
displayed a messagebox titled "Install Windows", with the message "Windows Setup could not configure Windows to run on this computer's hardware". In the last few days, I have explored all the other incidences of problems with similar
symptoms found by a google search, including those on this forum, and tried numerous experiments without getting any further (in most cases not even getting as far)". The sysprep'd image on the second laptop boots ok, going through the same phases up
to "applying system settings", then reboots normally, requests username and PC name, etc, the only defect being that it loses the Realtek display driver (which only takes 2 minutes to restore). I have tried imagex /apply to put the custom .wim file
back on the same laptop it was taken off (the second laptop), and it works exactly the same as it did for the same system immediately after sysprep'ing. The only difference between laptops 2 and 3 is a serial number (QB07523967, and QB07524012). Is there any
reason that this should not work? If it will not, I'm faced with about 100 hours to configure the 6 laptops individually to the charity's requirement.

Hi,
This issue can be caused by hard disk settings in bios or DVD drive or bad SATA cable. Please try those steps below:
Upgrade the BIOS to the latest version; go into the BIOS and activate "Load Fail-Safe Defaults".
If you connect the SATA drives, please set the SATA controller to compatible mode in BIOS.
For more information about this issue, please refer to the article:
http://support.microsoft.com/kb/2466753
Andy Altmann
TechNet Community Support

Installation problem because errer message of "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE"

Respected Sir,
My name is Md. Naushad, contact No- 9436507010.
Sir, hamara ek shopping mall hain, jismein ek server and 5 nos. cash counter clint pc hein, server ju computer hein ismain hamne WINDOWS SMALL BUSINESS SERVER 2008 original os use kar raha ho, yein server calte hue humnein pehele bhi 3-4 bar format korke
dubara ready kiya tha, job koi problem huta tha tu, kuch din pehele se server mein firse problem ho rahi thi (server open nehi hu rahi thi, tu hamne data backup leke pehele jis tarha se server install kiya tha usi tarha se humne install karne ki kusis ki tha,
tu jab humne windows small business server 2008 software ka original disc-1 se installation start karti hu tu kuch der install huke ek error message aaa rahi hein, ju ki "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE."
yein message aa rahi hein, jiske baad server installation bech mein hi band hi jati hein, jiske karon hum server ready kar nahi pa rahi ho, so plz help me, ta ki mein server ku firse install kar sakti ho.
we wait for ur valuable response, plz help us sir.
Thank u.

Hi,
Sorry for my delay.
Based on the error message, please refer to following similar thread and KB, then check if can help you.
SBS
2008 SP2 " Windows Setup could not configure Windows on this computer’s hardware"
“Windows Setup could not configure Windows on this computer’s
hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
However,
please understand that these forums will provide support in English. Since we do not familiar with this language which you use to describe this issue, it is very difficult
for us to help you with your question. If you could ask your question in English, I will be very happy to help.
If the issue is urgent to your business, it is recommended that you contact Microsoft Product Support Services
via telephone so that a dedicated Support Professional can assist you recover the server in a more efficient manner. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/contactus/?ws=support&ln=en-us
If you are outside the US please see
http://support.microsoft.com/ for
regional support phone numbers.
Thanks for your understanding.
Hope this helps.
Best regards,
Justin Gu

"Windows Setup could not configure Windows to run on this computer's hardware" error using MDT

Good day. I am using Microsoft Deployment Toolkit to deploy images to a group of ClearCube R3080D bladed PCs. Below are the server details:
VMware virtual server with Server 2008 R2 Enterprise Service Pack 1
Microsoft Deployment Workbench Version 6.1.2373.0
Management Console 3.0 Version 6.1(Build 7601: Service Pack 1)
Windows Deployment Services Version 6.1.7600.16385
The image I am deploying to the blades is that of Windows 7 Enterprise x64 Service Pack 1 with Office 2010 and a few other third-party applications.
I have pushed this image to literally hundreds of blades successfully. I had a problem with one blade and found that the HDD was faulty. I RMA’d that HDD and installed the replacement. I pushed the same image to the blade and it works fine to the very end
then I receive the error ”Windows Setup could not configure Windows to run on this computer’s hardware.”
I have checked the BIOS configurations on this blade and they are identical to those of several known good blades. In fact, I swapped HDDs between a known good blade and the blade in question. The problem seemed to follow the HDD. Therefore, I assumed that
ClearCube sent a faulty HDD. I had the identical problems with a second HDD from ClearCube so I’m sure that the HDD is fine.
I have read through http://support.microsoft.com/kb/2466753
as well as many other questions posed by other folks and I have yet to find a good solution.
Again, this image works on all other blades that are of the same model and the HDDs are also of the same model. I'm quite confused!
Tony

Tony?
What are you doing posting the same question 5 times, within 3 hours???
http://social.technet.microsoft.com/Forums/en-US/67f72721-da1b-42bc-b373-9064fe1a8245/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/9e7ca626-5b67-4a3f-ade0-4bac767e060f/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/8c508acc-ad40-4608-911c-fbfbc5e293fe/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdthttp://social.technet.microsoft.com/Forums/en-US/a8a98fce-0ddf-4a59-ba8a-9acab7de0c5e/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
If this post is helpful please click "Mark for answer", thanks! Kind regards

Your request could not be completed. Invalid account for this Email Address

I have the App Store Account
It was developed as an account in alternative iClaude.
It was sending a message to confirm the account
But when I put my account
And password
Show me the written page
"Your request could not be completed.
Invalid account for this Email Address"
<Email Edited by Host>

Don't post your email address in public (unless you actually like spam)
I will ask for it to be removed.

Changing the RunAs account without reinstalling Workflow Manger

For SharePoint 2013 installation, I need to change the RunAs account.
is it possible to change the RunAs account without reinstalling Workflow Manger/SB Manager without complete uninstall? Even if I remove all servers from the farm, seems like the RunAs account is always in Management db, so RunAs account is pre-populated
with the old account.
Thank you

To change the RunAs account of the Service Bus, use following PowerShell commands:
Stop-SBFarm
Set-SBFarm -RunAsAccount Domain\Username
$RunAsPassword = ConvertTo-SecureString
-AsPlainText -Force
'<password>'
[RunOnAllNodes] Update-SBHost
-RunAsPassword $RunAsPassword
Start-SBFarm
Then open the Service Control Manager and navigate to Workflow Backend Service and change manually the account.
Restart the Wf Service.
Damir Dobric
developers.de
daenet.de
daenet.eu
daenet.com

Import sim contacts flashing,could not delete messages,battery running down,overheating

import sim was flashing,could not delete messages,battery running down,overheating
answer turned on data roaming briefly took out sim card and replaced seems to be working ok

7. WLAN/VoIP/SIP auto-connect (last question ;-)
there may be some other way but this is how i did it:
on standby screen where WLAN informaion is, click and select disable "net phone" (or name of you VIOP setting). Accordingly when you want to use an internet tel you select "eneble".
/discussions/board/message?board.id=communicators&thread.id=54688

The Health Service could not log on the RunAs account ...event ID 7000 Health Service

Similar Messages

Maybe you are looking for