The image from canvas is in still after installing Decklink Hd 3 extreme but not in the external monitor?

I have installed the Decklink card by the book everything is ok but at playback from time line external video is ok but in canvas is in still.The cables I/O are into a VTR Sony 1500A connected by Rs-422. Thank you

Alin seems to have a different issue Shane, according to his post his external video (via Decklink and DV deck) is absolutely fine ... the problem is that he has no corresponding Canvas playback.
Alin, again, double check your A/V Devices settings:
Final Cut Pro menu > Audio / Video Settings... window >> A/V Devices tab
Look in both Playback Output make sure that Mirror on desktop is enabled (ticked)
This should not be a Decklink driver issue as you already stated above that the Decklink output is good.
Cheers
Andy

Similar Messages

  • How to save an image from canvas to jpeg2000 format?

    good day! i would like some help about jj2000. i wish to save an image from canvas to a jpeg2000 format file. how will i do it using the jj2000? i just need to save it to a file.
    please help!!!
    thank you in advance!
    lrds

    I am not familiar with Jpeg2000, but the easiest way I've found to go from Java to a JPeg file is with Java Adavanced Imaging (JAI) package from Sun. Take a look at it and see if it meets your requirements.

  • New imaged machines fail to complete reboot after install

    New imaged machines fail to complete reboot after install of 10.4.9 image
    Running off both 10.4.9 Server and a 10.3.9 Server machines imaged from the same disk image and different disk images fail to reboot after imaging is complete. All machines go through various stages of reboot some initial most all the way to waiting for finder to boot up on desktop. Nothing is wrong with the items, installed the entire image is installed if you looking at the machines via firewire. All .nbi sets were created under 10.3.9 (to avoid 10.4.9 problems) all disk images with Disk Utility all .nbi with 10.3.9 Network Image utility.
    Anyone any clues been driving me nuts for about a week and I have 500 ibooks to image.
    Also the reference machines for the images are same ibooks that will be imaged, so its the same platform.
    various   Mac OS X (10.3.9)  

    All is the same for me except I used a 10.4.9 server only to create the disk image using Disk utility, and all other work ison a 10.3.9 server. Greay or blue screen on reboot otherwise machines look fine.
    I am having this same issue....
    Order of events as follows...
    Build image on source mac (10.4.9)
    Create image on server for netinstall from source mac
    (10.4.9)
    Set Netinstall image on server via netboot (10.4.9)
    Install Netinstall image on target mac via netboot on
    server (10.4.9)
    Installs fine and says successful.....Apon reboot all
    i get is the grey screen with the apple and spinning
    icon....Sits there and doesn't change....
    On further inspection I notice that there are things
    that are missing off target mac
    very strange....Sounds like a broken System Image
    Utility to me
    Boz
    Mac Pro 2.66ghz / PB
    17inch 1.5/ G4 MDD 1.25DP/ MBP 1.83ghz/   Mac OS
    X (10.4.8)  

  • I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3.  How can I get my scanner to work?

    I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. I did get the printer to work after downloading the printer software from Apple. I used to have 10.4.1.  How can I get my scanner to work?

    Check here to see if there is an updated driver available for it:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Can I upgrade from Photoshop CS2 to CS5 after installing Lion?

    Can I upgrade from Photoshop CS2 to CS5 after installing Lion?   Or should I have done it before installing Lion?

    I think you are missing my point.
    For the last many editions of the creative suite they have each been completely independent. There is no "going over a previous version. Each version stands on its own and is a clean install — as long as you haven't installed that specific version before.
    And "obsolete" is a pretty relative term. With products as complex as the creative suite there are often features (or even whole applications) that change between versions. Many people I know keep earlier versions around, just for that very reason.

  • Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

    Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

    Got the "apple firewire ntsc" choice to show up even if grayed out and "missing" under "audio/visual" menus by recreating choices in Easy Setup under "final cut pro" MENU thank GOODNESS because I was reading horror stories on here about this under another thread with someone trashing preferences, reinstalling and the works and still not getting it to show up...on my search now for an analog/digital converter up at b&h...find it odd that the s video connector wouldn't show the crt monitor when I put both displays through the 3870...I switched it back to see if it worked again when only the one dell monitor display was there and there it is again mirroring the screen display on my desktop...just can't be seen as an "external monitor" in fcp...couldn't find anything specific in the shane ross threads to this. I'm sad the program doesn't just see the s video connection though the 3870 though my computer does fine and will query up at b&h in regard to what might be affordable as far as a digital/analog converter. It's also weird in itself that when I put the two dell monitors on the one card my computer no longer could see the s video crt connection...makes no sense. Will report in later as to what I discover up at b&h as I'm sure there's a world of people out there using this sony crt monitor still even into the upgrades with computers and software so I imagine therein lies the solution. Thanks again and I'll report in as to what hardware might be suggested for me.

  • I reinstalled my computer's operating system.  How do I transfer music from my Ipod to my music library?  It transfered some, but not all my music.  I authorized the computer, but it did not help.

    I reinstalled my computer's operating system.  How do I transfer music from my Ipod to my music library?  It transfered some, but not all my music.  I authorized the computer, but it did not help.

    The sync is one way - computer to ipod.  The only exception is itunes purchases.
    The ipod is not a backup device.
    You need to copy everything back using your backup copy.

  • After installing Maverick, my downloaded movies will not play in Quick Time.  It gives me the following error "You can't open the application "QuickTime Player.app" because it may be damaged or incomplete."  What can I do?

    After installing Maverick, my downloaded movies will not play in Quick Time.  I receive the following error message:
    You can’t open the application “QuickTime Player.app” because it may be damaged or incomplete.  So I tried to unistall QT and I get an error that says, You can not delete this application as it is a requirement for the OSX.
    Well I did find a way to delete it, by going into the various components and one by one deleting it.  Now I reinstall it and  the message is that this Quick Time is for an earlier version before Maverick 7.  SMH....Now what.?

    Hello, terrygav. 
    I would recommend processing a reinstall of Mavericks.
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason H.

  • I purchased flip player to convert wma files i have from a previous laptop and it played some of my music but not some of the others this error msg came up, i payed 30.00 so it could convert? The operation couldn't be completed. (OSStatus error -19000.)

    I purchased flip player to convert wma files i have from a previous laptop and it played some of my music but not some of the others this error msg came up, i payed 30.00 so it could convert? The operation couldn’t be completed. (OSStatus error -19000.)

    Dear Nay2000,
    I have the same problem, my girl-friend saved a bigger Gigabyte library from her old laptop before she sold it, then at some point she realized that she couldn't play many songs that she had transfered. Now, I paid those 30 quid as well, and it doesn't play 99% of the files, that is very frustrating, is there any way you got it revived?
    Regards.

  • I am using I phone 4s, I wish to add my contacts from laptop to my Iphone. i tried different ways to sync. but not success. so pleaselet me know how to add the contacts to i cloud?

    I am using I phone 4s, I wish to add my contacts from laptop to my Iphone. i tried different ways to sync. but not success. so pleaselet me know how to add the contacts to i cloud?         

    Are you using a PC or a Mac?
    What application are the contacts in on your laptop?

  • T400- make the external monitor primary problem.

    I use T400 and Acer p223w monitor.
    From some reason I cannot make the external monitor to be the primary monitor.
    Using the Presentation Doctor I have the option to define the external monitor as the primary but when I test it, it says that I have illegal parameters of color depth and resolution.
    The problem is that the parameters I use are the parameters currently defined on the two monitors (which mean the monitors have no problem working that way).
    Any other color depth resolution combination won’t solve the problem.
    On the other hand using the same parameters if I configure the laptop monitor to be the primary everything works just fine.
    Any idea what causing it and how to solve it will be highly appreciated.

    Since I have a German Windows client I can only guess the wording on the english client, but try the following, which worked on my T500:
    Bring up the mobility center by pressing Win+X
    Click the button to connect an external monitor
    Choose to use the external monitor as the only display
    Now that the external monitor is the only display, it is also primary of course. Now you can use the normal windows display dialog (Right-Click on desktop -> Configure -> Display) to extend the desktop to the internal display which will be secondary then
    done
    In my case windows remembers this configuration and you do not have to do these steps again after reboot or when you reconnect the external monitor.
    Hope this helps for the T400, too.
    Message Edited by pfahsel on 03-18-2009 02:18 AM

  • After install Crystal Report Server 2011, can not access control tool

    After install Crystal Report Server 2011, can not access cntrol tool from web or from application. My server OS is Windows 2008 R2 SP1. I follow the fedault setting. How to fix it?
    Error message:

    Seems like webapps are corrupted, Just redeploy the webapps.
    refer the below thread to do the same.
    http://scn.sap.com/thread/3400477

  • Can't use only the external monitor, leaving macbook open on Lion

    HW
    macbook pro 15-inch, Early 2011
    external samsung monitor, attached using HDMI to Thunderbolth adaptor
    Previous Situation
    With Snow Leopard I was able to keep the macbook screen open but turned off and use only the external monitor. This way I was able to use the front camera to make conference having everything only in the external monitor.
    Current Situation
    With Lion as soon as I open the macbook monitor the image splits between the two monitors and I'm not able to set the extenal one as only one.

    Support today quoted Apple's engineers as saying it is "expected behaviour" under Lion for the MBP's internal display to reactivate upon opening the lid, even if you want to use only your external display. A new version of the clamshell mode-related knowledgebase article (replacing HT3131) is due shortly confirming this.
    This is despite:
    - the obvious temperature-related benefits that were achievable (under Snow Leopard) by opening your MBP lid whilst continuing to output solely to, say, a 27" cinema display
    - potential wifi connectivity benefits of having the lid open
    - the waste of energy and inefficient use of graphics processing power in needlessly running two active screens (ie if running your MBP in clamshell mode would otherwise make it too hot and/or noisy or you need it open for wifi)
    - the negative longer-term impact on the battery and other components from running the MBP any hotter than it needs to be.
    To have any hope of getting the previous behaviour back, we need to lobby Apple to change how Lion handles clamshell mode. Options available to them include changing Lion's expected behaviour or adding a user-selectable option within System Preferences.
    If you haven't already submitted feedback, please do so below. Now the situation has been clarified as intentional, user feedback has become all the more important.
    http://www.apple.com/feedback/macosx.html

  • I have a PowerBook G4 with a non-functioning monitor.  It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

    I have a PowerBook G4 with a non-functioning monitor.  It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work.  It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

    There is no limit to the number of times you can re-install Office on the same computer.
    You can activate by telephone:
    The last paragraph is the relevant bit

  • Adobe Reader 10.1/ 11 get error "has stopped working" on windows 7 after installed 1 or 2 days, but Adobe Reader is fine==

    Adobe Reader 10.1/ 11 get error "has stopped working" on windows 7 after installed 1 or 2 days, but Adobe Reader is fine==

    Turning off the Protected Mode at Startup setting fixed the problem for me. Switched off all protected mode settings in Preferences exited Adobe Reader XI then restarted. Now I can successfully open files without the program crashing. I run the same versions of Adobe Reader and Norton Internet Security on Windows 7 and Windows 8 systems and the problem only occurred on Windows 7.

Maybe you are looking for

  • Apple TV as wireless hard drive?

    This is probably a stupid question, but is it possible to use Apple TV as a wireless hard drive for non-iTunes related files? I'd like to have another back-up for some of my documents, but don't have enough to justify buying time capsule. Is there a

  • Can't Password Protect Configuration Menu

    hi i recently reset my base station and reconfigured everything i can access the net fine and have no problems i created a hidden network and now want to password protect my base station settings in the admin utility since i live in an apartment comp

  • Change item value by process in DML Form: best practice?

    Hi, i have a working DML Form and would like to build an option for choosing values in a popup window and refreshing the page items after closing the popup window. the DML Form has a button which opens the popup window with javascript:popUp2('f?p=&AP

  • Elementary question on Logical SQL subquery

    Hello. I am a newbie using Oracle Business Intelligence Product Version 10.1.3.4.1 (Build 090414.1900). I am trying (and failing) to get something such as this accepted by Answers -> Set SQL - SELECT      A.saw_1     saw_0,      SUM(1)     saw_1 FROM

  • Problem in updsting fields

    hi friends,   i have 2 fields for editing in alv output.when user enter some value in fields   then i save that value in ztable.   my problem is same value get updated in both field what is the problem?   IF r_ucomm = '&DATA_SAVE'.     READ TABLE fin